Re-executing Activities in a Scope Activity with the Replay Activity
Hello All,
Our destination DB can go down and may take 2 -3 hrs to come back. We would want to catch a fault and then would want to replay the Invoke activity every 15 = 30 minutes hoping the DB has come UP and so records would get inserted. Understand that SOA works as a instance so this REPLAY would keep trying in that instance and next instances would automatically get queued and execute serially when that DB comes UP. Is this correct ?
Meaning when DB comes up then ......... instance 345678 gets inserted, followed by replay of instance 345679 gets inserted , followed by instance 3455680 gets inserted automatically without human intervention. is this correct?
and what is cost on performance / memory resources standpoint on using such REPLAY ? is it a memory Hogger activity ? OR there is no performance impact.
thxx
brazil
Is there a dependency that these instances get processed as soon as the DB comes back up? If an invoke happens on a down DB I would fault the instance using fault policies and do manual intervention when you know the DB is back up. Unless there is a good reason I wouldn't use a replay activity, but I would need to know more about the use case.
Regards.
Edited by: bbukacek on Mar 11, 2013 11:22 PM
Similar Messages
-
Problem with the product activation adobe acrobat 9 standard.
I have a problem with the product activation adobe acrobat 9 standard.
It is a failed hard disk to the pc and was not able to deactivate the license adobe.
Now I replaced the hard drive and reinstalled the software but it tells me that all licenses are used.
Is it possible to unlock the licenses in use?
Thank you.Adobe can unlock licenses, this is a normal thing for them to do. You must contact them directly, there is no trick or other way.
-
I am trying to install premier elements 11 that I purchased back in 2012 on a new machine with 8.1. I get "invalid serial number" when I enter the serial number I received with the original activation e-mail when I purchased the product, thanks!
Error "The serial number is not valid for this product" | Creative Suite
-
I use 2 to 3 computers for my photo retouching, can I get them activated with the same serial number? for Photoshop Elements 13, and premier elements 13
You can activate any two of them at a time, but if you want to use it on a third computer you will need to deactivate one of them before you can do so. To do that, go to Help>Sign Out.
-
i need help to activate my iphone 5s. am stuck on the activation page. can someone help with with the icloud activation bypass? how do i even go about it?
You must put in the required information. If you do not have it, you must get it from the original owner of the phone. If you have forgotten your iCloud password, you can reset it at:
https://iforgot.apple.com/password/verify/appleid
There is no such thing as an activation "bypass". Activation Lock is a security feature. It wouldn't be that secure is you could bypass it, wouldn't it? -
Create Activity with Campaign and Activity Result
Hi everybody!
I'm developing a report and I would like to create an activity in CRM passing values to field Campaign and Result (Activity Result).
Thanks in advance for your tips and suggestions..You can do this with the CRM_ORDER_MAINTAIN FM. Sorry, but I do not know by heart where the two fields are stored, but if you like to know use CRM_ORDER_READ to access a known activity and check where your data is stored.
Hope this helps,
Kai -
What to do with the message: Activating embedded security chip
Hello,
I've been using a dc7800 for a couple of months without problems, running Windows 7. As the machine had only 1GB RAM, i added two modules of 1GB each last week. Apparently one of the modules is faulty, as the pc would not boot with both modules inserted.
I swapped the modules a couple of times to find out which one was giving the culprit - i removed power from the pc, changed the modules and powered it on again to see if it would boot ok now.
Now, after a few times the message "Activating embedded security chip" appeared on screen every time i powered on the pc. The message stayed for a couple of seconds, then the pc restarted and the message reappeared and so on.
Pressing F10 during boot resulted in a "301 Keyboard error message" together with the "Activating embedded security chip" message, again with a restart after a few seconds.
In an attempt to solve the problem i reset the cmos by pressing the internal switch for 5 seconds. Since then, after powering up the pc i only see "F1 Accept" and "F2 Cancel" on the screen, but keyboard input is not recognized.
Again, the pc restarts after a few seconds.
I upgraded the Bios to v1.32 some time ago, but i have never touched the TPM settings in the bios.
Any suggestion to solve this annoying problem is much appreciated!
Kind regards,
RuudHello ruudk,
In order for us to accurately help you resolve your issue, I will provide you the link to our commercial forum. Because this PC is a commercial unit they would be able to assist you better, you have actually posted to our consumer forum. When you click on the link it will place you right where you need to be. It is possible that you may have create another profile as well.
Commercial Forum
Thank You
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem! -
Phones with the same Active Standby Calendar as 66...
Hello,
I currently have a 6650 Fold Nokia Handy. I like it because the Active Standby Calendar does show you all appointments in the near future. For example:
01.04 Date with Caroll
03.04 Date with Jecky
05.04 Birtday Paul
07.04 Doctor
Im very happy with it and I dont want to miss that feature.
But now Im looking for a new phone and Im shocked that most new Nokia phones do only show 1 or 2 Calendar entrys on the Active Standby Screen!
Even the E Series, wich is supposed to be Buisness Phones, do only show up more then one appointmens when they are on the same day!
Can anyone tell me what Nokia Sliders have the same Active Standby Calendar as the Nokia 6650 Fold?
Many thankschanchan05 wrote:
One the newer touch phones though, on shortcuts bar homescreen you can see up to 10 events listed.
Only if all of them are on the same or next day. It won't display them any further ahead than that. So if you have one entry saved for today, one for tomorrow and one for the day after that it will only show two entries.
What could be an option to consider is an N97 or N97mini with the coming next calendar widgets installed. This allows many entries to be shown from days to months ahead.
For example: -
Problems in creation of activity with the folder relationship...
Hi People,
I need to create the activity adding the campaign in the RELATIONSHIP folder.
To create the activity, I am using the BAPI BAPI_ACTIVITYCRM_CREATEMULTI, but there is the problem: I can´t add the campaign at the folder RELATIONSHIP of transaction CRMD_BUS2000126. Is it possible to create this?
If not, Is there the other function that do this?
Thanks,
Regards.Hi Florin,
At First, thank you for your help.
Really, I don´t populate the table DOCUMENT_FLOW.
Sorry, do you have an example to populate this table correctly? Or do you have any documentation about this BAPI?
Thanks.
Best Regards.
Norberto Muramoto. -
Troubles with the Notification Activity
Hi,
I have deployed process on my server. Whenever I instantiate it, it says:
"Cannot find the specified instance
If the instance has recently....." (Refresh doesn't help even after 10 minutes)
This problem disappear when I remove the notification activity from my process (I use email notification).
Any ideas?
Thanks,
TavorI'm pretty sure the notification service is a synchronous process so when you invoke it your bpel process will not dehydrate and therefore will not show up in the console.
I haven't tried this, but I'm pretty sure what's happening is that you're getting an exception somewhere in your process related to the notification activity and the thread is crashing without being saved to the dehydration store. Or it could be that the call to the notification service is hanging. One way to verify this is to put a "checkpoint" into your process prior to the notification activity. You should also turn on debug logging and check the log to see if there are errors occurring there.
To create the checkpoint add a java exec activity to your process and enter enter the line
checkpoint(); -
How to merge an openActivity with the conflicting activity
Hi all,
I checked out the activity which is already checked out by another developer.He checkedIn that activity.Now if i tried to checkIn i am getting an error as Conflict in CheckIn .I had gone through some documents regarding Merging of Activites which are conflicted.
Can anyone give me step by setp procedure for merging 2 Conflicting activites
Regards
Padma NHi,
1. Open the “Integration Conflict” view to display where the version conflict occurred.
2. Select “Auto Merge…” from the context menu. The list of the source code with conflicts will be displayed.
3. Select the relevant source code and choose “Merge Conflict Manually” from the context menu. The two source code versions will be displayed and will indicate the conflict line.
4. Choose “Accept changes” after resolving the conflict by merging the code lines.
Also go through the help content on 'Resolving Conflict'
http://help.sap.com/saphelp_nw70/helpdata/en/44/42dfb4709914bce10000000a155369/frameset.htm
Regards
Srinivasan T -
What Is Up With The Upgrade & Activation Fee?
I noticed that AT&T is charging both an 'activation' & 'upgrade' fee for iPhone 3GS users:
!http://67.151.114.194/pictures/20090612b.jpg!
Last year I remember AT&T charging me $38 activation fee. I read that the activation fee was cut in half, but they add an 'upgrade' fee which new users don't have. So in other words, AT&T sticks the $36 to you no matter what.
I wonder if AT&T gives a discount for not delivering MMS/high-speed 7.2 HSPA/tethering available?
-GlennNot sure why AT&T would charge me 'Activation' when I am already with AT&T.
-Glenn -
Tab View in Safari 6 on Mountain Lion is not activating with the Pinch Gesture.
The pinch gesture that activates Tab View in Safari 6 is not working. I have the latest MacBook Pro 17" with an updated Mountain Lion OS.
Everything else in Safari works fine, even the keyboard shortcut for Tab View works. Whether I pinch on my laptop trackpad or the standalone trackpad the pinch gesture doesn't activate the new Tab View feature.
Anyone else have this issue?Sorry but what is the keyboard shortcut to activate tab view? KineticBranding, you said, "Everything else in Safari works fine, even the keyboard shortcut for Tab View works. " I've been looking everywhere for a keyboard alternative to the pinch out gesture that activates tab view. I am aware of cmd+shft+arrow to got left or right a tab, but is there a shortcut to activate tab view?
Thank you. -
Prevent user defined query from being activated with the CopyTo function
Hi, I have a user defined query defined in one of the quantity field (in the grid) in the goods receipt PO window.
The query updates the quantity depending on the number of another line field. The query works great, but I dont want it to be activated when a user clicks the "Copy From" purchase order. When this happens the query gets activated and changes the quantity.
The query is defined to be activated "when exiting altered column", i have not selected the "Refresh Regulary"
Please help!Thank you so much for replying,
this is my query, depending on the column U_Empaque (type of package), I look for the right conversion in the OITM table of the item. Then I use the number from the column U_Cantidad_Empaque (Quantity Of the Type of package) to multiply by the conversion factor that I have defined for the Item in the OITM user fields. The conversion is a standard conversion, so It needs to be modified by the user to set it to the real quantity of the unit of measure (or unit of inventory). The query works great, except for the CopyTo and CopyFrom functions.
Iam using 2007 A patch 45.
México's settings.
SELECT
CASE
WHEN (SELECT 'TRUE' FROM OITM T0 WHERE T0.ITEMCODE = $[$38.1.0] AND T0.U_EMPAQUE1 = $[$38.U_Empaque.0]) = 'True' THEN (SELECT ($[$38.U_Cantidad_Empaque.0]) * T1.U_CONVERSION1 AS 'Respuesta' FROM OITM T1 WHERE T1.ITEMCODE = $[$38.1.0] AND T1.U_EMPAQUE1 = $[$38.U_Empaque.0])
WHEN (SELECT 'TRUE' FROM OITM T0 WHERE T0.ITEMCODE = $[$38.1.0] AND T0.U_EMPAQUE2 = $[$38.U_Empaque.0]) = 'True' THEN (SELECT ($[$38.U_Cantidad_Empaque.0]) * T1.U_CONVERSION2 AS 'Respuesta' FROM OITM T1 WHERE T1.ITEMCODE = $[$38.1.0] AND T1.U_EMPAQUE2 = $[$38.U_Empaque.0])
WHEN (SELECT 'TRUE' FROM OITM T0 WHERE T0.ITEMCODE = $[$38.1.0] AND T0.U_EMPAQUE3 = $[$38.U_Empaque.0]) = 'True' THEN (SELECT ($[$38.U_Cantidad_Empaque.0]) * T1.U_CONVERSION3 AS 'Respuesta' FROM OITM T1 WHERE T1.ITEMCODE = $[$38.1.0] AND T1.U_EMPAQUE3 = $[$38.U_Empaque.0])
WHEN (SELECT 'TRUE' FROM OITM T0 WHERE T0.ITEMCODE = $[$38.1.0] AND T0.U_EMPAQUE4 = $[$38.U_Empaque.0]) = 'True' THEN (SELECT ($[$38.U_Cantidad_Empaque.0]) * T1.U_CONVERSION4 AS 'Respuesta' FROM OITM T1 WHERE T1.ITEMCODE = $[$38.1.0] AND T1.U_EMPAQUE4 = $[$38.U_Empaque.0])
END -
I want to continue to use my CS4 created projects while upgrading the Creative Cloud. I have an Imac, Ipad, Iphone 6 and Macbook Pro. Am I going to lose or not be able to bring those .ai files from CS4 into the new software?@
Please refer to:
Can You Save/Open CS6 Files on CS5, CS4 or CS3 – and Vice Versa? | ProDesignTools
Can You Open/Use/Export/Save Adobe CC Files on CS6 – and Back? | ProDesignTools
It has important information.
Regards
Rajshree
Maybe you are looking for
-
Windows 7 126 error after itunes install, why?
ITunes runs well, however I get a windows 7 126 error. I don't know how to repair it. I've unintalled all the Apple files and reinstalled several times to no avail. please help and thanks in advance!
-
Cannot install Yosemite to my 2012 Macbook Pro
I currently have OS X 10.9.5. Every time I try and install Yosemite the install fails and provides me with an error log. I have re-downloaded Yosemite and tried again, I also make sure my power supply is plugged in when downloading/installing. Very f
-
I was able to fix this issue on the last update of FF in the console of FF. Now I am unable to find the command that allows the browser to automatically find the address I am looking for. I know it is not "Autofill". What happens is, I type just "moz
-
Using an hierarchical dataProvider for a TileList
Hey guys, I am working on a Flex3 project and do have a viewStack holding two components: an AdvancedDataGrid and a TileList Both of these are supposed to be based on the same dataprovider and due to the nature of the viewstack easily switchable. The
-
My iPad just randomly stopped having sound and will not shut down only restart.
my iPad just stopped have sound. Only works with ear-buds. Also, now when I power it down or even force it, will only restart & will not stay shut off. I have done the whole mute/lock thing, did a reset & even backed it up & restored it. Anybody