RE: (forte-users) Distributing library - What could preventmy li b fro

Hi Jean..
I remotely remember seeing this kind of a problem before. I think you can
start by cleaning your environment. You can do this by:
1) Exporting your environment definition from econsole or using escript. The
.edf file goes into the forte_root\envdist directory
2) bringing down the environment.
3) removing the .btd and.btx files of the environment in
forte_root\sysdata\envrepos
4) start the environment using bootstrap i.e using the -e option.
Hope that solves it for you..
Ravi Kalidindi
Born Info Svcs Inc
-----Original Message-----
From: Jean-Paul Gabrielli [mailto:[email protected]]
Sent: Wednesday, September 01, 1999 9:04 AM
To: '00 Forte Mailinglist'
Subject: (forte-users) Distributing library - What could prevent my lib
from being made ?
(8) CMD: SetProjType 3
(9) CMD: Partition 3
USER ERROR: The project MYPROJ is already contained in version of
application and cannot be placed into another library application.
Class: qqsp_UsageException
Error #: [1602, 562]
Detected at: qqcf_LibraryConfig::SetProject at 1
Error Time: Wed Sep 1 15:30:25
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 4C0B7D30-6055-11D3-B8B3-2E3EAC99AA77:0x126:0x1, taskId
=
[4C0B7D30-6055-11D3-B8B3-2E3EAC99AA77:0x126:0x1.1]) in application
"fscript", pid 18036 on node mynode in environment myenv.
Thanks for any suggestion
j-paul
[Jean-Paul Gabrielli]
NOTE: If you got this twice, sorry but I got a strange mail saying i was not
a subscriber and reposted.
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: [email protected]

Hi,
I'm from germany so no 'best buy' but I think I will lock around sleeve/bag for a different product with same measures. Any tip?
The clear plastic case is not what I want. I would like to use the player without such protections. I just want a sleeve to protect the player while its in my jacket/pants.
Btw, i have bought this version: Creative Zen (maybe european version?). I also doesn't seem to have your mentioned sleeve. I also couldn't find it on the website.
Anyway, thank you,
Chris

Similar Messages

Distributing library - What could prevent my lib from beingmade ?

(8) CMD: SetProjType 3
(9) CMD: Partition 3
USER ERROR: The project MYPROJ is already contained in version of
application and cannot be placed into another library application.
Class: qqsp_UsageException
Error #: [1602, 562]
Detected at: qqcf_LibraryConfig::SetProject at 1
Error Time: Wed Sep 1 15:30:25
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 4C0B7D30-6055-11D3-B8B3-2E3EAC99AA77:0x126:0x1, taskId =
[4C0B7D30-6055-11D3-B8B3-2E3EAC99AA77:0x126:0x1.1]) in application
"fscript", pid 18036 on node mynode in environment myenv.
Thanks for any suggestion
j-paul
[Jean-Paul Gabrielli]
NOTE: If you got this twice, sorry but I got a strange mail saying i was not a subscriber and reposted.

Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed.

Re: (forte-users) Distributed Property

You have the answer. A class should set "Subclass Override" to TRUE (or ON)
if it wants any of its derived classes to override the behaviour.
If you want your subclass to be able set its Runtime properties
(Distributed, Shared, Transactional, Monitored), then turn ON "Subclass
override" in all the classes above in the hierarchy.
Jagadish
Tim Sawyer
<Tim.Sawyer@panc To: "'[email protected]'"
redit.com> <[email protected]>
cc:
04/17/2001 12:37 Fax to:
Subject: (forte-users) Distributed Property
Hello.
I've just created a service object, based on a new subclass. The new
subclass has distributed property set to allowed, and the other three set
to
disallowed. These are set about four layers further up the inheritance
hierarchy, and have subclass override turned off.
When I try and run my app, I get the following error:
USER ERROR: The class apiAbstractClasses.PanAPIReplicate used as the type
of
service object apiAbstractClasses.PanAPIReplicateSO has the 'Distributed'
property set to 'DISALLOWED', so it cannot be used as the type of a
service
object.
Class: qqsp_UsageException
Error #: [1602, 358]
Detected at: qqcf_GlobalDefinition::ProxyClass at 1
Last TOOL statement: method partws.HandleRunCmd
Error Time: Tue Apr 17 17:33:34
Exception occurred (locally) on partition "Forte_cl0_Client",
(partitionId
= 2DC37DB0-BD7A-11D4-A08F-220DA12BAA77:0x1ad3:0xb, taskId =
[2DC37DB0-BD7A-11D4-A08F-220DA12BAA77:0x1ad3:0xb.392]) in application
"FTLaunch_cl0", pid 318 on node TORGOS in environment 43DENV.
So I have distributed set to Allowed and the error says "Oh know you don't"
in true panto style.
Anyone like to suggest a direction I start looking in to fix this?
Cheers,
Tim Sawyer
Development Consultant
PanCredit
Leeds, UK.
This e-mail and its attachments are for the use of the addressee only.
It may contain information that is legally privileged, confidential and
exempt from disclosure. It is not a contract, and prices, data
and other information are not warranted as to completeness or accuracy.
Any comments or statements made herein do not necessarily
reflect those of PanCredit Systems Limited. If you are not the intended
recipient you must not copy, distribute or disseminate this e-mail
or attachments to anyone other than the addressee.
If you receive this communication in error please advise us by telephone
at once.
PanCredit Systems Limited
Tel: +44 113 250 0260
Fax: +44 113 250 0621
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: [email protected]

Hi Jagadish,
I'm not trying to change it, it's at "Allowed" on all of my superclasses,
and I want it to be "Allowed" on the subclass too. If I remember correctly
there's some blurb in the manual somewhere that objects are smaller and/or
quicker if you turn of the subclass override thing?
Anyway, apparently, according to other replies I've received, it's just a
forte bug, and I need to recreate the service object. I'll give it a go
when I get in to work tomorrow and come back to you all if it still doesn't
work...
Thanks everyone,
Tim Sawyer
Development Consultant
PanCredit
Leeds, UK.
-----Original Message-----
From: [email protected]
To: Tim Sawyer
Cc: '[email protected]'
Sent: 17/04/01 18:39
Subject: Re: (forte-users) Distributed Property
You have the answer. A class should set "Subclass Override" to TRUE (or
ON)
if it wants any of its derived classes to override the behaviour.
If you want your subclass to be able set its Runtime properties
(Distributed, Shared, Transactional, Monitored), then turn ON "Subclass
override" in all the classes above in the hierarchy.
Jagadish
This e-mail and its attachments are for the use of the addressee only.
It may contain information that is legally privileged, confidential and
exempt from disclosure. It is not a contract, and prices, data
and other information are not warranted as to completeness or accuracy.
Any comments or statements made herein do not necessarily
reflect those of PanCredit Systems Limited. If you are not the intended
recipient you must not copy, distribute or disseminate this e-mail
or attachments to anyone other than the addressee.
If you receive this communication in error please advise us by telephone
at once.
PanCredit Systems Limited
Tel: +44 113 250 0260
Fax: +44 113 250 0621

RE: (forte-users) Conductor Distributed AccessException

Man! you need some Gas. Top it up and give it a go :)
-----Original Message-----
From: mmynatt [mailto:mmynattcomponentsartistry.com]
Sent: Wednesday, 29 March 2000 10:19 am
To: Forte-Users-Digest
Subject: (forte-users) Conductor Distributed Access Exception
Hi,
Has anyone ever seen this error message in the conductor trace window on
starting an engine:
Channel.Open() Distributed Access exception on initiator channel "Ping" from
initiator component dbserv1(db unit) to component DB router primary caused
the channel to be disconnected.
The engine will not start.
Mark Mynatt
Components Artistry, Inc.
303-688-0784
mmynattcomponentsartistry.com <mailto:mmynattcomponentsartistry.com>

Hi Jagadish,
I'm not trying to change it, it's at "Allowed" on all of my superclasses,
and I want it to be "Allowed" on the subclass too. If I remember correctly
there's some blurb in the manual somewhere that objects are smaller and/or
quicker if you turn of the subclass override thing?
Anyway, apparently, according to other replies I've received, it's just a
forte bug, and I need to recreate the service object. I'll give it a go
when I get in to work tomorrow and come back to you all if it still doesn't
work...
Thanks everyone,
Tim Sawyer
Development Consultant
PanCredit
Leeds, UK.
-----Original Message-----
From: [email protected]
To: Tim Sawyer
Cc: '[email protected]'
Sent: 17/04/01 18:39
Subject: Re: (forte-users) Distributed Property
You have the answer. A class should set "Subclass Override" to TRUE (or
ON)
if it wants any of its derived classes to override the behaviour.
If you want your subclass to be able set its Runtime properties
(Distributed, Shared, Transactional, Monitored), then turn ON "Subclass
override" in all the classes above in the hierarchy.
Jagadish
This e-mail and its attachments are for the use of the addressee only.
It may contain information that is legally privileged, confidential and
exempt from disclosure. It is not a contract, and prices, data
and other information are not warranted as to completeness or accuracy.
Any comments or statements made herein do not necessarily
reflect those of PanCredit Systems Limited. If you are not the intended
recipient you must not copy, distribute or disseminate this e-mail
or attachments to anyone other than the addressee.
If you receive this communication in error please advise us by telephone
at once.
PanCredit Systems Limited
Tel: +44 113 250 0260
Fax: +44 113 250 0621

RE: (forte-users) Phantom Nodes

Yes both the client and server have to have the same setting and it does not
work all the time.
-----Original Message-----
From: Samer Kanjo [mailto:[email protected]]
Sent: Thursday, May 10, 2001 11:33 PM
To: Amin, Kamran; Forte Users
Subject: RE: (forte-users) Phantom Nodes
Kamran,
Just so I am clear on the use of keep alive settings,
the settings are required on both the server and the
client, correct? If so then should the settings on
both client and server nodes be equal?
Again to be clear, are you saying that the keep alive
settings alone will prevent phantom nodes?
Kelsey & Pascal, do you still have the problem even
though you are using keep alive settings?
Samer Kanjo
--- "Amin, Kamran" <[email protected]> wrote:
The socket time is an OS level setting and is
different on each OS. I had
open up a ticket with Forte 2 years ago and the only
quick solution was to
change the name of the client computer which faked
Forte into thinking its a
different node. This way the client was able to get
back into their
application quickly. The only problem was that the
clients had to reboot
their computer. The other way to prevent this was
to use the keep alive
settings to force a clean up on the Forte central
environment side.
ka
-----Original Message-----
From: Samer Kanjo [mailto:[email protected]]
Sent: Thursday, May 10, 2001 6:26 PM
To: [email protected]; Forte Users
Subject: RE: (forte-users) Phantom Nodes
Kelsey,
We use model nodes exclusively. Occasionally, a
client
node would crash and would be inaccessbile for two
hours but would still appear active under the model
node. After two hours the client could access the
environment again. My only option thus far has been
to
bounce the environment but that can only be done
after
work hours, which may not be convenient for the
affected user.
Kamran Amin just wrote me to say that the two hour
delay is the result of the default socket timeout
setting on UNIX boxes. Perhaps reducing the socket
timeout from two hours to something more reasonable
would fix the problem without manipulating the
environment configuration.
I am not sure how I would determine a good socket
timeout setting for my application. Does anyone have
any ideas? Is my assumption about reducing the
socket
timeout to avoid manipulating the environment
configuration to remove the phantom nodes in a more
timely fashion correct?
Samer Kanjo
--- [email protected] wrote:
"... have you reported this to Forte as a bug or
looked through the defect
reports?..."
No and No. I just kind of "stumbled" upon this
solution this week. I just
opened the properties windows when it just all ofa
suddened dawned on me:
"Maybe, if none of the boxes are checked then the
node effectively serves
no usefull purpose in the environment. Therefore,
maybe Forte will be more
apt to release it - like the garbage collectordoes
with an object that is
not referenced".
" ... Have you tried this technique when usingmodel
nodes? ..."
No I haven't. So far our model nodes have beenwell
behaved. If a member
was online the node was online, otherwise, if "no
one was home" then it was
off-line. Model nodes aren't real nodes; I viewthem
as a sort of virtual
node. Only real nodes have ocassionally behaved
goofy. I think what happens
is either the user's machine is improperlyshutdown
or they just all of
sudden loose connection to the network. Exception
handling was never Forte
ADE's forte.
Kelsey Petrychyn, P. Eng. SaskTel TechnicalAnalyst
ITM - Technology Solutions - Distributed Computing
Tel (306) 777 - 4906, Fax (306) 359 - 0857
Internet:[email protected]
Quality is not job 1. It is the only job!
Samer Kanjo
<skanjo@yahoo To:
"Forte Users" <[email protected]>
.com> cc:
Subject:
RE: (forte-users) Phantom Nodes
05/10/2001
01:57 PM
Pascal,
This is very inetresting. I have experienced the
same
problem and have noted the mysterious two hourdelay
in getting the client node back up and running. I
thought it may have had something to do with the
keepalive settings, which seem to work otherwise.
Kelsey, have you reported this to Forte as a bugor
looked through the defect reports? Have you tried
this
technique when using model nodes? I will give your
fix
of reconfiguring the node a try the next time I
encounter the problem. However, I use model nodesso
perhaps it may not have the same effect.
Samer Kanjo
--- "Rottier, Pascal" <[email protected]>
wrote:
I've seen this problem many times myself and the
cause was always the same.
The nodemanager of the phantom node was notproperly
shutdown. Usually,
because this node was running on NT and somebody
simply shutdown the
machine. A "kill -9" on unix will also have thesame
effect.
Part of the shutdown process of a node, which
you
should always invoke from
e-console or e-script, is to inform theenvironment
that it's going away.
Then Forte will mark it as offline, rather then
online. However, it the
nodemgr suddenly dies, there is no such signal.
=== message truncated ===

Therefore, how to remotely start a node manager ? :-p
j-p
-----Message d'origine-----
De: John Parks [mailto:jparkss1.com]
Date: vendredi 15 septembre 2000 20:07
À: Jean-Paul.Gabriellisema.fr
Cc: 'Forte Users'
Objet: Re: (forte-users) [Model Nodes] What prevents Server Parts to be
assigned there ?!:?
Jean-Paul,
The ModelNode is a client node by definiton, no matter what properties you
change. I've previously asked for an enhancement to allow a
model node to be a
server node, but I don't expect much to happen. To install
server applications
to several nodes, you have to make sure that the node manager on
each node is
active. There really is no built-in support for distributing
applications in
mass to servers like there is for clients (using the model node feature).
Regards,
John Parks
S1 Corporation
Jean-Paul Gabrielli wrote:
Hi,
I want to have a separate node to provide a dedicated service,
and therefore when I start my environment server and declared that
node as ModelNode, with 'client' disabled, i still can't assign to it
my server partition.
And if I declare it as regular node, the installation of the application
failed if the node is not online.
What choice do I have ?
What prevents that ModelNode, client disabled, to host serverpartition ?!,
j-paul gabrielli
sema dts
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe,send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com--
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

RE: (forte-users) What could have caused the StopWatch classto r eturn

Attila
1. Ops - I DO instantiate it as follows:
[snip]
sw : StopWatch = new;
[snip]
I missed the "= new" in the orig mail message (cut/past from wrong
workspace).
2. LogWriter(deltaT:integer, t1:DateTimeData, t2:DateTimeData)
[snip]
task.part.logmgr.put('| ');
task.part.logmgr.put(deltaT);
task.part.logmgr.put(' | ');
task.part.logmgr.put(t1);
task.part.logmgr.put(' | ');
task.part.logmgr.put(t2);
task.part.logmgr.putline(' |');
[snip]
OK, it's just a quick 'n dirty but it does the job for testing.
Regards,
Dirk
-----Original Message-----
From: Attila Rácz [mailto:[email protected]]
Sent: Thursday, 7 October 1999 14:35
To: Haben, Dirk
Subject: Re: (forte-users) What could have caused the
StopWatch class to
return a negative v alue?
Hi Dirk,
1. You don't instantiate the StopWatch object!!! So the
attached code have to
throw a NIL exception. On my PC it does:
"Trying to invoke a method on a NIL object (qqos_StopWatch, 1)."
2. Send the whole LogWriter method for analyzing.
Attila
"Haben, Dirk" wrote:
G'day
Suppose the following output is produced:
Loaded Forte Message Catalog 'fortemsg/en_us.cat'
NLM Startup is Complete - Partition's Locale is 'c'
Loading partition CollectResponseStatistics_cl0_Client built on 30-Sep-1999
09:12:28.
Attached to manager for node BLAH.
%DiH-I-VERID: CollectResponseStatistics_v371.002
%DiH-I-BGP, BGP Started...
%DiH-I, Repeat Interval (in milliseconds) 300000
%DiH-I, Sample Account Number: 123456
%DiH-I-BGPSTART, BackgroundProcessing started at: 07-Oct-1999 08:54:16
| Total Time | Account Fetch | Account Fetch |
| in milliSeconds | Start Time | Completion Time |
|-----------------|----------------------|----------------------|
| -194 | 07-Oct-1999 08:54:16 | 07-Oct-1999 08:54:17 |
What could cause the stopwatch class to return this negative value? Here is
the code that is run:
sw : StopWatch;
//that line is actual as follows:
sw : StopWatch = new;
//*****[Dirk]
>>
BP_t1 : DateTimeData = new;
BP_t2 : DateTimeData = new;
BP_t1.SetCurrent();
self.LogWriter('%DiH-I-BGPSTART, BackgroundProcessing started at: ',BP_t1);
self.LogWriterHeading();
tmpAcc : account = new;
sw.fire();
BP_t1.SetCurrent();
tmpAcc = self.AccountFetch(aAccountNumber);
BP_t2.SetCurrent();
deltaT : Integer = sw.split();
self.LogWriter(deltaT,BP_t1,BP_t2);
Oh, and the logwriter is just a formatted logmgr.put(deltaT) ,
logmgr.put(t1) etc
Any light on this one much appreciated.
Thanks,
Dirk
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to:
[email protected]
Attila Racz Lufthansa
Systems Hungary
BUD LSYH
E-mail: [email protected] .-``'.
Tel.: (36 1) 431-2910 .` .' Mazsa ter 2-6.
Fax : (36 1) 431-2977 _.-' '._ H-1107
Budapest, Hungary

Attila
1. Ops - I DO instantiate it as follows:
[snip]
sw : StopWatch = new;
[snip]
I missed the "= new" in the orig mail message (cut/past from wrong
workspace).
2. LogWriter(deltaT:integer, t1:DateTimeData, t2:DateTimeData)
[snip]
task.part.logmgr.put('| ');
task.part.logmgr.put(deltaT);
task.part.logmgr.put(' | ');
task.part.logmgr.put(t1);
task.part.logmgr.put(' | ');
task.part.logmgr.put(t2);
task.part.logmgr.putline(' |');
[snip]
OK, it's just a quick 'n dirty but it does the job for testing.
Regards,
Dirk
-----Original Message-----
From: Attila Rácz [mailto:[email protected]]
Sent: Thursday, 7 October 1999 14:35
To: Haben, Dirk
Subject: Re: (forte-users) What could have caused the
StopWatch class to
return a negative v alue?
Hi Dirk,
1. You don't instantiate the StopWatch object!!! So the
attached code have to
throw a NIL exception. On my PC it does:
"Trying to invoke a method on a NIL object (qqos_StopWatch, 1)."
2. Send the whole LogWriter method for analyzing.
Attila
"Haben, Dirk" wrote:
G'day
Suppose the following output is produced:
Loaded Forte Message Catalog 'fortemsg/en_us.cat'
NLM Startup is Complete - Partition's Locale is 'c'
Loading partition CollectResponseStatistics_cl0_Client built on 30-Sep-1999
09:12:28.
Attached to manager for node BLAH.
%DiH-I-VERID: CollectResponseStatistics_v371.002
%DiH-I-BGP, BGP Started...
%DiH-I, Repeat Interval (in milliseconds) 300000
%DiH-I, Sample Account Number: 123456
%DiH-I-BGPSTART, BackgroundProcessing started at: 07-Oct-1999 08:54:16
| Total Time | Account Fetch | Account Fetch |
| in milliSeconds | Start Time | Completion Time |
|-----------------|----------------------|----------------------|
| -194 | 07-Oct-1999 08:54:16 | 07-Oct-1999 08:54:17 |
What could cause the stopwatch class to return this negative value? Here is
the code that is run:
sw : StopWatch;
//that line is actual as follows:
sw : StopWatch = new;
//*****[Dirk]
>>
BP_t1 : DateTimeData = new;
BP_t2 : DateTimeData = new;
BP_t1.SetCurrent();
self.LogWriter('%DiH-I-BGPSTART, BackgroundProcessing started at: ',BP_t1);
self.LogWriterHeading();
tmpAcc : account = new;
sw.fire();
BP_t1.SetCurrent();
tmpAcc = self.AccountFetch(aAccountNumber);
BP_t2.SetCurrent();
deltaT : Integer = sw.split();
self.LogWriter(deltaT,BP_t1,BP_t2);
Oh, and the logwriter is just a formatted logmgr.put(deltaT) ,
logmgr.put(t1) etc
Any light on this one much appreciated.
Thanks,
Dirk
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to:
[email protected]
Attila Racz Lufthansa
Systems Hungary
BUD LSYH
E-mail: [email protected] .-``'.
Tel.: (36 1) 431-2910 .` .' Mazsa ter 2-6.
Fax : (36 1) 431-2977 _.-' '._ H-1107
Budapest, Hungary

What does this mean: ERROR! Shared library ioser12 could not be found.

Hi all,
I am trying to establisch a JDBC connection to a MaxDB database (former SapDB).
I have a win2k system with jdk 1.4.2_01 installed.
I have the JDBC connection working in the sense that i am able to execute SQL scripts by ant tasks,
so far i think that everything is properly configured.
Nevertheless, when i try to use the connection in my own class (a JUnit testcase), i get this message:
"ERROR! Shared library ioser12 could not be found."
The program then continues, and i get sql error messages that the user is still connected. I think these are followups from the first one - one testcase may be broken by this error, but the connection is not closed.
I searched the web to find what i could do against it. I found some forum discussions about this problem and hence i tried to set my path and classpath to locations where the isoser12.dll is located (runtime environment/bin), and finally copied it to the windows/system32 dir.
Nothing made this error disappear. I am still stuck with this one since two days.
Btw, the same testcases work well with other databases like oracle or db2.
Hence, i am calling to you for some ideas about this error.
Thank you in advance for help,
Andreas Schroeder

Hi Andreas,
I am also interested in making maxdb(sapdb) work with S1 application server. I would appreciate if you could let me know if you are able to make it work with S1 V8 server.
Thanks,
Gorton Zhao
Hi all,
I am trying to establisch a JDBC connection to a MaxDB
database (former SapDB).
I have a win2k system with jdk 1.4.2_01 installed.
I have the JDBC connection working in the sense that i
am able to execute SQL scripts by ant tasks,
so far i think that everything is properly configured.
Nevertheless, when i try to use the connection in my
own class (a JUnit testcase), i get this message:
"ERROR! Shared library ioser12 could not be found."
The program then continues, and i get sql error
messages that the user is still connected. I think
these are followups from the first one - one testcase
may be broken by this error, but the connection is not
closed.
I searched the web to find what i could do against it.
I found some forum discussions about this problem and
hence i tried to set my path and classpath to
locations where the isoser12.dll is located (runtime
environment/bin), and finally copied it to the
windows/system32 dir.
Nothing made this error disappear. I am still stuck
with this one since two days.
Btw, the same testcases work well with other databases
like oracle or db2.
Hence, i am calling to you for some ideas about this
error.
Thank you in advance for help,
Andreas Schroeder

Re: (forte-users) Ok, what's the "secret" for setting serverside envi

Dear Robinson,
It seems to be that you have 2 ways of solving the problem:
1) restart forte after setting the environment variables
2) write a little application which sets the required variables, using
the task.part.OperatingSystem.SetEnv(name,value) method.
If you have to chage the variables rarely, then it`s easier to restart forte,
otherwise I would suggest to use the SetEnv function...
Best Regards,
Tamas Deak
"Robinson, Richard" wrote:
Subject says it all.
We have a bunch of environment variables that are used by the server side
objects. What I want to do is change the value of some of the variables
prior to running my application in Forte Development IDE (3.0.G.2). I've
tried to set the environment variables via NT's registry, but it appears
that at execution time the variables take on the value of whatever they are
for the node manager.
Most IDE's I've worked with before have a way to specify environment
variables right in the tool. Forte doesn't appear to have that capability -
say it ain't so!
Any clues?
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: [email protected]
Tamas Deak
Lufthansa Systems Hungary
(forte developer)
2-6 Mazsa ter, Budapest, 1107, HUNGARY
(36-1) 4312 973
[email protected]
[email protected][email protected]-

Richard,
There is no way of changing the environment variable once the Node
Manager is up. You will have to shutdown the node manager and then restart
it to have the new environment variables take effect. Sorry, there is no
secret way of doing this that I know of.
But you can set the variables on you development machine and run you
application without distributing. This way the partition will be running in
your client machine and not the server.
Another way we have also got around this is by having a special
environment variable on the client side that opens a admin screen when you
run you application. This admin screen will allow you to change the
environment variables and then set them on the server partition. You will
have to do come coding on the server to make this happen but if you are
using a framework then it should be easy. We call this developer reconnect
facility. It only can be activated by the special client side environment
variable. I comes in very handy when we are development and want to change
the database on the server partition.
Hope this help.
ka
Kamran Amin
Framework, Inc.
303 South Broadway
Tarrytown, NY 10591
(914) 631-2322x121
[email protected]
http://www.frameworkinc.com/
-----Original Message-----
From: Robinson, Richard [mailto:[email protected]]
Sent: Thursday, November 04, 1999 7:23 AM
To: [email protected]
Subject: (forte-users) Ok, what's the "secret" for setting server side
environment varia bles when running in the Forte Development
Environment?
Subject says it all.
We have a bunch of environment variables that are used by the server side
objects. What I want to do is change the value of some of the variables
prior to running my application in Forte Development IDE (3.0.G.2). I've
tried to set the environment variables via NT's registry, but it appears
that at execution time the variables take on the value of whatever they are
for the node manager.
Most IDE's I've worked with before have a way to specify environment
variables right in the tool. Forte doesn't appear to have that capability -
say it ain't so!
Any clues?
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: [email protected]

It says,The project could not be prepared for publishing because an error occurred. (Error in user parameter list)" What do i do so i can publish it?

it says,The project could not be prepared for publishing because an error occurred. (Error in user parameter list)" What do i do so i can publish it?

I'm having the same problem.
When I export (and I want HD quality) I get the error message that
Unable to prepare project for publishing The project could not be prepared for publishing because an error occurred. (Error in user parameter list)
How do I free up more space on my startup disk? My hard drive has 158.61 GB free. Do I need to free up more space?

Imported album to itunes library but it will not sync to my ipod, tried with my husbands ipod and the same thing. What could be the problem?

imported an album to my itunes library, but it won't sync with my ipod classic. I tried it with my husbands ipod also and the same problem. What could be the problem?

Thank you all for your replies. Here is what i ended up doing. I cannot afford any 3rd party software so i went to itunes and manually entered all my playlists. As I had indicated my purchased music was on my new computer just not the playlists and I could not sync my ipod. After I rebuilt all my playlists I tried to restore my ipod to factory defaults/new. All of the steps called for in apple support and elsewhere were not available to me. I connected my ipod, went to my computer, right clicked my ipod, and formatted. That wiped my ipod so when I connected to itunes it then gave me a restore option. I did the restore and all is good in the empire again. I can now buy new music and sync my ipod so I am a happy camper.
Thanks to all.

I recently installed IOS 8.02 and Photoshop Express cannot access my full library of images. What could be the problem? Also, w

Problem with Photoshop Express IOS 8.02 - I recently installed IOS 8.02 on my iPad Air and Photoshop Express cannot access my full library of images. Also, when opening the app, I'm not given the option of selecting "Open from Adobe Revel", "Take a Picture" or "Open from Camera Roll".......I am taken directly to a small selection of images. The only images that show up are the saved photos previously adjusted through Photoshop Express. I also updated my iPhone 5s with IOS 8.02 and Photoshop Express works perfectly on the iPhone with all images in my library visible.
What could be the problem?

Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think?

Time machine only copies User Info and Users (Applications, Library, and System are missing) from my quad core Mac Pro. 45 Gb of 162 Gb are missing. Any one having success with time machine copying all folders using Mavericks? What do I need to do dif

Time machine only copies User Info and Users (Applications, Library, and System are missing) from my quad core Mac Pro. 45 Gb of 162 Gb are missing. Any one having success with time machine copying all folders using Mavericks?
What do I need to do differently?

The late, great Pondini was investigating that issue before he passed away.
See here: https://discussions.apple.com/thread/5125969
I think there might be information there on how to reset Time Machine to do a full backup. I think you basically have to reset it and start over.

RE: (forte-users) Is there a later version than Forte v30L2?What 's th

Hi,
We have recently upgraded to 30L4, and Forte say that this fixes a
corruption problem with the repository to do with large projects.
This patch also fixes the problem with AfterValueChange event on
FillInFields.
Upgrading was simple for us as we don't use Express.
R4 is still next year some time as far as I know.
Regards,
Jace.
Jason de Cean
Genisys Team
Lumley Technology Ltd.
Lvl. 8, 55 Sussex St
Sydney, NSW 2000 Australia
Ph: 02 9248 1321
-----Original Message-----
From: Haben, Dirk [mailto:[email protected]]
Sent: Wednesday, 20 October, 1999 3:06
To: 'Soapbox Forte Users'
Subject: (forte-users) Is there a later version than Forte v30L2? What's
the news on R4?
G'day
Someone posted a while back about Forte v30L2 having a minor problem
with
the repository. What's the latest on v30L2 and is there a later release
worth going/waiting for - from v30G2?
What's the release plan for R4 - and what's in it?
Is SynerJ vastly different to Forte - complement, supplement? Any
management
issues to know/learn about?
When will we see integration of selected projects to baseline only
rather
than whole workspace?
Thanks,
Dirk
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a
new
email the word: 'Unsubscribe' to: [email protected]

I know system management for SynerJ is more complicated. I just got the
1.4.1 version of SynerJ and it has completely changed on how partitioning
work regarding the EJBs. Just more to learn to do the same thing we did in
Forte.
ka
Kamran Amin
[email protected]
(203)-459-7362 or 8-204-7362 - Trumbull
From: Peter Sham[SMTP:[email protected]]
Sent: Wednesday, October 20, 1999 9:55 AM
To: Haben, Dirk; 'Soapbox Forte Users'
Subject: Re: (forte-users) Is there a later version than Forte v30L2?
What's the news on R4?
Hi,
I guess many people is interested in finding out how different it is
between SynerJ and TOOL.
Here is something to share.
1. Forte is posting all manuels ( SynerJ, Fusion, Conductor ) on the Web.
You just need a customer login in. Here is a good start.
2. java.sun.com now has a beta document J2EE APM which explain the
architectual of J2EE. The document how and when you will use JSP,
Servlet, EJB & Java Bean etc. You will find it along with the J2EE beta
free download.
My feeling is: on system management level, SynerJ is more or less similiar
with what we have now ( maybe they jus rewriting everything in Java ).
However, on development and design level, there is quite a large
difference. Nevertheless, it's exciting.
Regards,
Peter Sham.
"Haben, Dirk" <[email protected]> wrote:
G'day
Someone posted a while back about Forte v30L2 having a minor problem
with
the repository. What's the latest on v30L2 and is there a later
release
worth going/waiting for - from v30G2?
What's the release plan for R4 - and what's in it?
Is SynerJ vastly different to Forte - complement, supplement? Any
management
issues to know/learn about?
When will we see integration of selected projects to baseline only
rather
than whole workspace?
Thanks,
Dirk
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in
a new
email the word: 'Unsubscribe' to:
[email protected]

I installed the CC trial with an error window saying: Could not create the file '/Users/dranim/Library/Preferences/Adobe/After Effects/13.2/dummy'. That was the first window. Heres the second: After Effects can't continue: unexpected failure during app

I installed the CC trial with an error window saying: Could not create the file '/Users/dranim/Library/Preferences/Adobe/After Effects/13.2/dummy'. That was the first window. Heres the second: After Effects can’t continue: unexpected failure during application startup I paid for the month subscription of 29.99. It claims it is downloading again?! Am I missing something here? Why is this process so complicated? I need to get this resolved asap and start working.

I originally had Adobe Photoshop Extended, then upgraded to the Production Suite. I ran the Adobe Cleaner, and that uninstalled most Adobe products, including my existing Adobe install, and then I re-installed everything with the same error code. Since CS4 came with CS5, I've installed AE CS4, but would really like to upgrade because I'm new to Creative Suite, and not sure how CS4 integrates with CS5...CS4 After Effects installed perfectly. I do have a 64 bit system, and installing to an OCZ Vertex 2....every other suite installs perfectly, except AE. And I think that is the coolest program in the Suite. I thank you all so much for taking the time to help, I really want to get AECS5 running...I did try to install after doing the recommended items Adobe suggests for Exit Codes 6 and 7, including turning off many startups...
I'm baffled....
Ben

When I launch After Effects I get a warning saying: Could not create the file'/Users/mayname/Library/Adobe/After effects/13.0/dummy'.

When I launch After Effects I get a warning saying: Could not create the file'/Users/mayname/Library/Adobe/After effects/13.0/dummy'.

See this:
fixing permissions problem that impedes start of Adobe applications

RE: (forte-users) Distributing library - What could preventmy li b fro

Similar Messages

Maybe you are looking for