Re: Getting OC mode to work

Board: MSI X99s Gaming 7
Bios: Version H.A
VGA: MSI GTX980Ti Gaming
PSU: Corsair AX760i
Intel Core i7 5820k
MEM: G.Skill 3000 4x4gb F4-3000C15Q-16GRR
HDD: Samsung 850 Evo 500gb
COOLER: Corsair H110i GT
OS: Windows 8.1 64bit Professional

QuoteI've used the 4.0.0.08
there is 4.0.0.9:
http://www.msi.com/support/mb/X99S-GAMING-7.html#down-utility&Win8.1 64
Quote but this thing with OC genie happens even when I turn it on in the bios, the pc reboots and then I get this black sc...

Similar Messages

HP Phoenix 8-core - how do I get XP Mode to work in Windows 7 64-bit?

My Computer: HP Phoenix 8-core, 12 GB Ram, over 1,000GB hard drive space, Win 7 SP1 with current updates. Downloaded and installed the following: Windows XP Mode with Windows Virtual PC, the hotfix MS provided for AMD multicore, and the MS Hardware-Assisted Virtualization Detection Tool which informed me that my computer does have hardware-assisted virtualization. I have done EVERYTHING Microsoft has advised.
How do I get XP Mode to work?

Frank, thanks for the help. That Microsoft article is the one I read yesterday morning. I again just now went into the BIOS as follows: Security, System Security-Data Execution Prevention AND Virtualization Technology were both enabled. So I saved changes and exited. My computer is running Windows 7 Professional 64-bit.
This is my system information:
OS Name   Microsoft Windows 7 Professional
Version   6.1.7601 Service Pack 1 Build 7601
Other OS Description    Not Available
OS Manufacturer   Microsoft Corporation
System Name   HPPHOENIX
System Manufacturer   Hewlett-Packard
System Model   h9-1100z
System Type   x64-based PC
Processor   AMD FX(tm)-8150 Eight-Core Processor, 3600 Mhz, 4 Core(s), 8 Logical Processor(s)
BIOS Version/Date   AMI Ang_716, 4/5/2012
SMBIOS Version   2.7
Windows Directory   C:\Windows
System Directory   C:\Windows\system32
Boot Device   \Device\HarddiskVolume1
Locale   United States
Hardware Abstraction Layer   Version = "6.1.7601.17514"
User Name   HPPHOENIX\Debbie
Time Zone   Eastern Daylight Time
Installed Physical Memory (RAM)   12.0 GB
Total Physical Memory   11.8 GB
Available Physical Memory   10.2 GB
Total Virtual Memory   23.6 GB
Available Virtual Memory   21.7 GB
Page File Space   11.8 GB
Page File   C:\pagefile.sys
I downloaded and installed the Windows XP Mode. The
I downloaded and installed the Windows Virtual PC. (not the 2007 version-tried that the first time and seen it did not work).
I applied the "fix" for AMD motherboards.
I just tried to install XP Mode again--I got almost to the end, the I got the following error message in a rectangle box:
"Windows XP Mode-Windows Virtual PC
Could not complete Setup. Please try again."
The has happened over 7 times. Yesterday evening before I posted on this forum, I uninstalled, deleted everything, restarting the computer after doing each step, went to website yet again, redownloaded everything again, and tried to install once again. Still the same message. Any help or advice is certainly needed and appreciated. Debbie

Cant get Security Mode to work on WRT54G

I have everything set up fine.. internet working etc but I cannot get security mode to work.. I go to click on WEP, WPA.. whatever and it just autos back to DISABLED.. Anyone to fix this?

how many computers do you have?
try to use other computers in setting up the security. check also the firmware of your router.make sure you have the latest one.

Can't get 'clamshell' mode to work with Dell 2408

I have been trying to get my Dell 2408 working in clamshell mode without any success. I have a USB keyboard, USB mouse, power adapter and monitor via DVI plugged in. I switch the display type to mirror, close the lid, wait for it to sleep, then wake it again by pressing a key on the keyboard.
The computer wakes, the external monitor flashes but at the incorrect resolution (1200 X 800 instead of 1920 X 1200) then goes back to sleep. This will repeat over and over again until I open the lid of the macbook. I can occasionally get the macbook to wake and display on the eternal monitor but this is very rare, and when it does I get some wired artifacts.
What's really puzzling is that the monitor works flawlessly in extended desktop mode, and works perfectly with other non mac computers. I took the macbook to the Genius Bar, hooked it up to the apple cinema displays and i didn't get the same problem! Grrr....
So I just don't get it, both the computer and display seemingly work fine independently from one another, work fine in extended mode, yet in clamshell mode have some fairly major issues.
Anyone have any ideas?

My dell 2408 arrived today and I'm having exactly the same problem.I cant get it to go into clamshell mode. I lie, I got it to go into clamshell mode once. I don't know what I did. But it certainly isn't willing to go into clamshell mode again any time soon.

Can't get clamshell mode to work with my moniter

I can't get my Air to work in clamshell with my HP moniter

My dell 2408 arrived today and I'm having exactly the same problem.I cant get it to go into clamshell mode. I lie, I got it to go into clamshell mode once. I don't know what I did. But it certainly isn't willing to go into clamshell mode again any time soon.

How do I to Get HiDPI Mode To Work?

I've downloaded Quartz Debug, and I enabled HiDPI display modes and then logged out as it said I needed to. I log back in and HiDPI mode isn't enabled both in Quartz Debug (After Resume) as well as in Display System Preferences. I've tried disabling Resume, quitting Quartz Debug before logging out, restarting my computer instead of logging out, and any combination of those attempts to get HiDPI working.

Hi
No - iDVD 4 will not work under Mac OS X.5
• Program miss-match. iDVD 5.0.2, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK - DON’T work under Leopard
• Program miss-match. iDVD 6.0.4, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• Program miss-match. iDVD’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (will work under Leopard)
So I do (if I needed it) use an external hard disk
• Boot-able (able to start from) Has to be FireWire (WesternDigital My Book serie do not work! )
and - has to be Mac OS Extended formatted - Even if bought at Appled Store is not 100%
• On this I would install Mac OS X.3.9 AND iDVD 4
• When needed I would start from this and do My DVDs
OR
Upgrade to iLife'09 and use iDVD'09 (version 7.0.4)
Yours Bengt W

How to get landscape mode to work?

My landscape mode won't work. It was working fine before, and all of a sudden I can't get it to work now. My phone is only a week old!

Reset it, hold down the home and sleep buttons, ignore the red Off slider, wait for the Apple logo and let go of the buttons. Before you do this, is the lock screen icon showing on the top right of the iPhone?

Can't get Transport Mode to Work

Just messing around in a lab with a few routers. Trying to bring up transport mode first on an IPSEC tunnel. All seems correct, but it constantly comes up in Tunnel Mode. I can't see why?
Can anyone see anything obvious?
Enclosed are configs and a WireShark capture of the output - as you can see it's Tunnel Mode - and not Transport.
The output of "show crypto ipsec sa" demonstrates the fact that its Tunnel mode.

Thanks for the reply Rick.
The access list is a catch-all :-
access-list 100 permit ip any any
It's a strange one to grasp really.
"traffic to be protected has the same IP addresses as the IPSec peers "
My routers are peers - 192.168.1.1 & 192.168.1.2
If i ping from .1 to .2, or .2 to .1, in my mind this represented "the same IP addresses as the IPSEC peers". Other than the ping, i don't know how i can simulate peer traffic that would come up in transport mode. Do you?
Once the IPSEC link is built, and it's a tunnel link, i don't think it will ever divert away from this and create a separate transport mode link, so all traffic will ride across it.
It's not a big deal i suppose. Router to router connections don't seem to support transport mode.
I know how the packets would look like, which is the most important thing really. The headers are just in different positions.
Thanks again for taking the time to answer Rick.

Can't get clamshell mode to work

I would like to use an A1081 HD cinema display with my macbook pro and I have connected it to the HDMI port. I have attached an external keyboard and a mouse in one of the USB slots on the keyboard. I set it to mirror display, but evey time I close the lid it goes to sleep and I can't wake it up with keyboard or mouse.
Have I forgotten anything?

Thanks for the info, but could you tell me why you think it will work and is it the only USB peripheral device that can be used for this?

Trouble getting WDS Mode to work between 2 RG54G2s

Hi,
I have bought two RG54G2s and am trying to use them to wirelessly bridge 2 wired LANs in my home. (Upstairs & Downstairs)
I am not getting connectivity between the two routers however.
I have read the manual and the article in the FAQ and I *thought* I had it all set up correctly.
Each device has 'Wireless Bridge' & 'Enable WDS Only' options ticked. The MAC address of the 'other' router is also set in each.
The SSIDs are different, the radio channel is the same and there is no security of any kind on the link to cause troubles.
Each router has one test PC connected by Ethernet. Each PC can ping its own router but not the other one.
One router has an ethernet connection from the WAN socket to my network switch. There's no problem with connectivity there.
I wonder if the IP addresses and subnet mask are the problem.
Here's my setup:
Router A = 192.168.1.5 client PC is 192.168.1.100
Router B = 192.168.1.6 client PC is 192.168.1.200
Subnet mask for both is 255255.255.0
I have read through the MSI forum and googled for tips on setting up WDS but cannot find anything 'wrong' in my setup.
What could be wrong? How to determine the actual problem and fix it?
Thanks
Peter

I have the same problem tried varoius configuration but nothing, have you solved your problem? how??

Clamshell Mode Not Working With Acer V223W

I recently got an Acer V223W 22" monitor to use at the office with my MBP. Using the DVI port, it works well, but I cannot get clamshell mode to work. I close the lid, and when I awaken the computer with a mouse click, I know it wakes up because I can hear the audio, but the Acer display does not light up.
Any suggestions as to how to fix this are welcome!

This may be relevant: 2011 MacBook Pro Repair Extension Program for Video Issues.

When I switch my time capsule to 5.0ghz mode the range of my wireless network drops significantly. Near the Time Capsule my Macbook Pro works fine, in my bedroom I have almost no signal. In mixed mode it works fine. Any ideas on how to get 5.0 working?

When I switch my time capsule to 5.0ghz mode the range of my wireless network drops significantly. Near the Time Capsule my Macbook Pro works fine, in my bedroom I have almost no signal. In mixed mode it works fine both placed. Any ideas on how to get 5.0 working? I thought 5.0Ghz was supposed to have a wider range. Do I need to change a setting on the Macbook Pro?
Thanks, W

I'm not sure if you understand that 5 GHz has some upsides, but also some very significant downsides.
The upside is that the 5 GHz signal will allow faster speeds.
The downside is that you must always give up something in order to gain something else.Unfortunately, the marketing hype about 5 GHz does not go into very many details about this.
In the case of 5 GHz, the 5 GHz signals are much weaker than 2.4 GHz signals, so they do not travel as far or penetrate any obstructions like walls or ceilings nearly as well as 2.4 GHz signals. In many cases, in order to get good 5 Ghz performance, you literally have to have almost a line-of-sight relationship between your computer and the wireless router.
If you have a new dual band router, which broadcasts both a 2.4 GHz and 5 GHz signal simutaneously, your Mac will connect to the best signal quality automatically depending on its location in relation to the router. In the same room, without any obstructions, it will connec to 5 GHz. But, take the laptop down the hall a few rooms and around the corner and the Mac will connect to the 2.4 GHz signal because at that location, the 2.4 GHz signal is not only stronger, it is also faster.

HT201413 I have restored and updated my ipod from recovery mode however I still have the usb cord and itunes icon on the ipod when it is switched on. How can I get my ipod to work again?

I have restored and updated my ipod from recovery mode, however I still have the usb cord and itunes icon on the ipod when it is switched on. How can I get my ipod to work again? I have updated and restored 5 times! When connected to itunes it only shows the summary page saying ipod in recovery mode.

Fixed it!
1. Made sure itunes software was up to date
2. Pressed and held 'home' button and 'on-off' button at the same time for about 10 seconds till ipod reset (I hadn't done this step previously)
3. Connected to itunes
4. Pressed restore and update ipod
Update successful and ipod taken out of recovery mode

Iphone has been in recovery mode for 4 hours and hasn't come back to the home screen and how can i fix this and get it back to working order?

iphone has been in recovery mode for 4 hours and hasn't come back to the home screen and how can i fix this and get it back to working order?
the iphone 4S has been in recovery mode for a long time and i have tried to press and hold the power and home buttons until the apple symbols comes on the screen again but it stay on the screen until the screen turns off and doesn't come back on to the home screen and have tried to sync with mac and doesn't do anything it does display the itunes and cable icons for a while but then goes back to the apple symbol and doers nothing what can I do to fix this and not loose what is on the phone at all?

Hi, simonRM.
Thank you for visiting Apple Support Communities.
I understand that you are unable to restore your iPhone. Here are the best troubleshooting resources to start with when not being able to update or restore your iPhone.
If you can't update or restore your iPhone, iPad, or iPod touch
Resolve iOS update and restore errors in iTunes
-Jason H.

Can't get my TC to work in Bridge mode...

I installed Time Capsule TC to my exsisting network, that has a Linksys router. Can't get my TC to work in Bridge mode. Suggestions?
I have the TC directly connected to the router and want to use the TC for wireless Time Machine back ups and to share other hardrives via
the network. I also have an old airport express for airplay speakers in one room. And an airport extreme that I thought I had set up to extend
the network wirelessly. I have yet to find a concise and clear list of steps to make this happen.
Any help would be appreciated.
Holly

The problem is the steps changed with the new airport utility..
I can tell you the steps on a 5.x utility. If you run Lion then download the real tool.
http://support.apple.com/kb/DL1482
Go to manual setup.. internet tab.. connection sharing.. select off, bridge mode.. update the TC..
Wasn't too hard was it.

Re: Getting OC mode to work

Similar Messages

Maybe you are looking for