Re: Error message with Recovery DVD creator

A few days ago i have purchased a new laptop Toshiba L650 12Z. I wanted to make the recovery dvd's.
I run the recovery DVD creator and after a while it gives the error "The file can not be read. E: / sources / boot.wim Error Code: 020150-20-00000000)" and the process stops. This I have tried several times, with the necessary waste of DVDs.
Does anyone know what to do in this situation.
Thanks

Last step should be option given by Jeka. For recovery DVD creation I have always used DVD-R medias from Verbatim or TDK and have never had such problems.
Please try the same and use DVD-R medias only.

Similar Messages

  • Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the fil

    Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the file goes very well with chapters and scenes before burning). thanks very much, response appreciated, Alain

  • My mac book pro does not start but has error message with a question mark on screen. took it in and was told probably the hard drive as could not reconize it so bought new one but still not connecting.what do i do

    My mac book pro does not connect but shows an error message with a question mark on the screen.I took it to a retailer that said it was not reconizing the hard drive.He said i needed a new hard drive but it may be something else as well but he was sure a new hard drive would fix it.So putting faith in someone who deals with them i purchased a new hard drive to find it was still not working although he said the computer did know reconize the hard drive and i may have to send it away to get it checked .After already paying 120 pounds for a new hard drive and they wanting another 80.00 pounds to diagnose it i am a little sceptical.
    That's why i am interested on anyone's help.

    Welcome to the Apple Support Communities
    I think that your Mac detects your hard disk, but the problem is that your new hard disk doesn't contain any operating system, so your Mac doesn't find any bootable partition and you see a question mark.
    If your Mac came with DVDs, insert the Mac OS X Install DVD and hold the C key while your Mac is starting. Then, just install Mac OS X. If the hard disk isn't prepared to install Mac OS X, you will have to erase it using "Mac OS Extended (Journaled)". See > http://pondini.org/OSX/DU1.html

  • How to recover my notebook at factory - out of box settings with recovery DVD's.

    Due to hard disk crash i formatted my hard disk, also deleted all partitions including HP Tools and HP Recovery partitions. But I have my recovery DVD of my notebook that i have created at the time of notebook purchase.
    When i Inserted First Disc of my RECOVERY DVD's ..WIndows installation started and recovery manager shown the error : "The System recovery media does not support this computer. you are not able to restore this system with media."
    Please assist me to how to recover my notebook at factory - out of box settings with recovery DVD's.
    I have hp pavillon dm4-1222Tx Entertainment notebook, Genuine Windows 7 64-bit. Thanks

    Hello Anshul-Gautam,
    Please take a look at this document, and let me know if the troubleshooting steps help resolve your recovery issues.
    Good luck!
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • My Matshita Optical drive gives me error messages that burning DVD's is NOT supported ?

    I record and burn audio weekly. I dried burning DVD projects and i get the repeated error message the the drive does not support DVD burning.
    Same result trying to burn from the Finder or Disk Utility. Anyone have a work around?

    Do you get this error message with all current burn attempts, or simply with your most recent project?
    If not, a PRAM reset has been known to be helpful.
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Immediately press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.Continue holding the keys down until the computer restarts, and you hear the startup sound for the second time.
    Release the keys.

  • I replaced the hard drive to a 30gig on my Ipod 4th gen. click wheel but it is still not recognized on my computer or in itunes......I get an error message with a folder and "!"....what can I do to fix??

    I replaced the hard drive to a 30gig on my Ipod 4th gen. click wheel but it is still not recognized on my computer or in itunes......I get an error message with a folder and "!"....what can I do to fix??

    Have you recharge the battery for at least 2 hours, or just leave it connected for 4 hours?
    (When you replaced the Hardisk, you should also replace the battery.)
    Some other iPod SSD sites, says that you may have to format the CF in FAT32, as Mac dont read NTFS drive so if Windows is the 1st PC that your CF is connected, it may be formatted to NTFS.
    You can try erasing the CF using Disk Utilty, so that Mac can recognise it. (but not Windows)
    Have a nice day!

  • Error message with hyperlink

    Hi Champs,
    I have requirement in which I need to display an error message in SRM Portal.The error message is maintained in the SAP SRM system and can be viewed through SE91.
    We are using SRM 4.0 Version.
    I need to display the below error message with a hyperlink to a particular site:
    Profit Center of plant and CO do not match, CO belogs to plant XXXX (item link)"
    Is it possible to have hyperlink with an error message.
    Thanks
    Regards,
    Nishant

    Hello
    It is no possible.
    But you may add hyperlink into documentation for message (SE91 -> Goto -> Documentation -> Long text).
    In this case hyperlink will be available after double click on error icon in left bottom corner.
    PS: and not duplicate posts.

  • Error message with offer to download the 4.1.B.0.587 update and note: "installation not possible" (because it's already there) cannot partition SD card

    Hi - Recently I put the latest update on my LT15i (4.1.B.0.587), after this I rooted the phone, and everything seemed okay. But since then I keep getting an error message with an offer to download the 4.1.B.0.587 update and the note: "installation not possible" (because it's already there). The news line on top shows a red exclamation mark all the time. It seems to me that it is due to this error that I cannot partition my SD card. Does anybody have an idea how to fix that? Thanks much in advance, and happy holidays - nerissa

    Moved thread to Android development.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Displaying an error message with a link to the error field

    By default, ADF validation usually displays an alert with an error message and a link to the error field.
    I have some custom validations where I finally display the error message with this:
      public static void MessageError(String messageText){
        //String messageText="No se han encontrado estos datos";
        FacesMessage fm = new FacesMessage(messageText);
         * set the type of the message.
         * Valid types: error, fatal,info,warning
        fm.setSeverity(FacesMessage.SEVERITY_ERROR);
        FacesContext context = FacesContext.getCurrentInstance();
        context.addMessage(null, fm);
    My customer is asking for displaying a link to the error field in this kind of error alerts as standard errors do.
    Is there any way to get this ?

    Can't you include this in your message?
    You may want to check Duncan's blog https://blogs.oracle.com/groundside/entry/get_more_from_your_messages whichgives more inside on what you can do
    Timo

  • HT4910 My iCal has frozen after I tried to paste info from an email into a reminder.  I get a "server reports an error" message with what I tried to paste in the box.  Calendar is frozen and will only close by forcing it.  Any help?

    My iCal has frozen after I tried to paste info from an email into a reminder.  I get a "server reports an error" message with what I tried to paste in the box.  Calendar is frozen and will only close by forcing it.  Any help?

    Did another window open with the pasted information?  If so, try hitting "enter/return" key and "delete" key at the same time.  That should get rid of the current action on the ical, the extra window should go bye-bye, and all should be fine with the world.

  • Error Message with multiple line

    Hi
    How to display a error message with multiple line?
    Example
         Goods movement not possible for material 101
         Goods movement not possible for material 102
         Goods movement not possible for material 103
    is it possible is ABAP? If so please advice me.
    Best Regards
    Asheek

    Hi Anoop,
    You can use same thing like this
    I suggest write ur message through this.
    First set the obecj.
    CALL FUNCTION 'APPL_LOG_SET_OBJECT'
    for local memory
    FUNCTION 'APPL_LOG_WRITE_MESSAGES'
             EXPORTING
                  OBJECT              = OBJECT
                  SUBOBJECT           = SUBOBJECT
                  UPDATE_OR_INSERT    = UPDATE_INSERT_FLAG
             TABLES
                  MESSAGES            = MESSAGE_TABLE
             EXCEPTIONS
                  OBJECT_NOT_FOUND    = 1
                  SUBOBJECT_NOT_FOUND = 2
                  OTHERS              = 3.
    the call for physical memory
    CALL FUNCTION 'APPL_LOG_WRITE_DB'
    In this process you only need to provide the Itab with error messages.
    Reg,
    Arpit

  • Can't figure out what is wrong with recovery DVDs

    Last year, right after turning my laptop ON, I've created 4 DVDs as such: http://i56.tinypic.com/6i79rn.jpg
    Recovery DVD Disk 1
    Recovery DVD Disk 2
    Recovery DVD Disk 3
    Windows Recovery Environment 64-bit
    My Laptop is Qosmio F60-14R, with Windows 7 Home Premium.
    Now all I want to do is format my laptop and re-install windows 7 Home premium using those 4 DVDs. However I can't figure out why I cannot re-install or get the laptop back to the factory state.
    This have wasted 8 hours straight of my time and frustrated me by great deal. Can you kindly tell me what I have to do? I am lost!

    Here is what I have done so far:
    I inserted 'Windows Recovery Environment (64-bit)' DVD and booted the laptop from it.
    First thing that loads up is a window with two options:
    - Toshiba Recovery Wizard
    - System Recovery Options
    Taking Toshiba Recovery Wizard as choice, clicking Next.
    It asks me: "Please set 1st Recovery Media and press Next to Continue.
    So, I insert Recovery DVD 1 and then click Next. However it ejects the disc drive (seems Recovery DVD 1 is not the correct Disk!).
    So I repeat the same process with Recovery DVD 2 and Recovery DVD 3 and again the Disk Drive ejects the Disks.... As a desperation attempt I even put the Windows Recovery Environment Disk inside but that as well get ejected.
    Okay, so the Toshiba Recovery Wizard is not the right choice 'it seems'.
    So, I restart the laptop and inserted 'Windows Recovery Environment (64-bit)' DVD and booted the laptop from it.
    First thing that loads up is a window with two options: (First choice failed, now trying second choice)
    - --Toshiba Recovery Wizard--
    - System Recovery Options
    So, choosing System Recovery Options this time and clicking Next. I Choose US as Keyboard, then click Next. A small window appears which gives me two further options:
    - Use Recovery tools that can help fix problems starting Windows. Select an Operating System to repair.
    - Restore your computer using a system image that you created earlier.
    So, I already tried the first choice and it takes me to another window with several recovery tools. One of the tools is System Image Recovery but when I click it, it gives a Warning messagebox that says:
    Windows cannot find a system image on this computer. etc.
    But when I insert every disk, still the warning messagebox shows up as if all the four recovery DVDs are irrelevant.
    So, it seems the first choice doesn't lead me anywhere. So, remains the second choice:
    - Restore your computer using a system image that you created earlier.
    Turns out it is exactly the same 'System Image Recovery' from first option mentioned few lines earlier. So, there you have it, checkmate.
    Please guide.

  • I try connecting to I tunes i get an error message with the error message IxE000068 any ideas

    my ipod touch will continually be in the spinning wheel like it is shutting down mode and occasionally go to the start up screen nothing else. i tried connecting to the itunes and got an error message with the code IxE8000068 and saying itunes could not be connected to this ipod

    Did the error number really start with
    iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

  • HT4236 I get an error message with I try to plug into itunes;  This iPhone cannot be used because the Apple Mobile Device service is not started.

    I get an error message with I try to plug into itunes;
    This iPhone cannot be used because the Apple Mobile Device service is not started.

    http://support.apple.com/kb/TS1567

  • Show error message with multilingual in ADF Jdeveloper 10g 10.1.2

    Hi
    I want show error message with multilingual in my application, but i don't know how to do.
    Can you give me some solution.
    I live in vietnamese.
    Thank a lot.

    When i using code
    ResourceBundle bundle = ResourceBundle.getBundle("MyResources",Locale.ENGLISH);
    String key = "hello";
    String s = bundle.getString(key); // Hello
    key = "bye";
    s = bundle.getString(key); // Goodbye
    then there is error follow
    java.util.MissingResourceException: Can't find bundle for base name MyResources, locale en
         at java.util.ResourceBundle.throwMissingResourceException(ResourceBundle.java:804)
         at java.util.ResourceBundle.getBundleImpl(ResourceBundle.java:773)
         at java.util.ResourceBundle.getBundle(ResourceBundle.java:538)
         at mypackage1.Application1.main(Application1.java:21)
    Can you show where error or you have some code about that issue, you can show me

Maybe you are looking for

  • GPS no longer works on my 3G

    The GPS on my Iphone 3G no longer works after sotfware update. Applications like MotionX- GPS and 3GPS worked great before the 3GS and 3.0 was introduced now since the software update the apps cannot get a GPS fix. Same for the map app that comes wit

  • Problem with JDOM and euro character

    Hi, I have an xml file including euro characters (�) and starting with : <?xml version="1.0" encoding="ISO-8859-15"?> as it should probably be. However, my problem is that (JDOM and) SAXBuilder doesn't recognize the euro characters and replace them b

  • NativeQuery Result Entity

    To make a join query of two or more tables from database I wrote a native query and execute that query. Th entity manager is obtained from a container managed session facade. The tables at database are like table A(column1, column2, column3) table B(

  • Wireless card deadlocking computer

    *TL;DR summary:* high airport card usage results in a deadlock of my mbpro after a few minutes, not even disk access works. This always ends in me holding down the power button for 5 seconds to force restart. Description Starting about 3 months ago m

  • HT1947 i have a ipod touch,1st generation. how do i transfer the music to someone elses itunes library

    i have an ipod touch 1st generation. how do i transfer its music to someone elses account