RE: Full update and init for 2008 differs

Dear All,
I am doing initilization of data for 0fi_ar_4.
When i do the full update for selection as fiscal yr.period =2008001 to 9999012 i get all the data around 33600 records.
When i do the init however it fetches only 89000 records.
I want do init and then trigger delta as a part of process chain.
The inits from 1999 to 2007 all were fine. However for 2008 i am not able to get the entire data for the init..I just tested with full update it works okay for 2008
Kindly advice.
Regards
MAdhuri

If that is the case, just check whether the record count of 89000 belongs to the Year 2008. With the same selection criteria please check how many records you are getting in rsa3 or using se11.
My Understanding of how Init works for a datasource, if you have loaded the data with the Initload for the year 1997 to 2007, the subsequent delta will bring only the record matching the criteria.
When you want to do another init, it will ask you to delete the Init flag and load the data again. Please check this out.
thanks
Analyst

Similar Messages

  • When i try to update my apps from the app store some of the apps wont update and ask for an Apple ID that isn't mine. Whats the problem and how do i fix it?

    When i try to update my apps from the app store some of the apps wont update and ask for an Apple ID that isn't mine. Whats the problem and how do i fix it? All im trying to do is update my apps and its asking for these random apple ID's.

    The apps were purchased by another user with a different Apple ID. You will have to erase them and repurchase them using your Apple ID.

  • I just set an administrators name (my full name) and password for parental controls (using the one I always use) and now after restarting and trying to make changes to aprental controls it does not recognize my password

    I just set an administrators name (my full name) and password for parental controls (using the one I always use) and now after restarting and trying to make changes to aprental controls it does not recognize my password

    Hello, do you have another admin account to log into for a test?

  • Blank screen after full update and reboot

    As it is now, it goes to the point during boot, right before the resolution gets set to the right value, before I get a blank screen (no input to screen).
    I have reinstalled several times, and tried a few different configurations. After all these attempts, I have practically memorized everything. This is what I do:
    Setup is finished, and I reboot the computer.
    # reboot
    The computer reboots and I login to root.
    # pacman -Sy
    # rm -rf /var/run /var/lock; pacman -S filesystem --force
    # pacman -S tzdata
    # pacman -S pacman
    # pacman-key --init; pacman-key --populate archlinux
    I switch to the second terminal (Ctrl + Alt + F2) and create a user
    # useradd bompi
    # passwd bompi
    I write the password. Twice.
    # cd /home
    # mkdir bompi
    # chown bompi bompi
    I then log in and out of the different users and echo random stuff until the key is generated. I then switch back to the first console and say yes to everything the key thing asks.
    At this point, I can reboot just fine. It isn't until the next bit I get trouble.
    # rm /etc/profile.d/locale.sh; pacman -Syu; mkinitcpio -p linux
    Everything completes, no problem. I then reboot (shutdown -r now) and run into the earlier described problem.
    Anyone have any suggestions?
    Last edited by Bompi (2012-06-16 10:43:48)

    I didn't know about the adduser script, but wouldn't the chown command fix the permissions? I did it this way in a virtual machine and got it working pretty good.
    However, I don't think this has anything to do with the issue I am having. The main reason I made the user when I did, was so I had something to do to while the keys got generated. I never used the user except for a quick login to test.

  • Ipod updates and im on a different comp

    i plugged the ipod into the computer and then there was an update for the software on the ipod. i let the software on the ipod update and then it took all of the songs off of the ipod to make way for the new software. now the songs that i had on the ipod were on a different computer and that computer is not working anymore and i wasnt able to transfer the music to the new computer. can anyone help me figure this out. thank you for your time.

    If you installed the new software on your iPod, that (as I believe it warns you) erases everything on your iPod. Once that's done the iPod is blank; no recovery of content is possible. If you can't get the tracks off of your old computer by any means, then you're stuck and will have to reimport your CDs and restore any purchased content from your backups (you did make backups of your iTunes purchases, I hope).
    But did the hard drive in the old computer fail? If not you should be able to remove the hard drive, mount it in an external case, and connect it to your new computer. You should then be able get the tracks into iTunes and then onto your iPod.

  • Caching service only works for OS X updates and not for Apps

    Hello,
    It seems that my OS X Server Caching service only works for Apple OS X Software Updates (in Mac App Store updates, when the icon of Mountain Lion appears). I see it in my logs in verbose mode when I download an Apple OS X Software Updates and not when I download an app in Mac Appstore.
    So I'm sure my Caching service works but not for all downloads.
    Why ? What's wrong with my server ?
    I read in some blogs that Caching Server can work for iOS devices appstore too. I try to download some apps with my iphone but nothing happens in logs ...
    Can somebody help me about the Caching Server ?
    Thank you.

    I am with chugues http://www.apple.com/ios/business/
    Caching Server 2 supports iOS 7.
    By caching purchased content and software updates on a local Mac running OS X Mavericks Server, Caching Server 2 speeds up the download and delivery of content through the App Store, Mac App Store, iTunes Store and iBookstore. Your users get faster downloads of content and updates to their iOS devices directly over your corporate network.
    Shows iOS updates and et al. Why is this feature not on yet?

  • Want to save files, documents, bookmarks, iTunes and iPhoto libraries, each in separate folders to external hard drive prior to full sweep and overwrite for the purpose of full sweep of Macbook?

    Never done this before and cannot find a manual for OS X 10.7.5 Lion. Basically I want to clean my 2009 Macbook6,1 as though I were selling it and start out fresh but before I attempt it I want to stash my contents (Files, Documents, Bookmarks, iTunes and iPhoto libraries to my external Hard Drive, all in separate folders to return them to Macbook after the full sweep and big overwrite. Can anyone help me?

    That may not be the best approach (see below).
    Format the drive for a Mac (see #1 in Using Disk Utility if you're not sure how).
    Create the folders you want on it.
    Open a second Finder window and drag what you want from one to the other.
    If you only copy the stuff listed, you'll lose your AddressBook, Mail, Calendars, preferences, and probably all sorts of other things.
    A better option might be to back up your entire system, either with Time Machine or one of the "cloning" apps.  Then you can restore selectively from TM, or copy selectively from the clone.

  • HT6058 I can't update and download for IOS 7.0.4

    Please advise me for this case, thanks.

    Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
    See the Using iTunes Section Here...
    How to update your iPhone, iPad, or iPod touch
    Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
    iTunes free download from www.itunes.com/download

  • Updates and Hotfixes for DirectAccess 2012 R2 and Windows 8.1

    for some of you who use DirectAccess probably familiar with the following link
    Recommended hotfixes and updates for Windows Server 2012 DirectAccess
    as far as I know and according to TechNet, DirectAccess hasn't change a bit from 2012 to 2012 R2 servers.
    I use DirectAccess on Windows Server 2012 R2 and I'm surprised to see that there is no single update from that list the applicable with either Server 2012 R2.
    if it's true - shouldn't there be a documentation that talks about the differences of the DirectAccess Client\Server from 2012\8 to 2012 R2 \ 8.1?
    I'm asking because I want to make sure those updates are already include or not needed for 2012 R2\8.1 and not "forgotten" or something.
    Tamir Levy

    I was afraid that you'll said that
    I hate to be the annoying guy but take a look at this KB article:
    http://support.microsoft.com/kb/2787534
    Applied to: Windows 8\2012,
    Doesn't Apply to: Windows 8.1\2012 R2
    and - for a fact, doesn't include in Windows 8.1\2012 R2 as this bug still exists in those operating systems.
    another annoying fact - No other update was released for these version yet.
    this example approves that not every hotfix \ updates that was released for 8\2012 before 8.1\2012 R2, is already included in 8.1\2012 R2
    and allow me to add another fact.
    when you configure DirectAccess via the remote access wizard it creates a WMI query called
    DirectAccess - Laptop Only WMI Filter.
    after you create it in Windows Server 2012 R2 - look at the WMI Query and you'll see that by default it doesn't apply to version 6.3! the version for Windows 8.1.
    if you want to add the support for Windows 8.1 you have to modify manually the query which is of course, not supported by Microsoft.
    That is just another symptom that makes me wonder if Microsoft did ANY change or update to DirectAccess 2012 R2
    Tamir Levy

  • Record count is different for Full load and Init with data transfer

    Hi all,
    We have a data source for which delta is enabled on Calendar Day.
    If I run the full load record count is 2670.But If I run the delta record count is 2665.5 records are missing.
    Would you please help on this.Why those records are missing.

    Hi,
    Actually for Full Load say you have 50 records. When you run it will upload 50 records.
    Now if you run delta if there is no records changes it wouldnt update because there is no update in the existing records.
    only delta is done when there is changes in the records.

  • I recently installed the latest security updates on my IMAC running 10.9.5. Since then the mail client cannot download email anymore, neither Apple Mail nor Thunderbird works. It always comes back and asks for a different password.

    The ISP tells me that this is a known problem with the latest MacOS updates.

    OS X Mail: Troubleshooting sending and receiving email messages

  • Import update and init.xml

    After deleting all the user's from debug page, when should we import init and update.xml files from sample folder.?

    If that is the case, just check whether the record count of 89000 belongs to the Year 2008. With the same selection criteria please check how many records you are getting in rsa3 or using se11.
    My Understanding of how Init works for a datasource, if you have loaded the data with the Initload for the year 1997 to 2007, the subsequent delta will bring only the record matching the criteria.
    When you want to do another init, it will ask you to delete the Init flag and load the data again. Please check this out.
    thanks
    Analyst

  • How to Manually Perform software Updates and tips for making Macbook better

    Hi. So recently my internet was really slow. I figured the problem out and now is working well. Although the youtube site does not allow me to view entire videos.
    Well...i was told that since my macbook is turned off at night, it cant perform software updates between 3am-6am...so how can i do these manually? or how can i change the update time to sometime in the evening?
    I heard these software updates are suppose to make the macbook run and perform better. what other things can i do to accomplish that?
    (Laymans terms, im new to the mac world)

    Select Software Update from the Apple menu. Or download the standalone updaters from Apple's download site - http://www.apple.com/support/downloads/. Or simply set the Check for Updates option in Software Update to whatever frequency you prefer. SU will notify you when updates are available.
    Why reward points?(Quoted from Discussions Terms of Use.)
    The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
    Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

  • Will Verizon offer any thing to iPhone 4 users since Apple will stop releasing update and support for the device?

    Apple recent stated they will no longer offer any support for the iPhone 4, no more updates, apps will stop working with the advancement of software updates. over all by the end of the year the phone will be almost completely phased out. Does Verizon have any type of plan for their current iphone 4 device users?

    Verizon has nothing to do with Apple updates.
    It is much like Microsoft who phased out support updates to Win 31, Windows 95,98,ME and now Windows XP.
    You must deal with Apple http://www.apple.com/support
    Good Luck

  • Firefox 29 constantly updates and prompts for a system reboot

    This issue persists even after uninstalling and reinstalling the latest version, 31. This has occurred on several different machines I support, and as far as I can tell most of them have no extensions that could be causing the issue.

    Try to run the Firefox program once as Administrator (right-click: Run as Administrator).
    Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
    *Download the full Firefox installer and save the file to the desktop<br>https://www.mozilla.org/en-US/firefox/all.html
    If possible uninstall your current Firefox version to cleanup the Windows registry and settings in security software.
    *Do NOT remove "personal data" when you uninstall your current Firefox version, because this will remove all profile folders and you lose personal data like bookmarks and passwords including data in profiles created by other Firefox versions.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    *(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
    *(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
    *It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    *http://kb.mozillazine.org/Uninstalling_Firefox
    Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Maybe you are looking for