Re: Fast Forward Button

Hello Everyone.
I want to create a Fast Forward Button. Technically, I want to be able to use different speed using my  TV Remote Control to control the Video
How can I do that?
Thank you very much

I don't believe this exists in the DVD spec, right? The only way I see to fast forward (other than jumping to chapters) is to use the DVD player remote.

Similar Messages

  • IPOD PLAY BUTTON WORKS LIKE FAST FORWARD BUTTON

    I need help. My 5th generation IPOD will not play any of my songs. When I press the play button it lists them one at a time (as if I had hit fast forward) but does not play any of them. I have tried recharging but it does not work. I have tried looking in discussion groups but no one has this problem.

    The first things to try are these basic troubleshooting steps.
    The Five Rs.

  • FLVPlayback Rewind & Fast Forward Buttons

    Hello gang! You know the Forward and Back buttons in
    the FLVPlayback component? Well, I really need to develop Fast
    Forward and Rewind buttons that do not jump you to either the
    beginning or end of each video. I would like to buttons to function
    as true Fast Forward and Rewind buttons. I've seen components that
    you can purchase, but I really don't want to go that route.
    Any help would be greatly appreciated. And as always, I thank
    you for your time and attention.
    Kind regards,
    Greg

    i have been having the same problem too since 2-3 days and i am really worried... pls revert back asap. i bought my bbcurve 9300 in march 2011. n i dnt wanna lose it for sm othr new fon.. plz revert back..its really urgnt

  • How can I fast forward in Podcast?

    I want to know how to fast forward in a podcast?  I can hold down the fast forward button and it goes a few seconds and I can rewind for a few seconds.  However I want to fast forward minutes.
    Any suggestions?  I see in the manual on page 62 about podcast and audiobook controlls but I don't have playback speed or a skip to any point in the timeline.

    To skip to any point on the timeline, drag the playhead along the scrubber bar.  While dragging, slide your finger down to slowdown the scrub rate.

  • MediaPlayBack component, forward button grayed out

    I am using the mediaplayback component and it plays the FLV
    fine when I test it. It allows me to pause and play and rewind to
    the first frame, but the fast forward button to go to the end of
    the flv is grayed out. I don't know why? Also I am loading a swf to
    play as a preloader when the flv is done loading. What functions do
    I use to code this. thanks!

    FYI.. This was a UME Role issue.
    Assign the user all of the BPM roles and at least one gives them access..

  • No chapter fast forward for video playback in os7

    Anyone else notice that you can't hit the fast forward button and jump to the next chapter in an iTunes video? I can go back to the menu and skip from there, but not while watching the video. Not a big glitch, but annoying. Why do the all the updates always have this bug? You'd think they would have tested them before hand.

    It has always seemed that Bridge has been the stepchild of Adobe since its inception and that Adobe spends precious little effort and resources on it.
    Remember that Bridge was born as nothing more than Photoshop's Browser.  Nothing more.
    Then, in a straight marketing stunt, Adobe decided artificially to lump together a number of totally unrelated applications into artificial "suites."  These are in fact totally non-related applications that were artificially bundled by fiat of bean counters and marketers.  The engineering teams for the individual point applications are totally independent from each other and are not only not in in the same building but in different cities, different states and, some, in different countries.  They have pathetically little communication among themselves.
    The humble Photoshop Browser was renamed Bridge and jerry-rigged to serve as some sort of go-between vehicle among the applications also jerry-ringed into artificial suites.  (Definition of JERRY-RIGGED: organized or constructed in a crude or improvised manner <a jerry–rigged plan>.
    Don't expect too much from Bridge, and don't complain about it too loudly, or you might find yourself among others who have been told, in effect, that "Adobe doesn't charge you for Bridge."  As a "free" byproduct, you get what you paid for. 
    In this context, just look at what has happened to the value of Adobe stock in the last five years: –28.20% (minus).
    Compare that to Apple during the exact same period: +358.43%.
    Wo Tai Lao Le
    我太老了

  • Problem with fast forward of trackball in media player of 8330

    I'm a fairly new BB owner of a Sprint 8330 Curve.  I've checked the newbies site on Crackberry and checked here also.  Can anyone help with this problem:
    I've downloaded some MP3 audiobooks from my local public library.  They play fine, but the problem is that it always starts at the beginning every time.  The book is in multiple parts, each of which is 60 minutes long, each of which is treated as a single song.  I can see the reverse, pause, and fast forward buttons but I can't get the trackball to work with them.
    When I scroll the trackball to the right to fast forward, it scrolls to the next part of the book, not within the same part (song).  When I scroll the trackball left, it goes back to the last song.  When I scroll it up or down, the whole playlist shows up on the screen and I can scroll through those.
    I found one post that talked about how to fast forward video, but it showed a different screen that mine.
    I just can't get the trackball to position itself on the progress bar or on the controls.
    Any help would be greatly appreciated!
    Thanks.

    I've got the same problem with my BlackBerry 8330.  I have v4.5.0.169 (Platform 3.4.0.51). Once i start an audio file, I am unable to select the scroll bar above the play so that I can fast forward through the song, book, etc.

  • Itunes plays music as if I was holding down fast forward

    I just downloaded the newest version of itunes and when you begin listening to music it starts off okay but about half way through a song it starts playing it as if I was holding down the fast forward button...anyone else experiencing this problem?

    hmmmm. given that you've got a Dell, we'd better check on the possibility from the following document:
    iTunes for Windows: Songs Play Faster Than Normal on Some Dell Computers
    here's a link through to the (XP) Dell downloads page for your 8250:
    Dimension 8250 (XP)

  • Scrubbing/fast forward not working

    i have an mp3 file that is 18 hours long. It's an audio book.
    when i try to use the scrubbing or hold down fast forward it wont go to any other parts of the track. it doesn't matter where i put the slider, even if i drag it all the way to the end it still plays near the beginning of the track. when i hold down the fast forward button it just sounds like a skipping CD, looping over the same part of the track over and over!
    I tried restoring the iphone. still wont fast forward.
    could this be a bug in the ipod software?

    I did some research and found a great little app called "MP3 Scan+Repair".
    I used it to repair the MP3 audio book file and all is well now

  • Fast Forward and Rewind keyboard shortcuts in Log and Capture

    In FCP, I want to assign the Fast Forward and Rewind buttons (in the Log and Capture mode) to buttons on the keyboard. I've assigned the functions using the Keyboard Layout in the Tools menu but it doesn't seem to be working like it should. In Log and Capture when I use the mouse to press the Fast Forward button, FCP stops the miniDV deck and fast forwards the tape as fast as possible without showing any picture. However, when I invoke the keyboard shortcut I created all I get is the picture moving a few fames per second instead of the tape stopping and fast forwarding as fast as possible. The same happens with the Rewind keyboard shortcut as well. Any ideas as to why, and how I might be able to fix this?
    The computer I'm currently working on is a Dual 2 GHz PowerMac G5, 2.5 GB RAM, Final Cut Studio (Final Cut Pro 5.0.4).
    –Michael
    Message was edited by: Michael Starks

    When I press the fast forward or rewind button while logging a miniDV tape the video stops and then the tape fast forwards or rewinds at a MUCH faster rate than L or J ever give me. That is the behavior I am trying to get from a keyboard shortcut.
    Not possible via keyboard shortcuts, unfortunately.
    Even if you map the Rewind and Fast Forward functions to keys in a Custom Keyboard Layout - for those who didn't know, yes, there are specific commands for those functions even though they are not mapped by default - those shortcuts will not within the L&C window. We're stuck pressing the buttons.
    Forgot to mention: the only time you're able to invoke the true fast forward or rewind function is using Shift-I/O (that is, Go to In Point or Out Point). Of course that only works if you have the necessary In/Out point set...

  • Front Row playing shared TV video and using Fast-Forward question

    I'm playing a shared TV video on my Black MacBook from my iTunes running on my PowerMac G5 across my home ethernet 10/100/1000 network. The TV video plays just fine and I can pause it using the Remote just fine. However, according to the documentation for the Remote while using Front Row in this manner, the Remote's Fast-forward is supposed to fast-forward the video if it's pressed and held down. It does not do this! It simply shows the progress bar for the video with played time on left and remaining time on right. I held the button down for at least 30 secs but to no avail. I let up on the button and press and held down for another 30 secs or so but it still would not fast-forward as the documention says it should.
    My MacBook is updated with all the latest Apple software downloads for MacBook.
    Have others experienced this problem, and if so is there a soln to this at this time or does one simply wait for Apple to fix it.
    I will be sending feedback to Apple on this issue.
    Thanks for any insights in advance.

    Update...
    I left Front Row paused on a shared TV Video all night. In morning time screen was black and I could not resume playback.
    I backed out all the way to Desktop and restarted Front Row and selected same shared TV Video - and this time the fast-forward button worked as documented. Go figure this one
    However, when I tried several Shared TV Videos I only got audio in some cases and when I did get a video feed it was not moving yet audio kept rolling along. I had to back off to the Desktop several times and restart Front Row to get things working correctly. If you enecounter this just do what I did here and you'll get things going - just don't give up on it, is my advice. :-))
    This raised another issue - It appears that pause/play Remote button will not work (at least for me) after extended pause time (like for 8 hrs).
    Apple has some fine tuning to do on this Front Row feature - although I will add they've done a pretty darn good job with its initial release IMO.

  • Prob with fast forward

    I only use the mini to listen to audiobooks. Sometimes it loses its place and when I try to fast forward or rewind it either goes all the way back to beginning or 1-2 hours ahead. I've noticed a "bar" that is segmented that appears below the name, title of book, etc and it I have a 5 hr book, then there are 5 bars and when I push ff, it goes ahead by an hour. How did I get this bar on there, or better yet, how do I get it off so that I can at least ff in increments of minutes. Nothing in manual about this that I've seen. Thanks so much for helping me.

    The segments should represent chapters. Pressing fast forward once quickly releasing it should cause it to jump to the next segment.
    To fast forward without "jumping" press and hold the fast forward button. You should hear it as it skips ahead.
    Alternatively, you can press the select button (center button) and you should see a diamond appear over a bar. You can then scroll ahead or back and the diamond will indicate the play position. Press the select button again to return to the previous display.
    Regards.

  • Fast forward podcasts

    On my iPhone I have a 15 second fast forward "button" in podcasts. I do not see that same button on either of my iPads. Is there a way to get the 15 second fast forward "button" on iPads?
    Mike

    Press the center button and scroll to where you want.

  • No audio when use Fast forward ?

    Hello,
    We have created a swf from power point slides and added som audios in it. They are working fine in normal play. But when clicked on 'Fast Forward', no audio after that.
    Have to rewind the file again.
    So please let me know how can we resolve that.
    Thanks,
    Laxmilal

    Are your audio clips all added slide by slide or did you add audio across multiple slides?  I don't personally add the fast forward button to the playback bar because it causes too many issues confusing end-users.  But I have heard that ensuring each slide has its own discreet audio clip reduces the problem you speak of.

  • Frame fast forwarding when watching recorded BT Sp...

    Hi  - new to YouView and to BT Sport.
    When I watch any recorded programme from freeview channels, the fast forward button allows me (a) to forward through all the frames and (b) to pick the speed at which I forward.
    When watching a recorded BT Sport programme, the fast forward button (a) jumps me forward about a minute a time rather than seeing all the frames and (b) will only let me forward a minute at time, which is very tedious when I want to whizz through a 5 hr programme.
    Do you know why this is?
    Thanks, any help much appreciated.
    Solved!
    Go to Solution.

    Hi vicmuggeridge,
    I've had a word with my colleague about this and they've said that the current behaviour on internet channels on YouView is to skip forward (1 minute at a time) and skip back (15 seconds).
    All the best,
    Robbie
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Maybe you are looking for

  • Installing apps using itunes....

    I am unable to install apps on my iphone using itunes... My iphone ios and itunes both are up-to-date. When I sync my iphone with itunes then the sync stops after showing : 'Determining apps to sync'.... Please Help Me....

  • NEW UPDATE STILL MESSED UP!!!

    My phone is already acting up since the update last night. LED light doesn't flash anymore when I have notifications, "silence all" mode missing again from the main power button, now there's only Airplane made, power off and restart. Who knows what t

  • How can I use a where in Select clause?

    How can I use a where in select clasue when the other part of the where I do not not. I mean that Select * from mara where MATNR = MT* That means it can have MTA, MTB, MTC....and so on I can I write this code. Regards, Subhasish

  • Iphoto 8 after update won't import RAW files

    I'm running iphoto 8 version 7.1.3 and just updated the software from Apple's auto update (Jun 30th is when the update installed). Now I can't import RAW files from my canon 30D, from a memory card or from existing files. Every time I try iphoto free

  • Reg:updation of likp-btgew field in vl02n transaction

    hi friends, in my requirement i have to populate the field likp-btgew in vl02n when the outbound delivery was created i have updated the field by  using user exits in program sapmv50a, now the field is getting updated but   my problem is  when i chan