Re:getting is error  query desigher

Dear expert
i getting is error  query desigher
Diagnosis
You have attempted to open query 0VENDOR from the Query Designer. However, this query does not exist in the database in the system to which you have made a connection.
System Response
Opening the query was terminated.
Procedure
Make sure that you have connected to the correct BW system. Note: The query may have been deleted by another user.
regards
pradeep

Hi Pradeep,
Look like some one deleted the Query, May be by mistake. Check the possiable ways..Insted of  Executing  it by technical name..Go to the data target and see if its still exists. Form there you wil be able to sort the issue ...
NB: Jai mam ...By the way BI content queries start with Zero ( Vendors: Overview  : 0FIAP_C02_Q0001 ),
And would request you  to be Polite to ppl on the form...because every one have there own way of expressing there question...Thanks for you'r support tho.

Similar Messages

  • Performance Dialogue error - Query "Status Overview is already open in ano

    Hi All,
    We implemented ESS MSS on Portal 7.01 SP8. With With SAP_ESS 603 SP7 and BP_ERP5ESS 1.41 SP9
    This is for country Qatar and it has made as a copy of GB as SAP doesnt provide any country structure for Qatar.
    We are facing error in Performance Dialog saying "Query "Status Overview is already open in another session" when click / display button is clicked after selecting the Appriasal document in ESS.
    This is working fine for all other countries and also this works fine if another country's portal role is assigned to same PRNR or test user.
    We cant see any locks in backend / portal.
    Please can someone help.

    Hi Siddharth,
    We have already checked and there were/are no locks in Sm12.
    I tried deleting the locks using the mentioned program, in result is does say that ! query found but when I go to Portal and open the Performance Dialogue document , I still get the error Query " " is already open in another session
    Note 1432358 is for  SAP_BASIS >= 701 which is suitable for our case but, just wanted to check, Performance dialogue works fine for all other countries and only for this particular country it's not working.
    We are able to replicate this in Development and Test, both the environments.
    Also, when this particular user is assigned, another country's portal roles the problem doesnt occur.
    Any clues?

  • Can't get IVI Power Meter error query to work properly.

    I have been trying to use the IviPwrMeter Error-Query.vi to read possible errors coming from the Power Meter.  However, I have found that no errors can be detected using this vi.  This is because the returned value 'status' is wired over to the 'error code' input of 'IviPwrMeter Error Converter.vi' and the status value will always be equal to VI_SUCCESS as the attached code signifies.
    All of this code was generated by either LabWindows/CVI and/or LabView.
    If I wire the error code output of 'IviPwrMeter_error_query' function to the error code input of 'IviPwrMeter IVI error converter.vi', the errors on the Power Meter is at least detected.
    Am I doing something wrong here or are there other work arounds?
    Source listing of driver call:
    ViStatus _VI_FUNC age4418b_error_query (ViSession vi, ViInt32 *errCode,
                                            ViChar errMessage[])
        ViStatus    error = VI_SUCCESS;
        checkErr( Ivi_LockSession (vi, VI_NULL));
        if (errCode == VI_NULL)
            viCheckParm( IVI_ERROR_INVALID_PARAMETER, 2, "Null address for Error Code");
        if (errMessage == VI_NULL)
            viCheckParm( IVI_ERROR_INVALID_PARAMETER, 3, "Null address for Error Message");
     if (!Ivi_Simulating(vi))                /* call only when locked */
         ViSession   io = Ivi_IOSession(vi); /* call only when locked */
         checkErr( Ivi_SetNeedToCheckStatus (vi, VI_TRUE));
         viCheckErr( viPrintf(io, "YST:ERR?"));
      viCheckErr( viScanf (io, "%ld,\"%256[^\"]", errCode, errMessage));
     else
             /* Simulate Error Query */
         *errCode = 0;
         strcpy (errMessage, "No error.");
    Error:
        Ivi_UnlockSession(vi, VI_NULL);
        return error;

    Dennis,
    I get the same results as you if I don't have a power meter connected.  However, this doesn't supprise me because the session handle is probably checked at a higher level.
    The calling hiearchy is as follows (I think, because I don't have all of the code)  IviPwrMeter Error Query.vi -> IviPwrMeter_error_query (IviPwrMeter.dll) ->age4418b_error_query (age4418b.dll).  I would guess that the session is validated in the second layer and not the bottom layer where the actual instrument error query is happening.
    Something you may try.  If you have any instrument, write a simple program to get a valid handle then call the error query using the error cluster to link them together.  Set a breakpoint before the error query, run the program, use MAX to send an invalid command and create an error.  Then resume your original program and see if an error is reported in the error cluster after executing the IVI error query.
    Bob

  • While executing the query getting an error u2018Page Not Foundu2019 in the bowser.

    Hello,
    I opened a Bex Query in Query Analyzer and clicked on the Execute button to execute the query in our portal site. But I am getting an error u2018Page Not Foundu2019 in the bowser.
    As I am new to BI,Kindly guide me through the steps.
    what all setting needs to be done?
    Regards,
    Rachel

    Hi,
    The Path is C:\WINDOWS\system32\drivers\etc\hosts
    You need to update "host file" in your server/in your PC. So ask Network people to do it and also you need to change your browser LANsettings.
    Eg:   11.11.8.161     BWQ1     BWQ1.***.com
    Like above you need to change in your host file.
    Thanks
    Reddy
    Edited by: Surendra Reddy on Nov 27, 2008 8:12 AM

  • Getting ORA Error while running any Query

    Hi Experts - I am getting below error message for any query i run in Webi. Please help.
    failed to execute with the error ORA-00604: error occurred at recursive SQL level 1
    ORA-01655: unable to extend cluster SYS.C_OBJ#_INTCOL# by 128 in tablespace. (WIS 10901)

    Hello communutiy, hello rohan,
    after updating patches next working day we also get this erreor message
    "ORA-00604: error occurred at recursive SQL level 1 ORA-01655: unable to extend cluster SYS.C_OBJ#_INTCOL# by 128 in tablespace"
    What have you done so far. Could you solve this issue? If yes how?
    Best regards Harry

  • Getting an error when i am execution a BI query using ABAP.

    Hi Expert,
    I am getting an error when i am execution a BI query using ABAP. Its Giving me this Error "The Info Provider properties for GHRGPDM12 are not the same as the system default" and in the error analysis it saying as bellow.
    Property Data Integrity has been set differently to the system default.
    Current setting: 0 for GHRGPDM12
    System default: u2019 7 u2018
    As I am very new to BI and have very limited knowledge, so I am not able to understand this problem. Can any one help me to resolving this issue. Previously it as working fine, I am getting this error last 2 days.
    when i am debugging , I am getting error from
    create instance of cl_rsr_request
    CREATE OBJECT r_request
    EXPORTING
    i_genuniid = p_genuniid.
    this FM. Its not able to create the object. Can any one please help me out.
    Thanks in advance.
    Regards
    Satrajit

    Hi,
    I am able to solve this problem
    Regards
    Satrajit

  • Getting below error while opening query in bex  3.5x

    Dear Guru's
    I am getting below error while opening query in bex  3.5x
    The following object were not found when accesing the server .
    Press repair to correct the problem (included parts of query deleted) press cancel to undo the last action.
    Regards
    Karan

    Hi,
    1) When a query administrator with the sufficient authorization (sap_all or the * authorization for the field in the authorization object) is creating the query in query designer including the 'attributes' which are not visible with the 'normal' authorizations, the query will not list the columns in the output when it is executed by the normal user.
    2) so create an authorization object for each of these attributes with * (full authorization)
    Regards,
    Marasa.

  • Getting Brain Error while saving the query--Need Immediate solution

    Hello Experte
    I designed query like this.
    G/L account structure is defined in Rows. Before explaining about columns Let me Explain u about my ORG structure.
    Company codes are defined in R/3 like this.
    Company Code
    1000 for Local Currency(HSL01)
    2000 to 7000,IEL for group Currency(KSL01).
    Iu2019m extracting the data as it is from R/3 to DSO and again by writing routine I splitter the data for months(EX: HSL01 is ApriL,Hsl02 May,u2026u2026u2026u2026u2026u2026.KSL01 April, KSL02 may,u2026u2026u2026. Upto to 16 periods) this is R/3 data. This data I differentiated based upon currency types. If currency type is 10 then Local Currency 30 Means Group Currency.
    Again Iu2019m receiving the data from Flat Files for subsidiaries(IEAI,IEG,IEEL,ISSCI,IHAL,TTM-US,TTM-INDIA,TTIT). This data I loaded first into DSO by writing Routine at field Level for G/L account to convert G/L Descriptions into Numbers.
    After that I loaded data from first DSO to Second DSO by writing to convert respective currencies into INR and again loaded to cube by Direct mapping.
    Again Iu2019m receiving the eliminations data from R/3 through Ztable. This also Iu2019m extracting from R/3  and loaded into dso and again into cube.
    Now I will Explain about my Report.
    In Columns I defined 3 selections for each month.  U can observe that in Document. Like that for each month Iu2019m getting three selections and for subsidiaries 2 selections for each month. If we observe total Iu2019m getting 13 selections for India and 9 selections for each subsidiary. If subsidiaries increase I need to increase selections, automatically columns will increase. Now for Q4 2 new subsidiaries are  added I need to added. After adding and while saving the query then only Iu2019m getting brain error.
    Could any one sort out this.
    Thanks,
    Sony

    HI Ravi,
    Thanks for the reply.
    While saving the query in BEX i'm getting this error.
    Diagnosis
    Query ZQ3_MISGRPSUMMARYREPORT_010209 contains 8192 differing selection cells. However, only 8191 selection cells can be processed in a query.
    Procedure
    Please simplify query definition ZQ3_MISGRPSUMMARYREPORT_010209.
    This was the error i'm getting. How to simplify this....
    Any answers please.
    Thanks,
    Sony

  • Getting an error when i am execution an BI query

    Hi Expert,
    I am getting an error when i am execution an BI query using ABAP. Its Giving me this Error  "The Info Provider properties for GHRGPDM12 are not the same as the system default" and in the error analysis it saying  as bellow.
    Property Data Integrity has been set differently to the system default.
    Current setting: 0 for GHRGPDM12
    System default: u2019 7  u2018
    As I am very new to BI and have very limited knowledge, so I am not able to understand this problem. Can any one help me to resolving this issue. Previously it as working fine, I am getting this error last 2 days.
    when i am debugging , I am getting error from
    create instance of cl_rsr_request
      CREATE OBJECT r_request
        EXPORTING
          i_genuniid = p_genuniid.
    this FM. Its not able to create the object. Can any one please help me out.
    Regards
    Satrajit

    Hi,
    I am able to solve this problem
    Regards
    Satrajit

  • Getting an error when query is executed

    Hi,
       I have created a query in designer.
    When i Execute the query i am getting an error like this:
    "Warning your user master record is not sufficiently maintained for object 0VENDOR"
    I have this Vendor in the dimentions but i did not use this in any Rows but still i am getting it.
    what might be the cause.
    And also people i am new to this forum, can any one tell me how to give the points for correct answers.
    I really appreciate your patients.
    Regards,
    Pallavi

    Hi,
    Welcome to SDN.
    Please check wheather you are using any navigaional attributes of 0VENDOR in the query. Try to load the master data of 0VENDOR, run the attribute change run and excute the query.
    To assign points you can able to see some colours for every answer, depending upon the answer how it helps you can check the radio button
    Cheers,
    Malli.

  • URGENT : GETTING AN ERROR WHEN I AM QUERYING A BUILDING BLOCK

    I logged into Oracle Forms Runtime. When I Queried a particular building block, I am getting an error:
    "FRM-40735: POST-QUERY trigger raised unhandled exception ORA-04068"
    What could be the reason for getting this error ?
    Thanks,
    JK

    Hi,
    I am able to solve this problem
    Regards
    Satrajit

  • Getting an error outputting query from function

    I have a pretty complex query to do pivoting in Apex... Application Express 4.0.2.00.06... Oracle 10gR2
    It works.. but as I add more text... I get an error
    Flow=103 page=22 ORA-20001: wwv_flow_flash_chart.func_ret_sql_qry_err
    I think there is a maximum character count on this... can someone give me heads up?

    Hi,
    Welcome to SDN.
    Please check wheather you are using any navigaional attributes of 0VENDOR in the query. Try to load the master data of 0VENDOR, run the attribute change run and excute the query.
    To assign points you can able to see some colours for every answer, depending upon the answer how it helps you can check the radio button
    Cheers,
    Malli.

  • How to get logging sql query error

    Hi,
    I want to create some constraints and indexes on tables on a particular schema and I have the script to build the indexes and constraints.
    But I want to get the errors that should be logged on some file during indexes and constraints creation.
    Pls help me...
    Thanks in advance..

    If you are running the script via SQLPlus then just add a "spool filename" to the beginning of the script and a "spool off" at the end so that query results are written to the file. Also you probably want to "set echo on" at the beginning so that the SQL statements are written to the file also.
    See the SQLPLus Users Guide for the set command and spool.
    HTH -- Mark D Powell --

  • Why Do I get an Error When I Query?

    Hi
    When I search for messages on an empty folder
    ie: GWFolderObj.messages.Find(p_strQuery)
    I Get this Error, but ONLY when the folder is empty...
    A first chance exception of type
    'System.Runtime.InteropServices.COMException' occurred in
    Microsoft.VisualBasic.dll
    Any ideas as to why??
    Thanks,
    A.

    That's the truth. I get the same error when I log in
    (and it's on my Mac computers!!).
    Thanks for sharing! I was beginning to feel paranoid and think it was a Windows XP thing...

  • While running a report through workspace getting "Null" error

    While running a report through workspace i am getting "Null" error.i have checekd the db connection and also access to hfm.
    Thanks

    Hi Raj,
    There are a few OSS Notes for your issue.
    If your Query has hierarchy in it then check 734184
    If your query is based on Infoset then check Note 784502 and 701941.
    Also check 668921.
    Bye
    Dinesh

Maybe you are looking for