Re: (forte-users) No response from Router partition

Sounds like what we have been experiencing here, on Unix.
According to Forté, upgrading to 3M should resolve it. Unfortunately, we
can't
confirm it yet, as we are in the process of upgrading and testing.
I believe this is documented as an "internal" Forté bug report.
Hope this hels.
Daniel Désy
BORN
----- Original Message -----
From: "Pabbaraju, Ramarao (EXP N-IONIDEA)" <ramarao.pabbarajulmco.com>
To: "Forte-Users (E-mail)" <forte-userslists.xpedior.com>
Sent: Tuesday, November 14, 2000 10:46 AM
Subject: (forte-users) No response from Router partition
Hi All,
One of the router partitions on NT server stops responding once in awhile. We can not get to it through escript or econsole and the only
solution we have is to shutdown the ftexec using task manager and start
the partition again. We don't see any error messages in the log except
this line "LbRouter::AttachToRouter - Ignoring DOM version: -1 obj
version: 0". Does anyone have any idea what this means? Is there any way
to figure out the problem? We are using Forte 3L3. Thanks in advance.
Thanks
Ramarao--
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a
new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

My guess is, your third service object is not referenced.
-----Original Message-----
From: Forte App [mailto:forteapphotmail.com]
Sent: Wednesday, May 17, 2000 3:08 PM
To: kamranaminyahoo.com
Subject: (forte-users) Partition problem
Hello Everyone,
I have three (3) service objects in my project and when i went into
partition workshop i can only see two service objects instead of three and
all the three service objects properties settings are same
iam using Forte 3.0L2.
Thanks in Advance
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

Similar Messages

RE: (forte-users) appdist copy from VMS to NT question...

Well, there are some graphic FTP clients for windows that allow
you to get files from FTP-servers using simple drag and drop.
Most of them even support the option of selecting a directory
and dragging it, with all its subdirectories, to your local drive
with a single mouse action.
The only problem might be with binary vs. text files. The appdist
directory has both filetypes. Getting text files as if they were
binary files may cause problems. Getting binary files as if they
were text certainly will cause problems. So, either get the
whole tree binary and hope for the best. Or get each file indi-
vidually and set the correct bin or asc setting. Or use a tool
that is smart enough to see if a file is binary or text and hope
it doesn't make any mistakes.
Pascal Rottier
STP - MSS Support & Coordination Group
Philip Morris Europe
e-mail: [email protected]
Phone: +49 (0)89-72472530
+++++++++++++++++++++++++++++++++++
Origin IT-services
Desktop Business Solutions Rotterdam
e-mail: [email protected]
Phone: +31 (0)10-2428100
+++++++++++++++++++++++++++++++++++
Don't meddle in the affairs of dragons
'cause you're crunchy and taste good with ketchup
-----Original Message-----
From: Haben, Dirk [SMTP:[email protected]]
Sent: Wednesday, December 08, 1999 6:32 AM
To: 'Soapbox Forte Users'
Subject: (forte-users) appdist copy from VMS to NT question ...
G'day Folxs
Does anyone here have a simple way to copy a whole appdist tree for myapp1
say from VMS to NT? I have created a new environment on a NT box and want
to
copy down all our application distributions.
eg:
On OpenVMS machine vmsbox1 the directory tree and files
vmsbox1::forte_root:[appdist.aenv_myapp_cl3...]*.*;
should go to NT machine ntbox1
[ntbox1] d:\temp\myapp\cl3\...
Even just to d:\temp\aenv_myapp_cl3\... will do.
ftp doesn't seem to do the trick here. Of cause I could write some routine
to put/get file by file - but before I do all that I thought I ask around
if
it's already been done.
Thanks,
Dirk
PS: Needless to say we still develop and makedist on VMS - for now (see
Bulletin 388)!
PPS: No I haven't forgotten about [appdist.aenv.myapp1]*.ace
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: [email protected]

Well, there are some graphic FTP clients for windows that allow
you to get files from FTP-servers using simple drag and drop.
Most of them even support the option of selecting a directory
and dragging it, with all its subdirectories, to your local drive
with a single mouse action.
The only problem might be with binary vs. text files. The appdist
directory has both filetypes. Getting text files as if they were
binary files may cause problems. Getting binary files as if they
were text certainly will cause problems. So, either get the
whole tree binary and hope for the best. Or get each file indi-
vidually and set the correct bin or asc setting. Or use a tool
that is smart enough to see if a file is binary or text and hope
it doesn't make any mistakes.
Pascal Rottier
STP - MSS Support & Coordination Group
Philip Morris Europe
e-mail: [email protected]
Phone: +49 (0)89-72472530
+++++++++++++++++++++++++++++++++++
Origin IT-services
Desktop Business Solutions Rotterdam
e-mail: [email protected]
Phone: +31 (0)10-2428100
+++++++++++++++++++++++++++++++++++
Don't meddle in the affairs of dragons
'cause you're crunchy and taste good with ketchup
-----Original Message-----
From: Haben, Dirk [SMTP:[email protected]]
Sent: Wednesday, December 08, 1999 6:32 AM
To: 'Soapbox Forte Users'
Subject: (forte-users) appdist copy from VMS to NT question ...
G'day Folxs
Does anyone here have a simple way to copy a whole appdist tree for myapp1
say from VMS to NT? I have created a new environment on a NT box and want
to
copy down all our application distributions.
eg:
On OpenVMS machine vmsbox1 the directory tree and files
vmsbox1::forte_root:[appdist.aenv_myapp_cl3...]*.*;
should go to NT machine ntbox1
[ntbox1] d:\temp\myapp\cl3\...
Even just to d:\temp\aenv_myapp_cl3\... will do.
ftp doesn't seem to do the trick here. Of cause I could write some routine
to put/get file by file - but before I do all that I thought I ask around
if
it's already been done.
Thanks,
Dirk
PS: Needless to say we still develop and makedist on VMS - for now (see
Bulletin 388)!
PPS: No I haven't forgotten about [appdist.aenv.myapp1]*.ace
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: [email protected]

RE: (forte-users) returning variants from OLE methodcalls

I'm getting an error when calling an OLE method which
requires two VARIANT
parameters, one input and one output. Both parameters are treated as
arrays
by the OLE method.
Error during Invoke; status code: -2147352562(0x8002000E)This error is "Invalid Number of Parameters"
The code itself, I cannot really comment on as I have had very little
experience with COM objects
Cheers
David McPaul
Lumley Technology
This message has been Content Filtered by MailMarshal.
---------------------------------------------------------------------

As an FYI, to find out what the error message means, you can take the hex
number (in this case 0x8002000E) and search through the winerror.h file.
That will give you a better idea of what the actual problem is.
Katie Tierney
Akili Systems Group
601 Jefferson, Suite 3975
Houston, Texas 77002
Office: (713) 655-1400
Cell: (409) 255-1643
"The bitterness of poor quality remains long after the sweetness of low
price is forgotten" --Larry Anderson
-----Original Message-----
From: David McPaul [mailto:dmcpaullumley.com.au]
Sent: Tuesday, March 07, 2000 5:27 PM
To: 'Isaak Peretsman'; forte-userslists.xpedior.com
Subject: RE: (forte-users) returning variants from OLE method calls
I'm getting an error when calling an OLE method which
requires two VARIANT
parameters, one input and one output. Both parameters are treated as
arrays
by the OLE method.
Error during Invoke; status code: -2147352562(0x8002000E)This error is "Invalid Number of Parameters"
The code itself, I cannot really comment on as I have had very little
experience with COM objects
Cheers
David McPaul
Lumley Technology
This message has been Content Filtered by MailMarshal.
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

Waiting on a user's response (from the gui)

This should be a really simple problem, but I can't work it out.
I have two classes, my Engine and my Gui. The Engine tells the Gui what to display, the gui displays it and has methods to fire events when a user presses a button. I want to do something like the following
public class Engine {
Gui gui;
String[] pictures;
// ... a bunch of stuff
public void showPictures {
for (int i=0; i<pictures.length; i++)
gui.showPicture(pictures);
// wait on the user's response
Here's the question: preferably without using threading (though I could if I had to), how can I wait on a user's response from within a loop?
I considered having a boolean flag "hasResponded" in the gui, and then having a do-while loop just spinning until it saw that gui.hasResponded was equal to true, but it seems that this would add a lot of unnecessary processing load.
Any thoughts?
Thanks!

don1983p wrote:
I have the same question "So question is still just the simple one above: can I (easily) wait on some event, like the gui recording an action or anything else, from within a loop?"...If you have a question to ask, do so in a new thread. Don't resurrect a long-dead thread. Sure you can refer to it and even link to it, but let it rest in peace.
Any new ideas?Why would you expect the answer to change? You don't do this via a loop as GUIs don't work like this. Have you gone through the Swing tutorials? If not, please go through them as they'll show you how to do this correctly.
I wrote a WHILE loop, the condition of the loop being the values (getActionCommand) of some buttons being pressed. How can I wait for another button being pressed so I can get out of the loop?You don't. If you need to time a response, then use a Swing Timer. But most importantly, read the Swing tutorials.

[Fwd: (forte-users) Sending Fax from forte]

Tamas Deak
Lufthansa Systems Hungary
(forte developer)
2-6 Mazsa ter, Budapest, 1107, HUNGARY
(36-1) 4312 973
[email protected]
[email protected][email protected]-

I've never done this but I think MS-MAPI might be a good solution.
Sure, it's not platform independent, since it will only work on NT,
but it is fax-gateway independent. MAPI is an interface to several
messaging systems (mail, RFC's, fax, etc.) regardless of what
kind of implementation is behind it.
Pascal Rottier
STP - MSS Support & Coordination Group
Philip Morris Europe
e-mail: [email protected]
Phone: +49 (0)89-72472530
+++++++++++++++++++++++++++++++++++
Origin IT-services
Desktop Business Solutions Rotterdam
e-mail: [email protected]
Phone: +31 (0)10-2428100
+++++++++++++++++++++++++++++++++++
/* All generalizations are false! */
-----Original Message-----
From: Zulkifli Mohamad [SMTP:[email protected]]
Sent: Friday, October 08, 1999 3:16 AM
To: '[email protected]'
Subject: (forte-users) Sending Fax from forte
Hi guys,
Does anyone know how to send a fax from Forte application.
Any ideas appreciated!
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: [email protected]

"This message may not have been delivered to User Name because there was no response from the server." in IM chat

Hello All,
Sometime users are getting below error message on the IM windows when they having P2P IM Chat.
"This message may not have been delivered to User Name because there
was no response from the server."
I can see below error on the Lync 2013 Monitoring page.

Hi,
Please make sure all required ports have been allowed. You can verify that all ports are open can accepting connections using telnet.
Telnet from External Client:
Test to SIP.domain.com 443/SIP
Test to WebConf.domain.com 443/PSOM
Test to AV.domain.com 443/STUN
Telnet from Lync 2013 Edge:
Telnet to Pool.domain.com 5061/SIP
Telnet from Lync 2013 Pool:
Telnet to LyncEdge.domain.com 5061
Telnet to LyncEdge.domain.com 443
Telnet to LyncEdge.domain.com 5062
Telnet to LyncEdge.domain.com 4443
Telnet to LyncEdge.domain.com 8057
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

RE: (forte-users) Escript - Loading distrib from specifiednode ?

JP,
you can't do it. As says the help file on loaddistrib, :
"The distribution to be loaded is in the FORTE_ROOT/appdist/<envname>
directory hierarchy
on the node running escript."
So, you have to run escript on the server or the node having the distrib.
Patrice
-----Message d'origine-----
De: Jean-Paul Gabrielli [mailto:Jean-Paul.Gabriellisema.fr]
Date: mercredi 1 mars 2000 17:59
À: Forte-Users
Objet: (forte-users) Escript - Loading distrib from specified node ?
Hi,
When I do 'listdistrib' in escript, it says 'nothing in local',
which is fine.
How do I focus on 'remotenode' for
'loaddistrib' to be able to find the distribution ?
thanks
j-paul gabrielli
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

FindActEnv
FindSub anyNode
ListDistrib
LoadDistrib MyAppp
should do it.
Taras Katkov
BOURDON Patrice wrote:
>
JP,
you can't do it. As says the help file on loaddistrib, :
"The distribution to be loaded is in the FORTE_ROOT/appdist/<envname>
directory hierarchy
on the node running escript."
So, you have to run escript on the server or the node having the distrib.
Patrice
-----Message d'origine-----
De: Jean-Paul Gabrielli [mailto:Jean-Paul.Gabriellisema.fr]
Date: mercredi 1 mars 2000 17:59
À: Forte-Users
Objet: (forte-users) Escript - Loading distrib from specified node ?
Hi,
When I do 'listdistrib' in escript, it says 'nothing in local',
which is fine.
How do I focus on 'remotenode' for
'loaddistrib' to be able to find the distribution ?
thanks
j-paul gabrielli
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

Received response from host (router IP address) with invalid source port 32784

I replaced my old wireless router with a Cisco Linksys E4200, running firmware version 1.0.02 build 13 May 24, 2011. About once a minute the router sends an unsolicited DNS message to the IPV4 multicast address 01:00:5e:00:00:fb with a destination IP address of 224.0.0.251. The unsolicited message is a DNS response with source port 32784, transaction ID 0, flags 0x8400 (standard query response, no error), questions 0, answer RRs 2, authority RRs 0 and additional RRs 1. The two answers both relate to the router itself: one has Name Cisco18738.local, type A (host address), class 1 (IN), cache flush true, time to live 1 minute, data length 4, and the address of the router. The other is the reverse of the same address. The additional record is for Cisco18738.local, type NSEC, class IN, cache flush true, time to live 1 minute, data length 5, next domain name Cisco18738.local, RR type A (host address).
When my desktop computer receives these messages it logs an error, for example: "Jun 23 07:39:22 sauterws02 avahi-daemon[1067]: Received response from host 10.146.9.1 with invalid source port 32784 on interface 'eth0.0'" The 10.146.9.1 is the router's IP address. I also see these messages on the wireless link from my laptop.
I suppose the E4200 is generating these DNS messages in a misguided attempt to make sure there is no old information about its name. Is there a way to turn them off? If not, is there a way to report this to Cisco as a bug?
Solved!
Go to Solution.

gv wrote:
1. To contact Linksys, call support.
2. From the internet draft: "Multicast DNS implementations MUST
silently ignore any Multicast DNS Responses they receive where the
source UDP port is not 5353." Your avahi-daemon does not comply with this draft.
Thank you for the reference. For the sake of others who may read this thread, the current draft of multicast DNS is at http://www.ietf.org/id/draft-cheshire-dnsext-multicastdns-14.txt.
Here is the whole paragraph from which you quoted, from section 6 (Responding): "The source UDP port in all Multicast DNS Responses MUST be 5353 (the well-known port assigned to mDNS). Multicast DNS implementations MUST silently ignore any Multicast DNS Responses they receive where the source UDP port is not 5353."
Thus, it appears that there are two errors here: the Cisco E4200 is not using 5353 as the source port, and the logger is not silently ignoring it.
The message appears to be an announcement rather than an actual response to a query. In section 8.3 (Announcing) I found this paragraph: "A Multicast DNS Responder MUST NOT send announcements in the absence of information that its network connectivity may have changed in some relevant way. In particular, a Multicast DNS Responder MUST NOT send regular periodic announcements as a matter of course." Thus, it appears that there are three errors here.

Error Message "waiting for response from user"

When some people invite me to chat on Ichat, they get an error message saying "waiting for response from user." On my end, I never get the invite. Other people are able to invite me without any problem. How do I fix this? Is the problem on my end?
Thank you!

Hi,
I can see now where the issue is.
A Jabber Buddy list can only accept Jabber Buddies.
A Buddy List that Logs into AIM such as your @Me.com name can only add Valid AIM Names to it as Buddies.
The main problem is that both Jabber IDs and AIM names can have the @symbol on them and look like email addresses.
Example Jabber IDs
Example "AIM " Names
[email protected]
ralphjonhsr (No @)
[email protected]
[email protected] (Apple ID type)
[email protected]
[email protected] (Apple ID type)
any Facebook name
[email protected] (Email registered with AIM)
So your Jabber Buddy List will find that there is No (@)me.com Jabber server and say the message cannot be delivered.
The AIM (@Me.com) Buddy never gets the Request for Authorisation for the same reason and the auto response of adding An ID/Name to Send a Message to starts iChat wanting that person to Accept or Decline being a Buddy- which they cannot do - so you get the name with the "Waiting for..." message.
Either everyone gets a Jabber ID or everyone gets a Valid AIM Name.
8:39 PM Friday; October 28, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

How to create a VI that detects and records responses from user

Does anyone has experience in creating a VI that allows the user to e.g., watch a video or series of images, pause or rewind video etc. and the VI records the duration of all pauses or user responses.

avenue wrote:
How to create a VI that detects and records responses from user
You definitely need to check what 'EVENT STRUCTURE' is and how to use it... because thats needed to write such code.
I am not allergic to Kudos, in fact I love Kudos.
Make your LabVIEW experience more CONVENIENT.

RE: (forte-users) Reading return value from Javaprogram

when using the RunCommand method you can specify the an error file:
task.part.os.RunCommand(command = l_tdCommandLine,
isSynchronous = TRUE,
inputFile = Nil,
outputFile = Nil,
errorFile = l_ErrorFile.GetLocalName(TRUE));
BEGIN
l_ErrorFile.Open(SP_AM_READ);
EXCEPTION
WHEN Ex: FileResourceException DO
l_ErrorFile = NIL;
task.ErrorMgr.Clear();
END;
IF l_ErrorFile <> NIL THEN
l_tdFileContents : TextData = New();
l_ErrorFile.ReadText(l_tdFileContents);
l_ErrorFile.Close();
END IF;
Have you java program output the return value to the standard IO. This way
you will have an error file that you can read from Forte.
ka
-----Original Message-----
From: Anthony D [mailto:saigonxyahoo.com]
Sent: Tuesday, September 12, 2000 7:49 AM
To: forte-userslists.xpedior.com
Subject: (forte-users) Reading return value from Java program
Hi,
Does anyone know whether Forte application can
read a return value from a Java program?
I'm using the RunCmd method to invoke the Java
program. I'd like to read the return value from the
Java program. How do I go about doing it?
Any suggestion will be appriciated.
Thanks
AD
http://mail.yahoo.com/
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

when using the RunCommand method you can specify the an error file:
task.part.os.RunCommand(command = l_tdCommandLine,
isSynchronous = TRUE,
inputFile = Nil,
outputFile = Nil,
errorFile = l_ErrorFile.GetLocalName(TRUE));
BEGIN
l_ErrorFile.Open(SP_AM_READ);
EXCEPTION
WHEN Ex: FileResourceException DO
l_ErrorFile = NIL;
task.ErrorMgr.Clear();
END;
IF l_ErrorFile <> NIL THEN
l_tdFileContents : TextData = New();
l_ErrorFile.ReadText(l_tdFileContents);
l_ErrorFile.Close();
END IF;
Have you java program output the return value to the standard IO. This way
you will have an error file that you can read from Forte.
ka
-----Original Message-----
From: Anthony D [mailto:saigonxyahoo.com]
Sent: Tuesday, September 12, 2000 7:49 AM
To: forte-userslists.xpedior.com
Subject: (forte-users) Reading return value from Java program
Hi,
Does anyone know whether Forte application can
read a return value from a Java program?
I'm using the RunCmd method to invoke the Java
program. I'd like to read the return value from the
Java program. How do I go about doing it?
Any suggestion will be appriciated.
Thanks
AD
http://mail.yahoo.com/
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

Please delete my name from Forte User Forum

Please delete my name from Forte User Forum.

> would you be able to please delete my website name
don*ban*it from my forums.
> Could you fill the name in with some stars or something.
When doing a search
> in the search engines these forums appear as results
showing the conversations
> to the whole world. Thank you!!!!!!
you are asking about something in a post made in November of
07.
Deleting or editing it here will have no effect on the
http://groups.google.com
archive, or the probably dozens of sites that
scrape the content from here to use as "content" in their
websites.
deleting the site's domain name from here now will not change
the results
you get in search engines.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Drop me from the forte-users list

Please drop me from the forte-users list. [email protected]
Thanks

I think you may need to contact customer service regarding your request. Just click the link below to see the instructions on how you can get in touch with the Support team ;
http://community.skype.com/t5/The-Skype-Lounge/How-to-Contact-Skype-Customer-Service/td-p/2056783
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES
SEE MORE TIPS, TRICKS, TUTORIALS AND UPDATES in
| skypefordummies.blogspot.com |

Migrating users from other partitions

I'm dealing with "Epic Stupid" in how Apple handles something in 10.4.
My hard drive developed a few bad blocks. It's becoming unusable because apparently those bad blocks are directly under certain key files, because it's hard to do much without getting "stun locked" by the gorram beach ball.
Anyway, my disk has a second partition on it which was unused. I went ahead and formatted that partition, wrote the partition with zeros (which I hope had the effect of flagging all bad blocks), and installed OS X 10.4.10 from the DVD's.
Naturally the system comes up and treats me like I'm a completely new user of MacOS. It allows me to import users from other partitions -- but here's the problem. It wants to migrate the users, which would be great for preserving disk permissions - but then it wants to COPY ALL THEIR DATA. That's ridiculous. Their data is already on the other partition. I want to copy the identities but not all their data.
How am I supposed to do that? Import the user identities and tie it back to the UID that's on the other partition so <user X> can access <user X>'s data?
By the way, other than that, putting the boot OS on the new partition is working great. No beach balls unless I touch the other partition.

Yeah I know Virtually all of my data is copied off already. I say "virtually" because the backup was piecemeal, and I'm
a) not 100% sure I got everything and
b) not looking forward to hand-reassembling my entire environment from scratch. I.E. I don't relish reloading all my songs into iTunes and resetting play counts to zero, having it forget which podcasts I've listened to, etc. etc.
I would prefer if possible to get one "coherent" backup and it appears the problem partition is no longer reliably bootable.

Subject: RE :(forte-users) Web enterprise & user visibleservice Objects

A few months ago we faced a similar problem while migrating from classic
Forte to Web. We had to protect our investment in various frameworks that we
wrote for the classic Forte apps, which made use of extensive
user-level-caching among other things.
We solved the problem using a custom routing mechanism. In brief, we created
several( replicated) server partitions that contains all the user-level
Service objects that existed in the class-Forte apps. Then we wrote a
'custom-router' which mimics Forte load-balanced router( dialog duration =
session ) to intelligently route incoming HTTPRequests to one of these
replicated partitions. The router would look at the some tag on the session
and then route the request to one of these replicated "client clone" using
the tag. Successive requests from the same client will go to the same
replicated partition so that you can use the client-cache or any other
per-user services.
The advantages of this approach are
1) You can continue to make use of caching and other user-level components
that you may have.
2) The web and classic Forte clients can work seamlessly if you write them
to use reference partitions that hosts the other shared( Environment visible
) service objects.
Ofcourse you will have to write ( and maintain )the custom-routing code and
also pay attention to house-keeping. For example, the burdon of cleaning up
the cache on logout or session expiration lies on you. If you don't do this,
then your new user might be looking at an old cache of some other user.
Hope this helps,
Ajith
Forte Systems Consultant.
Subject: (forte-users) Web enterprise & user visible service objects
Hi
We have taken a forte application and converted it to run on the web using
* forte web enterprise &
* fortecgi.exe
In the forte application we have a user visible Local Cache Manager
Service Object (i.e. each users has their own copy) for storing things
like
* the details of the current user id
* the details of the current client chosen
* arrays that are needed by other windows
With web enterprise this service object is no longer user visible, how can
we make it user visible?
Thanks in advance.
Deborah Wallis
dwallisnbs.co.za
WARNING:
Any unauthorised use or interception of this email is illegal. If this email
is not intended for you, you may not copy, distribute nor disclose the
contents to anyone. Save for bona fide company matters, the BoE Group does
not accept any responsibility for the opinions expressed in this email.
For further details please see: http://www.nbs.co.za/emaildisclaim.htm
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

A few months ago we faced a similar problem while migrating from classic
Forte to Web. We had to protect our investment in various frameworks that we
wrote for the classic Forte apps, which made use of extensive
user-level-caching among other things.
We solved the problem using a custom routing mechanism. In brief, we created
several( replicated) server partitions that contains all the user-level
Service objects that existed in the class-Forte apps. Then we wrote a
'custom-router' which mimics Forte load-balanced router( dialog duration =
session ) to intelligently route incoming HTTPRequests to one of these
replicated partitions. The router would look at the some tag on the session
and then route the request to one of these replicated "client clone" using
the tag. Successive requests from the same client will go to the same
replicated partition so that you can use the client-cache or any other
per-user services.
The advantages of this approach are
1) You can continue to make use of caching and other user-level components
that you may have.
2) The web and classic Forte clients can work seamlessly if you write them
to use reference partitions that hosts the other shared( Environment visible
) service objects.
Ofcourse you will have to write ( and maintain )the custom-routing code and
also pay attention to house-keeping. For example, the burdon of cleaning up
the cache on logout or session expiration lies on you. If you don't do this,
then your new user might be looking at an old cache of some other user.
Hope this helps,
Ajith
Forte Systems Consultant.
Subject: (forte-users) Web enterprise & user visible service objects
Hi
We have taken a forte application and converted it to run on the web using
* forte web enterprise &
* fortecgi.exe
In the forte application we have a user visible Local Cache Manager
Service Object (i.e. each users has their own copy) for storing things
like
* the details of the current user id
* the details of the current client chosen
* arrays that are needed by other windows
With web enterprise this service object is no longer user visible, how can
we make it user visible?
Thanks in advance.
Deborah Wallis
dwallisnbs.co.za
WARNING:
Any unauthorised use or interception of this email is illegal. If this email
is not intended for you, you may not copy, distribute nor disclose the
contents to anyone. Save for bona fide company matters, the BoE Group does
not accept any responsibility for the opinions expressed in this email.
For further details please see: http://www.nbs.co.za/emaildisclaim.htm
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

Re: (forte-users) No response from Router partition

Similar Messages

Maybe you are looking for