Re: "Fireworks can not run.The resource files are missing ordamaged"

Hi,
I had the same problem on Win XP (Home) and Firework MX after
a
complete reinstall of my system.
There might be two triggers for the problem
1. I used my regular user account to install most of the
programs and
downgraded it afterwards to a limited user account! This
seems to be a
bad idea at all!!! Several programs (incl. Outlook, etc.)
failed to
start afterwards, because of corrupted user rights (i.e. no
read/write
access even for the owner of the files). Allways use an admin
account
for installing - don't change the rights of your regular
account for
that.
2. I restored my old macromedia configuration files (located
in "Lokale
Einstellungen\<user>\Anwendungsdaten\Macromedia\Fireworks
MX") by
copying them directly or using the windows "sicherung"
(ntbackup). I
found that the user and group information for that files were
empty!
Solution:
- I completely uninstalled the mx suite (probably fireworks
would be
enough) and in addition to that
- removed all directories not deleted by the installer and
- cleaned the registry manually from some "Fireworks"
entries. !!Be
careful with that!! Have a look at this reg-key first:
HKEY_LOCAL_MACHINE\SOFTWARE\Macromedia\Fireworks
You probably don't have to delete all the "Edit with
Fireworks" entries
and file associations.
I hope this might help a little.
By the way - I used the cygwin shell and the "ls", "chmod"
and "chusr"
commands to detect and change the user rights of files. This
was the
appropriate solution for the problems with all other
programs.

New Window: "Windows Installer: The feature you are trying to use is on a network resource that is unavailable. Click OK to try again or enter an alternate path to a folder containing the installation package iTunes.msi in the box below." (Tried all listed files - non work - same message comes up)
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Similar Messages

I have Macromedia Fireworks 3.0 and the install process doesn´t run! After the installation the message is: fireworks cannot run. the resource files are missing or damaged. I use Windows 8.1

I have Macromedia Fireworks 3.0 and the install process doesn´t run! After the installation the message is: fireworks cannot run. the resource files are missing or damaged. I use Windows 8.1. Antworten auf Deutsch wären super!

As far as I know there is no download resource for older Macromedia programs and it is highly unlikely that one as old as version 3 of Fireworks will be able to work on a Windows 8.1 system. I was unable to get a Studio 8 version installation on a Vista system, and likely even an XP system (cannot remember that far back).

I have a pdf file with the added sounds, so I can not run the sound in adobe reader XI on my tablet samsung galaxi pro (android)

I have a pdf file with the added sounds, so I can not run the sound in adobe reader XI on my tablet samsung galaxi pro (android)

Thanks for writing to us. Unfortunately, such advanced javascript support is currently not provided by Adobe Reader for Android.
Thanks,
Adobe Reader Team

Need Help! "Could not locate the resource file in the Configuration folder."

I had just purchased and installed Adobe Crerative Design Suite last night. Every program works except Dreamweaver, which gives me the error message:"Could not locate the resource file in the Configuration folder. This File is required to run Dreamweaver. Please reinstall the application". I am suspicious because the was a previous version of Dreamweaver on the computer before this installation, but I unistalled it. I do not understand why I get this message. Is there a file somewhere that is missing or at faut. How can I remedy this? Thanks
~Todd

Nadia,
Your posted resources worked for me. Thank you! After many attempts (to include Adobe's overseas call canter) to resolve the same installation and run errors, I used your suggested steps and I finally have a clean and running install. I did have to take a few extra steps;
First I downloaded both Cleaning scripts. For CS4 & CS3.
Next I downloaded Windows installer/cleaner. I have Windows Vista Home Premium and that is a required installed program to run Adobe's cleaning script.
Once I was sure I had all the programs/scripts I needed (per your instructions and the instructions found on the Cleaning scripts site) I disconnected my computer from the Internet.
Then I disabled all running programs especially all Anti-virus and firewall programs and any others that have calls of any kind: i.e. Boinc (Seti), Skype, email programs (Windows Live Mail), etc.
Next I uninstalled all CS4 products and even though I was told that Macromedia Studio MX 2004 can stay installed (read that on one site and the overseas Tech also reinforced that information) I uninstalled MX 2004.
I then rebooted and installed the Windows installer/cleaner program and ran the Adobe CS4 cleaner script twice.
After another reboot I installed Dreamweaver CS4 first, rebooted (can't reboot enough with Windows!) and, yes you guessed it, rebooted.
I then attempted to open Dreamweaver CS4 and for the first time it ran without the error!
I then installed Adobe Ps CS4 and rebooted and that work for the first time as well.
I can't say for sure if Macromedia Studio MX 2004 caused the install errors on the Adobe products but without it and ALL that uninstalling and rebooting and running cleaning scripts and installing and rebooting, Adobe finally felt my computer was clean enough to call it home and work.
Thank you again for your information and I suggest if anyone else finds their way here that they follow your instructions to the letter. Takes a long time but a proper and clean install will be the result.

"Could not locate the Resources file in the Configuration folder"

While opening DW cs5 on my iMac OS X 10.7.5 a window came up that says: "Could not locate the Resources file in the Configuration folder. This file is required to run Dreamweaver. Please reinstall the application."
After downloading and reinstalling Adobe Creative Suite CS5 yesterday per the instruction of Adobe tech support, the application still had the same message when I attempt to open it. Not sure where else to turn. Please advise. Thanks

See if this previous thread regarding the same issue will help:
http://forums.adobe.com/message/2274699#2274699
Nadia
Adobe Community Expert : Dreamweaver
Unique CSS Templates | Tutorials | SEO Articles
http://www.DreamweaverResources.com
Web Design & Development
http://www.perrelink.com.au
http://twitter.com/nadiap

Can not run the test form using servlet (patch 8)

Installed 9I AS 1.0.2.2.1 and forms patch 8 on Windows 2000.
Configured the Forms Listener Servlet by following the white paper "Forms 6i Patch 8: Oracle Forms Listener Servlet for Deployment of Forms on the Internet".
I can get the page titled Forms 6i Listener Servlet using URL: http://myserver/servlet/oracle.forms.servlet.ListenerServlet.
However, I can not run the test form using the servlet by the url:
http://myserver/servlet/f60servlet?config=servlet. In the formsweb.cfg file I also added a section
[servlet]
serverURL=/servlet/oracle.forms/servlet.ListenerServlet
No meaningful error message. At first it seems very slow, and then shows the "The page can not be displayed" page.
Please advise.
Thanks.

u must add "Script Alias ifcgi60 "$ORACLE_HOME/forms60/cgi" in confirguration.

HT1349 I can not run the scanner in my main user, but only the second user and the same thing with updating apps! Why is this happening???

I can not run the scanner in my main user, but only the second user and the same thing with updating apps! Why is this happening???

Welcome to the Apple Community.
Enter the details of her second account at system preferences> mail, contacts & calendars.

Just installed CC on my PC, Windows 7, 64 bit system. Not seeing any applications on the desktop or installation folder. However, all the resource files are present in the installation folder. What am I doing wrong?

Just installed CC on my PC, Windows 7, 64 bit system. Not seeing any applications on the desktop or installation folder. However, all the resource files are present in the installation folder. What am I doing wrong?
I've installed three times with no luck. I downloaded the Creative Cloud Packager off the licensing site: https://licensing.adobe.com. I unpacked and choose my applications. The install seemed to be successful, but I don't so any of the applications anywhere.

Hi,
Creating package doesn't mean it will install the product,
You will need to install the package now. Please follow the instructions mentioned in the below articles
Creative Cloud Help | Creating or editing packages
Creative Cloud Help | Deploying packages
Please let me know if it doesn't help.
Regards,
Devendra

Can not run the J2EE application on webless iAS

Hi:
I have installed iAS on Salaris, and installed a webconnector on IIS which
hosted on different machine.
Now I can run the simple servlet sample, but I can not run the Helloworld
application that I deployed follow the guide. The error message was: socket
receive error (RecvBuffer 1)

Don wrote:
Hi:
I have installed iAS on Salaris, and installed a webconnector on IIS which
hosted on different machine.Wow, I did not know that iAS support IIS as the web server. I think SP3
will
allow you to use Apache as well as iPlanet's web server, but I not think
IIS is
supported. Perhaps you should use a supported web server.
Kent

My Organizer can not open the catalog file it crash down.

My Organizer can not open the catalog file it crash down.

OS X Yosemite And PSE 13
2015-01-16 8:24 GMT+01:00 Anwesha Dev Chaudhary <[email protected]>:
My Organizer can not open the catalog file it crash down. created by Anwesha
Dev Chaudhary <https://forums.adobe.com/people/AnweshaDevChaudhary> in *Photoshop
Elements* - View the full discussion
<https://forums.adobe.com/message/7101754#7101754>

PP Procedure is Missing, Can not Run the Preprocessor

hi experts,
while executing some module program through TCODE. I got this error PP Procedure is Missing, Can not Run the Preprocessor
can any one help me ?
thanks,
nag.

Hello,
What I thought you meant when you said "Port" was that you were using a Distribution project to move it to other machines. Therefore you have two options to proceed.
1) Copy the nicppaiu.dll from the system folder on your machine to the system folder on another machine you are "Porting" to.
2) Add a project to your solution that is a Setup project. Then add the output of your application to this project and add the MSM discussed earlier. This will create a MSI that can be used to install your application on multiple machines (it still requires a NI-DAQmx install).
There is a good topic in our help named "Deploying Measurement Studio Applications" that tells you everything you need to know.
Regards,
Jeff

HT1719 my ipod shuffle wont sync, it says can not sync the required file can not be found??? please help.

my ipod shuffle wont sync, it says can not sync the required file can not be found??? please help.

if u can get your hands on a mac tis will work
http://www.youtube.com/watch?v=vfnXjV9p0pA&feature=related

I can not install any addons as firefox throws an error saying " firefox can not modify the needed file"

whenever I try to install an addon, firefox says it can not install the addon since it can not modify the needed file! Whatever addon I have are from my previous version of firefox.

Is the date / time set correctly on that PC? <br />
Right-click the Time in the System Tray and select Adjust Date / Time to see.

I can not run the account Administrator show me this letter Please help :

I can not run the account Administrator show me this letter Please help
http://im40.gulfup.com/4AXHK.png

Hi,
You need the administrator permission to enable the built-in administrator account.
For secure concern, there is no other way to do this.
Alex Zhao
TechNet Community Support

Http to RFC [http adapter issue] - The system can not locate the resource.

Hi,
When I post the message with http client, I am getting the below error.
Line 33: The system can not locate the resource specified.
i.e --> xhttp.send (payload);
It is a java script error.
Result URL:
http://xxx.xxx.xxx.xxx:8000/sap/xi/adapter_plain?namespace=http%3A//www.cisco.com/httptobapi&interface=MI_request_response_cisco&service=BS_HTTP_CISCO&party=&agency=&scheme=&QOS=BE&sap-user=xxxxX&sap-password=xxxx&sap-client=500&sap-language=EN
Any idea what went wrong?
Thanks
Balaji

hi,
I have given all the details correct.
Server Host,Port, Client, Sender Service, Interface and namespace and then payload.
It looks like problem is with http client. It is not posting the data correctly.
I tried on 2 different systems.
On one system it gave a problem at line 33 which i mentioned at the first post.
And second system gave line: 27 Permission denied.
Line 27 : xhttp.open ("POST", reqString, false);
Payload:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_request_sales_cisco xmlns:ns0="http://www.cisco.com/httptobapi">
<Customer_Number>1002</Customer_Number>
<Sales_Organization>1000</Sales_Organization>
</ns0:MT_request_sales_cisco>
Thanks
Balaji

Re: "Fireworks can not run.The resource files are missing ordamaged"

Similar Messages

Maybe you are looking for