Re:Error during import of Videos from SD card

Holiday Footage taken with an Olympus u Tough 3000, onto a ' 2Gb SD memory card', and then put through a Kingston Card reader Straight into iMovie (Ver: 7.1.4 ),
Starts to load OK, But after taking the prompted steps to import, (and it tells me that it is importing ), A window flags up saying "Error occurred during import, please REVIEW the imported movies CAREFULLY" ! So i click on "OK" the window disappears, and i am left wondering how the **** am i supposed to do that  ? .
But whats more, is My videos show as a new file in iMovies and i can see all the clips as thumbnails, but when the reader is ejected, and the card removed, Although a window shows My New 'Camera imports' file, i can niether see nor access the films in any way to do anything with them.
I am a Novice to this area of Mac, So please, be gentle with me ! Can someone Exlpain ( Clearly !) whats happening, and what i need to do ?
There are also photos on the same SD card that i will later want to put into ' Image Capture' So hope your replys will, if neccesssary deal with that too should the problem arise.
Thanks in advance: Saligram.

Holiday Footage taken with an Olympus u Tough 3000, onto a ' 2Gb SD memory card', and then put through a Kingston Card reader Straight into iMovie (Ver: 7.1.4 ),
Starts to load OK, But after taking the prompted steps to import, (and it tells me that it is importing ), A window flags up saying "Error occurred during import, please REVIEW the imported movies CAREFULLY" ! So i click on "OK" the window disappears, and i am left wondering how the **** am i supposed to do that  ? .
But whats more, is My videos show as a new file in iMovies and i can see all the clips as thumbnails, but when the reader is ejected, and the card removed, Although a window shows My New 'Camera imports' file, i can niether see nor access the films in any way to do anything with them.
I am a Novice to this area of Mac, So please, be gentle with me ! Can someone Exlpain ( Clearly !) whats happening, and what i need to do ?
There are also photos on the same SD card that i will later want to put into ' Image Capture' So hope your replys will, if neccesssary deal with that too should the problem arise.
Thanks in advance: Saligram.

Similar Messages

  • Error when importing photos/videos from iphone 4 into Picassa.....

    When attempting to import photos and videos from iphone 4 into Picassa (v3.8) I get the following error message:
    "An error has occurred while attempting to import. Either the source is unavailable or the destination is full or read only. (1)"
    Any thoughts? I know this is an iphone specific issue as I was successfully able to import from another camera.
    P.S Quicktime up to date and quicktime movies checked in Picassa.

    I have the same issue. It started only after the most recent iPhone update though, leading me to think it's the phone, not iPhoto.
    The pictures that do import are streaked/blurry with terrrible colour. I can still send them via email but they're smaller files.
    Does anyone know another way to get my full-res pictures off my iPhone?
    [edit] I found out that I could use Apple's Image Capture software, which worked like a charm but the pictures themselves are a mess. I'll have to try resetting.

  • 'Error during import of clipboard contents' runing from ITS server

    Dear Friends,
    when I execute the report and smartform program from ITS server it is giving a error message 'Error during import of clipboard contents' in the web page.
    Please guide me how to resolve this issue.
    Thanks & Regards
    Tapas Dutta

    Hi Victor,
    Good Morning.
    Can you please confirm you are installing new SAP NW Java system on the same host where SAP NW ABAP is running or you are trying to install SAP NW JAVA as addin installation to existing SAP NW ABAP?
    Regards
    Naveen Garg

  • Error During Import: File Could Not Be Imported

    I am trying to load some .AVI movies from my digital camera into iMovie; most of them will, but 1 or 2 for some reason will not. I have played some of these videos on my old G3, which I replaced with this new computer; most loaded in OK.
    The clips that won't load look smaller than the others when playing (don't know why). I played the movies and converted them to Quicktime again in MPEG Streamclip and they played fine (also in VLC PLayer, FWIW).
    I am getting this error message: Error during Import: File Could Not Be Imported.
    Also, I am trying to change the orientation of one clip that I inadvertently shot sideways; I did this in Bitlist but it won't load now into iMovie. Is there away to change the orientation in Quicktime (I'm not buying QT pro) or another free converter that will work?
    Thanks in advance...

    try to ...
    * open the avi/mpegs in Streamclip
    * choose 'DV stream' as export option
    * in the 'DV stream' dialog, you're offered the option 'turn'.. rotate in the wanted direction and choose '75%' size to get all into the video...

  • Variable not set (error 91)/Error during import (error 102)/execut bat file

    We are on BO 11.5.0.0 and using the COM SDK with Visual Basic to run multiple reports (sometimes multiple flavors of the same report) through a bat file.
    If we run the reports single-threaded through the bat file, the reports run fine.  However, if multiple versions of the bat file start at approximately the same time, we get one of two errors:
    91 Object variable or With block variable not set
    102 Error during import document -
    Here's the part of the code with the problem:
    Dim BOapp As busobj.Application
    Dim receiveDoc As busobj.Document
    Set BOapp = New busobj.Application
    BOapp.Interactive = False
    BOapp.Logon strUser, strPass, strFromSystem, "Enterprise", False, False
    BOapp.Visible = False
    Set receiveDoc = BOapp.Documents.OpenFromEnterprise(strFromRep, strFromFolder, boFolder)
    receiveDoc.SaveAs (strDocumentPath & strFromRep & ".REP")
    Values for the following variables are passed in from the bat file:
    strUser
    strPass
    strFromSystem
    strFromRep
    strFromFolder
    strDocumentPath
    If it fails on the OpenFromEnterprise statement, we get the 102 error.
    If it fails on the SaveAs statement, we get the 91 error.
    Running it through debug hasn't helped, since we are running only one report.
    Any thoughts on what could be going wrong?
    Thanks in advance

    I have tried this running the VB code on my desktop (outside of the bat file) and nothing out of the ordinary occurs.  The VB code runs fine with only one occurrence.
    I had seen on other posts "ThisDocument" and didn't know if it would be applicable in this situation.  I also wasn't sure how it should be used based on the rest of my code.  Would "ThisDocument" make a difference?
    Thanks again

  • Error when importing IDOC structure from SAP - Control record missing

    Hi!
    We are hitting problems when importing IDOCs from SAP into the Integration Builder. The import ends successfully but when we drill into the IDOC structure we get a message: <b>Schema for type EDI_DC40.ASN_OUT.DELVRY01.Z1DELVRY (category Data Type) not found</b>. This is only happening for one specific IDOC type only. We have checked all we can think of but cannot get this to work. Any help would be very much appreciated. Of course, points awarded for any good ideas. Thx, Duncan

    Hi Duncan,
    Taka a look at these threads which address similar issues:
    Error during import of FIPARQ01 Idoc
    Error during IDoc Import
    Importing idocs:
    http://help.sap.com/saphelp_nw04/helpdata/en/2b/a48f3c685bc358e10000000a11405a/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/78/21753251ce11d189570000e829fbbd/content.htm
    Hope these help!.
    Cheers,
    Chandra
    Message was edited by: chandravadhana gopalakrishnan

  • Why do i getThe following clip encountered an error during import and is still referencing media on the camera:

    When importing in FCPX 10.1.3 I get: The following clip encountered an error during import and is still referencing media on the camera:  ??? anyone

    I get this sometimes too, when importing from P2 cards.  Sometimes it takes me a few tries to get it imported.  I have noticed that it seems to work better when I actually mark an IN and Out for the clip, but that's not totally a solution.

  • Message: The following clip encountered an error during import and is still referencing media on the camera:

    I am getting this message when I try to import files from Canon C100: The following clip encountered an error during import and is still referencing media on the camera:
    These are AVCHD files and it seems to be happening randomly.  With different clips as I try to import...happening both with regular importing and with Create Optimized Media...
    It just started happening yesterday-never had this problem before and have uploaded countless times with this camera and system. THanks.

    Update: OK, I just tried to import the footage into another hard drive (an internal hard drive) and it seems to be going fine now.  Maybe something is corrupted on the external hard drive I was importing into...wierd.

  • Error during importing photos

    For some reason, I get an "error during import" message when i try to drag my photos into my movie. (i've done it before successfully) They show up in my photo library when i click on the photos tab in imovie, but it wont let me import them. any thoughts?

    WHen I tried to drag all my pictures of that Album (or one at a time) from the iMovie picture pane displaying that Album, I get an error
    Why are you doing this? Every album (in fact, every photo, whether in an album or not) in your current iPhoto library is directly available from the pop-up menu when the "photos" tab is selected in iMovie. There is nothing that needs to be imported. Only photos that have not been previously incorporated into iPhoto need to be dragged to iMovie.

  • Can I import avchd videos from canon into Imovie'11

    can I import avchd videos from canon into Imovie'11

    actually the only error in the system logs I see is..
    11-02-27 10:59:49 AM iMovie[90311] NSEnumerateMapTable: map table argument is NULL

  • Error during Import (-2126)

    I have imported Quicktime files from my computer into iMovie before (clips orginally from my digital camera) with no problem. However, when I go to import now I get the message "Can't open file "xxxx.AVI"; skipping it and continuing" then right after the message "Error during import. The file could not be imported (-2126)" If anyone knows why this would happen and I how I can fix it, that would be amazing.... Thanks in advance!!
    ** I have Quicktime version 7.0.1 and iMovie 4.0.1 if that helps.
    iMac G5   Mac OS X (10.3.9)  

    iMovie does not work with AVI files. You have to convert the file to a format that iMovie understands.
    Start here...
    http://www.danslagle.com/mac/iMovie/qt_plugins/3000.shtml
    Patrick

  • "Error During Import" after authorization

    HI all,
    I transferred a few songs from my desktop to my laptop. The songs play fine in iTunes after the transfer. When trying to use the music in iMovie, it asks for authorization (I only have my songs authorized on 1 computer). I give my password and a messaage pops up saying that the authorization was successful. I try to import the song into iMovie and the message I get is:
    *Error During Import*
    The file could not be imported: The file “(file path)” isn’t authorized for this computer.
    Any ideas?
    TIA!

    Hi c
    Only way around I use is:
    • in iTunes export out as audio-CD .aiff
    • use this in Your movie project
    Yours Bengt W

  • Error while importing an RFC from R/3

    Hello,
    I am getting the following error while importing an RFC from an R/3 system in the Repository:
    ***Ready for import***
    Import started...
    /XXX/YYY_CREATE_NOTIFICATION:
      + com.sap.aii.ibrep.sbeans.upload.RemoteUploadException: PERMISSION_ERROR
    Import failed with 1 error
    Does any one know what is required? Is it missign authorizations on the R/3 side or on the XI side?
    Thank you,
    Sumant.

    Hi,
    please check your User (used for importing RFC) authorizations,
    it should have RFC authorization .
    Thanks,
    Madhav
    Note: Points If Useful.

  • Error importing SharePoint site collection - "there is an error during importing the Roles tag"

    Hi, we are having trouble restoring a SharePoint 2010 site collection using our DPM 2012 installation. The recovery process goes fine (restore of the database, attach to the sql server, export into WFE's filesystem) and the last phase, the SharePoint import,
    seems to end with an exception. We see this in the WssCmdletsWrapperCurr.errlog file:
    Caught Exception while trying to import Url .....
    Exception message =
    There is an error during importing the Roles tag
    Exception Stack =
    at Microsoft.SharePoint.Deployment.ReadAttribute.String(....
    It looks like it is a SharePoint import issue, but I'm not sure. We have tried to restore the site into an empty one, and the exception appears again, although it *seems*  that the content has been recovered. We have imported using the security info
    on the recovery point.
    I've searched for that error message in the Net but I've been unable to find anything appropriate.
    Do you have any hints?
    Thanks.

    Hi, we are having trouble restoring a SharePoint 2010 site collection using our DPM 2012 installation. The recovery process goes fine (restore of the database, attach to the sql server, export into WFE's filesystem) and the last phase, the SharePoint import,
    seems to end with an exception. We see this in the WssCmdletsWrapperCurr.errlog file:
    Caught Exception while trying to import Url .....
    Exception message =
    There is an error during importing the Roles tag
    Exception Stack =
    at Microsoft.SharePoint.Deployment.ReadAttribute.String(....
    It looks like it is a SharePoint import issue, but I'm not sure. We have tried to restore the site into an empty one, and the exception appears again, although it *seems*  that the content has been recovered. We have imported using the security info
    on the recovery point.
    I've searched for that error message in the Net but I've been unable to find anything appropriate.
    Do you have any hints?
    Thanks.

  • Can't import live video from Sony PD 170.

    Just got Final Cut Pro X. In a New Event I am able to import live video from the new MacBook Pro computer's built-in camera and pre-recorded video from my Sony PD-170 camera. However, when trying to import live video from the PD-170, the program only APPEARS to do so--the clips never show up once I close the import window. Any suggestions?

    I think iMovie is corrupted. I would like to try to uninstall iLife 11 but when I put in the disc there is no uninstall option. I tried trashing iMovie from applications and reinstalled all of iLife (I believe wasted space on my HD) but the issue remains. (Maybe because I didn't delete the receipts?) iMovie can not see any devices or use iSight for capture...

Maybe you are looking for