Re: Error relating to material code when raising PR
Dear all,
I came acrossed the error "Material not subject to inventory management in plant XXXX" when trying to raise a PR by entering the material code. Checking the material created, the material is active and has been properly maintained by Purchasing department. How come I am getting this error when raising a PR with the material code?
Pls assist. Appreciated.
Thank you in advance.
Hi,
in the MM03 , click the blue 'i" button, there you can see the material type..
Then go to OMS2 & Select the mat type and at the left hand side you can see the qty & value update..
Put tick for value update for your plant for this mat type..
Thx
Raju
Similar Messages
-
While pgi there is date error related to company code?
I created a sales order and transfer order, then trying to post goods issue, I am getting this issue
"Good movement: Error log
Item Material Description Delivery qty UoM Batch
000010 E M7 053 adafdfasd 10 PC
Posting only possible in periods 2002/11 to 2002/10 in company code 1000"
Could anybody tell, where to change to solve this problem?
Fully rewarded.
Thanks,
Manohar.Hello
Follow these steps for the resolution of your query.
<b>Step 1:</b>
Check the t-code 'OMSY'
As to what is the period. also see in controlling are what type period schedule u selected...
In the t-code, select the the year and period for your company as 2007 amd 01.
<b>Step 2:</b>
Next in the using the t-code 'MMPV' close the period for your company by entering the company code and the current date.
Once these are done, you would be good for posting in the current period.
Regards,
Gauravjit.
Reward points if the solution is helpful -
Hi,
I am using an IDES system share of our company. Whenever i am assigning a material in the goods receipt or in Orders. The material is automatically change and take a predefine text say "RADIO" and followed by the material code.
I feel someone has done some mistake and its affecting all the material code. And surprisingly only the external material code RADIO is possible to do any transaction . If I put a material code say 10002 system automatically converted into RADIO0000000001002 to make the 18 character and giving an error that material code not exist in the MARA table.
What could be the reason please help.
DPClosing the thread
Edited by: DP SINGH on Jul 22, 2010 7:10 PM
Edited by: DP SINGH on Jul 22, 2010 7:14 PM -
Error relating a company code to a valuation plan
Hello,
I am trying to relate my company code to a valuation plan in OAOB transaction but it appears the error AC551. I have checked it and I don´t know where could I enter the value for VAT indicator for nontaxable transactions.
Could you help me with this issue?
Thanks a lot!Hello
The result of the check of company code shows that important global
parameters from Financial Accounting are missing for Asset Accounting.
One or more of the following fields are affected:
Currency
Chart of accounts
Fiscal year version
Input tax indicator for non-taxable transactions
You cannot use the company code for Asset Accounting without this information.
Please check input tax code for non-tax relevant postings
(for example depreciations) can no longer be maintained via
IMG -> Fin. Accounting -> Asset Accounting
Maintenance is done via the IMG using the following path:
Financial Accounting -> Financial Accounting Global Settings -> Tax on
Sales/Purchases -> Posting -> Allocate tax codes for non-taxable
transactions or transaction OBCL. Note 47055 is for your reference.
regards
Ray -
Access denied error in feature receiver code when deploying-activating custom timer job feature
hi,
am creating a sp timer job for a updating a list.when i write this code in a the event receiver featureactivated method, and when i activate this feature , am getting access denied error.
but, when i deploy this timer job [ without feature receiver] through powershell, it works.
i didnt run this feature receiver with runwithelevatedprivileges delegate - i think this wlll NOT solve the issue.
from one of the posts i seen that, current logedin user needs to be part of config database roles. i didnt understand this point. how can i add my current loge din user into the sp_config database roles? is it through SSMS 2012?
or
is there any way to achieve without feature event receiver?
otherwise i will be forced to write my business logic in a console appln and add this exe in a windows scheduler.!
help is appreciated!hi Waqas,
i have ran that powershell script you have pointed to me.
function Set-RemoteAdministratorAccessDenied-False()
[System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint") > $null
[System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint.Administration") > $null
# get content web service
$contentService = [Microsoft.SharePoint.Administration.SPWebService]::ContentService
# turn off remote administration security
$contentService.RemoteAdministratorAccessDenied = $false
$contentService.Update()
now i need to test the functionality from the event receiver after Activate feature button click.
BTW, i have written a console appln for my business logic and created an exe.
also, should i test it with a web application levels coped feature instead of site collection level feature? this thread talks abt the same:
http://social.technet.microsoft.com/Forums/en-US/f41810ec-2348-436d-a574-c29656f3a567/access-denied-error-when-running-timer-job-from-feature-activated-event?forum=sharepointgeneralprevious
thx -
Quotation creation through DP81 Error related to Material maintain Inquiry
Dear All,
This is related to Quotation creation through DP81.I have maintain A DIP profile and as per my Easy Cost Planning (ECP) in Project System it is capturing in sales price in DP81.Please note that I have maintain three (3) line item in the sales Inquiry.Based on that 3 line item we have maintain three different WBS element in ECP and it is attached to corresponding material no in VA12.
Now in DP81 system showing the three line item but if we go for Quotation creation one material no is coming for the three line item with different price value.
I have also maintain these three material in DIP profile in ODP1.Please note that the first material no maintained in DIP profile that is coming not the other material no.
Please through some light as in our case there are several line item is maintained in quotation.So is it possible to make Quotation with different item and where I have to maintain these material no.
Thanks
Suman Sardari checked the characteristic for cost element & Material for CR, MD & Str, i created sets for cost element & the material & i determined the material which i required in the quotation. I am getting an error "no expenditure item found" , can you suggest me now.
-
In Purchase Order Line item Maintaining Serial Numbers for Material Codes
Dear Gurus,
We have a business process in legacy system for Purchase Order like in PO line item, Material code with description, Quantity, unit of Measurement, Serial Number Start and Serial Number End is maintained, for example for Material code when we enter the data AXMLN00001 in Serial Number Start column, if the Qty 500 is maintained, by default system will calculate AXMLN00500 in Serial Number End column.
We understand that in standard SAP we donu2019t have this option of maintaining Serial Number Start and End in Purchase order Line item. Please let us know how this can be mapped and is it advisable to create two Z fields in EKPO table or else can we make any development.
Suppose if this is not possible in SAP for PO then in Banks if we want to place a order for Cheque books how we can maintain Start and End Serial Numbers to print in cheque books.
Also client is not agreeing to maintain manually Serial numbers in item text.
regards,
DhanuAamir,
When the PO Item was created say for example Material had Valuation category "Y" and latter you wanted to change the category to "Y". Now system would have check for all open PO's etc...based on this you must have set Deletion Indicator to this Line Item to allow valuation category change in material master. Now when this Item got created in the table level (EKPO), system updates the valuation category "Y". Currently this valuation category is not active so it would not allow you to perform removal of deletion indicator as program cannot automatically nor you have an option to manually update the valuation category to this Item.
Regards,
Prasobh -
Error #1009 in as3 code to install an Air application from an embedded swf.
Hi, I am getting error #1009 in my code when i try to install the application. I am new to action script and below is the code for my installer.
var airSWF:Object; // This is the reference to the main class of air.swf
var airSWFLoader:Loader = new Loader(); // Used to load the SWF
var loaderContext:LoaderContext = new LoaderContext();
// Used to set the application domain
var paramObjAppid:Object = LoaderInfo(this.root.loaderInfo).parameters.appid;
//var paramObj:Object = LoaderInfo(this.root.loaderInfo).parameters;
loaderContext.applicationDomain = ApplicationDomain.currentDomain;
airSWFLoader.contentLoaderInfo.addEventListener(Event.INIT, onInit);
airSWFLoader.load(new URLRequest("http://airdownload.adobe.com/air/browserapi/air.swf"),
loaderContext);
function onInit(e:Event):void
airSWF = e.target.content;
var url = '';
var qty = '';
var appID = '';
var pubID = "";
var runtimeVersion = "3";
var tf:TextField = new TextField(); // create a TextField names tf for debugging
tf.autoSize = TextFieldAutoSize.LEFT;
//tf.size = 4;
tf.wordWrap = true;
tf.border = true;
addChild(tf);
try
var keyStr:String;
var valueStr:String;
var paramObj:Object = LoaderInfo(this.root.loaderInfo).parameters; //set the paramObj variable to the parameters property of the LoaderInfo object
for (keyStr in paramObj)
valueStr = String(paramObj[keyStr]);
if ( keyStr == 'qty' ) {
qty = Number(valueStr);
if ( keyStr == 'url' ) {
url = escape(valueStr);
if ( keyStr == 'appid') {
appID = valueStr;
catch (error:Error)
var arguments:Array = [qty];
launchBtn.addEventListener(MouseEvent.CLICK, fl_MouseClickHandler_2);
function fl_MouseClickHandler_2(event:MouseEvent):void
airSWF.getApplicationVersion(appID, pubID, versionDetectCallback);
function versionDetectCallback(version:String):void
if (version == null)
trace("Not installed.");
tf.appendText('Not Installed');
try {
airSWF.installApplication(url, runtimeVersion, arguments);
catch (error:Error){
tf.appendText(error.toString());
else
trace("Version", version, "installed.");
tf.appendText("appID="+appID);
try {
airSWF.launchApplication(appID, pubID );
catch(error:Error) {
tf.appendText(error.toString());I managed to figure out what was causing the issue, I had a particular png image in my projects assets folder that seemed to be the culprit. Once I removed it the app installs just fine? Really weird?
Adam -
Reg an error related to default organization dn
Hi,
We created a Test DC in our environment., dc=test,dc=alpha,dc=com , but the actual default organization dn was dc=alpha,dc=com.
And recently we deleted the Test DC, dc=test,dc=alpha,dc=com, from which we started getting errors related to provisioning profile,
When i tried checking the synchronization status , it is throwing error , cause it is taking the wrong organization dn value,
oidprovtool operation=STATUS \
> ldap_host=oidtest.bpweb.bp.com ldap_port=3060 \
> ldap_user="cn=orcladmin" \
> application_dn="orclApplicationCommonName=sid6853,cn=EBusiness,cn=Products,cn=OracleContext,dc=alpha,dc=com"
Please enter the LDAP password:
Please enter the Interface connection information (Press Enter key for empty value):
oracle.ldap.util.UtilException: NamingException encountered when resolving subscriber - DEFAULT = dc=test,dc=alpha,dc=com
at oracle.ldap.util.Subscriber.resolve(Subscriber.java:591)
at ora cle.ldap.util.Subscriber.<init>(Subscriber.java:372)
at oracle.ldap.util.Subscriber.<init>(Subscriber.java:321)
at oracle.ldap.util.RootOracleContext.getSubscriber(RootOracleContext.java:378)
at oracle.ldap.util.provisioning.ProvisioningCmdArgs.computeDefaultValues(ProvisioningCmdArgs.java:243)
at oracle.ldap.util.provisioning.ProvisioningProfile.ProfileHandler(ProvisioningProfile.java:632)
at oracle.ldap.util.provisioning.ProvisioningProfile.main(ProvisioningProfile.java:1019)
Unable to resolve Organization : oracle.ldap.util.UtilException: NamingException encountered when resolving subscriber - DEFAULT = dc=test,dc=alpha,dc=com
But if i explicitly specify the organization dn, then it works correctly,
oidprovtool operation=STATUS \
> ldap_host=oidtest.bpweb.bp.com ldap_port=3060 \
> application_dn="orclApplicationCommonName=sid6854,cn=EBusiness,cn=Products,cn=OracleContext,dc=alpha,dc=com" \
> organization_dn="dc=alpha,dc=com" \
Please enter the LDAP password:
Please enter the Interface connection information (Press Enter key for empty value):
Inbound profile status details:
orclODIPProfileLastAppliedAppEventID: -4
orclODIPProfileProcessingStatus: Event Propagation Successful
orclODIPProfileLastProcessingTime: 20140115164253
orclODIPProfileLastSuccessfulProcessingTime: 20140115164253
Outbound profile status details:
orclLastAppliedChangeNumber: 4799005
orclSubscriberDisable: 0
orclODIPProfileProcessingStatus: Event Propagation Successful
orclODIPProfileLastProcessingTime: 20140115164304
orclODIPProfileLastSuccessfulProcessingTime: 20140115164304
So it seems the DEFAULT organization dn value is still stored in some locaiton from where oidprovtool using the wrong value ?
Could you please let me know how to point out to the correct organization dn ?
Regards,
KarthigaThanks J,,, Your suggestion helped to find another way.
its resolved now..
1. Searched for the entry:
ldapsearch -h oidtest.bpweb.bp.com -p 3060 -b "cn=common,cn=products,cn=oraclecontext" -s base "cn=*" orcldefaultsubscriber
version: 1
dn: cn=Common,cn=Products,cn=OracleContext
orcldefaultsubscriber: dc=test,dc=alpha,dc=com
2. Created test.ldif file with the below entry:
dn: cn=common,cn=products,cn=oraclecontext
changetype: modify
replace: orcldefaultsubscriber
orcldefaultsubscriber: dc=alpha,dc=com
Executed modify command:
ldapmodify -h oidtest.bpweb.bp.com -p 3060 -D "cn=orcladmin" -w XXXXXXXXXXXXX -f test.ldif
3. Again searched for the value and it shows the right one now.
ldapsearch -h oidtest.bpweb.bp.com -p 3060 -b "cn=common,cn=products,cn=oraclecontext" -s base "cn=*" orcldefaultsubscriber
version: 1
dn: cn=Common,cn=Products,cn=OracleContext
orcldefaultsubscriber: dc=alpha,dc=com
4. And checked provisioning and it is working fine now
oidprovtool operation=STATUS \
> ldap_host=oidtest.bpweb.bp.com ldap_port=3060 \
> ldap_user="cn=orcladmin" \
> application_dn="orclApplicationCommonName=sid6853,cn=EBusiness,cn=Products,cn=OracleContext,dc=bp,dc=com"
Please enter the LDAP password:
Please enter the Interface connection information (Press Enter key for empty value):
Inbound profile status details:
orclODIPProfileLastAppliedAppEventID: -2
orclODIPProfileProcessingStatus: Event Propagation Successful
orclODIPProfileLastProcessingTime: 20140116120049
orclODIPProfileLastSuccessfulProcessingTime: 20140116120049
Outbound profile status details:
orclLastAppliedChangeNumber: 4808806
orclSubscriberDisable: 0
orclODIPProfileProcessingStatus: Event Propagation Successful
orclODIPProfileLastProcessingTime: 20140116120046
orclODIPProfileLastSuccessfulProcessingTime: 20140116120046
Regards,
Karthiga -
Excise duty: error 9914 No material data maintained for company code
Dear all,
when executing transaction /BEV2/EDDS I get error 9914 No material data maintained for company code in some material documents.
However, I see material is correct.
Can you tell me which views of material master am I missing?
What do I need to check?
Thanks in advance,
FSettings in material master "Basic view 1"
-
Load Material Code Error!
Hi guys i have a problem y have a BI system that load data from R3 when i load material codes with only numbers it works fine...but when i load a single number with a letter it give an error...
I donth remember where i can configure that BI accept letters on material code.
I hope somebody could help me
RegardsHi,
It allows characterstic also
sap deliver material 18 char
so it should accpet may be small letters of that material number
if when conevrsion is not happening OMSL tcode
maiantain the mataerila length as 18 and execute thaat
matnr_exit_input conversion and check the same.
check it once again it allows the char also.
Thansk & regasrds
sathish -
Error while posting material using transaction code MB1C
Hi Experts,
While I am trying to post material into warehouse its giving warning message initially as : MAT IS A MISS PART MRP CONTROLLER KNUITZ WILL BE NOTIFIED
MESSAGE NO: M7133
Diagnosis
Material is a missing part of plant
when I am pressing enter Its giving an error message as : MATERIAL DOES NOT EXIST IN WAREHOUSE
MESSAGE NO: L9023
All the materials that you use within a warehouse no must also be defined for this warehouse no.
Can Any one please explain me how to resolve this error in detail.
Thankyou
SAHERDear Siraj,
I have extended the material to warehouse numbers as you suggested. Then I got error as: WM MOVEMENT TYPE 561 IS NOT ALLOWED FOR WAREHOUSE NUMBER.
then I defined moment type in Logistic Execution -->shipping ---> picking --> Lean WM ---> Define moment types
Now its giving new error after defining the moment type for store location as: STORAGE BIN DOES NOT EXIST
MESSAGE: L9009
Thank you,
SAHER. -
Hi Experts,
I have a Z-table for a gatepass report which was already created by another developer. This table has many fields including plant, year, material code field. (MATNR) etc
Now the problem is in SE11, I run the table to display the entries, when I enter plant and year and execute many entries are displayed.properly including material codes(e.g.50008536).
But when I execute the same entering plant, year and material code(e.g.50008536) then this message is displayed. " No table entries found for specified key"
The same thing happens if I am writing a select query in my report to get the data of any particular material code. My internal table is not filled with the data including that particular material code.
Some more info :
1. The material code field in the Z-table is assigned the standard material code Data element. i.e. MATNR
2. Even if I enter '000000000050008536' as input it is still not working. it is automatically changed to '50008536' after executing.
So please help me where the problem is? I have spent alot of time on this but not able to find the problem..
Thanks,
Vishal .Hi Vishal,
Hope I understand that table content does not starts with zero for material, reply me if i am wrong.
Use this code before where condition.
loop at so_matnr.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
INPUT = so_matnr-low
IMPORTING
OUTPUT = so_matnr-low.
if so_matnr-high is NOT INITIAL.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
INPUT = so_matnr-high
IMPORTING
OUTPUT = so_matnr-high.
endif.
MODIFY so_matnr.
endloop.
if table content is filled with zero use FM conversion_exit_alpha_input
Regards,
Venkat. -
Dear Experts,
I have a requirement for making material description as non mandetory in change request view of mdg material screen.
I have done that using field usage in get data method of feeder classes, but still message is displaying.
This message 'Material description is mandatory is displaying with check action only, but not with save or submit after i anhance field property as not mandetory.
How to prevent error message for material description in MDG material detail screen, when user click on check action.
Thanks
SukumarHello Sukumar
In IMG activity "Configure Properties of Change Request Step", you can completely deactivate the reuse area checks (but will then loose all other checks of the backend business logic as well).
You can also set the error severity of the checks from Error to Warning (per CR type, not per check).
Or you provide a default value for the material description, e.g. by implementing the BAdI USMD_RULE_SERVICE.
Regards, Ingo Bruß -
How can i fix a 4280 error code when trying to burn cd's on itunes
How can I fix a 4280 error code when trying to burn cd's on itunes for windows? Model drive is drive D: TSSTcorpCDRWDVD TS-H492C
Did you by chance find out a solution with your problem? I am having the same issue with the same drive. I even uninstalled iTunes and completely reinstalled it.
Thank you for any help anyone can offer. I'm not having any luck finding answers on the net. Thx.
Maybe you are looking for
-
Thanks bschauwe, but more questions on your post...
You said in a helpful reply to my post: public class TestDataObject { public void setX(int val) { this.x = val; public int getX() { return this.x; }Your native methods take one of these objects as a parameter, or return one of these objects. public c
-
Adobe PDF Printer not working in Illustrator since 9.3.2 update.
Greetings all, Since updating Acrobat Pro to 9.3.2 I've not been able to print to PDF from Illustrator using the Adobe PDF Printer (Adobe PDF 9.0 in my printer list). I've tried several restarts and have also removed the printer and run the Repair Ac
-
No provisioning logs available
Hi, I am on GRC 10.0 SP14, and configuring GRC with CUA setup. However, have run into an issue We have the CUA on Solution Manager, so all the ARM requests are going through CUA, if the user has access to Solman, I mean if the user has a role assigne
-
If possible add to context menu "Clear folder". When in folders have many many letters and i have many many folders, then very simple to delete all letters in folder in "one click". This for Thunderbird.
-
hi , i am working with OWB and have made an warehouse with OWB . can I use excel 2007 as BI tools and connect OWB to it and make report ? cheers Padideh