Re error 8 message/corrupt photo when trying to buy a photo book

I am trying to upload a photo book, which I have done many times before, and this message comes up: "com.apple.chameleon.component
General.error 8." The book stops uploading at page 4 and sites a corrupt photo. How do I find out which photo is causing the problem? The same thing happens when I try to preview the book. Help!

Remove the photos on page 3 and preview - if it works re place the photos on p 3 oneone and preview until you find the problem photo - if the problem is not on p 3 then do the same on p4 and p5 is necessary
LN

Similar Messages

HT4863 I have an error message coming up when trying to send an email which says 'sending the message failed because you're exceeding the limit' can anyone help me to resolve this please

I have an error message coming up when trying to send an email which says 'sending the message failed because you're exceeding the limit' can anyone help me to resolve this please

Try reentering the password in your iCloud mail settings.

TS3274 Error message 5000 received when trying to update ipad software

How do I resolve this error message 5000 received when trying to update ipad software from my computer?

iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

Error message: 50103 (oxffff3c49) when trying to run VILogger

I get this error message: 50103 (oxffff3c49) when trying to run VI logger for data received from the NI USB 6008 DAQ. What does this mean and how do I fix it?

Go through all these threads and post back if that solves your problem or still you stuck up.
Mathan

HT4623 error message 1032 mf when trying to check new mail plus no alert bell

why am i getting wrong pw and error message 1032 mf when trying to check mail plus no alert bell

Try the suggestion that chat2chuck97 suggested here -> I constantly get MFMessageErrorDomain error 1032 when accessing my email on iPad, what is the solution?
chat2chuck97 wrote:
Ok, I just found another site that had step by step. You:
Delete your email account in settings (mail, contacts, calendars)
Go to safari and clear history and cookies
Go back and re enter email account details in mail, contact, calendar settings)
This actually worked for me,
NOTE: you must clear everything before re-entering your email account. That's what I didn't do last time, so probably why it didn't work first time round.
Hope it works for you too.

I am getting an error code of "0" when trying to buy an in app purchase. what is this error?

i am getting an error code of "0" when trying to buy an in app purchase. what is this error?

In your first post you wrote
It is telling me I need 6MB of additional free space
And in your second post
Importing to internal hard drive 6.85GB available
Even assuming that the GB was a typo and should be MB you're still on the hairy edge.

Perameter incorrect error message comes up when I try to get photo

I was using the 3.2 free edition version. It was working WONDERFUL! It is the best program for me. But today, when I went to load my pictures I got this error message "the parameter is incorrect". To get photos I was using a sandisk card reader. I usually just plug the card into the reader and the adobe photoshop album starter 3.2 usually pops up on its own, then I just click get photos. It sooo easy. But today that didn't happen. So I manually opened the program, then went to file, get photo, from reader, and then I see the number of pictures read, but then the error message comes up.
Anyone know what that message means and how do I fix it?
Thanks in advance for any help.

Hi Penny,
Reinstalling the program should not be a problem as this is available online for free download. Just search for "Download Photoshop Album Starter Edition" and you will be lead to appropriate link on the Adobe site.
Cheers!!

Error message from labview when trying to set up the DAQ assistant

I recieve a message from labview when I try to set up the DAQ assistant and select a channel to use. The error I get states "An exception occured within the external code called by a Call Library Node. This might have corrupted LabView's memory. Save any work to a new location and restart labview". Labview then freezes. I have reset the DAQ device in trying to slove this but I still get the same message. How do I solve this?? thanks - mars2006

Hi Mars-
It sounds like your NI-DAQ installation may have become corrupted. I would suggest uninstalling and reinstalling the DAQmx 7.4 driver to correct this problem and ensure that you're up to date. This download is available here: NI-DAQ 7.4
If the problem persists you may want to uninstall and reinstall LabVIEW and then NI-DAQ in that order. The error message will usually give an indication as to which VI the error occurred in. Please let us know which VI is failing if you're unable to avoid the error with these suggestions.
Have a good day-
Tom W
National Instruments

Error message on iTunes when trying to open iTunes Home page?

I'm not trying to find a song or anything, I just want to get onto the iTunes store home screen but this comes up??

Apple's App Store and iTunes Store Currently Experiencing Connectivity Issues
It appears that Apple's App Store and iTunes Store are both currently experiencing connectivity issues. The issue seems to be persistent across iOS and Desktop machines as well as the Apple TV. Attempts to access different parts of the store will either throw a "Cannot connect to App Store" message or "The item you've requested is not currently available in the U.S. store."
This issue does seem to be isolated, so some users may not be experiencing connectivity problems. Most reports on Twitter seem to be focused around the Featured Section and Top Charts.
Trying to purchase some songs, books and movies also throws an error. Interestingly enough, the Apple System Status page reports no issues. Earlier today, some users had troubles downloading the Skype update, but users found deleting the app then downloading it resolved any issues.
Let us know if you are having problems in the comments section below! We'll let you know when things seem back to normal.

Error message I receive when trying to install Quicktime 7.3...

I keep receiving this error message when trying to install Quicktime 7.3. I have removed anything Apple or QuickTime from Add/Remove, but at the end of the installation I keep getting this error mesage:
"The older version of QuickTime could not be removed. Contact your technical support group".
I have no clue what to do to resolve the issue and the software is paid for and has been useless for months due to this error. I'm completely out of ideas. Can someone please help me? I have called tech support but after about 7 hours of help and escalations and everything elser, Apple can't even fix it. The unit is clean, COMPLETELY!
Thank you in advance for any help I am given.
Cheers

+BTW, while on the phone with tech support, I used the MS tool "Windows Install Cleanup", which I'm sure deals with the MSI stuff.+
Yeah, that's usually most helpful (immediately) when you get your message in conjunction with a missing QuickTime.msi message. The "standalone" version of your message tends to be a bit trickier to deal with.
Lets head back into Windows CleanUp one more time, to check on a possibility.
Launch CleanUp ("Start > All Programs > Windows Install Clean Up"). Are there any mysterious blank lines (or lines containing just a version number, but not mentioning a name of any program) showing up in the list of programs in CleanUp?

'Cannot obtain error message from server' when trying to use ODBC

Post Author: Grant C
CA Forum: Data Connectivity and SQL
Hi, I'm developing some reports using Crystal XI on my local PC, using an Oracle 10i back end on a separate server. The SQL for the report is in a method in an oracle package.
When I set the datasource location, selecting 'Oracle Server' then entering the details works fine, and the report runs. However, when I try to use an ODBC connection I get the following error:
Database Connection Error: 'Cannot obtain error message from server.'
The ODBC link is set up as a System DSN, which works fine when I test it. I think I need to use ODBC as some of the reports (which I inherited) seem to fail when run on the Crystal Server, and it seeme to be the ones set up with ODBC which work.
Any thoughts? Thanks.

Hi Mars-
It sounds like your NI-DAQ installation may have become corrupted. I would suggest uninstalling and reinstalling the DAQmx 7.4 driver to correct this problem and ensure that you're up to date. This download is available here: NI-DAQ 7.4
If the problem persists you may want to uninstall and reinstall LabVIEW and then NI-DAQ in that order. The error message will usually give an indication as to which VI the error occurred in. Please let us know which VI is failing if you're unable to avoid the error with these suggestions.
Have a good day-
Tom W
National Instruments

Error message 15:3 when trying to download a pdf form from government site

getting an error message when attempting to download a form from fincen.gov
"There is a problem with Adobe Acrobat/Reader (15:3)

Hi stanleyc93647247,
Are you able to download other PDF files? What browser are you using to download the file? Have you tried a different browser? If you're using Firefox or Chrome, please see http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html
If you're unable to download any PDF files, consider reinstalling Reader.
Best,
Sara

Error message in KP97 when trying to copy planning

Hello,
When we try to copy one version (13) to another (0), we get 2 different error messages:
1) First message:
The planning record already exists
Message no. GP705
Diagnosis
The CO interface is parametrized in such a way that you cannot overwrite planned records that already exist (paramter UPDATE_VALUES = SPACE). Activity record with key 46000KLADMX0000005280PM3SB 2010000 is to be transferred. However, this record already exists in table COSLA.
==> We receive this message because the system detects that there are standard prices already maintained for those activities. However, we used to maintain our activity prices and THEN execute t-code KP97 and we never got those error messages.
2) Second message:
The CO interface has been preconfigured so that existing plan records are not overwritten.
Cost element record with the key
46000KSADMX0000005280 2010010000000720004 RKP1 SCAD
should be transferred, but this record already exists.
==> we receive this message because the system detects that the are budgeted amounts maintained in KP06... but there are no amounts maintained for those cost elements !
I CAN'T use the «reset and overwrite» button, because it's going to erase all my activity prices.

If there is a record and you are trying to copy using KP97, it is supposed to give you an error. If you want to overwrite the record, then you have to select 'reset and overwrite'. I dont understand why you dont want to select it? If you can please elaborate your issue.

Error message ''Disk Full' when trying to export with CS6, works fine in 5.5

I get an error message when I try to export media in Premiere CS6 that I don't have in CS5.5
I use export media for a AVCHD 60fps sequence with a few photoshop images on top of the main track. In the export settings I choose ''match sequence settings'' which gives me a .mpeg I- frame, 1920 x 1080 P, 60fps, quality 50, and a I tick the ''use maximum render quality'' check box at the bottom.
It used to work fine but now I get a message: Disk Full where there is 1.5 TB free on the disk?
I have the exact same sequence made in Premiere Pro CS 5.5 and it exports fine.
It started to act weird after I used the queue for the first time and it went to the CS6 encoder.
Since I used that once and it gave me that message for the first time, even when I try to do the same thing directly in Premiere CS6 , I always get the same error message.
Question 2, is there a place to change the settings from 50 to 100 for the quality of this export profile?
By the way I can export with other profiles without problems but this setting is the only one that I've seen that lets me keep my 60 frames per second in the export
process. (Example: I can export this sequence in the H.264, 1920 x 1080, 30fps, high quality preset, using the maximum render quality in CS6)

Hi Guys,
Thanks for the input but if you read my message correctly and until the end I already can export to other settings and I want an answer to this problem. There's no logical explanation to why this suddenly wouldn't work with the same sequence that it used to do fine with and that CS 5.5 handles fine.
As I said earlier this is the only setting that lets me export my sequence with the 60 fps, that I know of, for further and easier manipulation. As my main camera provides me with these 60 fps I'd really like to be able to have them left in that transition phase and, no, I'm not gonna give up until I know, really, what's going on and solve that problem. If this is a bug it needs to be fixed, if not I want to know what's happening.
Also there's no answer to my question 2: Question 2, is there a place to change the settings from 50 to 100 for the quality of this export profile?
So for you experts out there the question is still hanging.

Error message R6034 appears when trying to open itunes. Problems with C library?

itunes will not open on my laptop. Error message R6034 appears:
"Runtime Error! An application has made an attempt to load the C library incorrectly"
I've uninstalled itunes an tried to reinstall with no success! Please help!

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Re error 8 message/corrupt photo when trying to buy a photo book

Similar Messages

Maybe you are looking for