RE: GPU disabled with NVidia 8800GTX, 2 weeks and no fix yet!

Hi folks
My hard drive crashed while back...had to reinstall everything. Now, for some reason Photoshop refuses to enable OpenGL access even though before I was able to use Photoshop with my video cards. I have reinstalled the app multiple times, reset prefs many times, installed various versions of my video card drivers (including the latest from NVidia) but no luck. I checked Adobe and NVidia site and my cards are listed as supported. I talked to Alienware and they couldn't figure out the problem, I talked to NVidia and they said my cards are ok and it's Photoshop's end.  I posted the problem originally and someone from Adobe said it is NVidia's problem.
Someone please help!  I keep getting passed from one company to another and no one seems to know what is going on.  As I said before, Photoshop CS5 was working fine with my video cards before (with GPU enabled).  After I had to swap my HD's, Photoshop refuses to enable GPU access.
Here are my specs:
Alienware m17x R1 laptop
Intel GM965 motherboard
Windows Vista 32
2x NVidia Geforce 8800 GTX (have a gig memory each, not running SLI)
4 Gigs of RAM
2x 500 Gig WD drives (RAID 0)
Wacom Cintiq as second display
I know my OpenGL works because I am able to run Modo fine. I checked in Device Manager and all seems ok.
Currently I am running version 12.1 of Photoshop.  I have work piling up but can't seem to enable Photoshop's GPU features as I do 3D work.
This is what shows in my System Information in Photoshop:
Adobe Photoshop Version: 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch]) x32
Operating System: Windows Vista 32-bit
Version: 6.0 Service Pack 2
System architecture: Intel CPU Family:6, Model:7, Stepping:6 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1
Physical processor count: 2
Processor speed: 2793 MHz
Built-in memory: 2046 MB
Free memory: 729 MB
Memory available to Photoshop: 1646 MB
Memory used by Photoshop: 70 %
Image tile size: 128K
Image cache levels: 4
Display: 2
Display Bounds:=  top: 0, left: -1600, bottom: 1200, right: 0
Display: 1
Display Bounds:=  top: 0, left: 0, bottom: 1200, right: 1920
Video Card Number: 1
Video Card: NVIDIA GeForce 8800M GTX
Driver Version: 7.15.11.7482
Driver Date: 20080329113400.000000-000
Video Card Driver: nvd3dum.dll,nvwgf2um.dll
Video Mode: 1920 x 1200 x 4294967296 colors
Video Card Caption: NVIDIA GeForce 8800M GTX
Video Card Memory: 0 MB
Video Card Number: 1
Video Card: NVIDIA GeForce 8800M GTX
Driver Version: 7.15.11.7482
Driver Date: 20080329113400.000000-000
Video Card Driver: nvd3dum.dll,nvwgf2um.dll
Video Mode: 1920 x 1200 x 4294967296 colors
Video Card Caption: NVIDIA GeForce 8800M GTX
Video Card Memory: 0 MB
Serial number: 95458707258873191941
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS5.1\
Temporary file path: C:\Users\Arash\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
  C:\, 931.5G, 766.1G free
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS5.1\Plug-ins\
Additional Plug-ins folder: not set
I am at my wit's end!

Ok folks...I solved the problem.  I basically reinstalled from scratch: wipe the drive, reinstall OS and driver.  Now, at first I installed the OEM driver for my video cards and that again didn't work.  So, I again installed the latest driver right on top of the old (yup, didn't bother to uninstall the older one) and that still didn't work.  Then I started to mess around with PhysX and GPU setting in the driver controls.  Under PhysX menu it has an option of allowing me to force one of my video cards to run PhyX or allow the driver to decide what to use.  I had fiddled around with this option before, but for some reason didn't seem to work before.  Anyhow, I decided to pick one of my cards from the  drop down menu (I think the first one...am not am my machine now).  Surprise...Photoshop enables the GPU options.  I couldn't believe it. 
Still a mystery to me: why did my OEM driver work on my old HD but not on my new one?  Why couldn't the old drive figure out how to use the GPU so Photoshop is able to see it, even before my HD crash all worked fine?  I don't know why the NVidia tech person couldn't point me to the menu that controls PhyX.
Anyhow,  suffice to say I got it working and installed all my apps and will be using Acronis to back up my system onto another drive: a clone of my HD.
Thanks for suggestions folks.  I wish it hadn't taked so long to solve it.....but at the end of the day the solution was: Reinstall everything again.

Similar Messages

  • Missing GPU Acceleration With NVIDIA Quadro 4000

    Hi -
    I have a PC running Windows 7 with an NVIDIA Quadro 4000 card and 16GB of RAM. I have both Premiere Pro CS6 v6.0.5 and Premiere Pro CC v7.2.2 (just installed).
    When I create a new project in CC, my only option under Video Rendering and Playback is Mercury Playback Engine Software Only. However, when I open a project in CS6, I get that option and also Mercury Playback Engine GPU Accelerated (CUDA).
    Any thoughts on why the GPU option would not be available to me in CC?
    Ed

    Hi Mesmer3001,
    I will suggest you to do a clean uninstall of all NVidia drivers and then re-install the latest one from the NVidia website. So, please follow the steps mentioned below.
    Go to Device manager, right click on the graphivs card and select update driver software.
    Select Browse my computer for driver software option.
    Then on next screen choose Let me pick from a list option
    Choose standard VGA graphics adapter which will choose VGA mode for your machine.
    Then go to Control Panel and uninstall all the NVidia drivers. Restart the machine once it is done. Then go to the below link and re-install the Drivers again.
    Hope it helps and please update if you need further assistance.
    http://www.nvidia.com/Download/index.aspx?lang=en-us
    Regards,
    Vinay

  • I have been using extensions with V8 for several weeks and with last Firefox update this morning all are gone and I can't get them going again!

    I installed V8.0.1 several weeks ago (or what I thought was V8.0.1) and got Awesome Screenshot (A.S.). Although it was stated that AS was not compatible with V8.0.1 I installed it any way and it worked. I have been using it every day until this morning. Another Firefox update came down this morning. Although I clicked the “Update Later” box, it updated at that time anyway. (This has happened every time I received an update in the past and clicked “Update Later” box, but that another problem; not the issue today.) After today’s update completed and I restarted Firefox. I check the version and it still was V8.0.1. All of my extensions were gone. I followed the instruction for re-enabling. All of the extensions were marked “disabled”. Only two of them had “enable” buttons (Garmin Communicator and InvisibleHand), both of which I didn’t load nor use. All extensions had “Remove” buttons. Is there any way for me to get A.S. working, I use it often. If not, how about “Screengrab”. That’s better than nothing.
    I am using Windows XP Professional SP3.
    Thanks for your help.
    Andy Marino
    [email protected]

    There is a known issue where multiple instances of plugin container open if history or cookies are cleared. Are you, or some utility clearing firefox cookies or history, that could be the reason. This problem continues even if plugins are disabled in Firefox.
    *Are you opening multiple instances of Flash Player ?
    * Is the problem reproducible ? <br/> for instance does it always crash the plugin or cause it to hang if you use a particular site ?
    If you get the FlashPlayer plugin crashing use the option to submit the crash reports, it is then possible to follow them up. It is possible to stop the plugincontainer opening, but that could result in a firefox crash. Of course the firefox crash can also send crash reports out, and that could be useful.
    * see [[plugin crash reports]]
    * [[what is plugin-container]]
    * [[firefox crashes]]
    There are some problems with FlashPlayer currently under investigation, and there may be other threads in the forum about problems. (e.g. Bug 561019 - Plugin waveOutOpen hangs )
    Sometimes using Firefox 3.6 is a workaround that helps with FlashPlayer problems, if you wish to experiment with that consider installing firefox Portable and using Firefox 3.6.23 (or soon 3.6.24) for tests with flash player, whilst keeping firefox 7 for day to day browsing.
    * [[http://portableapps.com/apps/internet/firefox_portable/localization#legacy36]]

  • Multi GPU use with Nvidia and Radeon Card combined possible?

    I know it's unlikely but does CC support the combined use of Nvidia and AMD graphics cards, mercury engine, cuda / opencl / multi GPU feature wise?
    There's a lack of performance currently; especially when color grading. So we're gonna have to upgrade our macpro.
    Current Setup:
    Mac OS X Lion
    3,33GHz 6-Core INTEL Xeon
    24GB 1333MHz DDR 3 RAM
    ATI Radeon HD 5870
    Nvidia Quadro 4000
    SSD Raid internal
    SATA HDDs external
    What's a good / better setup especially for color grading in Premiere (might switch over to SpeedGrade CC soon)?
    We're gonna replace the Radeon HD 5870. Should we buy replace it with a NVIDIA Quadro K 5000 or a Radeon 7950 Mac Edition?
    Thanks in advance!

    Get the K5000 if you need 10bit color preview. If you dont get the 680GTX Mac edition.
    Eric
    ADK

  • Been with Verizon for a week and already have major billing issues.

    I signed up for a new share everything plan 7 days ago.  Prior to switching to Verizon from Sprint, I stopped by a Verizon store and spoke with an employee about the employee discount we would be applying.  The employee told me that we would be given a discount off of both the monthly access fee as well as the $40 smartphone fee for the "primary" line.
    I received a letter today confirming that the employee discount had been applied and I am not getting a discount on the $40 dollar smartphone fee.  I called CS earlier and was basically told tough luck.  Sorry you were given misinformation that affected your decision to switch carriers, but there is nothing we can do to help you out.
    Additionally, because we apparently signed up for Verizon service on the last day of the billing cycle, and didn't sign up for the employee discount until our 3rd day of service, the employee discount is not being applied to our first bill.  I was told that if we would've signed up for the discount on the first day of service that it would have shown on our first bill.  How was I supposed to know that the day we signed up for service was the final day of the billing cycle??
    I've been a customer for 7 days and am wondering what I've gotten myself into.  Is this really what I have to look forward to for the next 2 years?  I've been lied to, which will result in my spending of hundreds of additional dollars over the next 2 years, and have been offered no help to resolve the issue.  I am strongly considering leaving while I'm still able to.  Sprint made a VERY strong offer to retain my business and I am seriously considering taking them up on their offer.  They obviously value my business more than Verizon.

    >Comment removed<
    12/16 was the  first day I had service and the last day of my billing cycle.  It can happen and did.  Would've been nice to know so we could get our employee discount setup before the first bill was generated (2 days later).
    By not having my my 22% discount applied the $40 smartphone fee, it will literally cost me "hundreds of dollars", over the next 2 years.  Let me break it down for you: 
    $40 x 22% = $8.80
    $8.80 x 24 months = $211.20
    (This of course doesn't include the additional taxes ill be paying as well, >Refrain from comments that attack other members<
    I'm not trying to get anything different from everyone else.  For some silly reason though, I just believe that store employees should give accurate information to potential customers, especially when it influences the customer's decision to switch service providers.  The only reason they can continue to mislead customers is because there are no repercussions and because people like you seem to justify their actions.
    Message was edited by: Verizon Moderator

  • Xorg fails to restart with nvidia propertiary driver

    Hi!
    Dear fellow archers, I've got this little problem which is driving me crazy: after first successful start of xorg while booting  ("kdm" is in the DAEMONS list in rc.conf), i can't get to start it once again (for example with "/etc/rc.d/kdm restart"). When I try to do this screen goes blank (+ single underscore in top-left corner) for ~10 seconds, then nvidia logo shows up for half a second, and finally it failbacks to terminal.
    I use thinkpad T61 with nvidia quadro nvs 140m and nvidia driver version 190.42 (from extra repo).
    Thanks in advance for all suggestions.
    Xorg.0.log after I try to restart
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    X.Org X Server 1.7.3.901 (1.7.4 RC 1)
    Release Date: 2009-12-11
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.32-ARCH i686
    Current Operating System: Linux hal9000 2.6.31-ARCH #1 SMP PREEMPT Tue Nov 10 19:48:17 CET 2009 i686
    Kernel command line: root=/dev/sda2 ro vga=869
    Build Date: 12 December 2009 12:59:40PM
    Current version of pixman: 0.16.2
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec 13 16:10:30 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "X.org Configured"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) |-->Input Device "Mouse0"
    (**) |-->Input Device "Keyboard0"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (==) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    (WW) Disabling Mouse0
    (WW) Disabling Keyboard0
    (II) Loader magic: 0x81e4c60
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 6.0
    X.Org XInput driver : 7.0
    X.Org Server Extension : 2.0
    (++) using VT number 7
    (--) PCI:*(0:1:0:0) 10de:0429:17aa:20d8 nVidia Corporation Quadro NVS 140M rev 161, Mem @ 0xd6000000/16777216, 0xe0000000/268435456, 0xd4000000/33554432, I/O @ 0x00002000/128
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) "extmod" will be loaded by default.
    (II) "dbe" will be loaded by default.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri2" will be loaded by default.
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    (II) Module glx: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Server Extension
    (II) NVIDIA GLX Module 190.42 Tue Oct 20 20:55:08 PDT 2009
    (II) Loading extension GLX
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.7.3.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "synaptics"
    (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    (II) Module synaptics: vendor="X.Org Foundation"
    compiled for 1.7.0.901, module version = 1.2.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 7.0
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.7.3.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.7.3.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.7.3.901, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "nvidia"
    (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    (II) Module nvidia: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Video Driver
    (II) NVIDIA dlloader X Driver 190.42 Tue Oct 20 20:26:00 PDT 2009
    (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    (II) Primary Device is: PCI 01@00:00:0
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules/libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.7.3.901, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "wfb"
    (II) LoadModule: "wfb"
    (II) Loading /usr/lib/xorg/modules/libwfb.so
    (II) Module wfb: vendor="X.Org Foundation"
    compiled for 1.7.3.901, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
    (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    (==) NVIDIA(0): RGB weight 888
    (==) NVIDIA(0): Default visual is TrueColor
    (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    (**) NVIDIA(0): Option "Coolbits" "1"
    (**) NVIDIA(0): Option "DPI" "96 x 96"
    (**) NVIDIA(0): Option "DamageEvents" "True"
    (**) NVIDIA(0): Option "OnDemandVBlankInterrupts" "True"
    (**) Dec 13 16:10:30 NVIDIA(0): Enabling RENDER acceleration
    (II) Dec 13 16:10:30 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
    (II) Dec 13 16:10:30 NVIDIA(0): enabled.
    (II) Dec 13 16:10:43 NVIDIA(0): NVIDIA GPU Quadro NVS 140M (G86) at PCI:1:0:0 (GPU-0)
    (--) Dec 13 16:10:43 NVIDIA(0): Memory: 524288 kBytes
    (--) Dec 13 16:10:43 NVIDIA(0): VideoBIOS: 60.86.3e.00.00
    (II) Dec 13 16:10:43 NVIDIA(0): Detected PCI Express Link width: 16X
    (--) Dec 13 16:10:43 NVIDIA(0): Interlaced video modes are supported on this GPU
    (--) Dec 13 16:10:43 NVIDIA(0): Connected display device(s) on Quadro NVS 140M at PCI:1:0:0:
    (--) Dec 13 16:10:43 NVIDIA(0): BenQ FP91GP (CRT-0)
    (--) Dec 13 16:10:43 NVIDIA(0): LEN (DFP-0)
    (--) Dec 13 16:10:43 NVIDIA(0): BenQ FP91GP (CRT-0): 400.0 MHz maximum pixel clock
    (--) Dec 13 16:10:43 NVIDIA(0): LEN (DFP-0): 330.0 MHz maximum pixel clock
    (--) Dec 13 16:10:43 NVIDIA(0): LEN (DFP-0): Internal Dual Link LVDS
    (WW) Dec 13 16:10:43 NVIDIA(0): The EDID for LEN (DFP-0) contradicts itself: mode "1440x900"
    (WW) Dec 13 16:10:43 NVIDIA(0): is specified in the EDID; however, the EDID's valid
    (WW) Dec 13 16:10:43 NVIDIA(0): HorizSync range (46.301-55.556 kHz) would exclude this
    (WW) Dec 13 16:10:43 NVIDIA(0): mode's HorizSync (37.0 kHz); ignoring HorizSync check for
    (WW) Dec 13 16:10:43 NVIDIA(0): mode "1440x900".
    (WW) Dec 13 16:10:43 NVIDIA(0): The EDID for LEN (DFP-0) contradicts itself: mode "1440x900"
    (WW) Dec 13 16:10:43 NVIDIA(0): is specified in the EDID; however, the EDID's valid
    (WW) Dec 13 16:10:43 NVIDIA(0): HorizSync range (46.301-55.556 kHz) would exclude this
    (WW) Dec 13 16:10:43 NVIDIA(0): mode's HorizSync (37.0 kHz); ignoring HorizSync check for
    (WW) Dec 13 16:10:43 NVIDIA(0): mode "1440x900".
    (II) Dec 13 16:10:43 NVIDIA(0): Assigned Display Device: DFP-0
    (II) Dec 13 16:10:43 NVIDIA(0): Validated modes:
    (II) Dec 13 16:10:43 NVIDIA(0): "1440x900"
    (II) Dec 13 16:10:43 NVIDIA(0): "1024x768"
    (II) Dec 13 16:10:43 NVIDIA(0): "800x600"
    (II) Dec 13 16:10:43 NVIDIA(0): "640x480"
    (II) Dec 13 16:10:43 NVIDIA(0): Virtual screen size determined to be 1440 x 900
    (**) Dec 13 16:10:44 NVIDIA(0): DPI set to (96, 96); computed from "DPI" X config option
    (==) Dec 13 16:10:44 NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
    (--) Depth 24 pixmap format is 32 bpp
    (II) Dec 13 16:10:44 NVIDIA(0): Initialized GPU GART.
    (II) Dec 13 16:10:44 NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
    (II) Dec 13 16:10:44 NVIDIA(0): enough to receive ACPI display change hotkey events.
    (II) Dec 13 16:10:44 NVIDIA(0): Setting mode "1440x900"
    (II) Loading extension NV-GLX
    (II) Dec 13 16:10:45 NVIDIA(0): Initialized OpenGL Acceleration
    (==) NVIDIA(0): Disabling shared memory pixmaps
    (II) Dec 13 16:10:45 NVIDIA(0): Initialized X Rendering Acceleration
    (**) NVIDIA(0): Option "BackingStore" "True"
    (**) NVIDIA(0): Backing store enabled
    (==) NVIDIA(0): Silken mouse enabled
    (**) NVIDIA(0): DPMS enabled
    (II) Loading extension NV-CONTROL
    (II) Loading extension XINERAMA
    (==) RandR enabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing extension GLX
    xorg.conf
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    #InputDevice "Ultranav" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    #Section "ServerFlags"
    # Option "AutoAddDevices" "False"
    #EndSection
    #Section "Files"
    # RgbPath "/usr/share/X11/rgb"
    # ModulePath "/usr/lib/xorg/modules"
    # FontPath "/usr/share/fonts/misc"
    # FontPath "/usr/share/fonts/100dpi:unscaled"
    # FontPath "/usr/share/fonts/75dpi:unscaled"
    # FontPath "/usr/share/fonts/TTF"
    # FontPath "/usr/share/fonts/Type1"
    #EndSection
    Section "Module"
    Load "glx"
    Load "dri"
    # Load "vbe"
    # Load "ddc"
    # Load "int10"
    # Load "dbe"
    # Load "extmod"
    #Load "record"
    # Load "freetype"
    #Load "type1"
    Load "synaptics"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    Option "XkbRules" "xorg"
    Option "XkbModel" "thinkpad60"
    Option "XkbLayout" "pl"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Device" "/dev/input/mice"
    Option "Protocol" "Auto"
    # Option "XAxisMapping" "6 7"
    # Option "YAxisMapping" "4 5"
    Option "ZAxisMapping" "4 5 6 7"
    # przewijanie srodkowym przyciskiem
    # Option "EmulateWheel" "On"
    # Option "Emulate3Buttons" "On"
    # Option "EmulateWheelButton" "2"
    ## Option "EmulateWheelTimeout" "200"
    EndSection
    #Section "InputDevice"
    # Identifier "Mouse0"
    # Driver "mouse"
    # Option "SHMConfig" "on"
    # Option "Protocol" "auto"
    # Option "Device" "/dev/input/mice"
    # Option "ZAxisMapping" "4 5 6 7"
    #EndSection
    Section "InputDevice"
    Identifier "Ultranav"
    Driver "synaptics"
    Option "Device" "/dev/psaux"
    Option "Protocol" "auto-dev"
    Option "LeftEdge" "1700"
    Option "RightEdge" "5300"
    Option "TopEdge" "1700"
    Option "BottomEdge" "4200"
    Option "FingerLow" "25"
    Option "FingerHigh" "30"
    Option "MaxTapTime" "180"
    Option "MaxTapMove" "220"
    Option "VertScrollDelta" "100"
    Option "MinSpeed" "0.06"
    Option "MaxSpeed" "0.12"
    Option "AccelFactor" "0.0010"
    Option "SHMConfig" "on"
    # Option "Repeater" "/dev/ps2mouse"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Lenovo"
    ModelName "Lenovo T61 Flat Panel 1440x900"
    Option "DPMS"
    # DisplaySize 487 304 # 75 DPI @ 1440x900
    # DisplaySize 381 238 # 96 DPI @ 1440x900
    # HorizSync 28.0 - 61.0
    # VertRefresh 43.0 - 75.0
    EndSection
    Section "Device"
    Identifier "Card0"
    Driver "nvidia"
    VendorName "nVidia Corporation"
    BoardName "Quadro NVS 140M"
    Option "DPI" "96 x 96"
    Option "BackingStore" "True"
    Option "DamageEvents" "True"
    Option "DPMS" "True"
    Option "OnDemandVBlankInterrupts" "True"
    Option "Coolbits" "1"
    # Option "IgnoreDisplayDevices" "DFP, CRT, TV"
    # BusID "PCI:1:0:0"
    # Option "UseEdidDpi" "FALSE"
    # Option "AddARGBGLXVisuals" "True"
    # Option "AllowGLXWithComposite" "True"
    # Option "TripleBuffer" "True"
    # Option "DamageEvents" "True"
    # Option "BackingStore" "True"
    # Option "InitialPixmapPlacement" "3"
    # Option "GlyphCache" "1"
    # Option "PixmapCacheSize" "200000"
    # on battery - max power saving, on AC - adaptive strategy
    # Option "RegistryDwords" "PowerMizerEnable=0x1; PerfLevelSrc=0x2233; PowerMizerDefault=0x3"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    Modes "1440x900" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 16
    Modes "1440x900" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 15
    Modes "1440x900" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 8
    Modes "1440x900" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 4
    Modes "1440x900" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 1
    Modes "1440x900" "1024x768" "800x600" "640x480"
    EndSubSection
    EndSection
    #Section "Extensions"
    # Option "Composite" "Enable"
    #EndSection
    #Section "DRI"
    #Mode 0666
    #EndSection
    Last edited by tarantoga (2009-12-13 15:36:59)

    tarantoga wrote:
    falconindy wrote:
    I don't think the 190 driver is intended for the quadro M series. As per the nvidia site, the 100 or 169 drivers support your video card.
    edit: You might also try the nouveau driver.
    Well, this quadro is almost identical to geforce 8400GS, so I don't think nvidia site is up to date in this respect. Besides, other than this issue everything works just fine. It is just annoying to be forced to reboot everytime I have to restart X. And I need nvidia propertiary driver, because I use opencl.
    Thats odd then. I have an 8400gs and am using the beta driver without any issues. Give the legacy driver a try once.
    Exit the gui (ctrl+alt+f1)
    Remove the current driver
    pacman -Rd nvidia nvidia-utils
    (replace with nvidia-beta nvidia-utils-beta if you switched to the beta driver)
    Now install the legacy driver
    pacman -S nvidia-173xx nvidia-173xx-utils
    Reboot
    Hope this helps.

  • I participated in my company's video conference last week, and now the camera on my Macbook Air will not work for facetime or skype.  Help!!

    I participated in video conference with my company last week, and now I cannot use Facetime or Skype because the camera is not working?  Help, I cannot find the button to free up my camera!! 

    If you installed some kind of software to take part in the conference, remove it.
    Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
    Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
    I never install system modifications myself, and except as stated in this comment, I don't know how to uninstall them. You'll have to do your own research to find that information.
    Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmymac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button. The uninstaller might also be accessed by clicking the Customize button, if there is one.
    Back up all data before making any changes.
    You will generally have to restart the computer in order to complete an uninstallation. Until you do that, there may be no effect, or unpredictable effects.
    If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
    Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" such as "AppCleaner" and the like that purport to remove software.

  • Unable to Use Onboard Audio with Nvidia GPU since Linux 3.4

    I am currently stuck using linux 3.3.8-1 along with nvidia 295.49-1, because I don't know how to workaround the kernel disabling MSI for snd-hda-intel. This module is used by both the Nvidia HDMI audio and the ALC880 onboard audio. Previously, I have been able to disable HDMI audio to be able to use the onboard audio, but now I don't know what to do. I have attempted to use "options snd-hda-intel enable_msi=1" when modprobing on boot, which gets rid of the "hda_intel: Disabling MSI" message but it hasn't given me a working onboard audio output.
    I have also used the following command along with enable_msi=1 (found here: http://www.mjmwired.net/kernel/Document … HOWTO.txt) in my rc.local
    echo 1 > /sys/bus/pci/devices/0000\:00\:1b.0/msi_bus
    Of course, it is my assumption that the kernel disabling MSI is the cause of the problem, but it might be something else. Please let me know if any additional logs would be helpful.
    Linux 3.4.4-3, Nvidia 302.17-2  Dmesg Output
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.4.4-3-ARCH (nobody@rampage) (gcc version 4.7.1 (GCC) ) #1 SMP PREEMPT Tue Jul 3 15:35:13 UTC 2012
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fe54000 (usable)
    [ 0.000000] BIOS-e820: 000000003fe54000 - 000000003fee8000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000003fee8000 - 000000003ff00000 (ACPI data)
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] DMI 2.3 present.
    [ 0.000000] DMI: 507GR /D915GAG, BIOS AG91510J.15A.0816.2005.0214.1818 02/14/2005
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] last_pfn = 0x3fe54 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-FFFFF uncachable
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask FC0000000 write-back
    [ 0.000000] 1 base 03FF00000 mask FFFF00000 uncachable
    [ 0.000000] 2 disabled
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [c00fe650] fe650
    [ 0.000000] initial memory mapped : 0 - 00c00000
    [ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
    [ 0.000000] 0000000000 - 0000400000 page 4k
    [ 0.000000] 0000400000 - 0037400000 page 2M
    [ 0.000000] 0037400000 - 00377fe000 page 4k
    [ 0.000000] kernel direct mapping tables up to 377fe000 @ bfb000-c00000
    [ 0.000000] RAMDISK: 3fb6f000 - 3fe44000
    [ 0.000000] Allocated new RAMDISK: 37529000 - 377fd6a7
    [ 0.000000] Move RAMDISK from 000000003fb6f000 - 000000003fe436a6 to 37529000 - 377fd6a6
    [ 0.000000] ACPI: RSDP 000fe020 00014 (v00 GATEWA)
    [ 0.000000] ACPI: RSDT 3fefde48 00038 (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: FACP 3fefcf10 00074 (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: DSDT 3fef8010 0339C (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: FACS 3fee5c40 00040
    [ 0.000000] ACPI: APIC 3fefce10 00068 (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: WDDT 3fef7f90 00040 (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: MCFG 3fef7f10 0003C (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: SSDT 3fef6d90 00124 (v01 GATEWA CpuPm 00000330 MSFT 01000013)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 134MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] Normal 0x00001000 -> 0x000377fe
    [ 0.000000] HighMem 0x000377fe -> 0x0003fe54
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] Early memory PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x0003fe54
    [ 0.000000] On node 0 totalpages: 261603
    [ 0.000000] free_area_init_node: node 0, pgdat c061ec40, node_mem_map f6d28200
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 269 pages used for memmap
    [ 0.000000] HighMem zone: 34121 pages, LIFO batch:7
    [ 0.000000] Using APIC driver default
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    [ 0.000000] Allocating PCI resources starting at 3ff00000 (gap: 3ff00000:c0100000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 13 pages/cpu @f6d07000 s31424 r0 d21824 u53248
    [ 0.000000] pcpu-alloc: s31424 r0 d21824 u53248 alloc=13*4096
    [ 0.000000] pcpu-alloc: [0] 0 [0] 1
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259558
    [ 0.000000] Kernel command line: root=/dev/disk/by-uuid/10f8033d-8fe9-46be-bccf-68a14025bbaa ro init=/bin/systemd
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Initializing CPU#0
    [ 0.000000] allocated 2093600 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Initializing HighMem for node 0 (000377fe:0003fe54)
    [ 0.000000] Memory: 1025576k/1046864k available (3810k kernel code, 20836k reserved, 1471k data, 524k init, 137560k highmem)
    [ 0.000000] virtual kernel memory layout:
    [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    [ 0.000000] .init : 0xc0629000 - 0xc06ac000 ( 524 kB)
    [ 0.000000] .data : 0xc04b88f7 - 0xc0628800 (1471 kB)
    [ 0.000000] .text : 0xc0100000 - 0xc04b88f7 (3810 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] NR_IRQS:2304 nr_irqs:512 16
    [ 0.000000] CPU 0 irqstacks, hard=f6408000 soft=f640a000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 2999.992 MHz processor.
    [ 0.006668] Calibrating delay loop (skipped), value calculated using timer frequency.. 6002.98 BogoMIPS (lpj=9999973)
    [ 0.006674] pid_max: default: 32768 minimum: 301
    [ 0.006706] Security Framework initialized
    [ 0.006712] AppArmor: AppArmor disabled by boot time parameter
    [ 0.006735] Mount-cache hash table entries: 512
    [ 0.007027] Initializing cgroup subsys cpuacct
    [ 0.007032] Initializing cgroup subsys memory
    [ 0.007043] Initializing cgroup subsys devices
    [ 0.007046] Initializing cgroup subsys freezer
    [ 0.007049] Initializing cgroup subsys net_cls
    [ 0.007052] Initializing cgroup subsys blkio
    [ 0.007102] CPU: Physical Processor ID: 0
    [ 0.007105] CPU: Processor Core ID: 0
    [ 0.007108] mce: CPU supports 4 MCE banks
    [ 0.007122] CPU0: Thermal monitoring enabled (TM1)
    [ 0.007127] using mwait in idle threads.
    [ 0.010796] ACPI: Core revision 20120320
    [ 0.013347] ftrace: allocating 16930 entries in 34 pages
    [ 0.023410] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.023795] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.058322] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01
    [ 0.059996] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
    [ 0.059996] ... version: 0
    [ 0.059996] ... bit width: 40
    [ 0.059996] ... generic registers: 18
    [ 0.059996] ... value mask: 000000ffffffffff
    [ 0.059996] ... max period: 0000007fffffffff
    [ 0.059996] ... fixed-purpose events: 0
    [ 0.059996] ... event mask: 000000000003ffff
    [ 0.076747] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.096685] CPU 1 irqstacks, hard=f64ae000 soft=f64b0000
    [ 0.096689] Booting Node 0, Processors #1 Ok.
    [ 0.009999] Initializing CPU#1
    [ 0.109847] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.109913] Brought up 2 CPUs
    [ 0.109918] Total of 2 processors activated (12004.96 BogoMIPS).
    [ 0.110087] devtmpfs: initialized
    [ 0.110253] PM: Registering ACPI NVS region [mem 0x3fe54000-0x3fee7fff] (606208 bytes)
    [ 0.111622] NET: Registered protocol family 16
    [ 0.111622] ACPI: bus type pci registered
    [ 0.111622] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.111622] PCI: not using MMCONFIG
    [ 0.112603] PCI: Using configuration type 1 for base access
    [ 0.116699] bio: create slab <bio-0> at 0
    [ 0.116741] ACPI: Added _OSI(Module Device)
    [ 0.116741] ACPI: Added _OSI(Processor Device)
    [ 0.116741] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.116741] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.117482] ACPI: EC: Look up EC in DSDT
    [ 0.119433] ACPI: Interpreter enabled
    [ 0.119446] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.119477] ACPI: Using IOAPIC for interrupt routing
    [ 0.119501] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.119654] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    [ 0.119657] PCI: Using MMCONFIG for extended config space
    [ 0.121061] ACPI: No dock devices found.
    [ 0.121073] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    [ 0.122518] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.125297] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
    [ 0.125302] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
    [ 0.125306] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    [ 0.125310] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000fffff] (ignored)
    [ 0.125314] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfbffffff] (ignored)
    [ 0.125317] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xe0000000] (ignored)
    [ 0.125321] PCI: root bus 00: using default resources
    [ 0.125377] PCI host bridge to bus 0000:00
    [ 0.125382] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
    [ 0.125385] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
    [ 0.125400] pci 0000:00:00.0: [8086:2580] type 00 class 0x060000
    [ 0.125463] pci 0000:00:01.0: [8086:2581] type 01 class 0x060400
    [ 0.125521] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.125577] pci 0000:00:1b.0: [8086:2668] type 00 class 0x040300
    [ 0.125597] pci 0000:00:1b.0: reg 10: [mem 0x53300000-0x53303fff 64bit]
    [ 0.125676] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.125704] pci 0000:00:1c.0: [8086:2660] type 01 class 0x060400
    [ 0.125786] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.125815] pci 0000:00:1c.1: [8086:2662] type 01 class 0x060400
    [ 0.125898] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.125928] pci 0000:00:1c.2: [8086:2664] type 01 class 0x060400
    [ 0.126011] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.126040] pci 0000:00:1c.3: [8086:2666] type 01 class 0x060400
    [ 0.126123] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.126154] pci 0000:00:1d.0: [8086:2658] type 00 class 0x0c0300
    [ 0.126201] pci 0000:00:1d.0: reg 20: [io 0x4080-0x409f]
    [ 0.126239] pci 0000:00:1d.1: [8086:2659] type 00 class 0x0c0300
    [ 0.126285] pci 0000:00:1d.1: reg 20: [io 0x4060-0x407f]
    [ 0.126322] pci 0000:00:1d.2: [8086:265a] type 00 class 0x0c0300
    [ 0.126368] pci 0000:00:1d.2: reg 20: [io 0x4040-0x405f]
    [ 0.126405] pci 0000:00:1d.3: [8086:265b] type 00 class 0x0c0300
    [ 0.126451] pci 0000:00:1d.3: reg 20: [io 0x4020-0x403f]
    [ 0.126498] pci 0000:00:1d.7: [8086:265c] type 00 class 0x0c0320
    [ 0.126521] pci 0000:00:1d.7: reg 10: [mem 0x53304000-0x533043ff]
    [ 0.126613] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.126638] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
    [ 0.126718] pci 0000:00:1f.0: [8086:2640] type 00 class 0x060100
    [ 0.126810] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
    [ 0.126823] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0680-06ff
    [ 0.126850] pci 0000:00:1f.1: [8086:266f] type 00 class 0x01018a
    [ 0.126867] pci 0000:00:1f.1: reg 10: [io 0x40d8-0x40df]
    [ 0.126878] pci 0000:00:1f.1: reg 14: [io 0x40ec-0x40ef]
    [ 0.126889] pci 0000:00:1f.1: reg 18: [io 0x40d0-0x40d7]
    [ 0.126901] pci 0000:00:1f.1: reg 1c: [io 0x40e8-0x40eb]
    [ 0.126912] pci 0000:00:1f.1: reg 20: [io 0x40b0-0x40bf]
    [ 0.126954] pci 0000:00:1f.2: [8086:2651] type 00 class 0x01018f
    [ 0.126971] pci 0000:00:1f.2: reg 10: [io 0x40c8-0x40cf]
    [ 0.126981] pci 0000:00:1f.2: reg 14: [io 0x40e4-0x40e7]
    [ 0.126991] pci 0000:00:1f.2: reg 18: [io 0x40c0-0x40c7]
    [ 0.127002] pci 0000:00:1f.2: reg 1c: [io 0x40e0-0x40e3]
    [ 0.127012] pci 0000:00:1f.2: reg 20: [io 0x40a0-0x40af]
    [ 0.127053] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.127072] pci 0000:00:1f.3: [8086:266a] type 00 class 0x0c0500
    [ 0.127129] pci 0000:00:1f.3: reg 20: [io 0x4000-0x401f]
    [ 0.127217] pci 0000:01:00.0: [10de:0a65] type 00 class 0x030000
    [ 0.127232] pci 0000:01:00.0: reg 10: [mem 0x52000000-0x52ffffff]
    [ 0.127247] pci 0000:01:00.0: reg 14: [mem 0x40000000-0x4fffffff 64bit pref]
    [ 0.127261] pci 0000:01:00.0: reg 1c: [mem 0x50000000-0x51ffffff 64bit pref]
    [ 0.127271] pci 0000:01:00.0: reg 24: [io 0x3000-0x307f]
    [ 0.127281] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref]
    [ 0.127352] pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300
    [ 0.127367] pci 0000:01:00.1: reg 10: [mem 0x53000000-0x53003fff]
    [ 0.136679] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.136685] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
    [ 0.136689] pci 0000:00:01.0: bridge window [mem 0x52000000-0x530fffff]
    [ 0.136695] pci 0000:00:01.0: bridge window [mem 0x40000000-0x51ffffff pref]
    [ 0.136765] pci 0000:02:00.0: [1b21:0612] type 00 class 0x010601
    [ 0.136788] pci 0000:02:00.0: reg 10: [io 0x2028-0x202f]
    [ 0.136804] pci 0000:02:00.0: reg 14: [io 0x2034-0x2037]
    [ 0.136819] pci 0000:02:00.0: reg 18: [io 0x2020-0x2027]
    [ 0.136836] pci 0000:02:00.0: reg 1c: [io 0x2030-0x2033]
    [ 0.136852] pci 0000:02:00.0: reg 20: [io 0x2000-0x201f]
    [ 0.136868] pci 0000:02:00.0: reg 24: [mem 0x53200000-0x532001ff]
    [ 0.136885] pci 0000:02:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
    [ 0.146676] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 0.146682] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.146687] pci 0000:00:1c.0: bridge window [mem 0x53200000-0x532fffff]
    [ 0.146740] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
    [ 0.146747] pci 0000:00:1c.1: bridge window [mem 0x53400000-0x534fffff]
    [ 0.146798] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
    [ 0.146805] pci 0000:00:1c.2: bridge window [mem 0x53500000-0x535fffff]
    [ 0.146858] pci 0000:00:1c.3: PCI bridge to [bus 05-05]
    [ 0.146866] pci 0000:00:1c.3: bridge window [mem 0x53600000-0x536fffff]
    [ 0.146917] pci 0000:06:05.0: [11c1:5811] type 00 class 0x0c0010
    [ 0.146938] pci 0000:06:05.0: reg 10: [mem 0x53101000-0x53101fff]
    [ 0.147024] pci 0000:06:05.0: supports D1 D2
    [ 0.147027] pci 0000:06:05.0: PME# supported from D0 D1 D2 D3hot
    [ 0.147053] pci 0000:06:08.0: [8086:1064] type 00 class 0x020000
    [ 0.147074] pci 0000:06:08.0: reg 10: [mem 0x53100000-0x53100fff]
    [ 0.147086] pci 0000:06:08.0: reg 14: [io 0x1000-0x103f]
    [ 0.147161] pci 0000:06:08.0: supports D1 D2
    [ 0.147164] pci 0000:06:08.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.147208] pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
    [ 0.147214] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]
    [ 0.147219] pci 0000:00:1e.0: bridge window [mem 0x53100000-0x531fffff]
    [ 0.147227] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
    [ 0.147231] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
    [ 0.147260] pci_bus 0000:00: on NUMA node 0
    [ 0.147266] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.147465] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
    [ 0.147735] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
    [ 0.147802] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
    [ 0.147870] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
    [ 0.147936] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
    [ 0.148039] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.148044] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    [ 0.148047] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 0.152485] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.152581] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12)
    [ 0.152676] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.152768] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.152859] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.152951] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
    [ 0.153045] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
    [ 0.153138] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11 12)
    [ 0.153367] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.153374] vgaarb: loaded
    [ 0.153377] vgaarb: bridge control possible 0000:01:00.0
    [ 0.153377] PCI: Using ACPI for IRQ routing
    [ 0.160505] PCI: pci_cache_line_size set to 64 bytes
    [ 0.160612] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
    [ 0.160616] reserve RAM buffer: 000000003fe54000 - 000000003fffffff
    [ 0.160771] NetLabel: Initializing
    [ 0.160775] NetLabel: domain hash size = 128
    [ 0.160777] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.160799] NetLabel: unlabeled traffic allowed by default
    [ 0.160906] hpet clockevent registered
    [ 0.160911] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    [ 0.160917] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 0.160924] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    [ 0.173350] Switching to clocksource hpet
    [ 0.182676] pnp: PnP ACPI init
    [ 0.182706] ACPI: bus type pnp registered
    [ 0.184200] pnp 00:00: [bus 00-ff]
    [ 0.184205] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.184209] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.184212] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.184216] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.184219] pnp 00:00: [mem 0x000c0000-0x000fffff window]
    [ 0.184223] pnp 00:00: [mem 0xf0000000-0xfbffffff window]
    [ 0.184229] pnp 00:00: [mem 0x40000000-0xe0000000 window]
    [ 0.184297] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
    [ 0.184317] pnp 00:01: [mem 0xe0000000-0xefffffff]
    [ 0.184321] pnp 00:01: [mem 0xfed13000-0xfed13fff]
    [ 0.184324] pnp 00:01: [mem 0xfed14000-0xfed17fff]
    [ 0.184327] pnp 00:01: [mem 0xfed18000-0xfed18fff]
    [ 0.184330] pnp 00:01: [mem 0xfed19000-0xfed19fff]
    [ 0.184333] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
    [ 0.184336] pnp 00:01: [mem 0xfed20000-0xfed9ffff]
    [ 0.184412] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.184417] system 00:01: [mem 0xfed13000-0xfed13fff] has been reserved
    [ 0.184421] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
    [ 0.184425] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.184429] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.184432] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.184436] system 00:01: [mem 0xfed20000-0xfed9ffff] has been reserved
    [ 0.184442] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.184642] pnp 00:02: [io 0x0000-0x000f]
    [ 0.184646] pnp 00:02: [io 0x0081-0x0083]
    [ 0.184649] pnp 00:02: [io 0x0087]
    [ 0.184652] pnp 00:02: [io 0x0089-0x008b]
    [ 0.184655] pnp 00:02: [io 0x008f]
    [ 0.184658] pnp 00:02: [io 0x00c0-0x00df]
    [ 0.184661] pnp 00:02: [dma 4]
    [ 0.184706] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.184723] pnp 00:03: [io 0x0070-0x0071]
    [ 0.184726] pnp 00:03: [io 0x0074-0x0077]
    [ 0.184740] pnp 00:03: [irq 8]
    [ 0.184783] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.184802] pnp 00:04: [io 0x00f0]
    [ 0.184810] pnp 00:04: [irq 13]
    [ 0.184854] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.184871] pnp 00:05: [io 0x0061]
    [ 0.184919] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.184938] pnp 00:06: [io 0x0500-0x053f]
    [ 0.184942] pnp 00:06: [io 0x0400-0x047f]
    [ 0.184945] pnp 00:06: [io 0x0092]
    [ 0.184948] pnp 00:06: [io 0x0680-0x06ff]
    [ 0.184951] pnp 00:06: [io 0x0010-0x001f]
    [ 0.184954] pnp 00:06: [io 0x0072-0x0073]
    [ 0.184956] pnp 00:06: [io 0x0080]
    [ 0.184959] pnp 00:06: [io 0x0084-0x0086]
    [ 0.184962] pnp 00:06: [io 0x0088]
    [ 0.184965] pnp 00:06: [io 0x008c-0x008e]
    [ 0.184968] pnp 00:06: [io 0x0090-0x009f]
    [ 0.185047] system 00:06: [io 0x0500-0x053f] has been reserved
    [ 0.185051] system 00:06: [io 0x0400-0x047f] has been reserved
    [ 0.185055] system 00:06: [io 0x0680-0x06ff] has been reserved
    [ 0.185061] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.185320] pnp 00:07: [io 0x0378-0x037f]
    [ 0.185329] pnp 00:07: [irq 7]
    [ 0.185426] pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
    [ 0.185514] pnp 00:08: [irq 12]
    [ 0.185563] pnp 00:08: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
    [ 0.185600] pnp 00:09: [io 0x0060]
    [ 0.185604] pnp 00:09: [io 0x0064]
    [ 0.185611] pnp 00:09: [irq 1]
    [ 0.185661] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 0.185822] pnp 00:0a: [io 0x03f8-0x03ff]
    [ 0.185831] pnp 00:0a: [irq 4]
    [ 0.185938] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.185964] pnp 00:0b: [mem 0xfec00000-0xfec000ff]
    [ 0.186015] pnp 00:0b: Plug and Play ACPI device, IDs PNP0003 (active)
    [ 0.186047] pnp: PnP ACPI: found 12 devices
    [ 0.186049] ACPI: ACPI bus type pnp unregistered
    [ 0.224576] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
    [ 0.224583] pci 0000:02:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
    [ 0.224623] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x001fffff pref] to [bus 02-02] add_size 200000
    [ 0.224635] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03-03] add_size 1000
    [ 0.224640] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-03] add_size 200000
    [ 0.224651] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 04-04] add_size 1000
    [ 0.224656] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04-04] add_size 200000
    [ 0.224667] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 05-05] add_size 1000
    [ 0.224672] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05-05] add_size 200000
    [ 0.224692] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
    [ 0.224696] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.224701] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.224705] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.224709] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.224713] pci 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.224717] pci 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.224726] pci 0000:00:1c.0: BAR 15: assigned [mem 0x53700000-0x539fffff pref]
    [ 0.224731] pci 0000:00:1c.1: BAR 15: assigned [mem 0x53a00000-0x53bfffff 64bit pref]
    [ 0.224736] pci 0000:00:1c.2: BAR 15: assigned [mem 0x53c00000-0x53dfffff 64bit pref]
    [ 0.224740] pci 0000:00:1c.3: BAR 15: assigned [mem 0x53e00000-0x53ffffff 64bit pref]
    [ 0.224745] pci 0000:00:1c.1: BAR 13: assigned [io 0x5000-0x5fff]
    [ 0.224750] pci 0000:00:1c.2: BAR 13: assigned [io 0x6000-0x6fff]
    [ 0.224754] pci 0000:00:1c.3: BAR 13: assigned [io 0x7000-0x7fff]
    [ 0.224761] pci 0000:01:00.0: BAR 6: assigned [mem 0x53080000-0x530fffff pref]
    [ 0.224765] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.224770] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
    [ 0.224775] pci 0000:00:01.0: bridge window [mem 0x52000000-0x530fffff]
    [ 0.224780] pci 0000:00:01.0: bridge window [mem 0x40000000-0x51ffffff pref]
    [ 0.224788] pci 0000:02:00.0: BAR 6: assigned [mem 0x53700000-0x5370ffff pref]
    [ 0.224791] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 0.224796] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.224802] pci 0000:00:1c.0: bridge window [mem 0x53200000-0x532fffff]
    [ 0.224807] pci 0000:00:1c.0: bridge window [mem 0x53700000-0x539fffff pref]
    [ 0.224815] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
    [ 0.224819] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
    [ 0.224825] pci 0000:00:1c.1: bridge window [mem 0x53400000-0x534fffff]
    [ 0.224831] pci 0000:00:1c.1: bridge window [mem 0x53a00000-0x53bfffff 64bit pref]
    [ 0.224838] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
    [ 0.224842] pci 0000:00:1c.2: bridge window [io 0x6000-0x6fff]
    [ 0.224849] pci 0000:00:1c.2: bridge window [mem 0x53500000-0x535fffff]
    [ 0.224854] pci 0000:00:1c.2: bridge window [mem 0x53c00000-0x53dfffff 64bit pref]
    [ 0.224861] pci 0000:00:1c.3: PCI bridge to [bus 05-05]
    [ 0.224865] pci 0000:00:1c.3: bridge window [io 0x7000-0x7fff]
    [ 0.224872] pci 0000:00:1c.3: bridge window [mem 0x53600000-0x536fffff]
    [ 0.224877] pci 0000:00:1c.3: bridge window [mem 0x53e00000-0x53ffffff 64bit pref]
    [ 0.224885] pci 0000:00:1e.0: PCI bridge to [bus 06-06]
    [ 0.224889] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]
    [ 0.224895] pci 0000:00:1e.0: bridge window [mem 0x53100000-0x531fffff]
    [ 0.224959] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.224966] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
    [ 0.224969] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
    [ 0.224974] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
    [ 0.224977] pci_bus 0000:01: resource 1 [mem 0x52000000-0x530fffff]
    [ 0.224980] pci_bus 0000:01: resource 2 [mem 0x40000000-0x51ffffff pref]
    [ 0.224984] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    [ 0.224987] pci_bus 0000:02: resource 1 [mem 0x53200000-0x532fffff]
    [ 0.224990] pci_bus 0000:02: resource 2 [mem 0x53700000-0x539fffff pref]
    [ 0.224994] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
    [ 0.224997] pci_bus 0000:03: resource 1 [mem 0x53400000-0x534fffff]
    [ 0.225001] pci_bus 0000:03: resource 2 [mem 0x53a00000-0x53bfffff 64bit pref]
    [ 0.225004] pci_bus 0000:04: resource 0 [io 0x6000-0x6fff]
    [ 0.225007] pci_bus 0000:04: resource 1 [mem 0x53500000-0x535fffff]
    [ 0.225011] pci_bus 0000:04: resource 2 [mem 0x53c00000-0x53dfffff 64bit pref]
    [ 0.225014] pci_bus 0000:05: resource 0 [io 0x7000-0x7fff]
    [ 0.225018] pci_bus 0000:05: resource 1 [mem 0x53600000-0x536fffff]
    [ 0.225021] pci_bus 0000:05: resource 2 [mem 0x53e00000-0x53ffffff 64bit pref]
    [ 0.225025] pci_bus 0000:06: resource 0 [io 0x1000-0x1fff]
    [ 0.225028] pci_bus 0000:06: resource 1 [mem 0x53100000-0x531fffff]
    [ 0.225031] pci_bus 0000:06: resource 4 [io 0x0000-0xffff]
    [ 0.225035] pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffff]
    [ 0.225091] NET: Registered protocol family 2
    [ 0.225171] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [ 0.225391] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.225895] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.226187] TCP: Hash tables configured (established 131072 bind 65536)
    [ 0.226190] TCP: reno registered
    [ 0.226195] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.226208] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.226329] NET: Registered protocol family 1
    [ 0.226637] pci 0000:01:00.0: Boot video device
    [ 0.226698] pci 0000:06:08.0: Firmware left e100 interrupts enabled; disabling
    [ 0.226709] PCI: CLS 0 bytes, default 64
    [ 0.226780] Unpacking initramfs...
    [ 0.315303] Freeing initrd memory: 2900k freed
    [ 0.317191] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    [ 0.317195] apm: disabled - APM is not SMP safe.
    [ 0.317515] audit: initializing netlink socket (disabled)
    [ 0.317533] type=2000 audit(1342552654.316:1): initialized
    [ 0.317976] highmem bounce pool size: 64 pages
    [ 0.317984] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 0.320723] VFS: Disk quotas dquot_6.5.2
    [ 0.320797] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 0.320931] msgmni has been set to 1740
    [ 0.321235] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.321282] io scheduler noop registered
    [ 0.321287] io scheduler deadline registered
    [ 0.321299] io scheduler cfq registered (default)
    [ 0.321473] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 0.321588] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
    [ 0.321708] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
    [ 0.321830] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
    [ 0.321950] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
    [ 0.322243] GHES: HEST is not enabled!
    [ 0.322264] isapnp: Scanning for PnP cards...
    [ 0.678327] isapnp: No Plug & Play device found
    [ 0.678412] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.698985] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.720023] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.720384] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    [ 0.723503] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.723558] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.723755] mousedev: PS/2 mouse device common for all mice
    [ 0.723869] rtc_cmos 00:03: RTC can wake from S4
    [ 0.724031] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [ 0.724060] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
    [ 0.724098] cpuidle: using governor ladder
    [ 0.724101] cpuidle: using governor menu
    [ 0.724316] TCP: cubic registered
    [ 0.724489] NET: Registered protocol family 10
    [ 0.724741] NET: Registered protocol family 17
    [ 0.724748] Registering the dns_resolver key type
    [ 0.724796] Using IPI No-Shortcut mode
    [ 0.724971] PM: Hibernation image not present or could not be loaded.
    [ 0.724985] registered taskstats version 1
    [ 0.725540] rtc_cmos 00:03: setting system clock to 2012-07-17 19:17:35 UTC (1342552655)
    [ 0.725588] Initializing network drop monitor service
    [ 0.726860] Freeing unused kernel memory: 524k freed
    [ 0.727195] Write protecting the kernel text: 3812k
    [ 0.727226] Write protecting the kernel read-only data: 1120k
    [ 0.740567] systemd-udevd[41]: starting version 186
    [ 0.742721] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.745749] SCSI subsystem initialized
    [ 0.749328] libata version 3.00 loaded.
    [ 0.750857] ahci 0000:02:00.0: version 3.0
    [ 0.750961] ahci 0000:02:00.0: irq 45 for MSI/MSI-X
    [ 0.751021] ahci: SSS flag set, parallel bus scan disabled
    [ 0.751069] ahci 0000:02:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
    [ 0.751077] ahci 0000:02:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
    [ 0.752850] scsi0 : ahci
    [ 0.753200] scsi1 : ahci
    [ 0.753383] ata1: SATA max UDMA/133 abar m512@0x53200000 port 0x53200100 irq 45
    [ 0.753391] ata2: SATA max UDMA/133 abar m512@0x53200000 port 0x53200180 irq 45
    [ 1.240043] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 1.252105] ata1.00: ATA-8: OCZ-SOLID3, 2.15, max UDMA/133
    [ 1.252110] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.262069] ata1.00: configured for UDMA/133
    [ 1.262262] scsi 0:0:0:0: Direct-Access ATA OCZ-SOLID3 2.15 PQ: 0 ANSI: 5
    [ 1.264029] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
    [ 1.264196] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.264203] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.264257] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.265654] sda: sda1 sda2 sda3 sda4
    [ 1.266383] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.320034] Refined TSC clocksource calibration: 2999.980 MHz.
    [ 1.320041] Switching to clocksource tsc
    [ 1.746702] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 1.747318] ata2.00: ATA-8: ST3000DM001-9YN166, CC4C, max UDMA/133
    [ 1.747323] ata2.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
    [ 1.747889] ata2.00: configured for UDMA/133
    [ 1.748030] scsi 1:0:0:0: Direct-Access ATA ST3000DM001-9YN1 CC4C PQ: 0 ANSI: 5
    [ 1.748540] sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
    [ 1.748547] sd 1:0:0:0: [sdb] 4096-byte physical blocks
    [ 1.748667] sd 1:0:0:0: [sdb] Write Protect is off
    [ 1.748674] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 1.748725] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.793835] sdb: sdb1
    [ 1.794347] sd 1:0:0:0: [sdb] Attached SCSI disk
    [ 1.892420] usbcore: registered new interface driver usbfs
    [ 1.892471] usbcore: registered new interface driver hub
    [ 1.895559] ata_piix 0000:00:1f.1: version 2.13
    [ 1.895639] ata_piix 0000:00:1f.1: setting latency timer to 64
    [ 1.897473] usbcore: registered new device driver usb
    [ 1.898382] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.898429] scsi2 : ata_piix
    [ 1.899754] scsi3 : ata_piix
    [ 1.900600] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40b0 irq 14
    [ 1.900605] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40b8 irq 15
    [ 1.900676] ata4: port disabled--ignoring
    [ 1.901417] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
    [ 1.901473] ata_piix 0000:00:1f.2: setting latency timer to 64
    [ 1.904508] scsi4 : ata_piix
    [ 1.905087] scsi5 : ata_piix
    [ 1.905220] ata5: SATA max UDMA/133 cmd 0x40c8 ctl 0x40e4 bmdma 0x40a0 irq 19
    [ 1.905227] ata6: SATA max UDMA/133 cmd 0x40c0 ctl 0x40e0 bmdma 0x40a8 irq 19
    [ 1.905347] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [ 1.905355] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [ 1.905401] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    [ 1.905444] ehci_hcd 0000:00:1d.7: debug port 1
    [ 1.905558] uhci_hcd: USB Universal Host Controller Interface driver
    [ 1.909355] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
    [ 1.909393] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x53304000
    [ 1.916865] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 1.917873] hub 1-0:1.0: USB hub found
    [ 1.917883] hub 1-0:1.0: 8 ports detected
    [ 1.918079] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 1.918087] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 1.918109] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 1.918149] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080
    [ 1.918445] hub 2-0:1.0: USB hub found
    [ 1.918456] hub 2-0:1.0: 2 ports detected
    [ 1.918663] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 1.918671] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 1.918692] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    [ 1.918728] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060
    [ 1.919043] hub 3-0:1.0: USB hub found
    [ 1.919053] hub 3-0:1.0: 2 ports detected
    [ 1.919306] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 1.919314] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 1.919338] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    [ 1.919391] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
    [ 1.919771] hub 4-0:1.0: USB hub found
    [ 1.919781] hub 4-0:1.0: 2 ports detected
    [ 1.920058] uhci_hcd 0000:00:1d.3: setting latency timer to 64
    [ 1.920066] uhci_hcd 0000:00:1d.3: UHCI Host Controller
    [ 1.920085] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    [ 1.920162] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020
    [ 1.920720] hub 5-0:1.0: USB hub found
    [ 1.920731] hub 5-0:1.0: 2 ports detected
    [ 2.068266] ata6.00: ATA-6: WDC WD2000JD-00HBB0, 08.02D08, max UDMA/133
    [ 2.068272] ata6.00: 390721968 sectors, multi 16: LBA48
    [ 2.074099] ata5.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133
    [ 2.074104] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 2.081454] ata6.00: configured for UDMA/133
    [ 2.100167] ata5.01: ATA-8: ST3500418AS, CC34, max UDMA/133
    [ 2.100172] ata5.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 2.107102] ata5.00: configured for UDMA/133
    [ 2.162850] ata5.01: configured for UDMA/133
    [ 2.173642] ata3.00: ATAPI: SONY DVD RW DRU-530A, 2.1g, max UDMA/33
    [ 2.173649] ata3.01: ATAPI: LITE-ON DVDRW SOHW-1633S, BGS4, max UDMA/66
    [ 2.173654] ata3.01: limited to UDMA/33 due to 40-wire cable
    [ 2.186862] ata3.00: configured for UDMA/33
    [ 2.200194] ata3.01: configured for UDMA/33
    [ 2.201725] scsi 2:0:0:0: CD-ROM SONY DVD RW DRU-530A 2.1g PQ: 0 ANSI: 5
    [ 2.202839] scsi 2:0:1:0: CD-ROM LITE-ON DVDRW SOHW-1633S BGS4 PQ: 0 ANSI: 5
    [ 2.203271] scsi 4:0:0:0: Direct-Access ATA WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5
    [ 2.203548] sd 4:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
    [ 2.203557] sd 4:0:0:0: [sdc] 4096-byte physical blocks
    [ 2.203683] sd 4:0:0:0: [sdc] Write Protect is off
    [ 2.203690] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
    [ 2.203749] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.203803] scsi 4:0:1:0: Direct-Access ATA ST3500418AS CC34 PQ: 0 ANSI: 5
    [ 2.204553] scsi 5:0:0:0: Direct-Access ATA WDC WD2000JD-00H 08.0 PQ: 0 ANSI: 5
    [ 2.204737] sd 4:0:1:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 2.204849] sd 5:0:0:0: [sde] 390721968 512-byte logical blocks: (200 GB/186 GiB)
    [ 2.204969] sd 5:0:0:0: [sde] Write Protect is off
    [ 2.204976] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
    [ 2.205029] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.223374] usb 1-2: new high-speed USB device number 2 using ehci_hcd
    [ 2.225847] sdc: sdc1
    [ 2.225864] sd 4:0:1:0: [sdd] Write Protect is off
    [ 2.225872] sd 4:0:1:0: [sdd] Mode Sense: 00 3a 00 00
    [ 2.225944] sd 4:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.226606] sd 4:0:0:0: [sdc] Attached SCSI disk
    [ 2.242524] sdd: sdd1
    [ 2.243011] sd 4:0:1:0: [sdd] Attached SCSI disk
    [ 2.250598] sde: sde2 sde3 < sde5 sde6 >
    [ 2.251325] sd 5:0:0:0: [sde] Attached SCSI disk
    [ 2.263852] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
    [ 2.263860] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.265692] sr 2:0:0:0: Attached scsi CD-ROM sr0
    [ 2.269125] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
    [ 2.270115] sr 2:0:1:0: Attached scsi CD-ROM sr1
    [ 2.453377] usb 1-3: new high-speed USB device number 3 using ehci_hcd
    [ 2.630176] input: Western Digital My Book as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.1/input/input1
    [ 2.630296] generic-usb 0003:1058:1102.0001: input,hidraw0: USB HID v1.11 Device [Western Digital My Book] on usb-0000:00:1d.7-3/input1
    [ 2.630361] usbcore: registered new interface driver usbhid
    [ 2.630366] usbhid: USB HID core driver
    [ 2.720033] usb 1-5: new high-speed USB device number 4 using ehci_hcd
    [ 2.992001] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 3.123459] usb 5-1: new low-speed USB device number 2 using uhci_hcd
    [ 3.170371] systemd[1]: systemd 186 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP; arch)
    [ 3.189960] systemd[1]: Inserted module 'autofs4'
    [ 3.190421] systemd[1]: Set hostname to <bbq>.
    [ 3.347408] systemd[1]: Cannot add dependency job for unit exportfs.service, ignoring: Unit exportfs.service failed to load: No such file or directory. See system logs and 'systemctl status exportfs.service' for details.
    [ 3.347444] systemd[1]: Cannot add dependency job for unit arch-daemons.target, ignoring: Unit arch-daemons.target failed to load: No such file or directory. See system logs and 'systemctl status arch-daemons.target' for details.
    [ 3.347509] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
    [ 3.600924] systemd-readahead[134]: Bumped block_nr parameter of 8:0 to 16384. This is a temporary hack and should be removed one day.
    [ 3.890242] systemd-udevd[139]: starting version 186
    [ 3.928976] systemd-journald[146]: Fixed max_use=50.2M max_size=6.2M min_size=64.0K keep_free=25.1M
    [ 3.929449] systemd-journald[146]: Vacuuming...
    [ 4.016020] FS-Cache: Loaded
    [ 4.026904] RPC: Registered named UNIX socket transport module.
    [ 4.026909] RPC: Registered udp transport module.
    [ 4.026912] RPC: Registered tcp transport module.
    [ 4.026914] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 4.068138] EXT4-fs (sda1): re-mounted. Opts: (null)
    [ 4.071885] NFS: Registering the id_resolver key type
    [ 4.071920] FS-Cache: Netfs 'nfs' registered for caching
    [ 4.090493] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
    [ 4.103300] Installing knfsd (copyright (C) 1996 [email protected]).
    [ 4.106821] ACPI: Sleep Button [SLPB]
    [ 4.114494] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 4.114509] ACPI: Power Button [PWRF]
    [ 4.135074] parport_pc 00:07: reported by Plug and Play ACPI
    [ 4.135106] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
    [ 4.157067] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
    [ 4.178255] Linux agpgart interface v0.103
    [ 4.202375] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
    [ 4.203197] hda_intel: Disabling MSI
    [ 4.255263] intel_rng: Firmware space is locked read-only. If you can't or
    [ 4.255267] intel_rng: don't want to disable this in firmware setup, and if
    [ 4.255271] intel_rng: you are certain that your system has a functional
    [ 4.255274] intel_rng: RNG, try using the 'no_fwh_detect' option.
    [ 4.273750] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
    [ 4.273757] e100: Copyright(c) 1999-2006 Intel Corporation
    [ 4.274079] iTCO_vendor_support: vendor-support=0
    [ 4.285411] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
    [ 4.285661] iTCO_wdt: Found a ICH6 or ICH6R TCO device (Version=2, TCOBASE=0x0460)
    [ 4.285769] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 4.380102] usbcore: registered new interface driver uas
    [ 4.415911] Initializing USB Mass Storage driver...
    [ 4.423630] scsi6 : usb-storage 1-3:1.0
    [ 4.423883] usbcore: registered new interface driver usb-storage
    [ 4.423888] USB Mass Storage support registered.
    [ 4.426642] e100 0000:06:08.0: eth0: addr 0x53100000, irq 20, MAC addr 00:11:11:9d:19:91
    [ 4.434273] scsi7 : usb-storage 1-5:1.0
    [ 4.434499] usbcore: registered new interface driver ums-cypress
    [ 4.475410] psmouse serio1: hgpk: ID: 10 00 64
    [ 4.480175] firewire_ohci 0000:06:05.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
    [ 4.487522] microcode: CPU0 sig=0xf41, pf=0x10, revision=0xd
    [ 4.506728] Registered IR keymap rc-ati-x10
    [ 4.507019] input: X10 Wireless Technology Inc USB Receiver as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/rc/rc0/input5
    [ 4.507357] rc0: X10 Wireless Technology Inc USB Receiver as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/rc/rc0
    [ 4.507587] input: X10 Wireless Technology Inc USB Receiver mouse as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input6
    [ 4.507783] usbcore: registered new interface driver ati_remote
    [ 4.530507] psmouse serio1: logips2pp: Detected unknown Logitech mouse model 127
    [ 4.687581] ppdev: user-space parallel port driver
    [ 4.761362] Adding 1047928k swap on /dev/sda2. Priority:-1 extents:1 across:1047928k SS
    [ 4.804984] microcode: CPU1 sig=0xf41, pf=0x10, revision=0xd
    [ 4.814875] nvidia: module license 'NVIDIA' taints kernel.
    [ 4.814882] Disabling lock debugging due to kernel taint
    [ 4.822000] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 4.926478] fuse init (API version 7.18)
    [ 4.970217] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
    [ 4.971016] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
    [ 4.971676] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
    [ 4.971943] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
    [ 4.980870] firewire_core 0000:06:05.0: created device fw0: GUID 00111100009d1991, S400
    [ 4.981627] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    [ 4.982035] NVRM: loading NVIDIA UNIX x86 Kernel Module 302.17 Tue Jun 12 18:37:51 PDT 2012
    [ 5.031213] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input11
    [ 5.432483] scsi 6:0:0:0: Direct-Access WD My Book 1028 PQ: 0 ANSI: 4
    [ 5.436924] sd 6:0:0:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [ 5.437226] scsi 7:0:0:0: Direct-Access WDC WD25 00JB-00GVA0 PQ: 0 ANSI: 0
    [ 5.438100] sd 7:0:0:0: [sdg] 488397168 512-byte logical blocks: (250 GB/232 GiB)
    [ 5.439101] sd 7:0:0:0: [sdg] Write Protect is off
    [ 5.439109] sd 7:0:0:0: [sdg] Mode Sense: 33 00 00 00
    [ 5.439482] sd 6:0:0:0: [sdf] Write Protect is off
    [ 5.439489] sd 6:0:0:0: [sdf] Mode Sense: 10 00 00 00
    [ 5.440101] sd 7:0:0:0: [sdg] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
    [ 5.442224] sd 6:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 5.463763] sdg: sdg1 sdg2
    [ 5.467100] sd 7:0:0:0: [sdg] Attached SCSI disk
    [ 5.469267] sdf: sdf1
    [ 5.491846] sd 6:0:0:0: [sdf] Attached SCSI disk
    [ 36.480046] usb 1-5: reset high-speed USB device number 4 using ehci_hcd
    [ 37.347138] systemd-journald[146]: Fixed max_use=1.4G max_size=128.0M min_size=64.0K keep_free=765.3M
    [ 37.347165] systemd-journald[146]: Flushing to /var...
    [ 37.837240] EXT4-fs (sdf1): mounted filesystem with ordered data mode. Opts: (null)
    [ 37.906826] EXT4-fs (sdg2): mounted filesystem with ordered data mode. Opts: (null)
    [ 38.068461] EXT4-fs (sde6): mounted filesystem with ordered data mode. Opts: (null)
    [ 38.194403] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
    [ 38.740678] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
    [ 38.747081] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
    [ 39.486016] ip_tables: (C) 2000-2006 Netfilter Core Team
    [ 39.599796] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
    [ 39.600119] NFSD: starting 90-second grace period
    [ 40.579508] Netfilter messages via NETLINK v0.30.
    [ 40.594917] nf_conntrack version 0.5.0 (16078 buckets, 64312 max)
    [ 40.746099] ip6_tables: (C) 2000-2006 Netfilter Core Team
    [ 40.747318] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
    [ 40.747325] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
    [ 40.786415] ctnetlink v0.93: registering with nfnetlink.
    [ 40.886321] ip_set: protocol 6
    [ 40.898284] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
    [ 41.762042] xt_time: kernel timezone is -0000
    [ 42.318176] Bridge firewalling registered
    [ 42.704278] u32 classifier
    [ 42.704284] input device check on
    [ 42.704287] Actions configured
    [ 43.154527] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 43.156826] e100 0000:06:08.0: eth0: NIC Link is Up 100 Mbps Full Duplex
    [ 43.157214] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [ 44.557798] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
    [ 44.872612] [drm] Initialized drm 1.1.0 20060810
    [ 44.881629] wmi: Mapper loaded
    [ 51.096207] zram: module is from the staging directory, the quality is unknown, you have been warned.
    [ 51.105163] zram: Unknown parameter `zram_num_devices'
    [ 51.148183] zram: module is from the staging directory, the quality is unknown, you have been warned.
    [ 51.148690] zram: Creating 2 devices ...
    [ 51.398897] Adding 514496k swap on /dev/zram0. Priority:100 extents:1 across:514496k SS
    [ 51.406500] Adding 514496k swap on /dev/zram1. Priority:100 extents:1 across:514496k SS
    [ 76.005728] bootchart-collector started as pid 1586 with 2 args: '--dump' '/tmp/bootchart.94K3Fb6yom'
    [ 76.005734] Extracting profile data from pid 178
    [ 76.005736] map 0xbfe14000 -> 0xbfe35000 size: 132k from 'bfe14000' 'bfe35000'
    [ 76.005739] read 135168 bytes of 135168
    [ 76.005741] reading 101 chunks (of 101) ... wrote 12527 kb
    [ 76.005743] bootchart-collector pid: 1586 unmounted proc / clean exit
    Linux 3.3.8-1, Nvidia 295.49-1 Dmesg Output
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.3.8-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.0 20120505 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Jun 5 13:24:07 UTC 2012
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fe54000 (usable)
    [ 0.000000] BIOS-e820: 000000003fe54000 - 000000003fee8000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000003fee8000 - 000000003ff00000 (ACPI data)
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] DMI 2.3 present.
    [ 0.000000] DMI: 507GR /D915GAG, BIOS AG91510J.15A.0816.2005.0214.1818 02/14/2005
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] last_pfn = 0x3fe54 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-FFFFF uncachable
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask FC0000000 write-back
    [ 0.000000] 1 base 03FF00000 mask FFFF00000 uncachable
    [ 0.000000] 2 disabled
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [c00fe650] fe650
    [ 0.000000] initial memory mapped : 0 - 00c00000
    [ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
    [ 0.000000] 0000000000 - 0000400000 page 4k
    [ 0.000000] 0000400000 - 0037400000 page 2M
    [ 0.000000] 0037400000 - 00377fe000 page 4k
    [ 0.000000] kernel direct mapping tables up to 377fe000 @ bfb000-c00000
    [ 0.000000] RAMDISK: 3fb70000 - 3fe44000
    [ 0.000000] Allocated new RAMDISK: 3752a000 - 377fd833
    [ 0.000000] Move RAMDISK from 000000003fb70000 - 000000003fe43832 to 3752a000 - 377fd832
    [ 0.000000] ACPI: RSDP 000fe020 00014 (v00 GATEWA)
    [ 0.000000] ACPI: RSDT 3fefde48 00038 (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: FACP 3fefcf10 00074 (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: DSDT 3fef8010 0339C (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: FACS 3fee5c40 00040
    [ 0.000000] ACPI: APIC 3fefce10 00068 (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: WDDT 3fef7f90 00040 (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: MCFG 3fef7f10 0003C (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: SSDT 3fef6d90 00124 (v01 GATEWA CpuPm 00000330 MSFT 01000013)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 134MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] Normal 0x00001000 -> 0x000377fe
    [ 0.000000] HighMem 0x000377fe -> 0x0003fe54
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] Early memory PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x0003fe54
    [ 0.000000] On node 0 totalpages: 261603
    [ 0.000000] free_area_init_node: node 0, pgdat c060c580, node_mem_map f6d29200
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 269 pages used for memmap
    [ 0.000000] HighMem zone: 34121 pages, LIFO batch:7
    [ 0.000000] Using APIC driver default
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    [ 0.000000] Allocating PCI resources starting at 3ff00000 (gap: 3ff00000:c0100000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 13 pages/cpu @f6d08000 s30848 r0 d22400 u53248
    [ 0.000000] pcpu-alloc: s30848 r0 d22400 u53248 alloc=13*4096
    [ 0.000000] pcpu-alloc: [0] 0 [0] 1
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259558
    [ 0.000000] Kernel command line: root=/dev/disk/by-uuid/10f8033d-8fe9-46be-bccf-68a14025bbaa ro init=/bin/systemd
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Initializing CPU#0
    [ 0.000000] allocated 2093600 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Initializing HighMem for node 0 (000377fe:0003fe54)
    [ 0.000000] Memory: 1025660k/1046864k available (3774k kernel code, 20752k reserved, 1434k data, 520k init, 137560k highmem)
    [ 0.000000] virtual kernel memory layout:
    [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    [ 0.000000] .init : 0xc0617000 - 0xc0699000 ( 520 kB)
    [ 0.000000] .data : 0xc04af9a9 - 0xc0616400 (1434 kB)
    [ 0.000000] .text : 0xc0100000 - 0xc04af9a9 (3774 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:2304 nr_irqs:512 16
    [ 0.000000] CPU 0 irqstacks, hard=f6408000 soft=f640a000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 3000.097 MHz processor.
    [ 0.006668] Calibrating delay loop (skipped), value calculated using timer frequency.. 6002.20 BogoMIPS (lpj=10000323)
    [ 0.006674] pid_max: default: 32768 minimum: 301
    [ 0.006706] Security Framework initialized
    [ 0.006712] AppArmor: AppArmor disabled by boot time parameter
    [ 0.006735] Mount-cache hash table entries: 512
    [ 0.006921] Initializing cgroup subsys cpuacct
    [ 0.006925] Initializing cgroup subsys memory
    [ 0.006936] Initializing cgroup subsys devices
    [ 0.006939] Initializing cgroup subsys freezer
    [ 0.006942] Initializing cgroup subsys net_cls
    [ 0.006945] Initializing cgroup subsys blkio
    [ 0.006989] CPU: Physical Processor ID: 0
    [ 0.006992] CPU: Processor Core ID: 0
    [ 0.006995] mce: CPU supports 4 MCE banks
    [ 0.007009] CPU0: Thermal monitoring enabled (TM1)
    [ 0.007014] using mwait in idle threads.
    [ 0.010636] ACPI: Core revision 20120111
    [ 0.013347] ftrace: allocating 16622 entries in 33 pages
    [ 0.020077] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.020459] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.054563] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01
    [ 0.056663] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
    [ 0.056663] ... version: 0
    [ 0.056663] ... bit width: 40
    [ 0.056663] ... generic registers: 18
    [ 0.056663] ... value mask: 000000ffffffffff
    [ 0.056663] ... max period: 0000007fffffffff
    [ 0.056663] ... fixed-purpose events: 0
    [ 0.056663] ... event mask: 000000000003ffff
    [ 0.073415] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.100018] CPU 1 irqstacks, hard=f64a4000 soft=f64a6000
    [ 0.100021] Booting Node 0, Processors #1 Ok.
    [ 0.100025] smpboot cpu 1: start_ip = 9a000
    [ 0.009999] Initializing CPU#1
    [ 0.113372] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.120000] Brought up 2 CPUs
    [ 0.120006] Total of 2 processors activated (12005.40 BogoMIPS).
    [ 0.120978] devtmpfs: initialized
    [ 0.120978] PM: Registering ACPI NVS region at 3fe54000 (606208 bytes)
    [ 0.120978] NET: Registered protocol family 16
    [ 0.120978] ACPI: bus type pci registered
    [ 0.120978] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.120978] PCI: not using MMCONFIG
    [ 0.123293] PCI: Using configuration type 1 for base access
    [ 0.126717] bio: create slab <bio-0> at 0
    [ 0.126739] ACPI: Added _OSI(Module Device)
    [ 0.126739] ACPI: Added _OSI(Processor Device)
    [ 0.126739] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.126739] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.127496] ACPI: EC: Look up EC in DSDT
    [ 0.127496] ACPI: Interpreter enabled
    [ 0.127496] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.127496] ACPI: Using IOAPIC for interrupt routing
    [ 0.127496] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.127496] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    [ 0.127496] PCI: Using MMCONFIG for extended config space
    [ 0.131872] ACPI: No dock devices found.
    [ 0.131883] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    [ 0.133334] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.136111] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
    [ 0.136116] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
    [ 0.136120] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    [ 0.136123] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000fffff] (ignored)
    [ 0.136127] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfbffffff] (ignored)
    [ 0.136131] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xe0000000] (ignored)
    [ 0.136134] PCI: root bus 00: using default resources
    [ 0.136196] PCI host bridge to bus 0000:00
    [ 0.136201] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
    [ 0.136206] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
    [ 0.136220] pci 0000:00:00.0: [8086:2580] type 0 class 0x000600
    [ 0.136283] pci 0000:00:01.0: [8086:2581] type 1 class 0x000604
    [ 0.136340] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.13639

    And here is the output of alsa-info.sh which I have also added to the original post:
    upload=true&script=true&cardinfo=
    !!ALSA Information Script v 0.4.61
    !!Script ran on: Wed Jul 18 00:10:56 UTC 2012
    !!Linux Distribution
    Arch Linux \r (\l) DISTRIB_ID=archlinux DISTRIB_DESCRIPTION="Arch Linux" NAME="Arch Linux" ID=arch PRETTY_NAME="Arch Linux" HOME_URL="http://www.archlinux.org/" SUPPORT_URL="https://bbs.archlinux.org/" BUG_REPORT_URL="https://bugs.archlinux.org/"
    !!DMI Information
    Manufacturer:
    Product Name: 507GR
    Product Version:
    Firmware Version: AG91510J.15A.0816.2005.0214.1818
    !!Kernel Information
    Kernel release: 3.4.4-3-ARCH
    Operating System: GNU/Linux
    Architecture: i686
    Processor: unknown
    SMP Enabled: Yes
    !!ALSA Version
    Driver version: 1.0.25
    Library version: 1.0.25
    Utilities version: 1.0.25
    !!Loaded ALSA modules
    snd_hda_intel
    snd_hda_intel
    !!Sound Servers on this system
    Jack:
    Installed - Yes (/usr/bin/jackd)
    Running - No
    !!Soundcards recognised by ALSA
    0 [Intel ]: HDA-Intel - HDA Intel
    HDA Intel at 0x53300000 irq 46
    1 [NVidia ]: HDA-Intel - HDA NVidia
    HDA NVidia at 0x53000000 irq 17
    !!PCI Soundcards installed in the system
    00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03)
    01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1)
    !!Advanced information - PCI Vendor/Device/Subsystem ID's
    00:1b.0 0403: 8086:2668 (rev 03)
    Subsystem: 107b:4037
    01:00.1 0403: 10de:0be3 (rev a1)
    Subsystem: 1043:8354
    !!Loaded sound module options
    !!Module: snd_hda_intel
    align_buffer_size : -1
    bdl_pos_adj : 1,32,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
    beep_mode : 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1
    enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
    enable_msi : -1
    id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
    index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
    model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
    patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
    position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
    power_save : 0
    power_save_controller : Y
    probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
    probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
    single_cmd : N
    snoop : Y
    !!Module: snd_hda_intel
    align_buffer_size : -1
    bdl_pos_adj : 1,32,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
    beep_mode : 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1
    enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
    enable_msi : -1
    id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
    index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
    model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
    patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
    position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
    power_save : 0
    power_save_controller : Y
    probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
    probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
    single_cmd : N
    snoop : Y
    !!HDA-Intel Codec information
    --startcollapse--
    Codec: Realtek ALC880
    Address: 2
    AFG Function Id: 0x1 (unsol 0)
    Vendor Id: 0x10ec0880
    Subsystem Id: 0x08600000
    Revision Id: 0x90000
    No Modem Function Group found
    Default PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Default Amp-In caps: N/A
    Default Amp-Out caps: N/A
    GPIO: io=2, o=0, i=0, unsolicited=1, wake=0
    IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
    IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
    Node 0x02 [Audio Output] wcaps 0x411: Stereo
    Converter: stream=0, channel=0
    PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Power states: D0 D1 D2 D3
    Power: setting=D0, actual=D0
    Node 0x03 [Audio Output] wcaps 0x411: Stereo
    Converter: stream=0, channel=0
    PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Power states: D0 D1 D2 D3
    Power: setting=D0, actual=D0
    Node 0x04 [Audio Output] wcaps 0x411: Stereo
    Converter: stream=0, channel=0
    PCM:
    rates [0x160]: 44100 48000 96000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Power states: D0 D1 D2 D3
    Power: setting=D0, actual=D0
    Node 0x05 [Audio Output] wcaps 0x411: Stereo
    Converter: stream=0, channel=0
    PCM:
    rates [0x160]: 44100 48000 96000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Power states: D0 D1 D2 D3
    Power: setting=D0, actual=D0
    Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
    Converter: stream=0, channel=0
    Digital:
    Digital category: 0x0
    PCM:
    rates [0x160]: 44100 48000 96000
    bits [0x1e]: 16 20 24 32
    formats [0x1]: PCM
    Node 0x07 [Vendor Defined Widget] wcaps 0xf0051b: Stereo Amp-In
    Amp-In caps: ofs=0x00, nsteps=0x23, stepsize=0x03, mute=1
    Amp-In vals:
    Power states: D0 D1 D2 D3
    Power: setting=D0, actual=D0
    Connection: 0
    Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In
    Amp-In caps: ofs=0x00, nsteps=0x23, stepsize=0x03, mute=1
    Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
    Converter: stream=0, channel=0
    SDI-Select: 0
    PCM:
    rates [0x160]: 44100 48000 96000
    bits [0x6]: 16 20
    formats [0x1]: PCM
    Power states: D0 D1 D2 D3
    Power: setting=D0, actual=D0
    Connection: 7
    0x18 0x19 0x1a* 0x1b 0x1c 0x14 0x15
    Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In
    Amp-In caps: ofs=0x00, nsteps=0x23, stepsize=0x03, mute=1
    Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
    Converter: stream=0, channel=0
    SDI-Select: 0
    PCM:
    rates [0x160]: 44100 48000 96000
    bits [0x6]: 16 20
    formats [0x1]: PCM
    Power states: D0 D1 D2 D3
    Power: setting=D0, actual=D0
    Connection: 10
    0x18 0x19 0x1a 0x1b 0x1c* 0x0b 0x14 0x15 0x16 0x17
    Node 0x0a [Audio Input] wcaps 0x100391: Stereo Digital
    Converter: stream=0, channel=0
    SDI-Select: 0
    Digital:
    Digital category: 0x0
    PCM:
    rates [0x160]: 44100 48000 96000
    bits [0x1e]: 16 20 24 32
    formats [0x1]: PCM
    Unsolicited: tag=00, enabled=0
    Connection: 1
    0x1f
    Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
    Control: name="Beep Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=5, ofs=0
    Control: name="Beep Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=5, ofs=0
    Amp-In caps: ofs=0x23, nsteps=0x41, stepsize=0x03, mute=1
    Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0xa3 0xa3] [0x80 0x80] [0x80 0x80]
    Connection: 8
    0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15
    Node 0x0c [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
    Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-In vals: [0x00 0x00] [0x80 0x80]
    Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
    Amp-Out vals: [0x40 0x40]
    Connection: 2
    0x02 0x0b
    Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
    Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-In vals: [0x00 0x00] [0x80 0x80]
    Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
    Amp-Out vals: [0x40 0x40]
    Connection: 2
    0x03 0x0b
    Node 0x0e [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
    Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-In vals: [0x00 0x00] [0x80 0x80]
    Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
    Amp-Out vals: [0x40 0x40]
    Connection: 2
    0x04 0x0b
    Node 0x0f [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
    Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-In vals: [0x00 0x00] [0x80 0x80]
    Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
    Amp-Out vals: [0x40 0x40]
    Connection: 2
    0x05 0x0b
    Node 0x10 [Audio Selector] wcaps 0x300101: Stereo
    Connection: 4
    0x0c* 0x0d 0x0e 0x0f
    Node 0x11 [Audio Selector] wcaps 0x300101: Stereo
    Connection: 4
    0x0c* 0x0d 0x0e 0x0f
    Node 0x12 [Audio Selector] wcaps 0x300101: Stereo
    Connection: 4
    0x0c* 0x0d 0x0e 0x0f
    Node 0x13 [Audio Selector] wcaps 0x300101: Stereo
    Connection: 4
    0x0c* 0x0d 0x0e 0x0f
    Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Pincap 0x0000003f: IN OUT HP Detect Trigger ImpSense
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x40: OUT
    Unsolicited: tag=00, enabled=0
    Connection: 1
    0x0c
    Node 0x15 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Pincap 0x0000003f: IN OUT HP Detect Trigger ImpSense
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x40: OUT
    Unsolicited: tag=00, enabled=0
    Connection: 1
    0x0d
    Node 0x16 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Pincap 0x0000003f: IN OUT HP Detect Trigger ImpSense
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x40: OUT
    Unsolicited: tag=00, enabled=0
    Connection: 1
    0x0e
    Node 0x17 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Pincap 0x0000003f: IN OUT HP Detect Trigger ImpSense
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x40: OUT
    Unsolicited: tag=00, enabled=0
    Connection: 0
    Node 0x18 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Pincap 0x0000133f: IN OUT HP Detect Trigger ImpSense
    Vref caps: HIZ 50 80
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x20: IN VREF_HIZ
    Unsolicited: tag=00, enabled=0
    Connection: 1
    0x10
    Node 0x19 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Pincap 0x0000133f: IN OUT HP Detect Trigger ImpSense
    Vref caps: HIZ 50 80
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x20: IN VREF_HIZ
    Unsolicited: tag=00, enabled=0
    Connection: 1
    0x11
    Node 0x1a [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
    Control: name="Line Jack", index=0, device=0
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Pincap 0x0000133f: IN OUT HP Detect Trigger ImpSense
    Vref caps: HIZ 50 80
    Pin Default 0x01810000: [Jack] Line In at Ext Rear
    Conn = 1/8, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x20: IN VREF_HIZ
    Unsolicited: tag=01, enabled=1
    Connection: 1
    0x12
    Node 0x1b [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Pincap 0x0000133f: IN OUT HP Detect Trigger ImpSense
    Vref caps: HIZ 50 80
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x20: IN VREF_HIZ
    Unsolicited: tag=00, enabled=0
    Connection: 1
    0x13
    Node 0x1c [Pin Complex] wcaps 0x400001: Stereo
    Pincap 0x00000020: IN
    Pin Default 0x40000000: [N/A] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x00:
    Node 0x1d [Pin Complex] wcaps 0x400000: Mono
    Pincap 0x00000020: IN
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x00:
    Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital
    Pincap 0x00000010: OUT
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x00:
    Connection: 1
    0x06
    Node 0x1f [Pin Complex] wcaps 0x400200: Mono Digital
    Pincap 0x00000020: IN
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x00:
    Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
    Processing caps: benign=0, ncoeff=10
    Node 0x21 [Volume Knob Widget] wcaps 0x600080: Mono
    Volume-Knob: delta=0, steps=64, direct=0, val=0
    Unsolicited: tag=00, enabled=0
    Connection: 0
    Codec: Nvidia GPU 0b HDMI/DP
    Address: 0
    AFG Function Id: 0x1 (unsol 0)
    Vendor Id: 0x10de000b
    Subsystem Id: 0x10de0101
    Revision Id: 0x100200
    No Modem Function Group found
    Default PCM:
    rates [0x0]:
    bits [0x0]:
    formats [0x0]:
    Default Amp-In caps: N/A
    Default Amp-Out caps: N/A
    GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
    Node 0x04 [Audio Output] wcaps 0x72b1: 8-Channels Digital Stripe CP
    Converter: stream=0, channel=0
    Digital:
    Digital category: 0x0
    PCM:
    rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
    bits [0xe]: 16 20 24
    formats [0x5]: PCM AC3
    Unsolicited: tag=00, enabled=0
    Node 0x05 [Pin Complex] wcaps 0x407381: 8-Channels Digital CP
    Control: name="HDMI/DP,pcm=3 Jack", index=0, device=0
    Control: name="IEC958 Playback Con Mask", index=0, device=0
    Control: name="IEC958 Playback Pro Mask", index=0, device=0
    Control: name="IEC958 Playback Default", index=0, device=0
    Control: name="IEC958 Playback Switch", index=0, device=0
    Control: name="ELD", index=0, device=3
    Pincap 0x09000094: OUT Detect HBR HDMI DP
    Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
    Pin-ctls: 0x00:
    Unsolicited: tag=01, enabled=1
    Connection: 1
    0x04
    Codec: Nvidia GPU 0b HDMI/DP
    Address: 1
    AFG Function Id: 0x1 (unsol 0)
    Vendor Id: 0x10de000b
    Subsystem Id: 0x10de0101
    Revision Id: 0x100200
    No Modem Function Group found
    Default PCM:
    rates [0x0]:
    bits [0x0]:
    formats [0x0]:
    Default Amp-In caps: N/A
    Default Amp-Out caps: N/A
    GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
    Node 0x04 [Audio Output] wcaps 0x72b1: 8-Channels Digital Stripe CP
    Converter: stream=0, channel=0
    Digital:
    Digital category: 0x0
    PCM:
    rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
    bits [0xe]: 16 20 24
    formats [0x5]: PCM AC3
    Unsolicited: tag=00, enabled=0
    Node 0x05 [Pin Complex] wcaps 0x407381: 8-Channels Digital CP
    Control: name="HDMI/DP,pcm=7 Jack", index=0, device=0
    Control: name="IEC958 Playback Con Mask", index=1, device=0
    Control: name="IEC958 Playback Pro Mask", index=1, device=0
    Control: name="IEC958 Playback Default", index=1, device=0
    Control: name="IEC958 Playback Switch", index=1, device=0
    Control: name="ELD", index=0, device=7
    Pincap 0x09000094: OUT Detect HBR HDMI DP
    Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
    Pin-ctls: 0x00:
    Unsolicited: tag=01, enabled=1
    Connection: 1
    0x04
    Codec: Nvidia GPU 0b HDMI/DP
    Address: 2
    AFG Function Id: 0x1 (unsol 0)
    Vendor Id: 0x10de000b
    Subsystem Id: 0x10de0101
    Revision Id: 0x100200
    No Modem Function Group found
    Default PCM:
    rates [0x0]:
    bits [0x0]:
    formats [0x0]:
    Default Amp-In caps: N/A
    Default Amp-Out caps: N/A
    GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
    Node 0x04 [Audio Output] wcaps 0x72b1: 8-Channels Digital Stripe CP
    Converter: stream=0, channel=0
    Digital:
    Digital category: 0x0
    PCM:
    rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
    bits [0xe]: 16 20 24
    formats [0x5]: PCM AC3
    Unsolicited: tag=00, enabled=0
    Node 0x05 [Pin Complex] wcaps 0x407381: 8-Channels Digital CP
    Control: name="HDMI/DP,pcm=8 Jack", index=0, device=0
    Control: name="IEC958 Playback Con Mask", index=2, device=0
    Control: name="IEC958 Playback Pro Mask", index=2, device=0
    Control: name="IEC958 Playback Default", index=2, device=0
    Control: name="IEC958 Playback Switch", index=2, device=0
    Control: name="ELD", index=0, device=8
    Pincap 0x09000094: OUT Detect HBR HDMI DP
    Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
    Pin-ctls: 0x00:
    Unsolicited: tag=01, enabled=1
    Connection: 1
    0x04
    Codec: Nvidia GPU 0b HDMI/DP
    Address: 3
    AFG Function Id: 0x1 (unsol 0)
    Vendor Id: 0x10de000b
    Subsystem Id: 0x10de0101
    Revision Id: 0x100200
    No Modem Function Group found
    Default PCM:
    rates [0x0]:
    bits [0x0]:
    formats [0x0]:
    Default Amp-In caps: N/A
    Default Amp-Out caps: N/A
    GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
    Node 0x04 [Audio Output] wcaps 0x72b1: 8-Channels Digital Stripe CP
    Converter: stream=0, channel=0
    Digital:
    Digital category: 0x0
    PCM:
    rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
    bits [0xe]: 16 20 24
    formats [0x5]: PCM AC3
    Unsolicited: tag=00, enabled=0
    Node 0x05 [Pin Complex] wcaps 0x407381: 8-Channels Digital CP
    Control: name="HDMI/DP,pcm=9 Jack", index=0, device=0
    Control: name="IEC958 Playback Con Mask", index=3, device=0
    Control: name="IEC958 Playback Pro Mask", index=3, device=0
    Control: name="IEC958 Playback Default", index=3, device=0
    Control: name="IEC958 Playback Switch", index=3, device=0
    Control: name="ELD", index=0, device=9
    Pincap 0x09000094: OUT Detect HBR HDMI DP
    Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
    Pin-ctls: 0x00:
    Unsolicited: tag=01, enabled=1
    Connection: 1
    0x04
    --endcollapse--
    !!ALSA Device nodes
    crw-rw----+ 1 root audio 116, 3 Jul 17 17:07 /dev/snd/controlC0
    crw-rw----+ 1 root audio 116, 12 Jul 17 17:07 /dev/snd/controlC1
    crw-rw----+ 1 root audio 116, 2 Jul 17 17:07 /dev/snd/hwC0D2
    crw-rw----+ 1 root audio 116, 11 Jul 17 17:07 /dev/snd/hwC1D0
    crw-rw----+ 1 root audio 116, 10 Jul 17 17:07 /dev/snd/hwC1D1
    crw-rw----+ 1 root audio 116, 9 Jul 17 17:07 /dev/snd/hwC1D2
    crw-rw----+ 1 root audio 116, 8 Jul 17 17:07 /dev/snd/hwC1D3
    crw-rw----+ 1 root audio 116, 7 Jul 17 17:07 /dev/snd/pcmC1D3p
    crw-rw----+ 1 root audio 116, 6 Jul 17 17:07 /dev/snd/pcmC1D7p
    crw-rw----+ 1 root audio 116, 5 Jul 17 17:07 /dev/snd/pcmC1D8p
    crw-rw----+ 1 root audio 116, 4 Jul 17 17:07 /dev/snd/pcmC1D9p
    crw-rw---- 1 root audio 116, 1 Jul 17 17:07 /dev/snd/seq
    crw-rw----+ 1 root audio 116, 33 Jul 17 17:07 /dev/snd/timer
    /dev/snd/by-path:
    total 0
    drwxr-xr-x 2 root root 80 Jul 17 17:07 .
    drwxr-xr-x 3 root root 320 Jul 17 17:07 ..
    lrwxrwxrwx 1 root root 12 Jul 17 17:07 pci-0000:00:1b.0 -> ../controlC0
    lrwxrwxrwx 1 root root 12 Jul 17 17:07 pci-0000:01:00.1 -> ../controlC1
    !!Aplay/Arecord output
    APLAY
    **** List of PLAYBACK Hardware Devices ****
    card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    ARECORD
    **** List of CAPTURE Hardware Devices ****
    !!Amixer output
    !!-------Mixer controls for card 0 [Intel]
    Card hw:0 'Intel'/'HDA Intel at 0x53300000 irq 46'
    Mixer name : 'Realtek ALC880'
    Components : 'HDA:10ec0880,08600000,00090000'
    Controls : 4
    Simple ctrls : 2
    Simple mixer control 'PCM',0
    Capabilities: pvolume penum
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 255
    Mono:
    Front Left: Playback 255 [100%] [0.00dB]
    Front Right: Playback 255 [100%] [0.00dB]
    Simple mixer control 'Beep',0
    Capabilities: pvolume pswitch penum
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 65
    Mono:
    Front Left: Playback 35 [54%] [0.00dB] [off]
    Front Right: Playback 35 [54%] [0.00dB] [off]
    !!-------Mixer controls for card 1 [NVidia]
    Card hw:1 'NVidia'/'HDA NVidia at 0x53000000 irq 17'
    Mixer name : 'Nvidia GPU 0b HDMI/DP'
    Components : 'HDA:10de000b,10de0101,00100200'
    Controls : 24
    Simple ctrls : 4
    Simple mixer control 'IEC958',0
    Capabilities: pswitch pswitch-joined penum
    Playback channels: Mono
    Mono: Playback [on]
    Simple mixer control 'IEC958',1
    Capabilities: pswitch pswitch-joined penum
    Playback channels: Mono
    Mono: Playback [on]
    Simple mixer control 'IEC958',2
    Capabilities: pswitch pswitch-joined penum
    Playback channels: Mono
    Mono: Playback [on]
    Simple mixer control 'IEC958',3
    Capabilities: pswitch pswitch-joined penum
    Playback channels: Mono
    Mono: Playback [on]
    !!Alsactl output
    --startcollapse--
    state.Intel {
    control.1 {
    iface MIXER
    name 'Beep Playback Volume'
    value.0 35
    value.1 35
    comment {
    access 'read write'
    type INTEGER
    count 2
    range '0 - 65'
    dbmin -3500
    dbmax 3000
    dbvalue.0 0
    dbvalue.1 0
    control.2 {
    iface MIXER
    name 'Beep Playback Switch'
    value.0 false
    value.1 false
    comment {
    access 'read write'
    type BOOLEAN
    count 2
    control.3 {
    iface CARD
    name 'Line Jack'
    value false
    comment {
    access read
    type BOOLEAN
    count 1
    control.4 {
    iface MIXER
    name 'PCM Playback Volume'
    value.0 255
    value.1 255
    comment {
    access 'read write user'
    type INTEGER
    count 2
    range '0 - 255'
    tlv '0000000100000008ffffec1400000014'
    dbmin -5100
    dbmax 0
    dbvalue.0 0
    dbvalue.1 0
    state.NVidia {
    control.1 {
    iface CARD
    name 'HDMI/DP,pcm=3 Jack'
    value false
    comment {
    access read
    type BOOLEAN
    count 1
    control.2 {
    iface MIXER
    name 'IEC958 Playback Con Mask'
    value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access read
    type IEC958
    count 1
    control.3 {
    iface MIXER
    name 'IEC958 Playback Pro Mask'
    value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access read
    type IEC958
    count 1
    control.4 {
    iface MIXER
    name 'IEC958 Playback Default'
    value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access 'read write'
    type IEC958
    count 1
    control.5 {
    iface MIXER
    name 'IEC958 Playback Switch'
    value true
    comment {
    access 'read write'
    type BOOLEAN
    count 1
    control.6 {
    iface PCM
    device 3
    name ELD
    value ''
    comment {
    access read
    type BYTES
    count 0
    control.7 {
    iface CARD
    name 'HDMI/DP,pcm=7 Jack'
    value false
    comment {
    access read
    type BOOLEAN
    count 1
    control.8 {
    iface MIXER
    name 'IEC958 Playback Con Mask'
    index 1
    value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access read
    type IEC958
    count 1
    control.9 {
    iface MIXER
    name 'IEC958 Playback Pro Mask'
    index 1
    value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access read
    type IEC958
    count 1
    control.10 {
    iface MIXER
    name 'IEC958 Playback Default'
    index 1
    value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access 'read write'
    type IEC958
    count 1
    control.11 {
    iface MIXER
    name 'IEC958 Playback Switch'
    index 1
    value true
    comment {
    access 'read write'
    type BOOLEAN
    count 1
    control.12 {
    iface PCM
    device 7
    name ELD
    value ''
    comment {
    access read
    type BYTES
    count 0
    control.13 {
    iface CARD
    name 'HDMI/DP,pcm=8 Jack'
    value false
    comment {
    access read
    type BOOLEAN
    count 1
    control.14 {
    iface MIXER
    name 'IEC958 Playback Con Mask'
    index 2
    value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access read
    type IEC958
    count 1
    control.15 {
    iface MIXER
    name 'IEC958 Playback Pro Mask'
    index 2
    value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access read
    type IEC958
    count 1
    control.16 {
    iface MIXER
    name 'IEC958 Playback Default'
    index 2
    value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access 'read write'
    type IEC958
    count 1
    control.17 {
    iface MIXER
    name 'IEC958 Playback Switch'
    index 2
    value true
    comment {
    access 'read write'
    type BOOLEAN
    count 1
    control.18 {
    iface PCM
    device 8
    name ELD
    value ''
    comment {
    access read
    type BYTES
    count 0
    control.19 {
    iface CARD
    name 'HDMI/DP,pcm=9 Jack'
    value false
    comment {
    access read
    type BOOLEAN
    count 1
    control.20 {
    iface MIXER
    name 'IEC958 Playback Con Mask'
    index 3
    value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access read
    type IEC958
    count 1
    control.21 {
    iface MIXER
    name 'IEC958 Playback Pro Mask'
    index 3
    value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access read
    type IEC958
    count 1
    control.22 {
    iface MIXER
    name 'IEC958 Playback Default'
    index 3
    value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access 'read write'
    type IEC958
    count 1
    control.23 {
    iface MIXER
    name 'IEC958 Playback Switch'
    index 3
    value true
    comment {
    access 'read write'
    type BOOLEAN
    count 1
    control.24 {
    iface PCM
    device 9
    name ELD
    value ''
    comment {
    access read
    type BYTES
    count 0
    --endcollapse--
    !!All Loaded Modules
    Module
    zram
    lm85
    hwmon_vid
    aes_i586
    cryptd
    aes_generic
    act_police
    cls_basic
    cls_flow
    cls_fw
    cls_u32
    sch_tbf
    sch_prio
    sch_htb
    sch_hfsc
    sch_ingress
    sch_sfq
    bridge
    stp
    llc
    xt_statistic
    xt_CT
    xt_LOG
    xt_time
    xt_connlimit
    xt_realm
    xt_addrtype
    iptable_raw
    xt_comment
    xt_recent
    xt_policy
    ipt_ULOG
    ipt_REJECT
    ipt_REDIRECT
    ipt_NETMAP
    ipt_MASQUERADE
    ipt_ECN
    ipt_CLUSTERIP
    ipt_ah
    xt_set
    ip_set
    nf_nat_tftp
    nf_nat_snmp_basic
    nf_conntrack_snmp
    nf_nat_sip
    nf_nat_pptp
    nf_nat_proto_gre
    nf_nat_irc
    nf_nat_h323
    nf_nat_ftp
    nf_nat_amanda
    ts_kmp
    nf_conntrack_amanda
    nf_conntrack_sane
    nf_conntrack_tftp
    nf_conntrack_sip
    nf_conntrack_proto_udplite
    nf_conntrack_proto_sctp
    nf_conntrack_pptp
    nf_conntrack_proto_gre
    nf_conntrack_netlink
    nf_conntrack_netbios_ns
    nf_conntrack_broadcast
    nf_conntrack_irc
    nf_conntrack_h323
    nf_conntrack_ftp
    xt_TPROXY
    nf_defrag_ipv6
    nf_tproxy_core
    ip6_tables
    xt_tcpmss
    xt_pkttype
    xt_physdev
    xt_owner
    xt_NFQUEUE
    xt_NFLOG
    nfnetlink_log
    xt_multiport
    xt_mark
    xt_mac
    xt_limit
    xt_length
    xt_iprange
    xt_helper
    xt_hashlimit
    xt_DSCP
    xt_dscp
    xt_dccp
    xt_conntrack
    xt_connmark
    xt_CLASSIFY
    xt_AUDIT
    xt_state
    iptable_nat
    nf_nat
    nf_conntrack_ipv4
    nf_defrag_ipv4
    nf_conntrack
    iptable_mangle
    nfnetlink
    xt_tcpudp
    iptable_filter
    ip_tables
    x_tables
    arc4
    fuse
    nvidia
    snd_hda_codec_hdmi
    ppdev
    ath9k_htc
    ath9k_common
    microcode
    ath9k_hw
    ath
    serio_raw
    psmouse
    evdev
    mac80211
    ums_cypress
    cfg80211
    compat
    usb_storage
    rfkill
    i2c_i801
    uas
    rc_ati_x10
    iTCO_wdt
    firewire_ohci
    ati_remote
    iTCO_vendor_support
    e100
    firewire_core
    mii
    rc_core
    crc_itu_t
    snd_hda_codec_realtek
    parport_pc
    parport
    snd_hda_intel
    snd_hda_codec
    snd_pcm
    snd_page_alloc
    snd_hwdep
    snd_timer
    nfsd
    exportfs
    intel_agp
    intel_gtt
    snd
    nfs
    i2c_core
    agpgart
    nfs_acl
    lockd
    soundcore
    auth_rpcgss
    button
    processor
    sunrpc
    fscache
    autofs4
    ext4
    crc16
    jbd2
    mbcache
    usbhid
    hid
    sr_mod
    cdrom
    pata_acpi
    ata_generic
    uhci_hcd
    ata_piix
    ehci_hcd
    usbcore
    usb_common
    sd_mod
    ahci
    libahci
    libata
    scsi_mod
    !!Sysfs Files
    /sys/class/sound/hwC0D2/init_pin_configs:
    0x14 0x00000000
    0x15 0x00000000
    0x16 0x00000000
    0x17 0x00000000
    0x18 0x00000000
    0x19 0x00000000
    0x1a 0x01810000
    0x1b 0x00000000
    0x1c 0x40000000
    0x1d 0x00000000
    0x1e 0x00000000
    0x1f 0x00000000
    /sys/class/sound/hwC0D2/driver_pin_configs:
    /sys/class/sound/hwC0D2/user_pin_configs:
    /sys/class/sound/hwC0D2/init_verbs:
    /sys/class/sound/hwC1D0/init_pin_configs:
    0x05 0x18560010
    /sys/class/sound/hwC1D0/driver_pin_configs:
    /sys/class/sound/hwC1D0/user_pin_configs:
    /sys/class/sound/hwC1D0/init_verbs:
    /sys/class/sound/hwC1D1/init_pin_configs:
    0x05 0x18560010
    /sys/class/sound/hwC1D1/driver_pin_configs:
    /sys/class/sound/hwC1D1/user_pin_configs:
    /sys/class/sound/hwC1D1/init_verbs:
    /sys/class/sound/hwC1D2/init_pin_configs:
    0x05 0x18560010
    /sys/class/sound/hwC1D2/driver_pin_configs:
    /sys/class/sound/hwC1D2/user_pin_configs:
    /sys/class/sound/hwC1D2/init_verbs:
    /sys/class/sound/hwC1D3/init_pin_configs:
    0x05 0x18560010
    /sys/class/sound/hwC1D3/driver_pin_configs:
    /sys/class/sound/hwC1D3/user_pin_configs:
    /sys/class/sound/hwC1D3/init_verbs:
    !!ALSA/HDA dmesg
    [ 3.398568] Installing knfsd (copyright (C) 1996 [email protected]).
    [ 3.431145] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
    [ 3.462799] parport_pc 00:07: reported by Plug and Play ACPI
    [ 3.462832] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
    [ 3.467010] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
    [ 3.468096] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
    [ 3.471112] hda_intel: Disabling MSI
    [ 3.522125] intel_rng: Firmware space is locked read-only. If you can't or
    [ 4.173059] ath9k_htc 1-2:1.0: ath9k_htc: HTC initialized with 45 credits
    [ 4.263632] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
    [ 4.263914] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
    [ 4.264134] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
    [ 4.264423] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
    [ 4.267027] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    I'll also see what kind of help I can get from the developers upstream.

  • Hot Debut ! MSI 2014Gaming Laptopsfeature with Nvidia GTX 800M series GPU

    MSI's gaming laptop now delivers the brand new models with latest Nvidia GTX 800M family which are more powerful and boost amazing performance of the latest gaming laptops. Under the hood, featuring the Intel 4th generation Quad Core processors and NVIDIAGeForceGTX 880M, GTX 870M GTX860M and GTX850M discrete graphics,while tipping the scales at 15.6 inch to 17 inch respectively. These gaming NBs meetgamers’ need for machines that are both lean and mean. In addition, they sport the best SteelSeries gaming keyboards with multi colorbacklit only on MSI gaming notebooks, the killer networking feature to boost the internet efficiency, new authentic Sound by Dynaudio speakers system, and XSplit Gamecaster pre-installed with a 6 month premium license for gameplay streaming MSI’s own Audio Boostheadsets sound enhancement solution. Light and powerful, these NBs will give you the furious advantage in Full HD gaming competitions.
    The most wanted exclusive features at 2014 MSI gaming laptops
    [TABLE=width: 500]
    [TR]
    [TD][/TD]
    [/TR]
    [/TABLE]
    Exclusive featuring the Steelseries keyboard and Steelseries Engine
    Exclusive featuring the best live streaming application Xsplit Gamecaster
    Exclusive equips the Super Raid 2 technology
    The world 1st leading gaming brand builds in the Killer Doubleshoot technology
    Exclusive and fine tune the sound system by Dynaudio
    Exclusive Matrix Display technology for multiple external monitor output
    The new GT series – Dominate the cyber battlefield
    Featuring NVIDIA’s latest GeForce GTX880M (Dominator Pro) and GTX870M (Dominator) graphics, the new GT70 can give the users a superior extreme gaming experience on the top-end performance platform. It provides gaming performance at "the speed of light" and with incredible resolution. And it boasts more than 15% better performance on 3D Mark 11 standard tests over similar level gaming computers of the previous generation of, like the GTX780M and GTX770M. The unique gamer oriented features design, record-shattering performance, and innovative gaming experience of MSI's gaming laptops are steadily winning over extreme gamers around the world during 2013.
    [TABLE=width: 500, align: center]
    [TR]
    [TD][/TD]
    [/TR]
    [/TABLE]
    New GS series - The Ghost killer, weapon of Stealth
    The MSI engineer refines every detailed material and component to increase the performance to the limit and stay true to portability. The MSI GS Stealth and Ghost series packs Intel core i7-4700HQ, graphics powered by NvidiaGeforce GTX870M and designed at only 19.9mm thin and weighing 1.9kgw(GS Ghost). Performance in 3D mark11 test can reach 20% more than previous generation GPU.
    [TABLE=width: 500, align: center]
    [TR]
    [TD][/TD]
    [/TR]
    [/TABLE]
    ThegroundbreakingGE Apache Pro series
    They feature Intel’s 4thGen.Quad Core processor and new generation NVIDIA GeForce GTX 870M and GTX 860M discrete graphics, and its performance is over 20% to 35% faster than GTX 770M and GT 765M graphics. GE Apacheseries are the portable and powerful battle laptops on the gaming field todaywhile weighing in at only 2.55(GE60 Apache) and 2.85(GE70 Apache) kilograms respectively, and are specially designed to meet the higher demands of heavy loading gamers around the world.
    [TABLE=width: 500, align: center]
    [TR]
    [TD][/TD]
    [/TR]
    [/TABLE]
    The faster and furious GP Leopard series for popular online games
    They featured Intel’s 4th Generation Quad Core processor and new Generation NVIDIA GeForce 840M discrete graphics. Specially designed to meet the demands of online gamers around the world. With the 22nm production technology, the Nvidia GeForce 840M performs over 2500 points on 3Dmark 11(P) and increases overall performance by 25% over GeForce GT 740M.That coupled with the fact that it supports DirectX 11 effects and NVIDIA PhysX technologies. You will be amazed by the smooth gaming experience of your favor online games on HD to Full HD resolutions, GP Leopard series is your easy to take and best companion anywhere.
    [TABLE=width: 500, align: center]
    [TR]
    [TD][/TD]
    [/TR]
    [/TABLE]

    I made a thread, but it has not been approved by a moderator yet, so I will ask the question in here since the topic is relevant.
    The GS Stealth in this topic is the same as the one MSI revealed at CES 2014.
    But what is GS 70 Stealth and GS 70 Stealth Pro on the website?
    And which one is the GS 70 Stealth that was released just a few days ago?
    I am just confused as to the naming of this particular series.
    I am looking for the GS Stealth that is the one in this topic above, but there seems to be so many versions of it and some are called 70.
    Can someone explain what is what?
    EDIT:
    nevermind, I figured it out through extensive searching on various forums.
    The new Stealth is called GS70 StealthPro-024 or GS70 StealthPro-001 in case anyone wonders.

  • GPU acceleration with the nvidia 680M card?

    Should i have GPU acceleration with the nvidia 680M card? i believe the 680 is supported but is the 680M supported? If not, any plans to support this card in the next update?

    I navigated to the cuda support folder and added the Nvidia 680M to the list. The i went to the Nvidia settings and changed the Adobe premiere setting to compatibility mode. Opened my project and began editing. It crashes after a few seconds. 
    I'm also getting this full screen issue that people are talking about. For example, when I minimise premiere to work in another program and go back to premiere when i'm done I get a full screen display of the frame currently in the preview window. This also happens when the computer is inactive for a time. I'll came back to the computer after a few minutes to find the view in full screen. Sometimes a double clip it and it brings back the standard editing workspace but sometimes I have to 'control, alt, delete' to start task manager, open a new window (can be anything) and navigated to that window then back to premiere. It's as if Premiere has frozen.

  • Ray-tracing on GPU disabled on MacBook Pro with double graphic card

    Hi to all,
    i've just installed the demo version of after effects on my new macbook pro 15".
    It has these 2 graphic cards:
    Intel Iris Pro Graphics
    NVIDIA GeForce GT 750M
    2GB memory GDDR5
    But when i open After effects CC i get this error:
    Ray-tracing on GPU requires a dgraphic card NVIDIA approved and CUDA 5.0 or above. At the moment ray-tracing will use just the CPU.
    I've seen on NVIDIA that mine is a CUDA GPU: https://developer.nvidia.com/cuda-gpus.
    Why am i getting this error?
    Thanks

    > Maybe updating your graphics driver could help. Your current version is 310.xxx while the latest version is 331.xxx but if your card is not on adobe's supported list, i guess AE won't let you use it.
    No.
    This is not about the graphics driver. It is, as I said, about the CUDA driver.
    Also, you are incorrect about After Effects not letting you use a card that is not on our whitelist; that is why there is the option "Enable untested and unsupported GPU..." (which is "Abilita GPU nontestata e non supportata..." in the original poster's Italian version).
    Details:
    http://blogs.adobe.com/aftereffects/2013/09/gpu-changes-for-cuda-and-opengl-in-after-effec ts-cc-12-1.html

  • HT203254 My MacBook Pro 15-inch with NVIDIA GeForce 8600M GT graphics processors just failed. Do you guys know if apple still fixes them?

    My MacBook Pro 15-inch with NVIDIA GeForce 8600M GT graphics processors just failed. Do you guys know if apple still fixes them?

    I tried last week. The best I could get was a discount on the repair, but the damage to my logic board by the GPU caused it to no longer boot. The program ended in December last year, but it has been extended in the past.
    If you have no other damage you might be able to get a flat rate tier 1 repair if you are in the USA.

  • [SOLVED?] Problem with nVidia card

    This is my first post, so; hello to everyone!! Thx in advance to this great community!!
    My problem is pretty strange and anoying. I have an nVidia 8600GT in a Abit AX78 MB running Arch with KDE. Anything is going right until logon process. I write the user and password in KDM screen and then, after de animation of init proces of KDE, all graphics displayed are corrupted (a rectangle in the upper left corner is showed) and that's it. Only work the mouse pointer.
    This malfunction its showed by the nouveau driver AND the proprietary driver... So i think the problem is it in other place than the driver of the card.
    The Xorg.0.log and dmesg.log files are atached at the end of this thread.
    I hope that annyone can help me.
    Thx in advance again.
    The Xorg.0.log file contains this:
    [ 15.809]
    X.Org X Server 1.10.3
    Release Date: 2011-07-08
    [ 15.814] X Protocol Version 11, Revision 0
    [ 15.814] Build Operating System: Linux 2.6.39-ARCH i686
    [ 15.814] Current Operating System: Linux hidramedia_host 2.6.39-ARCH #1 SMP PREEMPT Sat Jul 9 15:31:04 CEST 2011 i686
    [ 15.815] Kernel command line: root=/dev/sda5 ro
    [ 15.815] Build Date: 09 July 2011 07:57:07AM
    [ 15.815]
    [ 15.815] Current version of pixman: 0.22.2
    [ 15.815] Before reporting problems, check [url]http://wiki.x.org[/url]
    to make sure that you have the latest version.
    [ 15.815] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 15.815] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 1 14:13:23 2011
    [ 15.829] (==) Using config file: "/etc/X11/xorg.conf"
    [ 15.829] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 15.835] (==) ServerLayout "Layout0"
    [ 15.835] (**) |-->Screen "Screen0" (0)
    [ 15.835] (**) | |-->Monitor "Monitor0"
    [ 15.836] (**) | |-->Device "Device0"
    [ 15.836] (**) |-->Input Device "Keyboard0"
    [ 15.836] (**) |-->Input Device "Mouse0"
    [ 15.836] (==) Automatically adding devices
    [ 15.836] (==) Automatically enabling devices
    [ 15.859] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
    [ 15.859] Entry deleted from font path.
    [ 15.859] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 15.859] Entry deleted from font path.
    [ 15.859] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 15.859] Entry deleted from font path.
    [ 15.859] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 15.859] Entry deleted from font path.
    [ 15.859] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 15.859] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 15.859] Entry deleted from font path.
    [ 15.859] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 15.859] (==) FontPath set to:
    /usr/share/fonts/misc/
    [ 15.859] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 15.859] (**) Extension "Composite" is disabled
    [ 15.859] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 15.859] (WW) Disabling Keyboard0
    [ 15.859] (WW) Disabling Mouse0
    [ 15.859] (II) Loader magic: 0x822e1a0
    [ 15.859] (II) Module ABI versions:
    [ 15.859] X.Org ANSI C Emulation: 0.4
    [ 15.859] X.Org Video Driver: 10.0
    [ 15.859] X.Org XInput driver : 12.2
    [ 15.859] X.Org Server Extension : 5.0
    [ 15.860] (--) PCI:*(0:1:0:0) 10de:0402:0000:0000 rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000df00/128, BIOS @ 0x????????/131072
    [ 15.860] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 15.860] (II) LoadModule: "extmod"
    [ 15.871] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 15.880] (II) Module extmod: vendor="X.Org Foundation"
    [ 15.880] compiled for 1.10.3, module version = 1.0.0
    [ 15.880] Module class: X.Org Server Extension
    [ 15.880] ABI class: X.Org Server Extension, version 5.0
    [ 15.880] (II) Loading extension MIT-SCREEN-SAVER
    [ 15.880] (II) Loading extension XFree86-VidModeExtension
    [ 15.880] (II) Loading extension XFree86-DGA
    [ 15.880] (II) Loading extension DPMS
    [ 15.880] (II) Loading extension XVideo
    [ 15.880] (II) Loading extension XVideo-MotionCompensation
    [ 15.880] (II) Loading extension X-Resource
    [ 15.880] (II) LoadModule: "dbe"
    [ 15.880] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 15.881] (II) Module dbe: vendor="X.Org Foundation"
    [ 15.881] compiled for 1.10.3, module version = 1.0.0
    [ 15.881] Module class: X.Org Server Extension
    [ 15.881] ABI class: X.Org Server Extension, version 5.0
    [ 15.881] (II) Loading extension DOUBLE-BUFFER
    [ 15.881] (II) LoadModule: "glx"
    [ 15.881] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 16.640] (II) Module glx: vendor="NVIDIA Corporation"
    [ 16.640] compiled for 4.0.2, module version = 1.0.0
    [ 16.640] Module class: X.Org Server Extension
    [ 16.640] (II) NVIDIA GLX Module 275.21 Mon Jul 18 14:55:52 PDT 2011
    [ 16.640] (II) Loading extension GLX
    [ 16.640] (II) LoadModule: "record"
    [ 16.641] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 16.645] (II) Module record: vendor="X.Org Foundation"
    [ 16.645] compiled for 1.10.3, module version = 1.13.0
    [ 16.645] Module class: X.Org Server Extension
    [ 16.645] ABI class: X.Org Server Extension, version 5.0
    [ 16.645] (II) Loading extension RECORD
    [ 16.645] (II) LoadModule: "dri"
    [ 16.645] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 16.661] (II) Module dri: vendor="X.Org Foundation"
    [ 16.661] compiled for 1.10.3, module version = 1.0.0
    [ 16.661] ABI class: X.Org Server Extension, version 5.0
    [ 16.661] (II) Loading extension XFree86-DRI
    [ 16.661] (II) LoadModule: "dri2"
    [ 16.661] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 16.662] (II) Module dri2: vendor="X.Org Foundation"
    [ 16.662] compiled for 1.10.3, module version = 1.2.0
    [ 16.662] ABI class: X.Org Server Extension, version 5.0
    [ 16.662] (II) Loading extension DRI2
    [ 16.662] (II) LoadModule: "nvidia"
    [ 16.662] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 16.709] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 16.709] compiled for 4.0.2, module version = 1.0.0
    [ 16.709] Module class: X.Org Video Driver
    [ 16.732] (II) NVIDIA dlloader X Driver 275.21 Mon Jul 18 14:38:30 PDT 2011
    [ 16.737] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 16.740] (++) using VT number 7
    [ 16.751] (II) Loading sub module "fb"
    [ 16.751] (II) LoadModule: "fb"
    [ 16.751] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 16.762] (II) Module fb: vendor="X.Org Foundation"
    [ 16.762] compiled for 1.10.3, module version = 1.0.0
    [ 16.762] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 16.762] (II) Loading sub module "wfb"
    [ 16.762] (II) LoadModule: "wfb"
    [ 16.763] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 16.769] (II) Module wfb: vendor="X.Org Foundation"
    [ 16.769] compiled for 1.10.3, module version = 1.0.0
    [ 16.769] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 16.769] (II) Loading sub module "ramdac"
    [ 16.769] (II) LoadModule: "ramdac"
    [ 16.769] (II) Module "ramdac" already built-in
    [ 16.771] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 16.771] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 16.771] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 16.780] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 16.780] (==) NVIDIA(0): RGB weight 888
    [ 16.780] (==) NVIDIA(0): Default visual is TrueColor
    [ 16.780] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 17.785] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
    [ 17.785] (II) NVIDIA(GPU-0): 3D Vision stereo.
    [ 17.789] (II) NVIDIA(0): NVIDIA GPU GeForce 8600 GT (G84) at PCI:1:0:0 (GPU-0)
    [ 17.789] (--) NVIDIA(0): Memory: 262144 kBytes
    [ 17.789] (--) NVIDIA(0): VideoBIOS: 60.84.35.00.00
    [ 17.789] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 17.789] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    [ 17.789] (--) NVIDIA(0): Connected display device(s) on GeForce 8600 GT at PCI:1:0:0
    [ 17.789] (--) NVIDIA(0): Samsung SyncMaster (CRT-0)
    [ 17.789] (--) NVIDIA(0): Samsung SyncMaster (CRT-0): 400.0 MHz maximum pixel clock
    [ 17.859] (II) NVIDIA(0): Assigned Display Device: CRT-0
    [ 17.859] (==) NVIDIA(0):
    [ 17.859] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    [ 17.859] (==) NVIDIA(0): will be used as the requested mode.
    [ 17.859] (==) NVIDIA(0):
    [ 17.859] (II) NVIDIA(0): Validated modes:
    [ 17.859] (II) NVIDIA(0): "nvidia-auto-select"
    [ 17.859] (II) NVIDIA(0): Virtual screen size determined to be 800 x 600
    [ 17.900] (--) NVIDIA(0): DPI set to (72, 72); computed from "UseEdidDpi" X config
    [ 17.900] (--) NVIDIA(0): option
    [ 17.900] (--) Depth 24 pixmap format is 32 bpp
    [ 17.901] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
    [ 17.905] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 17.905] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 17.905] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 17.905] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 17.905] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 17.905] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 17.905] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 17.905] (II) NVIDIA(0): Config Options in the README.
    [ 17.908] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
    [ 17.946] (II) Loading extension NV-GLX
    [ 18.001] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 18.002] (==) NVIDIA(0): Backing store disabled
    [ 18.002] (==) NVIDIA(0): Silken mouse enabled
    [ 18.002] (**) NVIDIA(0): DPMS enabled
    [ 18.002] (II) Loading extension NV-CONTROL
    [ 18.003] (II) Loading extension XINERAMA
    [ 18.003] (II) Loading sub module "dri2"
    [ 18.003] (II) LoadModule: "dri2"
    [ 18.003] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 18.003] (II) Module dri2: vendor="X.Org Foundation"
    [ 18.003] compiled for 1.10.3, module version = 1.2.0
    [ 18.003] ABI class: X.Org Server Extension, version 5.0
    [ 18.003] (II) NVIDIA(0): [DRI2] Setup complete
    [ 18.003] (==) RandR enabled
    [ 18.003] (II) Initializing built-in extension Generic Event Extension
    [ 18.003] (II) Initializing built-in extension SHAPE
    [ 18.003] (II) Initializing built-in extension MIT-SHM
    [ 18.003] (II) Initializing built-in extension XInputExtension
    [ 18.003] (II) Initializing built-in extension XTEST
    [ 18.003] (II) Initializing built-in extension BIG-REQUESTS
    [ 18.003] (II) Initializing built-in extension SYNC
    [ 18.003] (II) Initializing built-in extension XKEYBOARD
    [ 18.003] (II) Initializing built-in extension XC-MISC
    [ 18.003] (II) Initializing built-in extension SECURITY
    [ 18.003] (II) Initializing built-in extension XINERAMA
    [ 18.003] (II) Initializing built-in extension XFIXES
    [ 18.003] (II) Initializing built-in extension RENDER
    [ 18.003] (II) Initializing built-in extension RANDR
    [ 18.003] (II) Initializing built-in extension COMPOSITE
    [ 18.003] (II) Initializing built-in extension DAMAGE
    [ 18.005] (II) Initializing extension GLX
    [ 18.213] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 18.213] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 18.213] (II) LoadModule: "evdev"
    [ 18.213] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 18.214] (II) Module evdev: vendor="X.Org Foundation"
    [ 18.214] compiled for 1.10.0, module version = 2.6.0
    [ 18.214] Module class: X.Org XInput Driver
    [ 18.214] ABI class: X.Org XInput driver, version 12.2
    [ 18.214] (II) Using input driver 'evdev' for 'Power Button'
    [ 18.214] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 18.214] (**) Power Button: always reports core events
    [ 18.214] (**) Power Button: Device: "/dev/input/event3"
    [ 18.226] (--) Power Button: Found keys
    [ 18.226] (II) Power Button: Configuring as keyboard
    [ 18.226] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
    [ 18.226] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 18.226] (**) Option "xkb_rules" "evdev"
    [ 18.226] (**) Option "xkb_model" "evdev"
    [ 18.226] (**) Option "xkb_layout" "us"
    [ 18.252] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 18.252] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 18.252] (II) Using input driver 'evdev' for 'Power Button'
    [ 18.252] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 18.252] (**) Power Button: always reports core events
    [ 18.252] (**) Power Button: Device: "/dev/input/event2"
    [ 18.266] (--) Power Button: Found keys
    [ 18.266] (II) Power Button: Configuring as keyboard
    [ 18.266] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
    [ 18.266] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 18.266] (**) Option "xkb_rules" "evdev"
    [ 18.266] (**) Option "xkb_model" "evdev"
    [ 18.266] (**) Option "xkb_layout" "us"
    [ 18.271] (II) config/udev: Adding input device Primax Electronics Wireless Mouse (/dev/input/event1)
    [ 18.271] (**) Primax Electronics Wireless Mouse: Applying InputClass "evdev pointer catchall"
    [ 18.271] (II) Using input driver 'evdev' for 'Primax Electronics Wireless Mouse'
    [ 18.271] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 18.271] (**) Primax Electronics Wireless Mouse: always reports core events
    [ 18.271] (**) Primax Electronics Wireless Mouse: Device: "/dev/input/event1"
    [ 18.283] (--) Primax Electronics Wireless Mouse: Found 3 mouse buttons
    [ 18.283] (--) Primax Electronics Wireless Mouse: Found scroll wheel(s)
    [ 18.283] (--) Primax Electronics Wireless Mouse: Found relative axes
    [ 18.283] (--) Primax Electronics Wireless Mouse: Found x and y relative axes
    [ 18.283] (II) Primax Electronics Wireless Mouse: Configuring as mouse
    [ 18.283] (II) Primax Electronics Wireless Mouse: Adding scrollwheel support
    [ 18.283] (**) Primax Electronics Wireless Mouse: YAxisMapping: buttons 4 and 5
    [ 18.283] (**) Primax Electronics Wireless Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 18.283] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.4/usb6/6-2/6-2:1.0/input/input1/event1"
    [ 18.283] (II) XINPUT: Adding extended input device "Primax Electronics Wireless Mouse" (type: MOUSE)
    [ 18.283] (II) Primax Electronics Wireless Mouse: initialized for relative axes.
    [ 18.283] (**) Primax Electronics Wireless Mouse: (accel) keeping acceleration scheme 1
    [ 18.283] (**) Primax Electronics Wireless Mouse: (accel) acceleration profile 0
    [ 18.283] (**) Primax Electronics Wireless Mouse: (accel) acceleration factor: 2.000
    [ 18.283] (**) Primax Electronics Wireless Mouse: (accel) acceleration threshold: 4
    [ 18.283] (II) config/udev: Adding input device Primax Electronics Wireless Mouse (/dev/input/mouse0)
    [ 18.283] (II) No input driver/identifier specified (ignoring)
    [ 18.285] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
    [ 18.285] (II) No input driver/identifier specified (ignoring)
    [ 18.285] (II) config/udev: Adding input device HDA ATI SB Headphone (/dev/input/event6)
    [ 18.285] (II) No input driver/identifier specified (ignoring)
    [ 18.286] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 18.286] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 18.286] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 18.286] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 18.286] (**) AT Translated Set 2 keyboard: always reports core events
    [ 18.286] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 18.300] (--) AT Translated Set 2 keyboard: Found keys
    [ 18.300] (II) AT Translated Set 2 keyboard: Configuring as keyboard
    [ 18.300] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 18.300] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    [ 18.300] (**) Option "xkb_rules" "evdev"
    [ 18.300] (**) Option "xkb_model" "evdev"
    [ 18.300] (**) Option "xkb_layout" "us"
    [ 18.300] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
    [ 18.300] (II) No input driver/identifier specified (ignoring)
    [ 1563.531] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
    [ 1563.587] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 1563.587] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 1563.587] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 1563.587] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 1563.587] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 1563.587] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 1563.587] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 1563.587] (II) NVIDIA(0): Config Options in the README.
    And the dmesg.log file contains this:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 2.6.39-ARCH (thomas@evey) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Sat Jul 9 15:31:04 CEST 2011
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
    [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
    [ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] DMI 2.5 present.
    [ 0.000000] DMI: . ./AX78(AMD770+SB600), BIOS 6.00 PG 01/17/2008
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] last_pfn = 0x7fff0 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-C7FFF write-protect
    [ 0.000000] C8000-CFFFF uncachable
    [ 0.000000] D0000-D3FFF write-back
    [ 0.000000] D4000-FFFFF uncachable
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0000000000 mask FF80000000 write-back
    [ 0.000000] 1 disabled
    [ 0.000000] 2 disabled
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [c00f41f0] f41f0
    [ 0.000000] initial memory mapped : 0 - 01c00000
    [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
    [ 0.000000] 0000000000 - 0000400000 page 4k
    [ 0.000000] 0000400000 - 0037400000 page 2M
    [ 0.000000] 0037400000 - 00377fe000 page 4k
    [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
    [ 0.000000] RAMDISK: 7fdc9000 - 7ffe0000
    [ 0.000000] Allocated new RAMDISK: 375e7000 - 377fd792
    [ 0.000000] Move RAMDISK from 000000007fdc9000 - 000000007ffdf791 to 375e7000 - 377fd791
    [ 0.000000] ACPI: RSDP 000f81d0 00024 (v02 AMD770)
    [ 0.000000] ACPI: RSDT 7fff3000 00038 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: FACP 7fff3080 00074 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: DSDT 7fff3100 051E2 (v01 AMD770 AWRDACPI 00001000 MSFT 03000000)
    [ 0.000000] ACPI: FACS 7fff0000 00040
    [ 0.000000] ACPI: SSDT 7fff83c0 002CC (v01 PTLTD POWERNOW 00000001 LTP 00000001)
    [ 0.000000] ACPI: HPET 7fff86c0 00038 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000098)
    [ 0.000000] ACPI: MCFG 7fff8700 0003C (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: APIC 7fff8300 00084 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 1159MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] Normal 0x00001000 -> 0x000377fe
    [ 0.000000] HighMem 0x000377fe -> 0x0007fff0
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[2] active PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x0007fff0
    [ 0.000000] On node 0 totalpages: 524159
    [ 0.000000] free_area_init_node: node 0, pgdat c14a1980, node_mem_map f65e6200
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 2320 pages used for memmap
    [ 0.000000] HighMem zone: 294626 pages, LIFO batch:31
    [ 0.000000] Using APIC driver default
    [ 0.000000] Detected use of extended apic ids on hypertransport bus
    [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
    [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 12 pages/cpu @f6000000 s27648 r0 d21504 u1048576
    [ 0.000000] pcpu-alloc: s27648 r0 d21504 u1048576 alloc=1*4194304
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520063
    [ 0.000000] Kernel command line: root=/dev/sda5 ro
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Initializing CPU#0
    [ 0.000000] allocated 8388096 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Initializing HighMem for node 0 (000377fe:0007fff0)
    [ 0.000000] Memory: 2062632k/2097088k available (3376k kernel code, 34004k reserved, 1390k data, 512k init, 1187784k highmem)
    [ 0.000000] virtual kernel memory layout:
    [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    [ 0.000000] .init : 0xc14a8000 - 0xc1528000 ( 512 kB)
    [ 0.000000] .data : 0xc134c3bf - 0xc14a7c00 (1390 kB)
    [ 0.000000] .text : 0xc1000000 - 0xc134c3bf (3376 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptable hierarchical RCU implementation.
    [ 0.000000] RCU-based detection of stalled CPUs is disabled.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:512
    [ 0.000000] CPU 0 irqstacks, hard=f540c000 soft=f540e000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration failed
    [ 0.000000] TSC: Unable to calibrate against PIT
    [ 0.000000] TSC: using HPET reference calibration
    [ 0.000000] Detected 2700.236 MHz processor.
    [ 0.000000] Marking TSC unstable due to TSCs unsynchronized
    [ 0.016736] Calibrating delay loop (skipped), value calculated using timer frequency.. 5402.49 BogoMIPS (lpj=9000786)
    [ 0.016870] pid_max: default: 32768 minimum: 301
    [ 0.016983] Security Framework initialized
    [ 0.017051] AppArmor: AppArmor disabled by boot time parameter
    [ 0.017144] Mount-cache hash table entries: 512
    [ 0.017404] Initializing cgroup subsys ns
    [ 0.017471] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
    [ 0.017549] Initializing cgroup subsys cpuacct
    [ 0.017625] Initializing cgroup subsys memory
    [ 0.017701] Initializing cgroup subsys devices
    [ 0.017767] Initializing cgroup subsys freezer
    [ 0.017833] Initializing cgroup subsys net_cls
    [ 0.017899] Initializing cgroup subsys blkio
    [ 0.017995] CPU: Physical Processor ID: 0
    [ 0.018060] CPU: Processor Core ID: 0
    [ 0.018126] mce: CPU supports 5 MCE banks
    [ 0.018199] using C1E aware idle routine
    [ 0.019127] ACPI: Core revision 20110316
    [ 0.023362] ftrace: allocating 15225 entries in 30 pages
    [ 0.026734] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.027332] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.061631] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02
    [ 0.063329] Performance Events: AMD PMU driver.
    [ 0.063329] ... version: 0
    [ 0.063329] ... bit width: 48
    [ 0.063329] ... generic registers: 4
    [ 0.063329] ... value mask: 0000ffffffffffff
    [ 0.063329] ... max period: 00007fffffffffff
    [ 0.063329] ... fixed-purpose events: 0
    [ 0.063329] ... event mask: 000000000000000f
    [ 0.080086] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.106674] CPU 1 irqstacks, hard=f54b4000 soft=f54b6000
    [ 0.106676] Booting Node 0, Processors #1
    [ 0.106783] smpboot cpu 1: start_ip = 9b000
    [ 0.019998] Initializing CPU#1
    [ 0.200085] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.206657] Brought up 2 CPUs
    [ 0.206721] Total of 2 processors activated (10805.88 BogoMIPS).
    [ 0.207206] devtmpfs: initialized
    [ 0.207206] PM: Registering ACPI NVS region at 7fff0000 (12288 bytes)
    [ 0.207649] print_constraints: dummy:
    [ 0.207764] NET: Registered protocol family 16
    [ 0.207919] node 0 link 0: io port [c000, ffff]
    [ 0.207922] TOM: 0000000080000000 aka 2048M
    [ 0.207987] node 0 link 0: mmio [a0000, bffff]
    [ 0.207990] node 0 link 0: mmio [80000000, dfffffff]
    [ 0.207992] node 0 link 0: mmio [f0000000, fe02ffff]
    [ 0.207995] node 0 link 0: mmio [e0000000, e03fffff]
    [ 0.207997] bus: [00, 03] on node 0 link 0
    [ 0.208000] bus: 00 index 0 [io 0x0000-0xffff]
    [ 0.208002] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
    [ 0.208003] bus: 00 index 2 [mem 0x80000000-0xefffffff]
    [ 0.208005] bus: 00 index 3 [mem 0xf0000000-0xffffffff]
    [ 0.208011] ACPI: bus type pci registered
    [ 0.208149] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.208227] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.208292] PCI: Using MMCONFIG for extended config space
    [ 0.208357] PCI: Using configuration type 1 for base access
    [ 0.208842] bio: create slab <bio-0> at 0
    [ 0.210574] ACPI: EC: Look up EC in DSDT
    [ 0.211181] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.214150] ACPI: Interpreter enabled
    [ 0.214220] ACPI: (supports S0 S3 S4 S5)
    [ 0.214501] ACPI: Using IOAPIC for interrupt routing
    [ 0.225790] ACPI: No dock devices found.
    [ 0.225854] HEST: Table not found.
    [ 0.225919] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.226037] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.226190] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.226257] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
    [ 0.226324] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.226399] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
    [ 0.226474] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xffffffff]
    [ 0.226562] pci 0000:00:00.0: [1002:5957] type 0 class 0x000600
    [ 0.226576] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
    [ 0.226609] pci 0000:00:02.0: [1002:5978] type 1 class 0x000604
    [ 0.226636] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
    [ 0.226639] pci 0000:00:02.0: PME# disabled
    [ 0.226667] pci 0000:00:0a.0: [1002:597f] type 1 class 0x000604
    [ 0.226693] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
    [ 0.226696] pci 0000:00:0a.0: PME# disabled
    [ 0.226723] pci 0000:00:12.0: [1002:4380] type 0 class 0x000106
    [ 0.226742] pci 0000:00:12.0: reg 10: [io 0xff00-0xff07]
    [ 0.226752] pci 0000:00:12.0: reg 14: [io 0xfe00-0xfe03]
    [ 0.226763] pci 0000:00:12.0: reg 18: [io 0xfd00-0xfd07]
    [ 0.226773] pci 0000:00:12.0: reg 1c: [io 0xfc00-0xfc03]
    [ 0.226784] pci 0000:00:12.0: reg 20: [io 0xfb00-0xfb0f]
    [ 0.226794] pci 0000:00:12.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
    [ 0.226836] pci 0000:00:13.0: [1002:4387] type 0 class 0x000c03
    [ 0.226851] pci 0000:00:13.0: reg 10: [mem 0xfe02e000-0xfe02efff]
    [ 0.226919] pci 0000:00:13.1: [1002:4388] type 0 class 0x000c03
    [ 0.226933] pci 0000:00:13.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
    [ 0.227002] pci 0000:00:13.2: [1002:4389] type 0 class 0x000c03
    [ 0.227016] pci 0000:00:13.2: reg 10: [mem 0xfe02c000-0xfe02cfff]
    [ 0.227084] pci 0000:00:13.3: [1002:438a] type 0 class 0x000c03
    [ 0.227099] pci 0000:00:13.3: reg 10: [mem 0xfe02b000-0xfe02bfff]
    [ 0.227166] pci 0000:00:13.4: [1002:438b] type 0 class 0x000c03
    [ 0.227181] pci 0000:00:13.4: reg 10: [mem 0xfe02a000-0xfe02afff]
    [ 0.227255] pci 0000:00:13.5: [1002:4386] type 0 class 0x000c03
    [ 0.227275] pci 0000:00:13.5: reg 10: [mem 0xfe029000-0xfe0290ff]
    [ 0.227351] pci 0000:00:13.5: supports D1 D2
    [ 0.227352] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
    [ 0.227357] pci 0000:00:13.5: PME# disabled
    [ 0.227379] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
    [ 0.227402] pci 0000:00:14.0: reg 10: [io 0x0b00-0x0b0f]
    [ 0.227483] pci 0000:00:14.1: [1002:438c] type 0 class 0x000101
    [ 0.227497] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
    [ 0.227507] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
    [ 0.227518] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
    [ 0.227528] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
    [ 0.227538] pci 0000:00:14.1: reg 20: [io 0xf900-0xf90f]
    [ 0.227577] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
    [ 0.227600] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
    [ 0.227663] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    [ 0.227667] pci 0000:00:14.2: PME# disabled
    [ 0.227681] pci 0000:00:14.3: [1002:438d] type 0 class 0x000601
    [ 0.227759] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
    [ 0.227808] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
    [ 0.227823] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
    [ 0.227835] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
    [ 0.227848] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
    [ 0.227903] pci 0000:01:00.0: [10de:0402] type 0 class 0x000300
    [ 0.227914] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
    [ 0.227926] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.227937] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
    [ 0.227945] pci 0000:01:00.0: reg 24: [io 0xdf00-0xdf7f]
    [ 0.227953] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [ 0.233329] pci 0000:00:02.0: PCI bridge to [bus 01-01]
    [ 0.233396] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
    [ 0.233399] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
    [ 0.233404] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.233444] pci 0000:02:00.0: [11ab:4364] type 0 class 0x000200
    [ 0.233462] pci 0000:02:00.0: reg 10: [mem 0xfdffc000-0xfdffffff 64bit]
    [ 0.233472] pci 0000:02:00.0: reg 18: [io 0xee00-0xeeff]
    [ 0.233505] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [ 0.233535] pci 0000:02:00.0: supports D1 D2
    [ 0.233537] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.233541] pci 0000:02:00.0: PME# disabled
    [ 0.239995] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
    [ 0.240062] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
    [ 0.240065] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff]
    [ 0.240069] pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
    [ 0.240134] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
    [ 0.240203] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
    [ 0.240207] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
    [ 0.240212] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
    [ 0.240214] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.240217] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.240219] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.240221] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
    [ 0.240224] pci 0000:00:14.4: bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
    [ 0.240236] pci_bus 0000:00: on NUMA node 0
    [ 0.240239] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.240363] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
    [ 0.240408] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
    [ 0.240440] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
    [ 0.240465] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.240531] Unable to assume _OSC PCIe control. Disabling ASPM
    [ 0.251996] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.252665] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.253351] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.254017] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.254684] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.255350] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.257059] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.257725] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.258446] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.258522] vgaarb: loaded
    [ 0.258678] PCI: Using ACPI for IRQ routing
    [ 0.258742] PCI: pci_cache_line_size set to 64 bytes
    [ 0.258749] pci 0000:00:00.0: address space collision: [mem 0xe0000000-0xffffffff 64bit] conflicts with PCI Bus 0000:01 [mem 0xf8000000-0xfbffffff]
    [ 0.258890] reserve RAM buffer: 000000000009f400 - 000000000009ffff
    [ 0.258893] reserve RAM buffer: 000000007fff0000 - 000000007fffffff
    [ 0.259004] NetLabel: Initializing
    [ 0.259067] NetLabel: domain hash size = 128
    [ 0.259131] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.259205] NetLabel: unlabeled traffic allowed by default
    [ 0.259287] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    [ 0.259608] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
    [ 0.261015] Switching to clocksource hpet
    [ 0.261499] Switched to NOHz mode on CPU #0
    [ 0.261582] Switched to NOHz mode on CPU #1
    [ 0.266362] pnp: PnP ACPI init
    [ 0.266443] ACPI: bus type pnp registered
    [ 0.266593] pnp 00:00: [bus 00-ff]
    [ 0.266598] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.266600] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.266602] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.266604] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.266606] pnp 00:00: [mem 0x000c0000-0x000dffff window]
    [ 0.266609] pnp 00:00: [mem 0x80000000-0xffffffff window]
    [ 0.266662] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
    [ 0.266792] pnp 00:01: [io 0x4100-0x411f]
    [ 0.266794] pnp 00:01: [io 0x0228-0x022f]
    [ 0.266796] pnp 00:01: [io 0x040b]
    [ 0.266798] pnp 00:01: [io 0x04d6]
    [ 0.266799] pnp 00:01: [io 0x0c00-0x0c01]
    [ 0.266801] pnp 00:01: [io 0x0c14]
    [ 0.266803] pnp 00:01: [io 0x0c50-0x0c52]
    [ 0.266805] pnp 00:01: [io 0x0c6c-0x0c6d]
    [ 0.266807] pnp 00:01: [io 0x0c6f]
    [ 0.266808] pnp 00:01: [io 0x0cd0-0x0cd1]
    [ 0.266810] pnp 00:01: [io 0x0cd2-0x0cd3]
    [ 0.266812] pnp 00:01: [io 0x0cd4-0x0cdf]
    [ 0.266814] pnp 00:01: [io 0x4000-0x40fe]
    [ 0.266815] pnp 00:01: [io 0x4210-0x4217]
    [ 0.266817] pnp 00:01: [io 0x0b10-0x0b1f]
    [ 0.266819] pnp 00:01: [mem 0x00000000-0x00000fff window]
    [ 0.266822] pnp 00:01: [mem 0xfee00400-0xfee00fff window]
    [ 0.266828] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.266939] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
    [ 0.267023] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
    [ 0.267131] system 00:01: [io 0x4100-0x411f] has been reserved
    [ 0.267198] system 00:01: [io 0x0228-0x022f] has been reserved
    [ 0.267264] system 00:01: [io 0x040b] has been reserved
    [ 0.267330] system 00:01: [io 0x04d6] has been reserved
    [ 0.267395] system 00:01: [io 0x0c00-0x0c01] has been reserved
    [ 0.267461] system 00:01: [io 0x0c14] has been reserved
    [ 0.267530] system 00:01: [io 0x0c50-0x0c52] has been reserved
    [ 0.267596] system 00:01: [io 0x0c6c-0x0c6d] has been reserved
    [ 0.267662] system 00:01: [io 0x0c6f] has been reserved
    [ 0.267727] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
    [ 0.267793] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
    [ 0.267859] system 00:01: [io 0x0cd4-0x0cdf] has been reserved
    [ 0.267926] system 00:01: [io 0x4000-0x40fe] has been reserved
    [ 0.267992] system 00:01: [io 0x4210-0x4217] has been reserved
    [ 0.268058] system 00:01: [io 0x0b10-0x0b1f] has been reserved
    [ 0.268125] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
    [ 0.268201] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.268290] pnp 00:02: [dma 4]
    [ 0.268291] pnp 00:02: [io 0x0000-0x000f]
    [ 0.268293] pnp 00:02: [io 0x0080-0x0090]
    [ 0.268295] pnp 00:02: [io 0x0094-0x009f]
    [ 0.268297] pnp 00:02: [io 0x00c0-0x00df]
    [ 0.268326] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.268366] pnp 00:03: [irq 0 disabled]
    [ 0.268380] pnp 00:03: [irq 8]
    [ 0.268382] pnp 00:03: [mem 0xfed00000-0xfed003ff]
    [ 0.268408] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.268430] pnp 00:04: [io 0x0070-0x0073]
    [ 0.268456] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.268463] pnp 00:05: [io 0x0061]
    [ 0.268488] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.268495] pnp 00:06: [io 0x00f0-0x00ff]
    [ 0.268504] pnp 00:06: [irq 13]
    [ 0.268535] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.268566] pnp 00:07: [io 0x0010-0x001f]
    [ 0.268567] pnp 00:07: [io 0x0022-0x003f]
    [ 0.268569] pnp 00:07: [io 0x0044-0x005f]
    [ 0.268571] pnp 00:07: [io 0x0062-0x0063]
    [ 0.268573] pnp 00:07: [io 0x0065-0x006f]
    [ 0.268575] pnp 00:07: [io 0x0074-0x007f]
    [ 0.268576] pnp 00:07: [io 0x0091-0x0093]
    [ 0.268578] pnp 00:07: [io 0x00a2-0x00bf]
    [ 0.268580] pnp 00:07: [io 0x00e0-0x00ef]
    [ 0.268582] pnp 00:07: [io 0x04d0-0x04d1]
    [ 0.268632] system 00:07: [io 0x04d0-0x04d1] has been reserved
    [ 0.268699] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.269033] pnp 00:08: [io 0x0060]
    [ 0.269034] pnp 00:08: [io 0x0064]
    [ 0.269043] pnp 00:08: [irq 1]
    [ 0.269080] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 0.269127] pnp 00:09: [mem 0x000f0000-0x000fffff]
    [ 0.269129] pnp 00:09: [mem 0x00000000-0x001fffff]
    [ 0.269131] pnp 00:09: [mem 0xfed00000-0xfed000ff]
    [ 0.269132] pnp 00:09: [mem 0x7fff0000-0x7fffffff]
    [ 0.269134] pnp 00:09: [mem 0xffff0000-0xffffffff]
    [ 0.269136] pnp 00:09: [mem 0x00000000-0x0009ffff]
    [ 0.269138] pnp 00:09: [mem 0x00100000-0x7ffeffff]
    [ 0.269140] pnp 00:09: [mem 0xfec00000-0xfec00fff]
    [ 0.269142] pnp 00:09: [mem 0xfee00000-0xfee00fff]
    [ 0.269144] pnp 00:09: [mem 0xfff80000-0xfffeffff]
    [ 0.269148] pnp 00:09: disabling [mem 0x000f0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.269229] pnp 00:09: disabling [mem 0x00000000-0x001fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.269309] pnp 00:09: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.269390] pnp 00:09: disabling [mem 0x00100000-0x7ffeffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.269519] system 00:09: [mem 0xfed00000-0xfed000ff] has been reserved
    [ 0.269587] system 00:09: [mem 0x7fff0000-0x7fffffff] could not be reserved
    [ 0.269654] system 00:09: [mem 0xffff0000-0xffffffff] has been reserved
    [ 0.269721] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.269788] system 00:09: [mem 0xfee00000-0xfee00fff] could not be reserved
    [ 0.269855] system 00:09: [mem 0xfff80000-0xfffeffff] has been reserved
    [ 0.269922] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.269930] pnp: PnP ACPI: found 10 devices
    [ 0.269994] ACPI: ACPI bus type pnp unregistered
    [ 0.306168] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb01ffff pref]
    [ 0.306245] pci 0000:00:02.0: PCI bridge to [bus 01-01]
    [ 0.306311] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
    [ 0.306378] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
    [ 0.306445] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.306523] pci 0000:02:00.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref]
    [ 0.306598] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
    [ 0.306664] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
    [ 0.306741] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff]
    [ 0.306809] pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
    [ 0.306886] pci 0000:00:14.4: PCI bridge to [bus 03-03]
    [ 0.306952] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
    [ 0.307022] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
    [ 0.307090] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
    [ 0.307175] pci 0000:00:02.0: setting latency timer to 64
    [ 0.307180] pci 0000:00:0a.0: setting latency timer to 64
    [ 0.307188] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.307190] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.307192] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.307194] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
    [ 0.307197] pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff]
    [ 0.307199] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
    [ 0.307201] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
    [ 0.307203] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.307206] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
    [ 0.307208] pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff]
    [ 0.307210] pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
    [ 0.307213] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
    [ 0.307215] pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff]
    [ 0.307217] pci_bus 0000:03: resource 2 [mem 0xfdc00000-0xfdcfffff pref]
    [ 0.307219] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
    [ 0.307222] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
    [ 0.307224] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.307226] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
    [ 0.307228] pci_bus 0000:03: resource 8 [mem 0x80000000-0xffffffff]
    [ 0.307274] NET: Registered protocol family 2
    [ 0.307398] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [ 0.307694] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.308325] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.308652] TCP: Hash tables configured (established 131072 bind 65536)
    [ 0.308719] TCP reno registered
    [ 0.308783] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.308856] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.309050] NET: Registered protocol family 1
    [ 0.426742] pci 0000:01:00.0: Boot video device
    [ 0.426749] PCI: CLS 64 bytes, default 64
    [ 0.426800] Unpacking initramfs...
    [ 0.460291] Freeing initrd memory: 2140k freed
    [ 0.461639] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
    [ 0.461707] apm: disabled - APM is not SMP safe.
    [ 0.461884] audit: initializing netlink socket (disabled)
    [ 0.461957] type=2000 audit(1312207987.459:1): initialized
    [ 0.462290] highmem bounce pool size: 64 pages
    [ 0.462357] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 0.464180] VFS: Disk quotas dquot_6.5.2
    [ 0.464312] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 0.464469] msgmni has been set to 1712
    [ 0.464730] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.464841] io scheduler noop registered
    [ 0.464907] io scheduler deadline registered
    [ 0.464983] io scheduler cfq registered (default)
    [ 0.465152] pcieport 0000:00:02.0: setting latency timer to 64
    [ 0.465180] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
    [ 0.465225] pcieport 0000:00:0a.0: setting latency timer to 64
    [ 0.465246] pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
    [ 0.465393] ERST: Table is not found!
    [ 0.465467] isapnp: Scanning for PnP cards...
    [ 0.822554] isapnp: No Plug & Play device found
    [ 0.822675] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.050031] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    [ 1.050099] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    [ 1.050669] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.050792] mousedev: PS/2 mouse device common for all mice
    [ 1.050892] rtc_cmos 00:04: RTC can wake from S4
    [ 1.074526] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.076767] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    [ 1.076869] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 1.076954] cpuidle: using governor ladder
    [ 1.077018] cpuidle: using governor menu
    [ 1.077281] TCP cubic registered
    [ 1.077345] NET: Registered protocol family 17
    [ 1.077415] Registering the dns_resolver key type
    [ 1.077492] Using IPI No-Shortcut mode
    [ 1.077626] PM: Hibernation image not present or could not be loaded.
    [ 1.077633] registered taskstats version 1
    [ 1.077987] rtc_cmos 00:04: setting system clock to 2011-08-01 14:13:08 UTC (1312207988)
    [ 1.078086] Initializing network drop monitor service
    [ 1.078222] Freeing unused kernel memory: 512k freed
    [ 1.078587] Write protecting the kernel text: 3380k
    [ 1.078672] Write protecting the kernel read-only data: 1028k
    [ 1.088713] udevd[47]: starting version 171
    [ 1.180160] SCSI subsystem initialized
    [ 1.197209] usbcore: registered new interface driver usbfs
    [ 1.197412] usbcore: registered new interface driver hub
    [ 1.197625] usbcore: registered new device driver usb
    [ 1.215729] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.215840] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    [ 1.215930] ehci_hcd 0000:00:13.5: EHCI Host Controller
    [ 1.216028] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
    [ 1.226748] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
    [ 1.226842] ehci_hcd 0000:00:13.5: debug port 1
    [ 1.226937] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000
    [ 1.237087] libata version 3.00 loaded.
    [ 1.240040] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
    [ 1.240292] hub 1-0:1.0: USB hub found
    [ 1.240359] hub 1-0:1.0: 10 ports detected
    [ 1.240733] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 1.241613] scsi0 : pata_atiixp
    [ 1.241804] scsi1 : pata_atiixp
    [ 1.242405] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
    [ 1.242472] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
    [ 1.244130] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 1.244228] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 1.244315] ohci_hcd 0000:00:13.0: OHCI Host Controller
    [ 1.244390] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
    [ 1.250091] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000
    [ 1.307508] hub 2-0:1.0: USB hub found
    [ 1.307579] hub 2-0:1.0: 2 ports detected
    [ 1.307730] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 1.307813] ohci_hcd 0000:00:13.1: OHCI Host Controller
    [ 1.307889] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
    [ 1.326729] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000
    [ 1.384201] hub 3-0:1.0: USB hub found
    [ 1.384274] hub 3-0:1.0: 2 ports detected
    [ 1.384428] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 1.384511] ohci_hcd 0000:00:13.2: OHCI Host Controller
    [ 1.384583] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
    [ 1.405209] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000
    [ 1.460849] hub 4-0:1.0: USB hub found
    [ 1.460923] hub 4-0:1.0: 2 ports detected
    [ 1.461068] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 1.461149] ohci_hcd 0000:00:13.3: OHCI Host Controller
    [ 1.461220] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
    [ 1.480027] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000
    [ 1.537463] hub 5-0:1.0: USB hub found
    [ 1.537533] hub 5-0:1.0: 2 ports detected
    [ 1.537661] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 1.537735] ohci_hcd 0000:00:13.4: OHCI Host Controller
    [ 1.537805] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
    [ 1.553363] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000
    [ 1.610820] hub 6-0:1.0: USB hub found
    [ 1.610890] hub 6-0:1.0: 2 ports detected
    [ 1.611025] ahci 0000:00:12.0: version 3.0
    [ 1.611043] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [ 1.611127] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
    [ 1.611295] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
    [ 1.611377] ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio ccc
    [ 1.612922] scsi2 : ahci
    [ 1.613831] scsi3 : ahci
    [ 1.614815] scsi4 : ahci
    [ 1.614997] scsi5 : ahci
    [ 1.615170] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
    [ 1.615247] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
    [ 1.615324] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
    [ 1.615400] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
    [ 1.933384] ata6: SATA link down (SStatus 0 SControl 300)
    [ 1.933527] ata5: SATA link down (SStatus 0 SControl 300)
    [ 2.063354] usb 6-2: new low speed USB device number 2 using ohci_hcd
    [ 2.106684] ata3: softreset failed (device not ready)
    [ 2.106751] ata3: applying SB600 PMP SRST workaround and retrying
    [ 2.106831] ata4: softreset failed (device not ready)
    [ 2.106897] ata4: applying SB600 PMP SRST workaround and retrying
    [ 2.273373] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.273477] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.275971] ata4.00: ATAPI: HL-DT-ST DVDRAM GH20NS10, EL00, max UDMA/100
    [ 2.276040] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 2.278897] ata3.00: ATA-7: SAMSUNG HD161HJ, JF100-19, max UDMA7
    [ 2.278963] ata3.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
    [ 2.279030] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 2.279635] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 2.279701] ata4.00: configured for UDMA/100
    [ 2.284467] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 2.284533] ata3.00: configured for UDMA/133
    [ 2.284747] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD161HJ JF10 PQ: 0 ANSI: 5
    [ 2.397145] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH20NS10 EL00 PQ: 0 ANSI: 5
    [ 2.407639] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
    [ 2.407755] sd 2:0:0:0: [sda] Write Protect is off
    [ 2.407821] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.407838] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.411375] input: Primax Electronics Wireless Mouse as /devices/pci0000:00/0000:00:13.4/usb6/6-2/6-2:1.0/input/input1
    [ 2.411568] generic-usb 0003:0461:4D25.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [Primax Electronics Wireless Mouse] on usb-0000:00:13.4-2/input0
    [ 2.411669] usbcore: registered new interface driver usbhid
    [ 2.411745] usbhid: USB HID core driver
    [ 2.437927] sda: sda1 sda2 sda3 < sda5 >
    [ 2.438378] sd 2:0:0:0: [sda] Attached SCSI disk
    [ 2.518436] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 2.518516] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.518787] sr 3:0:0:0: Attached scsi CD-ROM sr0
    [ 2.959493] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    [ 4.003984] udevd[255]: starting version 171
    [ 4.140765] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    [ 4.140858] ACPI: Power Button [PWRB]
    [ 4.140981] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 4.141058] ACPI: Power Button [PWRF]
    [ 4.154881] Linux agpgart interface v0.103
    [ 4.157785] ACPI: Fan [FAN] (on)
    [ 4.158635] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
    [ 4.161972] ACPI: acpi_idle registered with cpuidle
    [ 4.162457] SP5100 TCO timer: mmio address 0xfec000f0 already in use
    [ 4.228336] sky2: driver version 1.28
    [ 4.228452] sky2 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 4.228527] sky2 0000:02:00.0: setting latency timer to 64
    [ 4.228555] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 5
    [ 4.228709] sky2 0000:02:00.0: irq 42 for MSI/MSI-X
    [ 4.228991] sky2 0000:02:00.0: eth0: addr 00:50:8d:ba:48:da
    [ 4.232113] input: PC Speaker as /devices/platform/pcspkr/input/input4
    [ 4.250935] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
    [ 4.302867] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
    [ 4.356767] ACPI Warning: For \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference (20110316/nspredef-1059)
    [ 4.356967] ACPI: Expecting a [Reference] package element, found type 0
    [ 4.357033] ACPI: Invalid passive threshold
    [ 4.363965] sd 2:0:0:0: Attached scsi generic sg0 type 0
    [ 4.364111] sr 3:0:0:0: Attached scsi generic sg1 type 5
    [ 4.476288] nvidia: module license 'NVIDIA' taints kernel.
    [ 4.476360] Disabling lock debugging due to kernel taint
    [ 4.556743] thermal LNXTHERM:00: registered as thermal_zone0
    [ 4.556813] ACPI: Thermal Zone [THRM] (44 C)
    [ 4.691172] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 4.775620] hda_codec: ALC888: BIOS auto-probing.
    [ 4.777062] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input5
    [ 4.781547] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
    [ 5.638691] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 5.638769] nvidia 0000:01:00.0: setting latency timer to 64
    [ 5.638774] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    [ 5.639105] NVRM: loading NVIDIA UNIX x86 Kernel Module 275.21 Mon Jul 18 14:37:03 PDT 2011
    [ 5.886530] EXT4-fs (sda5): re-mounted. Opts: (null)
    [ 5.965890] Adding 996024k swap on /dev/sda2. Priority:-1 extents:1 across:996024k
    Last edited by Fuentes (2011-08-16 22:44:13)

    the contents of /home/user/.xsession-errors
    startkde: Starting up...
    Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
    kbuildsycoca4 running...
    kded(920) LayoutMemoryPersister::restoreFromFile: Failed to open layout memory xml file for reading "/home/alvaro/.kde4/share/apps/kded/session/keyboard/layout_memory.xml" error: 5
    kded(920)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
    No outputs have backlight property
    QDBusConnection: name 'org.kde.kglobalaccel' had owner '' but we thought it was ':1.5'
    kded(920) PowerDevilUPowerBackend::brightness: org.kde.powerdevil.backlighthelper.brightness failed
    Object::connect: No such signal QDBusAbstractInterface::Changed()
    Invalid D-BUS member name 'idle-hint' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
    Invalid D-BUS member name 'is-local' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
    Invalid D-BUS member name 'x11-display-device' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
    Invalid D-BUS member name 'x11-display' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
    Invalid D-BUS member name 'display-device' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
    Invalid D-BUS member name 'remote-host-name' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
    Invalid D-BUS member name 'session-type' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
    Invalid D-BUS member name 'unix-user' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
    QDBusObjectPath: invalid path ""
    QDBusObjectPath: invalid path ""
    X Error: BadValue (integer parameter out of range for operation) 2
    Major opcode: 53 (X_CreatePixmap)
    Resource id: 0x0
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Major opcode: 14 (X_GetGeometry)
    Resource id: 0x1e00141
    X Error: BadWindow (invalid Window parameter) 3
    Major opcode: 3 (X_GetWindowAttributes)
    Resource id: 0x8bf31cc
    QPainter::begin: Cannot paint on a null pixmap
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Extension: 152 (RENDER)
    Minor opcode: 4 (RenderCreatePicture)
    Resource id: 0x1e00141
    X Error: BadValue (integer parameter out of range for operation) 2
    Major opcode: 53 (X_CreatePixmap)
    Resource id: 0x0
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Major opcode: 14 (X_GetGeometry)
    Resource id: 0x1e00143
    X Error: BadWindow (invalid Window parameter) 3
    Major opcode: 3 (X_GetWindowAttributes)
    Resource id: 0xb6d1bef4
    QPainter::begin: Cannot paint on a null pixmap
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Extension: 152 (RENDER)
    Minor opcode: 4 (RenderCreatePicture)
    Resource id: 0x1e00143
    X Error: BadValue (integer parameter out of range for operation) 2
    Major opcode: 53 (X_CreatePixmap)
    Resource id: 0x0
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Major opcode: 14 (X_GetGeometry)
    Resource id: 0x1e00145
    X Error: BadWindow (invalid Window parameter) 3
    Major opcode: 3 (X_GetWindowAttributes)
    Resource id: 0xb6d1bef4
    QPainter::begin: Cannot paint on a null pixmap
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Extension: 152 (RENDER)
    Minor opcode: 4 (RenderCreatePicture)
    Resource id: 0x1e00145
    X Error: BadValue (integer parameter out of range for operation) 2
    Major opcode: 53 (X_CreatePixmap)
    Resource id: 0x0
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Major opcode: 14 (X_GetGeometry)
    Resource id: 0x1e00147
    X Error: BadWindow (invalid Window parameter) 3
    Major opcode: 3 (X_GetWindowAttributes)
    Resource id: 0xb6d1bef4
    QPainter::begin: Cannot paint on a null pixmap
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Extension: 152 (RENDER)
    Minor opcode: 4 (RenderCreatePicture)
    Resource id: 0x1e00147
    X Error: BadValue (integer parameter out of range for operation) 2
    Major opcode: 53 (X_CreatePixmap)
    Resource id: 0x0
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Major opcode: 14 (X_GetGeometry)
    Resource id: 0x1e00149
    X Error: BadWindow (invalid Window parameter) 3
    Major opcode: 3 (X_GetWindowAttributes)
    Resource id: 0xb6d1bef4
    QPainter::begin: Cannot paint on a null pixmap
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Extension: 152 (RENDER)
    Minor opcode: 4 (RenderCreatePicture)
    Resource id: 0x1e00149
    X Error: BadValue (integer parameter out of range for operation) 2
    Major opcode: 53 (X_CreatePixmap)
    Resource id: 0x0
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Major opcode: 14 (X_GetGeometry)
    Resource id: 0x1e0014b
    X Error: BadWindow (invalid Window parameter) 3
    Major opcode: 3 (X_GetWindowAttributes)
    Resource id: 0xb6d1bef4
    QPainter::begin: Cannot paint on a null pixmap
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Extension: 152 (RENDER)
    Minor opcode: 4 (RenderCreatePicture)
    Resource id: 0x1e0014b
    X Error: BadValue (integer parameter out of range for operation) 2
    Major opcode: 53 (X_CreatePixmap)
    Resource id: 0x0
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Major opcode: 14 (X_GetGeometry)
    Resource id: 0x1e0014d
    X Error: BadWindow (invalid Window parameter) 3
    Major opcode: 3 (X_GetWindowAttributes)
    Resource id: 0xb6d1bef4
    QPainter::begin: Cannot paint on a null pixmap
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Extension: 152 (RENDER)
    Minor opcode: 4 (RenderCreatePicture)
    Resource id: 0x1e0014d
    X Error: BadValue (integer parameter out of range for operation) 2
    Major opcode: 53 (X_CreatePixmap)
    Resource id: 0x0
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Major opcode: 14 (X_GetGeometry)
    Resource id: 0x1e0014f
    X Error: BadWindow (invalid Window parameter) 3
    Major opcode: 3 (X_GetWindowAttributes)
    Resource id: 0xb6d1bef4
    QPainter::begin: Cannot paint on a null pixmap
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Extension: 152 (RENDER)
    Minor opcode: 4 (RenderCreatePicture)
    Resource id: 0x1e0014f
    Object::connect: No such signal QDBusAbstractInterface::Changed()
    Object::connect: No such signal KWindowSystem::windowChanged(WId,unsigned long*)
    kwin(977): Compositing is not possible
    kwin(977): Compositing is not possible
    kwin(977): Compositing is not possible
    kded(920) PowerDevilUPowerBackend::brightness: org.kde.powerdevil.backlighthelper.brightness failed
    kded(920) PowerDevilUPowerBackend::brightness: org.kde.powerdevil.backlighthelper.brightness failed
    kded(920) PowerDevilUPowerBackend::setBrightness: org.kde.powerdevil.backlighthelper.setbrightness failed
    kded(920) PowerDevilUPowerBackend::setBrightness: org.kde.powerdevil.backlighthelper.setbrightness failed
    QProcess: Destroyed while process is still running.
    plasma-desktop(1001): Communication problem with "plasma-desktop" , it probably crashed.
    Error message was: "org.freedesktop.DBus.Error.Disconnected" : " "Connection was disconnected before a reply was received" "
    kdeinit4: Fatal IO error: client killed
    kdeinit4: sending SIGHUP to children.
    klauncher: Exiting on signal 1
    kglobalaccel: Fatal IO error: client killed
    kdeinit4: Fatal IO error: client killed
    kdeinit4: sending SIGHUP to children.
    ksmserver: Fatal IO error: client killed
    kdeinit4: sending SIGTERM to children.
    kdeinit4: Exit.
    kded4: Fatal IO error: client killed
    kdeinit4: sending SIGTERM to children.
    kdeinit4: Exit.

  • [SOLVED] Xorg freeze with nvidia GeForce 210 when resizing terminal

    Hello,
    I am working on Archlinux. My computer freeze when I resize a terminal window.
    To reproduce the problem, I follow the below steps :
         1- launch openbox (with tint2, xcompmgr and nitrogen)
         2- start the "terminal" console emulator (with true transparent background)
         3- launch opera and go to a website which take a while to load (with a lot of data) (I used http://www.lemonde.fr)
         4- while the website is loading, switch to the terminal window and double click on the title bar to maximize it
         5- the box freeze
    I am not able to take the control back. I cannot exit or kill Xorg / Openbox. I cannot switch to a text terminal (ttyx). No key sequence is working.
    Only a hard reset of the box is working.
    I have tried to disable the transparent background of the terminal window without success.
    I have tried to not start xcompmgr without success.
    The problem also occurs with rxvt-unicode instead of terminal.
    It seems the problem happens more often when using console emulator based on vte.
    vte itself has the same issue.
    The only workaround I have found is to disable the harware acceleration with the below parameter in the xorg.conf file:
    Option    "RenderAccel"    "true"
    The problem with this workaround are poor graphical performances.
    Could you please let me know if you have any idea / clue to identify / fix this problem ?
    Thanks and regards
    uname -a
    Linux myhost 2.6.38-ARCH #1 SMP PREEMPT Fri Apr 22 17:48:36 UTC 2011 i686 Intel(R) Core(TM)2 Duo CPU E7600 @ 3.06GHz GenuineIntel GNU/Linux
    versions
    nvidia 270.41.06-1
    nvidia-utils 270.41.06-1
    kernel26 2.6.38.4-1
    openbox 3.4.11.2-2
    xcompmgr 1.1.5-1
    .xinitrc
    #!/bin/sh
    # ~/.xinitrc
    # Executed by startx (run your window manager from here)
    if [ -d /etc/X11/xinit/xinitrc.d ]; then
    for f in /etc/X11/xinit/xinitrc.d/*; do
    [ -x "$f" ] && . "$f"
    done
    unset f
    fi
    # exec gnome-session
    # exec startkde
    # exec startxfce4
    # ...or the Window Manager of your choice
    exec ck-launch-session openbox-session
    .config/openbox/autostart.sh
    # This shell script is run before Openbox launches.
    # Environment variables set here are passed to the Openbox session.
    # Set a background color
    BG=""
    if which hsetroot >/dev/null 2>&1; then
    BG=hsetroot
    else
    if which esetroot >/dev/null 2>&1; then
    BG=esetroot
    else
    if which xsetroot >/dev/null 2>&1; then
    BG=xsetroot
    fi
    fi
    fi
    test -z $BG || $BG -solid "#303030"
    # D-bus
    if which dbus-launch >/dev/null 2>&1 && test -z "$DBUS_SESSION_BUS_ADDRESS"; then
    eval `dbus-launch --sh-syntax --exit-with-session`
    fi
    # Make GTK apps look and behave how they were set up in the gnome config tools
    if test -x /usr/libexec/gnome-settings-daemon >/dev/null; then
    /usr/libexec/gnome-settings-daemon &
    elif which gnome-settings-daemon >/dev/null 2>&1; then
    gnome-settings-daemon &
    # Make GTK apps look and behave how they were set up in the XFCE config tools
    elif which xfce-mcs-manager >/dev/null 2>&1; then
    xfce-mcs-manager n &
    fi
    # Preload stuff for KDE apps
    if which start_kdeinit >/dev/null 2>&1; then
    LD_BIND_NOW=true start_kdeinit --new-startup +kcminit_startup &
    fi
    # Run XDG autostart things. By default don't run anything desktop-specific
    # See xdg-autostart --help more info
    DESKTOP_ENV="OPENBOX"
    if which /usr/lib/openbox/xdg-autostart >/dev/null 2>&1; then
    /usr/lib/openbox/xdg-autostart $DESKTOP_ENV
    fi
    xcompmgr &
    nitrogen --set-zoom-fill /mnt/data/pictures/flower.jpg &
    tint2 &
    xorg.conf
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc/"
    FontPath "/usr/share/fonts/TTF/"
    FontPath "/usr/share/fonts/OTF/"
    FontPath "/usr/share/fonts/Type1/"
    FontPath "/usr/share/fonts/100dpi/"
    FontPath "/usr/share/fonts/75dpi/"
    EndSection
    Section "Module"
    Load "extmod"
    Load "glx"
    Load "record"
    Load "dbe"
    Load "dri2"
    EndSection
    Section "InputClass"
    Identifier "Keyboard Defaults"
    MatchIsKeyboard "yes"
    Option "XkbLayout" "fr"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Device"
    Identifier "Card0"
    Driver "nvidia"
    Option "RenderAccel" "true"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    SubSection "Display"
    Viewport 0 0
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Section "Extensions"
    Option "Composite" "Enable"
    EndSection
    Xorg.0.log
    [ 485.566]
    X.Org X Server 1.10.1
    Release Date: 2011-04-15
    [ 485.566] X Protocol Version 11, Revision 0
    [ 485.566] Build Operating System: Linux 2.6.38-ARCH i686
    [ 485.566] Current Operating System: Linux myhost 2.6.38-ARCH #1 SMP PREEMPT Fri Apr 22 17:48:36 UTC 2011 i686
    [ 485.566] Kernel command line: root=/dev/sda3 ro
    [ 485.566] Build Date: 16 April 2011 12:05:35PM
    [ 485.566]
    [ 485.566] Current version of pixman: 0.20.2
    [ 485.567] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 485.567] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 485.567] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 27 20:00:28 2011
    [ 485.567] (==) Using config file: "/etc/X11/xorg.conf"
    [ 485.568] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 485.568] (==) ServerLayout "X.org Configured"
    [ 485.568] (**) |-->Screen "Screen0" (0)
    [ 485.568] (**) | |-->Monitor "Monitor0"
    [ 485.568] (**) | |-->Device "Card0"
    [ 485.568] (**) |-->Input Device "Mouse0"
    [ 485.568] (**) |-->Input Device "Keyboard0"
    [ 485.568] (==) Automatically adding devices
    [ 485.568] (==) Automatically enabling devices
    [ 485.568] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 485.568] Entry deleted from font path.
    [ 485.568] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 485.568] Entry deleted from font path.
    [ 485.568] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 485.568] Entry deleted from font path.
    [ 485.568] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 485.568] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 485.568] Entry deleted from font path.
    [ 485.568] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 485.568] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 485.568] Entry deleted from font path.
    [ 485.568] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 485.568] Entry deleted from font path.
    [ 485.568] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 485.568] Entry deleted from font path.
    [ 485.568] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 485.568] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 485.568] Entry deleted from font path.
    [ 485.568] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 485.568] (**) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 485.568] (**) ModulePath set to "/usr/lib/xorg/modules"
    [ 485.568] (**) Extension "Composite" is enabled
    [ 485.568] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 485.568] (WW) Disabling Mouse0
    [ 485.568] (WW) Disabling Keyboard0
    [ 485.568] (II) Loader magic: 0x81f4ee0
    [ 485.568] (II) Module ABI versions:
    [ 485.568] X.Org ANSI C Emulation: 0.4
    [ 485.568] X.Org Video Driver: 10.0
    [ 485.568] X.Org XInput driver : 12.2
    [ 485.568] X.Org Server Extension : 5.0
    [ 485.569] (--) PCI:*(0:1:0:0) 10de:0a65:1043:8334 rev 162, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xce000000/33554432, I/O @ 0x0000bc00/128, BIOS @ 0x????????/524288
    [ 485.569] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 485.569] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    [ 485.569] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    [ 485.569] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [ 485.569] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
    [ 485.569] (II) "dri" will be loaded by default.
    [ 485.569] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
    [ 485.569] (II) LoadModule: "extmod"
    [ 485.569] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 485.569] (II) Module extmod: vendor="X.Org Foundation"
    [ 485.569] compiled for 1.10.1, module version = 1.0.0
    [ 485.569] Module class: X.Org Server Extension
    [ 485.569] ABI class: X.Org Server Extension, version 5.0
    [ 485.569] (II) Loading extension MIT-SCREEN-SAVER
    [ 485.569] (II) Loading extension XFree86-VidModeExtension
    [ 485.569] (II) Loading extension XFree86-DGA
    [ 485.569] (II) Loading extension DPMS
    [ 485.569] (II) Loading extension XVideo
    [ 485.569] (II) Loading extension XVideo-MotionCompensation
    [ 485.569] (II) Loading extension X-Resource
    [ 485.569] (II) LoadModule: "glx"
    [ 485.569] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 485.588] (II) Module glx: vendor="NVIDIA Corporation"
    [ 485.588] compiled for 4.0.2, module version = 1.0.0
    [ 485.589] Module class: X.Org Server Extension
    [ 485.589] (II) NVIDIA GLX Module 270.41.06 Mon Apr 18 15:11:28 PDT 2011
    [ 485.589] (II) Loading extension GLX
    [ 485.589] (II) LoadModule: "record"
    [ 485.589] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 485.589] (II) Module record: vendor="X.Org Foundation"
    [ 485.589] compiled for 1.10.1, module version = 1.13.0
    [ 485.589] Module class: X.Org Server Extension
    [ 485.589] ABI class: X.Org Server Extension, version 5.0
    [ 485.589] (II) Loading extension RECORD
    [ 485.589] (II) LoadModule: "dbe"
    [ 485.589] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 485.589] (II) Module dbe: vendor="X.Org Foundation"
    [ 485.589] compiled for 1.10.1, module version = 1.0.0
    [ 485.589] Module class: X.Org Server Extension
    [ 485.589] ABI class: X.Org Server Extension, version 5.0
    [ 485.589] (II) Loading extension DOUBLE-BUFFER
    [ 485.589] (II) LoadModule: "dri2"
    [ 485.589] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 485.589] (II) Module dri2: vendor="X.Org Foundation"
    [ 485.589] compiled for 1.10.1, module version = 1.2.0
    [ 485.589] ABI class: X.Org Server Extension, version 5.0
    [ 485.589] (II) Loading extension DRI2
    [ 485.589] (II) LoadModule: "dri"
    [ 485.589] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 485.589] (II) Module dri: vendor="X.Org Foundation"
    [ 485.589] compiled for 1.10.1, module version = 1.0.0
    [ 485.589] ABI class: X.Org Server Extension, version 5.0
    [ 485.589] (II) Loading extension XFree86-DRI
    [ 485.589] (II) LoadModule: "nvidia"
    [ 485.589] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 485.590] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 485.590] compiled for 4.0.2, module version = 1.0.0
    [ 485.590] Module class: X.Org Video Driver
    [ 485.590] (II) NVIDIA dlloader X Driver 270.41.06 Mon Apr 18 14:55:51 PDT 2011
    [ 485.590] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 485.590] (--) using VT number 7
    [ 485.593] (II) Loading sub module "fb"
    [ 485.593] (II) LoadModule: "fb"
    [ 485.593] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 485.593] (II) Module fb: vendor="X.Org Foundation"
    [ 485.593] compiled for 1.10.1, module version = 1.0.0
    [ 485.593] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 485.593] (II) Loading sub module "wfb"
    [ 485.593] (II) LoadModule: "wfb"
    [ 485.593] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 485.593] (II) Module wfb: vendor="X.Org Foundation"
    [ 485.593] compiled for 1.10.1, module version = 1.0.0
    [ 485.593] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 485.593] (II) Loading sub module "ramdac"
    [ 485.593] (II) LoadModule: "ramdac"
    [ 485.593] (II) Module "ramdac" already built-in
    [ 485.593] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 485.593] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 485.593] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 485.593] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    [ 485.593] (==) NVIDIA(0): RGB weight 888
    [ 485.593] (==) NVIDIA(0): Default visual is TrueColor
    [ 485.593] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 485.593] (**) NVIDIA(0): Option "RenderAccel" "true"
    [ 485.593] (**) NVIDIA(0): Enabling RENDER acceleration
    [ 485.953] (II) NVIDIA(GPU-0): Display (LG Electronics L222W (CRT-0)) does not support NVIDIA
    [ 485.953] (II) NVIDIA(GPU-0): 3D Vision stereo.
    [ 485.986] (II) NVIDIA(GPU-0): Display (PANASONIC-TV (DFP-1)) does not support NVIDIA 3D
    [ 485.986] (II) NVIDIA(GPU-0): Vision stereo.
    [ 485.987] (II) NVIDIA(0): NVIDIA GPU GeForce 210 (GT218) at PCI:1:0:0 (GPU-0)
    [ 485.987] (--) NVIDIA(0): Memory: 1048576 kBytes
    [ 485.987] (--) NVIDIA(0): VideoBIOS: 70.18.39.00.17
    [ 485.987] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 485.987] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    [ 485.987] (--) NVIDIA(0): Connected display device(s) on GeForce 210 at PCI:1:0:0
    [ 485.987] (--) NVIDIA(0): LG Electronics L222W (CRT-0)
    [ 485.987] (--) NVIDIA(0): PANASONIC-TV (DFP-1)
    [ 485.987] (--) NVIDIA(0): LG Electronics L222W (CRT-0): 400.0 MHz maximum pixel clock
    [ 485.987] (--) NVIDIA(0): PANASONIC-TV (DFP-1): 165.0 MHz maximum pixel clock
    [ 485.987] (--) NVIDIA(0): PANASONIC-TV (DFP-1): Internal Single Link TMDS
    [ 486.026] (II) NVIDIA(0): Assigned Display Device: CRT-0
    [ 486.026] (==) NVIDIA(0):
    [ 486.026] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    [ 486.026] (==) NVIDIA(0): will be used as the requested mode.
    [ 486.026] (==) NVIDIA(0):
    [ 486.026] (II) NVIDIA(0): Validated modes:
    [ 486.026] (II) NVIDIA(0): "nvidia-auto-select"
    [ 486.026] (II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050
    [ 486.054] (--) NVIDIA(0): DPI set to (90, 88); computed from "UseEdidDpi" X config
    [ 486.054] (--) NVIDIA(0): option
    [ 486.054] (--) Depth 24 pixmap format is 32 bpp
    [ 486.054] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
    [ 486.056] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 486.056] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 486.056] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 486.056] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 486.056] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 486.056] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 486.056] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 486.056] (II) NVIDIA(0): Config Options in the README.
    [ 486.058] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
    [ 486.286] (II) Loading extension NV-GLX
    [ 486.314] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 486.314] (==) NVIDIA(0): Backing store disabled
    [ 486.314] (==) NVIDIA(0): Silken mouse enabled
    [ 486.314] (==) NVIDIA(0): DPMS enabled
    [ 486.314] (II) Loading extension NV-CONTROL
    [ 486.315] (II) Loading extension XINERAMA
    [ 486.315] (II) Loading sub module "dri2"
    [ 486.315] (II) LoadModule: "dri2"
    [ 486.315] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 486.315] (II) Module dri2: vendor="X.Org Foundation"
    [ 486.315] compiled for 1.10.1, module version = 1.2.0
    [ 486.315] ABI class: X.Org Server Extension, version 5.0
    [ 486.315] (II) NVIDIA(0): [DRI2] Setup complete
    [ 486.315] (==) RandR enabled
    [ 486.315] (II) Initializing built-in extension Generic Event Extension
    [ 486.315] (II) Initializing built-in extension SHAPE
    [ 486.315] (II) Initializing built-in extension MIT-SHM
    [ 486.315] (II) Initializing built-in extension XInputExtension
    [ 486.315] (II) Initializing built-in extension XTEST
    [ 486.315] (II) Initializing built-in extension BIG-REQUESTS
    [ 486.315] (II) Initializing built-in extension SYNC
    [ 486.315] (II) Initializing built-in extension XKEYBOARD
    [ 486.315] (II) Initializing built-in extension XC-MISC
    [ 486.315] (II) Initializing built-in extension SECURITY
    [ 486.315] (II) Initializing built-in extension XINERAMA
    [ 486.315] (II) Initializing built-in extension XFIXES
    [ 486.315] (II) Initializing built-in extension RENDER
    [ 486.315] (II) Initializing built-in extension RANDR
    [ 486.315] (II) Initializing built-in extension COMPOSITE
    [ 486.315] (II) Initializing built-in extension DAMAGE
    [ 486.317] (II) Initializing extension GLX
    [ 486.364] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 486.364] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 486.364] (**) Power Button: Applying InputClass "Keyboard Defaults"
    [ 486.364] (II) LoadModule: "evdev"
    [ 486.365] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 486.365] (II) Module evdev: vendor="X.Org Foundation"
    [ 486.365] compiled for 1.10.0, module version = 2.6.0
    [ 486.365] Module class: X.Org XInput Driver
    [ 486.365] ABI class: X.Org XInput driver, version 12.2
    [ 486.365] (II) Using input driver 'evdev' for 'Power Button'
    [ 486.365] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 486.365] (**) Power Button: always reports core events
    [ 486.365] (**) Power Button: Device: "/dev/input/event1"
    [ 486.376] (--) Power Button: Found keys
    [ 486.376] (II) Power Button: Configuring as keyboard
    [ 486.376] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
    [ 486.376] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 486.376] (**) Option "xkb_rules" "evdev"
    [ 486.376] (**) Option "xkb_model" "evdev"
    [ 486.376] (**) Option "xkb_layout" "fr"
    [ 486.397] (II) config/udev: Adding input device Power Button (/dev/input/event0)
    [ 486.397] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 486.397] (**) Power Button: Applying InputClass "Keyboard Defaults"
    [ 486.397] (II) Using input driver 'evdev' for 'Power Button'
    [ 486.397] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 486.397] (**) Power Button: always reports core events
    [ 486.397] (**) Power Button: Device: "/dev/input/event0"
    [ 486.413] (--) Power Button: Found keys
    [ 486.413] (II) Power Button: Configuring as keyboard
    [ 486.413] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
    [ 486.413] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 486.413] (**) Option "xkb_rules" "evdev"
    [ 486.413] (**) Option "xkb_model" "evdev"
    [ 486.413] (**) Option "xkb_layout" "fr"
    [ 486.415] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event2)
    [ 486.415] (II) No input driver/identifier specified (ignoring)
    [ 486.418] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event3)
    [ 486.418] (**) Microsoft Wired Keyboard 600: Applying InputClass "evdev keyboard catchall"
    [ 486.418] (**) Microsoft Wired Keyboard 600: Applying InputClass "Keyboard Defaults"
    [ 486.418] (II) Using input driver 'evdev' for 'Microsoft Wired Keyboard 600'
    [ 486.418] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 486.418] (**) Microsoft Wired Keyboard 600: always reports core events
    [ 486.418] (**) Microsoft Wired Keyboard 600: Device: "/dev/input/event3"
    [ 486.430] (--) Microsoft Wired Keyboard 600: Found keys
    [ 486.430] (II) Microsoft Wired Keyboard 600: Configuring as keyboard
    [ 486.430] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb9/9-1/9-1:1.0/input/input3/event3"
    [ 486.430] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD)
    [ 486.430] (**) Option "xkb_rules" "evdev"
    [ 486.430] (**) Option "xkb_model" "evdev"
    [ 486.430] (**) Option "xkb_layout" "fr"
    [ 486.430] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event4)
    [ 486.430] (**) Microsoft Wired Keyboard 600: Applying InputClass "evdev keyboard catchall"
    [ 486.430] (**) Microsoft Wired Keyboard 600: Applying InputClass "Keyboard Defaults"
    [ 486.430] (II) Using input driver 'evdev' for 'Microsoft Wired Keyboard 600'
    [ 486.430] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 486.430] (**) Microsoft Wired Keyboard 600: always reports core events
    [ 486.430] (**) Microsoft Wired Keyboard 600: Device: "/dev/input/event4"
    [ 486.446] (--) Microsoft Wired Keyboard 600: Found 1 mouse buttons
    [ 486.446] (--) Microsoft Wired Keyboard 600: Found scroll wheel(s)
    [ 486.446] (--) Microsoft Wired Keyboard 600: Found relative axes
    [ 486.446] (--) Microsoft Wired Keyboard 600: Found absolute axes
    [ 486.446] (--) Microsoft Wired Keyboard 600: Found x and y absolute axes
    [ 486.446] (--) Microsoft Wired Keyboard 600: Found keys
    [ 486.446] (II) Microsoft Wired Keyboard 600: Configuring as mouse
    [ 486.446] (II) Microsoft Wired Keyboard 600: Configuring as keyboard
    [ 486.446] (II) Microsoft Wired Keyboard 600: Adding scrollwheel support
    [ 486.446] (**) Microsoft Wired Keyboard 600: YAxisMapping: buttons 4 and 5
    [ 486.446] (**) Microsoft Wired Keyboard 600: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 486.446] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb9/9-1/9-1:1.1/input/input4/event4"
    [ 486.446] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD)
    [ 486.446] (**) Option "xkb_rules" "evdev"
    [ 486.446] (**) Option "xkb_model" "evdev"
    [ 486.446] (**) Option "xkb_layout" "fr"
    [ 486.447] (EE) Microsoft Wired Keyboard 600: failed to initialize for relative axes.
    [ 486.447] (WW) Microsoft Wired Keyboard 600: found 37 axes, limiting to 36.
    [ 486.447] (II) Microsoft Wired Keyboard 600: initialized for absolute axes.
    [ 486.447] (**) Microsoft Wired Keyboard 600: (accel) keeping acceleration scheme 1
    [ 486.447] (**) Microsoft Wired Keyboard 600: (accel) acceleration profile 0
    [ 486.447] (**) Microsoft Wired Keyboard 600: (accel) acceleration factor: 2.000
    [ 486.447] (**) Microsoft Wired Keyboard 600: (accel) acceleration threshold: 4
    [ 486.447] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/js0)
    [ 486.447] (**) Microsoft Wired Keyboard 600: Applying InputClass "Keyboard Defaults"
    [ 486.447] (II) No input driver/identifier specified (ignoring)
    [ 486.447] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event5)
    [ 486.447] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
    [ 486.447] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
    [ 486.447] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 486.447] (**) Logitech USB Optical Mouse: always reports core events
    [ 486.447] (**) Logitech USB Optical Mouse: Device: "/dev/input/event5"
    [ 486.473] (--) Logitech USB Optical Mouse: Found 12 mouse buttons
    [ 486.473] (--) Logitech USB Optical Mouse: Found scroll wheel(s)
    [ 486.473] (--) Logitech USB Optical Mouse: Found relative axes
    [ 486.473] (--) Logitech USB Optical Mouse: Found x and y relative axes
    [ 486.473] (II) Logitech USB Optical Mouse: Configuring as mouse
    [ 486.473] (II) Logitech USB Optical Mouse: Adding scrollwheel support
    [ 486.473] (**) Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
    [ 486.473] (**) Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 486.473] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb9/9-2/9-2:1.0/input/input5/event5"
    [ 486.473] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE)
    [ 486.473] (II) Logitech USB Optical Mouse: initialized for relative axes.
    [ 486.473] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
    [ 486.473] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
    [ 486.473] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
    [ 486.473] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
    [ 486.473] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
    [ 486.473] (II) No input driver/identifier specified (ignoring)
    [ 525.530] (WW) NVIDIA(0): The NVIDIA X driver has encountered too many errors. Falling
    [ 525.530] (WW) NVIDIA(0): back to write-back cached memory.
    dmesg.txt
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 2.6.38-ARCH (tobias@T-POWA-LX) (gcc version 4.6.0 20110415 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Apr 22 17:48:36 UTC 2011
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
    [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff90000 (usable)
    [ 0.000000] BIOS-e820: 000000007ff90000 - 000000007ff9e000 (ACPI data)
    [ 0.000000] BIOS-e820: 000000007ff9e000 - 000000007ffe0000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] DMI 2.4 present.
    [ 0.000000] DMI: System manufacturer System Product Name/P5B-Deluxe, BIOS 1238 09/30/2008
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] last_pfn = 0x7ff90 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-DFFFF uncachable
    [ 0.000000] E0000-EFFFF write-through
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 disabled
    [ 0.000000] 2 disabled
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [c00ff780] ff780
    [ 0.000000] initial memory mapped : 0 - 01800000
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
    [ 0.000000] 0000000000 - 0000400000 page 4k
    [ 0.000000] 0000400000 - 0037400000 page 2M
    [ 0.000000] 0037400000 - 00377fe000 page 4k
    [ 0.000000] kernel direct mapping tables up to 377fe000 @ 17fb000-1800000
    [ 0.000000] RAMDISK: 7fdd0000 - 7ff80000
    [ 0.000000] Allocated new RAMDISK: 3764e000 - 377fd262
    [ 0.000000] Move RAMDISK from 000000007fdd0000 - 000000007ff7f261 to 3764e000 - 377fd261
    [ 0.000000] ACPI: RSDP 000fae70 00024 (v02 ACPIAM)
    [ 0.000000] ACPI: XSDT 7ff90100 0004C (v01 MSTEST OEMXSDT 09000830 MSFT 00000097)
    [ 0.000000] ACPI: FACP 7ff90290 000F4 (v03 MSTEST OEMFACP 09000830 MSFT 00000097)
    [ 0.000000] ACPI: DSDT 7ff905c0 0918E (v01 A0483 A0483035 00000035 INTL 20060113)
    [ 0.000000] ACPI: FACS 7ff9e000 00040
    [ 0.000000] ACPI: APIC 7ff90390 0006C (v01 MSTEST OEMAPIC 09000830 MSFT 00000097)
    [ 0.000000] ACPI: MCFG 7ff90400 0003C (v01 MSTEST OEMMCFG 09000830 MSFT 00000097)
    [ 0.000000] ACPI: OEMB 7ff9e040 0007B (v01 MSTEST AMI_OEM 09000830 MSFT 00000097)
    [ 0.000000] ACPI: HPET 7ff99750 00038 (v01 MSTEST OEMHPET 09000830 MSFT 00000097)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 1159MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] Normal 0x00001000 -> 0x000377fe
    [ 0.000000] HighMem 0x000377fe -> 0x0007ff90
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[2] active PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009e
    [ 0.000000] 0: 0x00000100 -> 0x0007ff90
    [ 0.000000] On node 0 totalpages: 524062
    [ 0.000000] free_area_init_node: node 0, pgdat c1450b00, node_mem_map f664d200
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3950 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 2320 pages used for memmap
    [ 0.000000] HighMem zone: 294530 pages, LIFO batch:31
    [ 0.000000] Using APIC driver default
    [ 0.000000] ACPI: PM-Timer IO Port: 0x808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a202 base: 0xfed00000
    [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
    [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
    [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 12 pages/cpu @f6000000 s27392 r0 d21760 u1048576
    [ 0.000000] pcpu-alloc: s27392 r0 d21760 u1048576 alloc=1*4194304
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519966
    [ 0.000000] Kernel command line: root=/dev/sda3 ro
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Initializing CPU#0
    [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
    [ 0.000000] allocated 10483200 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Initializing HighMem for node 0 (000377fe:0007ff90)
    [ 0.000000] Memory: 2061020k/2096704k available (3182k kernel code, 35228k reserved, 1259k data, 424k init, 1187400k highmem)
    [ 0.000000] virtual kernel memory layout:
    [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    [ 0.000000] .init : 0xc1457000 - 0xc14c1000 ( 424 kB)
    [ 0.000000] .data : 0xc131bacb - 0xc1456a00 (1259 kB)
    [ 0.000000] .text : 0xc1000000 - 0xc131bacb (3182 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptable hierarchical RCU implementation.
    [ 0.000000] RCU-based detection of stalled CPUs is disabled.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:512
    [ 0.000000] CPU 0 irqstacks, hard=f500c000 soft=f500e000
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 3066.221 MHz processor.
    [ 0.003336] Calibrating delay loop (skipped), value calculated using timer frequency.. 6134.96 BogoMIPS (lpj=10220736)
    [ 0.003418] pid_max: default: 32768 minimum: 301
    [ 0.003486] Security Framework initialized
    [ 0.003528] AppArmor: AppArmor disabled by boot time parameter
    [ 0.006682] Mount-cache hash table entries: 512
    [ 0.006865] Initializing cgroup subsys ns
    [ 0.006906] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
    [ 0.006960] Initializing cgroup subsys cpuacct
    [ 0.007007] Initializing cgroup subsys memory
    [ 0.007052] Initializing cgroup subsys devices
    [ 0.007092] Initializing cgroup subsys freezer
    [ 0.007133] Initializing cgroup subsys net_cls
    [ 0.007172] Initializing cgroup subsys blkio
    [ 0.007238] CPU: Physical Processor ID: 0
    [ 0.007277] CPU: Processor Core ID: 0
    [ 0.007317] mce: CPU supports 6 MCE banks
    [ 0.007361] CPU0: Thermal monitoring enabled (TM2)
    [ 0.007402] using mwait in idle threads.
    [ 0.008216] ACPI: Core revision 20110112
    [ 0.013386] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.013726] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.046907] CPU0: Intel(R) Core(TM)2 Duo CPU E7600 @ 3.06GHz stepping 0a
    [ 0.049997] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    [ 0.049997] ... version: 2
    [ 0.049997] ... bit width: 40
    [ 0.049997] ... generic registers: 2
    [ 0.049997] ... value mask: 000000ffffffffff
    [ 0.049997] ... max period: 000000007fffffff
    [ 0.049997] ... fixed-purpose events: 3
    [ 0.049997] ... event mask: 0000000700000003
    [ 0.056745] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.070012] CPU 1 irqstacks, hard=f50d6000 soft=f50d8000
    [ 0.070017] Booting Node 0, Processors #1
    [ 0.006666] Initializing CPU#1
    [ 0.166676] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.169997] Brought up 2 CPUs
    [ 0.170040] Total of 2 processors activated (12270.81 BogoMIPS).
    [ 0.171248] devtmpfs: initialized
    [ 0.171248] NET: Registered protocol family 16
    [ 0.171248] ACPI: bus type pci registered
    [ 0.171248] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.171248] PCI: not using MMCONFIG
    [ 0.171248] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
    [ 0.171248] PCI: Using configuration type 1 for base access
    [ 0.171248] bio: create slab <bio-0> at 0
    [ 0.173388] ACPI: EC: Look up EC in DSDT
    [ 0.174194] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.179022] ACPI: SSDT 7ff9e0c0 00208 (v01 AMI CPU1PM 00000001 INTL 20060113)
    [ 0.179316] ACPI: Dynamic OEM Table Load:
    [ 0.179408] ACPI: SSDT (null) 00208 (v01 AMI CPU1PM 00000001 INTL 20060113)
    [ 0.179643] ACPI: SSDT 7ff9e2d0 0013A (v01 AMI CPU2PM 00000001 INTL 20060113)
    [ 0.179932] ACPI: Dynamic OEM Table Load:
    [ 0.180025] ACPI: SSDT (null) 0013A (v01 AMI CPU2PM 00000001 INTL 20060113)
    [ 0.180248] ACPI: Interpreter enabled
    [ 0.180292] ACPI: (supports S0 S3 S4 S5)
    [ 0.180445] ACPI: Using IOAPIC for interrupt routing
    [ 0.180500] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.180904] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    [ 0.180958] PCI: Using MMCONFIG for extended config space
    [ 0.185933] ACPI: No dock devices found.
    [ 0.185973] HEST: Table not found.
    [ 0.186014] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.186114] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.186260] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.186304] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 0.186346] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.186398] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
    [ 0.186450] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xffffffff]
    [ 0.186509] pci 0000:00:00.0: [8086:29a0] type 0 class 0x000600
    [ 0.186539] pci 0000:00:01.0: [8086:29a1] type 1 class 0x000604
    [ 0.186562] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.186564] pci 0000:00:01.0: PME# disabled
    [ 0.186592] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
    [ 0.186625] pci 0000:00:1a.0: reg 20: [io 0xa880-0xa89f]
    [ 0.186660] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
    [ 0.186692] pci 0000:00:1a.1: reg 20: [io 0xac00-0xac1f]
    [ 0.186724] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
    [ 0.186740] pci 0000:00:1a.7: reg 10: [mem 0xf9fffc00-0xf9ffffff]
    [ 0.186797] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [ 0.186801] pci 0000:00:1a.7: PME# disabled
    [ 0.186817] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
    [ 0.186829] pci 0000:00:1b.0: reg 10: [mem 0xf9ff8000-0xf9ffbfff 64bit]
    [ 0.186873] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.186876] pci 0000:00:1b.0: PME# disabled
    [ 0.186891] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
    [ 0.186935] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.186938] pci 0000:00:1c.0: PME# disabled
    [ 0.186956] pci 0000:00:1c.4: [8086:2847] type 1 class 0x000604
    [ 0.187000] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.187003] pci 0000:00:1c.4: PME# disabled
    [ 0.187019] pci 0000:00:1c.5: [8086:2849] type 1 class 0x000604
    [ 0.187063] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 0.187066] pci 0000:00:1c.5: PME# disabled
    [ 0.187082] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
    [ 0.187114] pci 0000:00:1d.0: reg 20: [io 0xa400-0xa41f]
    [ 0.187137] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
    [ 0.187170] pci 0000:00:1d.1: reg 20: [io 0xa480-0xa49f]
    [ 0.187193] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
    [ 0.187226] pci 0000:00:1d.2: reg 20: [io 0xa800-0xa81f]
    [ 0.187256] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
    [ 0.187272] pci 0000:00:1d.7: reg 10: [mem 0xf9fff800-0xf9fffbff]
    [ 0.187329] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.187333] pci 0000:00:1d.7: PME# disabled
    [ 0.187346] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
    [ 0.187393] pci 0000:00:1f.0: [8086:2810] type 0 class 0x000601
    [ 0.187462] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
    [ 0.188664] pci 0000:00:1f.2: [8086:2821] type 0 class 0x000106
    [ 0.188677] pci 0000:00:1f.2: reg 10: [io 0xa080-0xa087]
    [ 0.188684] pci 0000:00:1f.2: reg 14: [io 0xa000-0xa003]
    [ 0.188690] pci 0000:00:1f.2: reg 18: [io 0x9c00-0x9c07]
    [ 0.188696] pci 0000:00:1f.2: reg 1c: [io 0x9880-0x9883]
    [ 0.188703] pci 0000:00:1f.2: reg 20: [io 0x9800-0x981f]
    [ 0.188709] pci 0000:00:1f.2: reg 24: [mem 0xf9fff000-0xf9fff7ff]
    [ 0.188733] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.188736] pci 0000:00:1f.2: PME# disabled
    [ 0.188747] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
    [ 0.188756] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff]
    [ 0.188778] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
    [ 0.188824] pci 0000:01:00.0: [10de:0a65] type 0 class 0x000300
    [ 0.188832] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
    [ 0.188841] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.188849] pci 0000:01:00.0: reg 1c: [mem 0xce000000-0xcfffffff 64bit pref]
    [ 0.188856] pci 0000:01:00.0: reg 24: [io 0xbc00-0xbc7f]
    [ 0.188862] pci 0000:01:00.0: reg 30: [mem 0xfbc00000-0xfbc7ffff pref]
    [ 0.188895] pci 0000:01:00.1: [10de:0be3] type 0 class 0x000403
    [ 0.188903] pci 0000:01:00.1: reg 10: [mem 0xfbcfc000-0xfbcfffff]
    [ 0.188969] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.189011] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
    [ 0.189014] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfbcfffff]
    [ 0.189017] pci 0000:00:01.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
    [ 0.189048] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
    [ 0.189091] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.189094] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    [ 0.189098] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
    [ 0.189144] pci 0000:03:00.0: [197b:2363] type 0 class 0x000101
    [ 0.189223] pci 0000:03:00.0: reg 24: [mem 0xfbefe000-0xfbefffff]
    [ 0.189236] pci 0000:03:00.0: reg 30: [mem 0xfbee0000-0xfbeeffff pref]
    [ 0.189263] pci 0000:03:00.0: PME# supported from D3hot
    [ 0.189268] pci 0000:03:00.0: PME# disabled
    [ 0.189293] pci 0000:03:00.1: [197b:2363] type 0 class 0x000101
    [ 0.189315] pci 0000:03:00.1: reg 10: [io 0xdc00-0xdc07]
    [ 0.189327] pci 0000:03:00.1: reg 14: [io 0xd880-0xd883]
    [ 0.189339] pci 0000:03:00.1: reg 18: [io 0xd800-0xd807]
    [ 0.189351] pci 0000:03:00.1: reg 1c: [io 0xd480-0xd483]
    [ 0.189363] pci 0000:03:00.1: reg 20: [io 0xd400-0xd40f]
    [ 0.189426] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    [ 0.189491] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
    [ 0.189533] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
    [ 0.189536] pci 0000:00:1c.4: bridge window [mem 0xfbe00000-0xfbefffff]
    [ 0.189540] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.189589] pci 0000:02:00.0: [11ab:4364] type 0 class 0x000200
    [ 0.189609] pci 0000:02:00.0: reg 10: [mem 0xfbdfc000-0xfbdfffff 64bit]
    [ 0.189620] pci 0000:02:00.0: reg 18: [io 0xc800-0xc8ff]
    [ 0.189658] pci 0000:02:00.0: reg 30: [mem 0xfbdc0000-0xfbddffff pref]
    [ 0.189693] pci 0000:02:00.0: supports D1 D2
    [ 0.189694] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.189698] pci 0000:02:00.0: PME# disabled
    [ 0.193338] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
    [ 0.193385] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
    [ 0.193390] pci 0000:00:1c.5: bridge window [mem 0xfbd00000-0xfbdfffff]
    [ 0.193397] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.193434] pci 0000:05:02.0: [1033:0035] type 0 class 0x000c03
    [ 0.193452] pci 0000:05:02.0: reg 10: [mem 0xfbffd000-0xfbffdfff]
    [ 0.193514] pci 0000:05:02.0: supports D1 D2
    [ 0.193516] pci 0000:05:02.0: PME# supported from D0 D1 D2 D3hot
    [ 0.193519] pci 0000:05:02.0: PME# disabled
    [ 0.193533] pci 0000:05:02.1: [1033:0035] type 0 class 0x000c03
    [ 0.193546] pci 0000:05:02.1: reg 10: [mem 0xfbffe000-0xfbffefff]
    [ 0.193601] pci 0000:05:02.1: supports D1 D2
    [ 0.193602] pci 0000:05:02.1: PME# supported from D0 D1 D2 D3hot
    [ 0.193605] pci 0000:05:02.1: PME# disabled
    [ 0.193619] pci 0000:05:02.2: [1033:00e0] type 0 class 0x000c03
    [ 0.193633] pci 0000:05:02.2: reg 10: [mem 0xfbfffc00-0xfbfffcff]
    [ 0.193687] pci 0000:05:02.2: supports D1 D2
    [ 0.193689] pci 0000:05:02.2: PME# supported from D0 D1 D2 D3hot
    [ 0.193692] pci 0000:05:02.2: PME# disabled
    [ 0.193711] pci 0000:05:03.0: [104c:8023] type 0 class 0x000c00
    [ 0.193726] pci 0000:05:03.0: reg 10: [mem 0xfbfff000-0xfbfff7ff]
    [ 0.193735] pci 0000:05:03.0: reg 14: [mem 0xfbff8000-0xfbffbfff]
    [ 0.193786] pci 0000:05:03.0: supports D1 D2
    [ 0.193787] pci 0000:05:03.0: PME# supported from D0 D1 D2 D3hot
    [ 0.193791] pci 0000:05:03.0: PME# disabled
    [ 0.193806] pci 0000:05:04.0: [11ab:4320] type 0 class 0x000200
    [ 0.193823] pci 0000:05:04.0: reg 10: [mem 0xfbff4000-0xfbff7fff]
    [ 0.193831] pci 0000:05:04.0: reg 14: [io 0xe800-0xe8ff]
    [ 0.193867] pci 0000:05:04.0: reg 30: [mem 0xfbfc0000-0xfbfdffff pref]
    [ 0.193886] pci 0000:05:04.0: supports D1 D2
    [ 0.193888] pci 0000:05:04.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.193891] pci 0000:05:04.0: PME# disabled
    [ 0.193926] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
    [ 0.193971] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
    [ 0.193974] pci 0000:00:1e.0: bridge window [mem 0xfbf00000-0xfbffffff]
    [ 0.193978] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.193980] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.193982] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.193983] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.193985] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
    [ 0.193987] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
    [ 0.194003] pci_bus 0000:00: on NUMA node 0
    [ 0.194005] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.194127] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
    [ 0.194156] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
    [ 0.194243] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
    [ 0.194277] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
    [ 0.194313] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
    [ 0.194355] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.199969] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    [ 0.200342] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    [ 0.200724] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    [ 0.201105] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
    [ 0.201486] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    [ 0.201868] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
    [ 0.202249] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
    [ 0.202634] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
    [ 0.203051] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.203107] vgaarb: loaded
    [ 0.203206] PCI: Using ACPI for IRQ routing
    [ 0.203247] PCI: pci_cache_line_size set to 64 bytes
    [ 0.203358] reserve RAM buffer: 000000000009ec00 - 000000000009ffff
    [ 0.203360] reserve RAM buffer: 000000007ff90000 - 000000007fffffff
    [ 0.203439] NetLabel: Initializing
    [ 0.203478] NetLabel: domain hash size = 128
    [ 0.203518] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.203565] NetLabel: unlabeled traffic allowed by default
    [ 0.203608] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    [ 0.203653] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 0.203797] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    [ 0.210012] Switching to clocksource hpet
    [ 0.211034] pnp: PnP ACPI init
    [ 0.211084] ACPI: bus type pnp registered
    [ 0.211173] pnp 00:00: [bus 00-ff]
    [ 0.211175] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.211177] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.211179] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.211180] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.211182] pnp 00:00: [mem 0x000d0000-0x000dffff window]
    [ 0.211184] pnp 00:00: [mem 0x80000000-0xffffffff window]
    [ 0.211222] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.211229] pnp 00:01: [mem 0xfed14000-0xfed19fff]
    [ 0.211267] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
    [ 0.211311] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.211335] pnp 00:02: [dma 4]
    [ 0.211337] pnp 00:02: [io 0x0000-0x000f]
    [ 0.211338] pnp 00:02: [io 0x0081-0x0083]
    [ 0.211339] pnp 00:02: [io 0x0087]
    [ 0.211341] pnp 00:02: [io 0x0089-0x008b]
    [ 0.211342] pnp 00:02: [io 0x008f]
    [ 0.211343] pnp 00:02: [io 0x00c0-0x00df]
    [ 0.211367] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.211374] pnp 00:03: [io 0x0070-0x0071]
    [ 0.211380] pnp 00:03: [irq 8]
    [ 0.211403] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.211412] pnp 00:04: [io 0x0061]
    [ 0.211435] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.211441] pnp 00:05: [io 0x00f0-0x00ff]
    [ 0.211444] pnp 00:05: [irq 13]
    [ 0.211469] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.211669] pnp 00:06: [irq 4]
    [ 0.211671] pnp 00:06: [dma 0 disabled]
    [ 0.211672] pnp 00:06: [io 0x03f8-0x03ff]
    [ 0.211721] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.211835] pnp 00:07: [io 0x0000-0xffffffff disabled]
    [ 0.211837] pnp 00:07: [io 0x0000-0xffffffff disabled]
    [ 0.211838] pnp 00:07: [io 0x0290-0x0297]
    [ 0.211879] system 00:07: [io 0x0290-0x0297] has been reserved
    [ 0.211922] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.211997] pnp 00:08: [io 0x0010-0x001f]
    [ 0.211999] pnp 00:08: [io 0x0022-0x003f]
    [ 0.212000] pnp 00:08: [io 0x0044-0x005f]
    [ 0.212002] pnp 00:08: [io 0x0062-0x0063]
    [ 0.212003] pnp 00:08: [io 0x0065-0x006f]
    [ 0.212004] pnp 00:08: [io 0x0072-0x007f]
    [ 0.212006] pnp 00:08: [io 0x0080]
    [ 0.212007] pnp 00:08: [io 0x0084-0x0086]
    [ 0.212008] pnp 00:08: [io 0x0088]
    [ 0.212010] pnp 00:08: [io 0x008c-0x008e]
    [ 0.212011] pnp 00:08: [io 0x0090-0x009f]
    [ 0.212012] pnp 00:08: [io 0x00a2-0x00bf]
    [ 0.212014] pnp 00:08: [io 0x00e0-0x00ef]
    [ 0.212015] pnp 00:08: [io 0x04d0-0x04d1]
    [ 0.212016] pnp 00:08: [io 0x0800-0x087f]
    [ 0.212018] pnp 00:08: [io 0x0400-0x03ff disabled]
    [ 0.212019] pnp 00:08: [io 0x0480-0x04bf]
    [ 0.212021] pnp 00:08: [mem 0xffafe000-0xffb0cbff]
    [ 0.212022] pnp 00:08: [mem 0xffb00000-0xffbfffff]
    [ 0.212024] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
    [ 0.212025] pnp 00:08: [mem 0xfed20000-0xfed8ffff]
    [ 0.212026] pnp 00:08: [mem 0xfff00000-0xfffffffe]
    [ 0.212028] pnp 00:08: [mem 0xfebfe000-0xfebfec00]
    [ 0.212089] system 00:08: [io 0x04d0-0x04d1] has been reserved
    [ 0.212132] system 00:08: [io 0x0800-0x087f] has been reserved
    [ 0.212174] system 00:08: [io 0x0480-0x04bf] has been reserved
    [ 0.212216] system 00:08: [mem 0xffafe000-0xffb0cbff] could not be reserved
    [ 0.212259] system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved
    [ 0.212302] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.212345] system 00:08: [mem 0xfed20000-0xfed8ffff] has been reserved
    [ 0.212388] system 00:08: [mem 0xfff00000-0xfffffffe] has been reserved
    [ 0.212430] system 00:08: [mem 0xfebfe000-0xfebfec00] has been reserved
    [ 0.212473] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.212521] pnp 00:09: [mem 0xfed00000-0xfed003ff]
    [ 0.212547] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.212580] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
    [ 0.212581] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
    [ 0.212625] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.212668] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.212712] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.212761] pnp 00:0b: [mem 0xe0000000-0xefffffff]
    [ 0.212801] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.212844] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.212967] pnp 00:0c: [mem 0x00000000-0x0009ffff]
    [ 0.212969] pnp 00:0c: [mem 0x000c0000-0x000cffff]
    [ 0.212971] pnp 00:0c: [mem 0x000e0000-0x000fffff]
    [ 0.212972] pnp 00:0c: [mem 0x00100000-0x7fffffff]
    [ 0.212974] pnp 00:0c: [mem 0x00000000-0xffffffff disabled]
    [ 0.213025] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
    [ 0.213068] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
    [ 0.213111] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
    [ 0.213154] system 00:0c: [mem 0x00100000-0x7fffffff] could not be reserved
    [ 0.213198] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.213198] Switched to NOHz mode on CPU #0
    [ 0.213237] Switched to NOHz mode on CPU #1
    [ 0.213286] pnp: PnP ACPI: found 13 devices
    [ 0.213326] ACPI: ACPI bus type pnp unregistered
    [ 0.249481] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x803fffff]
    [ 0.249526] pci 0000:00:1c.4: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
    [ 0.249579] pci 0000:00:1c.5: BAR 15: assigned [mem 0x80600000-0x807fffff 64bit pref]
    [ 0.249632] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
    [ 0.249675] pci 0000:00:1f.3: BAR 0: assigned [mem 0x80800000-0x808000ff]
    [ 0.249720] pci 0000:00:1f.3: BAR 0: set to [mem 0x80800000-0x808000ff] (PCI address [0x80800000-0x808000ff])
    [ 0.249775] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.249816] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
    [ 0.249859] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfbcfffff]
    [ 0.249902] pci 0000:00:01.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
    [ 0.249956] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
    [ 0.250011] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
    [ 0.250055] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x803fffff]
    [ 0.250099] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
    [ 0.250154] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
    [ 0.250195] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
    [ 0.250239] pci 0000:00:1c.4: bridge window [mem 0xfbe00000-0xfbefffff]
    [ 0.250283] pci 0000:00:1c.4: bridge window [mem 0x80400000-0x805fffff 64bit pref]
    [ 0.250338] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
    [ 0.250380] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
    [ 0.250424] pci 0000:00:1c.5: bridge window [mem 0xfbd00000-0xfbdfffff]
    [ 0.250468] pci 0000:00:1c.5: bridge window [mem 0x80600000-0x807fffff 64bit pref]
    [ 0.250523] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
    [ 0.250565] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
    [ 0.250609] pci 0000:00:1e.0: bridge window [mem 0xfbf00000-0xfbffffff]
    [ 0.250653] pci 0000:00:1e.0: bridge window [mem pref disabled]
    [ 0.250702] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.250746] pci 0000:00:01.0: setting latency timer to 64
    [ 0.250750] pci 0000:00:1c.0: enabling device (0106 -> 0107)
    [ 0.250792] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.250836] pci 0000:00:1c.0: setting latency timer to 64
    [ 0.250840] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.250884] pci 0000:00:1c.4: setting latency timer to 64
    [ 0.250890] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 0.250933] pci 0000:00:1c.5: setting latency timer to 64
    [ 0.250938] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.250941] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.250943] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.250944] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.250946] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
    [ 0.250948] pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff]
    [ 0.250949] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
    [ 0.250951] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfbcfffff]
    [ 0.250953] pci_bus 0000:01: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
    [ 0.250955] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
    [ 0.250956] pci_bus 0000:04: resource 1 [mem 0x80000000-0x803fffff]
    [ 0.250958] pci_bus 0000:04: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
    [ 0.250960] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
    [ 0.250961] pci_bus 0000:03: resource 1 [mem 0xfbe00000-0xfbefffff]
    [ 0.250963] pci_bus 0000:03: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
    [ 0.250965] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
    [ 0.250966] pci_bus 0000:02: resource 1 [mem 0xfbd00000-0xfbdfffff]
    [ 0.250968] pci_bus 0000:02: resource 2 [mem 0x80600000-0x807fffff 64bit pref]
    [ 0.250970] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
    [ 0.250972] pci_bus 0000:05: resource 1 [mem 0xfbf00000-0xfbffffff]
    [ 0.250973] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
    [ 0.250975] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
    [ 0.250977] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.250978] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
    [ 0.250980] pci_bus 0000:05: resource 8 [mem 0x80000000-0xffffffff]
    [ 0.251002] NET: Registered protocol family 2
    [ 0.251085] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [ 0.251263] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.251592] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.251779] TCP: Hash tables configured (established 131072 bind 65536)
    [ 0.251822] TCP reno registered
    [ 0.251861] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.251907] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.252025] NET: Registered protocol family 1
    [ 0.295104] pci 0000:01:00.0: Boot video device
    [ 0.295141] PCI: CLS 32 bytes, default 64
    [ 0.295174] Unpacking initramfs...
    [ 0.317387] Freeing initrd memory: 1728k freed
    [ 0.318002] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    [ 0.318046] apm: disabled - APM is not SMP safe.
    [ 0.318193] audit: initializing netlink socket (disabled)
    [ 0.318243] type=2000 audit(1303935493.316:1): initialized
    [ 0.318520] highmem bounce pool size: 64 pages
    [ 0.318562] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 0.320047] VFS: Disk quotas dquot_6.5.2
    [ 0.320145] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 0.320261] msgmni has been set to 1709
    [ 0.320435] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.320488] io scheduler noop registered
    [ 0.320527] io scheduler deadline registered
    [ 0.320574] io scheduler cfq registered (default)
    [ 0.320710] pcieport 0000:00:01.0: setting latency timer to 64
    [ 0.320734] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 0.320771] pcieport 0000:00:1c.0: setting latency timer to 64
    [ 0.320798] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
    [ 0.320848] pcieport 0000:00:1c.4: setting latency timer to 64
    [ 0.320875] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
    [ 0.320923] pcieport 0000:00:1c.5: setting latency timer to 64
    [ 0.320950] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
    [ 0.321092] intel_idle: MWAIT substates: 0x22220
    [ 0.321094] intel_idle: does not run on family 6 model 23
    [ 0.321105] ERST: Table is not found!
    [ 0.321155] isapnp: Scanning for PnP cards...
    [ 0.676796] isapnp: No Plug & Play device found
    [ 0.676877] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.697390] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.920667] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.973728] i8042: PNP: No PS/2 controller found. Probing ports directly.
    [ 0.976563] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.976631] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.976752] mousedev: PS/2 mouse device common for all mice
    [ 0.976847] rtc_cmos 00:03: RTC can wake from S4
    [ 1.000070] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [ 1.000137] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 1.000200] cpuidle: using governor ladder
    [ 1.000240] cpuidle: using governor menu
    [ 1.000436] TCP cubic registered
    [ 1.000476] NET: Registered protocol family 17
    [ 1.000521] Registering the dns_resolver key type
    [ 1.000569] Using IPI No-Shortcut mode
    [ 1.000679] PM: Hibernation image not present or could not be loaded.
    [ 1.000682] registered taskstats version 1
    [ 1.001054] rtc_cmos 00:03: setting system clock to 2011-04-27 20:18:14 UTC (1303935494)
    [ 1.001128] Initalizing network drop monitor service
    [ 1.001211] Freeing unused kernel memory: 424k freed
    [ 1.005982] <30>udev[38]: starting version 167
    [ 1.107427] SCSI subsystem initialized
    [ 1.127245] libata version 3.00 loaded.
    [ 1.131006] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
    [ 1.131057] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 1.131134] pata_jmicron 0000:03:00.1: setting latency timer to 64
    [ 1.131436] scsi0 : pata_jmicron
    [ 1.131554] scsi1 : pata_jmicron
    [ 1.132024] ata1: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
    [ 1.132068] ata2: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
    [ 1.142526] ahci 0000:00:1f.2: version 3.0
    [ 1.142536] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 1.142608] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
    [ 1.142644] ahci: SSS flag set, parallel bus scan disabled
    [ 1.142711] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
    [ 1.142765] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
    [ 1.142819] ahci 0000:00:1f.2: setting latency timer to 64
    [ 1.174032] scsi2 : ahci
    [ 1.174136] scsi3 : ahci
    [ 1.174235] scsi4 : ahci
    [ 1.174335] scsi5 : ahci
    [ 1.174434] scsi6 : ahci
    [ 1.174532] scsi7 : ahci
    [ 1.174699] ata3: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff100 irq 44
    [ 1.174752] ata4: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff180 irq 44
    [ 1.174804] ata5: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff200 irq 44
    [ 1.174856] ata6: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff280 irq 44
    [ 1.174908] ata7: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff300 irq 44
    [ 1.174960] ata8: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff380 irq 44
    [ 1.175036] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level,

    Hi jasonwryan,
    Your thread helps a lot. I saw a lot of posts but not this one.
    This workaround is fine for me to wait the fix.
    Thanks a lot
    Workaround :
    It seems the problem might be linked to transparent items like background.
    As explained in the above thread :
    According to the bug report the nVidia driver is freaking out and creating too many events, which causes an event buffer in Xorg to overflow.  It works OK with the older Xorg, though.
    So the temporary solution is to downgrade 3 packages.
    Install the tool to downgrade
    > yaourt -Sy downgrade
    Downgrade
    Note the item number can change
    > downgrade xf86-input-evdev
    Hit "s" key
    Choose 2 (xf86-input-evdev-2.6.0-2-i686.pkg.tar.xz)
    > downgrade xorg-server
    Hit "s" key
    Choose 1 (xorg-server-1.9.4.901-1-i686.pkg.tar.xz)
    > downgrade xorg-server-common
    Hit "s" key
    Choose 1 (xorg-server-common-1.9.4.901-1-i686.pkg.tar.xz)
    Be carefull : don't update these 3 packages when updating your system (pacman -Syu) since it is not fixed.
    Last edited by shefla (2011-04-27 22:36:37)

  • [SOLVED] EDID read invalid with nvidia-313.18

    Hello All,
    after several months of trouble-free operation, my main system started having issues with detecting my second monitor properly. I am quite sure that this has something to do with the latest nvidia driver (313.18) but since I don't use this machine daily, I can't say exactly.
    First, what's the problem? I have an nVidia GTX 460 card with two 26" TFTs @1920x1200 attached. No special configuration file has been necessary for some time now (everything detected automatically as needed). Now the main display (the left of two screens) is working as usual while the right one is limited to an 800x600 resolution. I've already tried several approaches to manually configure this one as intended but so far without success. nvidia-settings won't allow me to set any resolution other than Auto and is also weirdly showing the second display as DFP-3 whereas I think it used to be DFP-1 (following DFP-0 which is still active). A hardware issue can be eliminated as everything is smooth using an Ubuntu bootable CD which uses nouveau by default.
    Here's the Xorg.0.log with a clean configuration (i. e. no /etc/X11/xorg.conf.d/10-monitor.conf)
    [ 2.266]
    X.Org X Server 1.13.2
    Release Date: 2013-01-24
    [ 2.266] X Protocol Version 11, Revision 0
    [ 2.266] Build Operating System: Linux 3.7.4-1-ARCH x86_64
    [ 2.266] Current Operating System: Linux einstein 3.7.6-1-ARCH #1 SMP PREEMPT Mon Feb 4 09:15:13 CET 2013 x86_64
    [ 2.266] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=edf8551b-5b2d-4942-af17-b2ebb09a6cb6 ro quiet init=/usr/lib/systemd/systemd
    [ 2.266] Build Date: 25 January 2013 09:33:50AM
    [ 2.266]
    [ 2.266] Current version of pixman: 0.28.2
    [ 2.266] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 2.266] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 2.266] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb 9 11:29:34 2013
    [ 2.268] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 2.269] (==) No Layout section. Using the first Screen section.
    [ 2.269] (==) No screen section available. Using defaults.
    [ 2.269] (**) |-->Screen "Default Screen Section" (0)
    [ 2.269] (**) | |-->Monitor "<default monitor>"
    [ 2.269] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 2.269] (==) Automatically adding devices
    [ 2.269] (==) Automatically enabling devices
    [ 2.269] (==) Automatically adding GPU devices
    [ 2.270] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 2.270] Entry deleted from font path.
    [ 2.271] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 2.271] Entry deleted from font path.
    [ 2.271] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 2.271] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 2.271] Entry deleted from font path.
    [ 2.271] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 2.271] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 2.271] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 2.271] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 2.271] (II) Loader magic: 0x7fcc40
    [ 2.271] (II) Module ABI versions:
    [ 2.271] X.Org ANSI C Emulation: 0.4
    [ 2.271] X.Org Video Driver: 13.1
    [ 2.271] X.Org XInput driver : 18.0
    [ 2.271] X.Org Server Extension : 7.0
    [ 2.272] (--) PCI:*(0:1:0:0) 10de:0e22:19da:2166 rev 161, Mem @ 0xf4000000/33554432, 0xe0000000/134217728, 0xe8000000/67108864, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
    [ 2.272] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 2.272] Initializing built-in extension Generic Event Extension
    [ 2.272] Initializing built-in extension SHAPE
    [ 2.272] Initializing built-in extension MIT-SHM
    [ 2.272] Initializing built-in extension XInputExtension
    [ 2.272] Initializing built-in extension XTEST
    [ 2.272] Initializing built-in extension BIG-REQUESTS
    [ 2.272] Initializing built-in extension SYNC
    [ 2.272] Initializing built-in extension XKEYBOARD
    [ 2.272] Initializing built-in extension XC-MISC
    [ 2.272] Initializing built-in extension SECURITY
    [ 2.272] Initializing built-in extension XINERAMA
    [ 2.272] Initializing built-in extension XFIXES
    [ 2.272] Initializing built-in extension RENDER
    [ 2.272] Initializing built-in extension RANDR
    [ 2.272] Initializing built-in extension COMPOSITE
    [ 2.272] Initializing built-in extension DAMAGE
    [ 2.272] Initializing built-in extension MIT-SCREEN-SAVER
    [ 2.272] Initializing built-in extension DOUBLE-BUFFER
    [ 2.272] Initializing built-in extension RECORD
    [ 2.272] Initializing built-in extension DPMS
    [ 2.272] Initializing built-in extension X-Resource
    [ 2.272] Initializing built-in extension XVideo
    [ 2.272] Initializing built-in extension XVideo-MotionCompensation
    [ 2.272] Initializing built-in extension XFree86-VidModeExtension
    [ 2.272] Initializing built-in extension XFree86-DGA
    [ 2.272] Initializing built-in extension XFree86-DRI
    [ 2.272] Initializing built-in extension DRI2
    [ 2.272] (II) LoadModule: "glx"
    [ 2.273] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 2.346] (II) Module glx: vendor="NVIDIA Corporation"
    [ 2.346] compiled for 4.0.2, module version = 1.0.0
    [ 2.346] Module class: X.Org Server Extension
    [ 2.346] (II) NVIDIA GLX Module 313.18 Wed Jan 9 15:34:35 PST 2013
    [ 2.346] Loading extension GLX
    [ 2.346] (==) Matched nouveau as autoconfigured driver 0
    [ 2.346] (==) Matched nvidia as autoconfigured driver 1
    [ 2.346] (==) Matched nv as autoconfigured driver 2
    [ 2.346] (==) Matched vesa as autoconfigured driver 3
    [ 2.346] (==) Matched modesetting as autoconfigured driver 4
    [ 2.346] (==) Matched fbdev as autoconfigured driver 5
    [ 2.346] (==) Assigned the driver to the xf86ConfigLayout
    [ 2.346] (II) LoadModule: "nouveau"
    [ 2.347] (WW) Warning, couldn't open module nouveau
    [ 2.347] (II) UnloadModule: "nouveau"
    [ 2.347] (II) Unloading nouveau
    [ 2.347] (EE) Failed to load module "nouveau" (module does not exist, 0)
    [ 2.347] (II) LoadModule: "nvidia"
    [ 2.347] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 2.355] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 2.355] compiled for 4.0.2, module version = 1.0.0
    [ 2.355] Module class: X.Org Video Driver
    [ 2.356] (II) LoadModule: "nv"
    [ 2.356] (WW) Warning, couldn't open module nv
    [ 2.356] (II) UnloadModule: "nv"
    [ 2.356] (II) Unloading nv
    [ 2.356] (EE) Failed to load module "nv" (module does not exist, 0)
    [ 2.356] (II) LoadModule: "vesa"
    [ 2.356] (WW) Warning, couldn't open module vesa
    [ 2.356] (II) UnloadModule: "vesa"
    [ 2.356] (II) Unloading vesa
    [ 2.356] (EE) Failed to load module "vesa" (module does not exist, 0)
    [ 2.356] (II) LoadModule: "modesetting"
    [ 2.357] (WW) Warning, couldn't open module modesetting
    [ 2.357] (II) UnloadModule: "modesetting"
    [ 2.357] (II) Unloading modesetting
    [ 2.357] (EE) Failed to load module "modesetting" (module does not exist, 0)
    [ 2.357] (II) LoadModule: "fbdev"
    [ 2.357] (WW) Warning, couldn't open module fbdev
    [ 2.357] (II) UnloadModule: "fbdev"
    [ 2.357] (II) Unloading fbdev
    [ 2.357] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 2.357] (II) NVIDIA dlloader X Driver 313.18 Wed Jan 9 15:15:26 PST 2013
    [ 2.357] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 2.357] (++) using VT number 1
    [ 2.358] (II) Loading sub module "wfb"
    [ 2.358] (II) LoadModule: "wfb"
    [ 2.358] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 2.359] (II) Module wfb: vendor="X.Org Foundation"
    [ 2.359] compiled for 1.13.2, module version = 1.0.0
    [ 2.359] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 2.359] (II) Loading sub module "ramdac"
    [ 2.359] (II) LoadModule: "ramdac"
    [ 2.359] (II) Module "ramdac" already built-in
    [ 2.360] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 2.360] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    [ 2.360] (==) NVIDIA(0): RGB weight 888
    [ 2.360] (==) NVIDIA(0): Default visual is TrueColor
    [ 2.360] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 2.360] (**) NVIDIA(0): Enabling 2D acceleration
    [ 3.170] (II) NVIDIA(GPU-0): Display (Idek Iiyama PLE2607WS (DFP-0)) does not support
    [ 3.170] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 3.229] (WW) NVIDIA(GPU-0): The EDID read for display device DFP-3 is invalid:
    [ 3.229] (WW) NVIDIA(GPU-0): unrecognized EDID Header.
    [ 3.229] (--) NVIDIA(GPU-0):
    [ 3.229] (--) NVIDIA(GPU-0): Raw EDID bytes:
    [ 3.229] (--) NVIDIA(GPU-0):
    [ 3.229] (--) NVIDIA(GPU-0): ff ff ff ff ff ff ff ff 26 cd 08 56 c0 c4 00 00
    [ 3.229] (--) NVIDIA(GPU-0): 1d 13 01 03 81 37 22 78 2a 7b 65 a5 55 48 99 26
    [ 3.229] (--) NVIDIA(GPU-0): 12 50 54 bd ef 80 71 4f 81 80 81 8f 95 00 95 0f
    [ 3.229] (--) NVIDIA(GPU-0): a9 40 b3 00 01 01 28 3c 80 a0 70 b0 23 40 30 20
    [ 3.229] (--) NVIDIA(GPU-0): 36 00 26 58 21 00 00 1a 1a 36 80 a0 70 38 1f 40
    [ 3.229] (--) NVIDIA(GPU-0): 50 20 85 04 26 58 21 00 00 1a 00 00 00 fd 00 37
    [ 3.229] (--) NVIDIA(GPU-0): 4c 1d 51 11 00 0a 20 20 20 20 20 20 00 00 00 fc
    [ 3.229] (--) NVIDIA(GPU-0): 00 50 4c 45 32 36 30 37 57 53 0a 20 20 20 00 1e
    [ 3.229] (--) NVIDIA(GPU-0):
    [ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.229] (--) NVIDIA(GPU-0):
    [ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.229] (--) NVIDIA(GPU-0):
    [ 3.230] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 460 (GF104) at PCI:1:0:0 (GPU-0)
    [ 3.230] (--) NVIDIA(0): Memory: 1048576 kBytes
    [ 3.230] (--) NVIDIA(0): VideoBIOS: 70.04.13.00.a3
    [ 3.230] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 3.232] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 460 at PCI:1:0:0
    [ 3.232] (--) NVIDIA(0): CRT-0
    [ 3.232] (--) NVIDIA(0): CRT-1
    [ 3.232] (--) NVIDIA(0): Idek Iiyama PLE2607WS (DFP-0) (connected)
    [ 3.232] (--) NVIDIA(0): DFP-1
    [ 3.232] (--) NVIDIA(0): DFP-2
    [ 3.232] (--) NVIDIA(0): DFP-3 (connected)
    [ 3.232] (--) NVIDIA(0): DFP-4
    [ 3.232] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
    [ 3.232] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
    [ 3.232] (--) NVIDIA(0): Idek Iiyama PLE2607WS (DFP-0): 330.0 MHz maximum pixel clock
    [ 3.232] (--) NVIDIA(0): Idek Iiyama PLE2607WS (DFP-0): Internal Dual Link TMDS
    [ 3.232] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
    [ 3.232] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
    [ 3.232] (--) NVIDIA(0): DFP-2: 165.0 MHz maximum pixel clock
    [ 3.232] (--) NVIDIA(0): DFP-2: Internal Single Link TMDS
    [ 3.232] (--) NVIDIA(0): DFP-3: 330.0 MHz maximum pixel clock
    [ 3.232] (--) NVIDIA(0): DFP-3: Internal Dual Link TMDS
    [ 3.232] (--) NVIDIA(0): DFP-4: 480.0 MHz maximum pixel clock
    [ 3.232] (--) NVIDIA(0): DFP-4: Internal DisplayPort
    [ 3.232] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 3.232] (**) NVIDIA(0): device Idek Iiyama PLE2607WS (DFP-0) (Using EDID
    [ 3.232] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 3.233] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 3.233] (**) NVIDIA(0): device DFP-3 (Using EDID frequencies has been enabled on
    [ 3.233] (**) NVIDIA(0): all display devices.)
    [ 3.233] (==) NVIDIA(0):
    [ 3.233] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    [ 3.233] (==) NVIDIA(0): will be used as the requested mode.
    [ 3.233] (==) NVIDIA(0):
    [ 3.233] (II) NVIDIA(0): Validated MetaModes:
    [ 3.233] (II) NVIDIA(0): "DFP-0:nvidia-auto-select,DFP-3:nvidia-auto-select"
    [ 3.233] (II) NVIDIA(0): Virtual screen size determined to be 2720 x 1200
    [ 3.261] (--) NVIDIA(0): DPI set to (88, 89); computed from "UseEdidDpi" X config
    [ 3.261] (--) NVIDIA(0): option
    [ 3.261] (--) Depth 24 pixmap format is 32 bpp
    [ 3.261] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
    [ 3.261] (II) NVIDIA: access.
    [ 3.265] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 3.265] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 3.265] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 3.265] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 3.265] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 3.265] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 3.265] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 3.265] (II) NVIDIA(0): Config Options in the README.
    [ 3.267] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select,DFP-3:nvidia-auto-select"
    [ 3.357] Loading extension NV-GLX
    [ 3.452] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 3.452] (==) NVIDIA(0): Backing store disabled
    [ 3.452] (==) NVIDIA(0): Silken mouse enabled
    [ 3.453] (==) NVIDIA(0): DPMS enabled
    [ 3.453] Loading extension NV-CONTROL
    [ 3.453] Loading extension XINERAMA
    [ 3.453] (II) Loading sub module "dri2"
    [ 3.453] (II) LoadModule: "dri2"
    [ 3.453] (II) Module "dri2" already built-in
    [ 3.453] (II) NVIDIA(0): [DRI2] Setup complete
    [ 3.453] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 3.453] (--) RandR disabled
    [ 3.456] (II) Initializing extension GLX
    [ 3.502] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 3.503] (**) Power Button: Applying InputClass "system-keyboard"
    [ 3.503] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 3.503] (II) LoadModule: "evdev"
    [ 3.503] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 3.505] (II) Module evdev: vendor="X.Org Foundation"
    [ 3.505] compiled for 1.13.0, module version = 2.7.3
    [ 3.505] Module class: X.Org XInput Driver
    [ 3.505] ABI class: X.Org XInput driver, version 18.0
    [ 3.505] (II) Using input driver 'evdev' for 'Power Button'
    [ 3.505] (**) Power Button: always reports core events
    [ 3.505] (**) evdev: Power Button: Device: "/dev/input/event1"
    [ 3.505] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 3.505] (--) evdev: Power Button: Found keys
    [ 3.505] (II) evdev: Power Button: Configuring as keyboard
    [ 3.505] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
    [ 3.505] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 3.505] (**) Option "xkb_rules" "evdev"
    [ 3.505] (**) Option "xkb_model" "pc105"
    [ 3.505] (**) Option "xkb_layout" "de"
    [ 3.505] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 3.529] (II) config/udev: Adding input device Power Button (/dev/input/event0)
    [ 3.529] (**) Power Button: Applying InputClass "system-keyboard"
    [ 3.529] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 3.529] (II) Using input driver 'evdev' for 'Power Button'
    [ 3.529] (**) Power Button: always reports core events
    [ 3.529] (**) evdev: Power Button: Device: "/dev/input/event0"
    [ 3.529] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 3.529] (--) evdev: Power Button: Found keys
    [ 3.529] (II) evdev: Power Button: Configuring as keyboard
    [ 3.529] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
    [ 3.529] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 3.529] (**) Option "xkb_rules" "evdev"
    [ 3.529] (**) Option "xkb_model" "pc105"
    [ 3.529] (**) Option "xkb_layout" "de"
    [ 3.529] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 3.530] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event11)
    [ 3.530] (II) No input driver specified, ignoring this device.
    [ 3.530] (II) This device may have been added with another device file.
    [ 3.530] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event12)
    [ 3.530] (II) No input driver specified, ignoring this device.
    [ 3.530] (II) This device may have been added with another device file.
    [ 3.531] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event13)
    [ 3.531] (II) No input driver specified, ignoring this device.
    [ 3.531] (II) This device may have been added with another device file.
    [ 3.531] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event14)
    [ 3.531] (II) No input driver specified, ignoring this device.
    [ 3.531] (II) This device may have been added with another device file.
    [ 3.531] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event3)
    [ 3.531] (II) No input driver specified, ignoring this device.
    [ 3.531] (II) This device may have been added with another device file.
    [ 3.531] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event4)
    [ 3.531] (II) No input driver specified, ignoring this device.
    [ 3.531] (II) This device may have been added with another device file.
    [ 3.532] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event5)
    [ 3.532] (II) No input driver specified, ignoring this device.
    [ 3.532] (II) This device may have been added with another device file.
    [ 3.532] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event7)
    [ 3.532] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
    [ 3.532] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
    [ 3.532] (**) Logitech USB Receiver: always reports core events
    [ 3.532] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event7"
    [ 3.532] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc51a
    [ 3.532] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
    [ 3.532] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
    [ 3.532] (--) evdev: Logitech USB Receiver: Found relative axes
    [ 3.532] (--) evdev: Logitech USB Receiver: Found x and y relative axes
    [ 3.532] (II) evdev: Logitech USB Receiver: Configuring as mouse
    [ 3.532] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
    [ 3.532] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    [ 3.532] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 3.532] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/input/input7/event7"
    [ 3.532] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 8)
    [ 3.532] (II) evdev: Logitech USB Receiver: initialized for relative axes.
    [ 3.533] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
    [ 3.533] (**) Logitech USB Receiver: (accel) acceleration profile 0
    [ 3.533] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
    [ 3.533] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
    [ 3.533] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
    [ 3.533] (II) No input driver specified, ignoring this device.
    [ 3.533] (II) This device may have been added with another device file.
    [ 3.533] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event8)
    [ 3.533] (**) Logitech USB Receiver: Applying InputClass "system-keyboard"
    [ 3.533] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
    [ 3.533] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
    [ 3.533] (**) Logitech USB Receiver: always reports core events
    [ 3.533] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event8"
    [ 3.534] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc51a
    [ 3.534] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
    [ 3.534] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
    [ 3.534] (--) evdev: Logitech USB Receiver: Found relative axes
    [ 3.534] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
    [ 3.534] (--) evdev: Logitech USB Receiver: Found absolute axes
    [ 3.534] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
    [ 3.534] (--) evdev: Logitech USB Receiver: Found keys
    [ 3.534] (II) evdev: Logitech USB Receiver: Configuring as mouse
    [ 3.534] (II) evdev: Logitech USB Receiver: Configuring as keyboard
    [ 3.534] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
    [ 3.534] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    [ 3.534] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 3.534] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.1/input/input8/event8"
    [ 3.534] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9)
    [ 3.534] (**) Option "xkb_rules" "evdev"
    [ 3.534] (**) Option "xkb_model" "pc105"
    [ 3.534] (**) Option "xkb_layout" "de"
    [ 3.534] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 3.534] (II) evdev: Logitech USB Receiver: initialized for relative axes.
    [ 3.534] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
    [ 3.534] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
    [ 3.534] (**) Logitech USB Receiver: (accel) acceleration profile 0
    [ 3.534] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
    [ 3.534] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
    [ 3.535] (II) config/udev: Adding input device Microsoft Microsoft® Digital Media Pro Keyboard (/dev/input/event9)
    [ 3.535] (**) Microsoft Microsoft® Digital Media Pro Keyboard: Applying InputClass "system-keyboard"
    [ 3.535] (**) Microsoft Microsoft® Digital Media Pro Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 3.535] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Digital Media Pro Keyboard'
    [ 3.535] (**) Microsoft Microsoft® Digital Media Pro Keyboard: always reports core events
    [ 3.535] (**) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Device: "/dev/input/event9"
    [ 3.535] (--) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Vendor 0x45e Product 0xb0
    [ 3.535] (--) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Found keys
    [ 3.535] (II) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Configuring as keyboard
    [ 3.535] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.0/input/input9/event9"
    [ 3.535] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Digital Media Pro Keyboard" (type: KEYBOARD, id 10)
    [ 3.535] (**) Option "xkb_rules" "evdev"
    [ 3.535] (**) Option "xkb_model" "pc105"
    [ 3.535] (**) Option "xkb_layout" "de"
    [ 3.535] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 3.536] (II) config/udev: Adding input device Microsoft Microsoft® Digital Media Pro Keyboard (/dev/input/event10)
    [ 3.536] (**) Microsoft Microsoft® Digital Media Pro Keyboard: Applying InputClass "system-keyboard"
    [ 3.536] (**) Microsoft Microsoft® Digital Media Pro Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 3.536] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Digital Media Pro Keyboard'
    [ 3.536] (**) Microsoft Microsoft® Digital Media Pro Keyboard: always reports core events
    [ 3.536] (**) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Device: "/dev/input/event10"
    [ 3.536] (--) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Vendor 0x45e Product 0xb0
    [ 3.536] (--) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Found 1 mouse buttons
    [ 3.536] (--) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Found scroll wheel(s)
    [ 3.536] (--) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Found relative axes
    [ 3.536] (--) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Found absolute axes
    [ 3.536] (--) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Found absolute multitouch axes
    [ 3.536] (--) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Found x and y absolute axes
    [ 3.536] (--) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Found keys
    [ 3.536] (II) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Forcing relative x/y axes to exist.
    [ 3.536] (II) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Configuring as mouse
    [ 3.536] (II) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Configuring as keyboard
    [ 3.536] (II) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Adding scrollwheel support
    [ 3.536] (**) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: YAxisMapping: buttons 4 and 5
    [ 3.536] (**) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 3.536] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.1/input/input10/event10"
    [ 3.536] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Digital Media Pro Keyboard" (type: KEYBOARD, id 11)
    [ 3.536] (**) Option "xkb_rules" "evdev"
    [ 3.536] (**) Option "xkb_model" "pc105"
    [ 3.536] (**) Option "xkb_layout" "de"
    [ 3.536] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 3.536] (II) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: initialized for relative axes.
    [ 3.536] (WW) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: ignoring absolute axes.
    [ 3.536] (**) Microsoft Microsoft® Digital Media Pro Keyboard: (accel) keeping acceleration scheme 1
    [ 3.536] (**) Microsoft Microsoft® Digital Media Pro Keyboard: (accel) acceleration profile 0
    [ 3.536] (**) Microsoft Microsoft® Digital Media Pro Keyboard: (accel) acceleration factor: 2.000
    [ 3.536] (**) Microsoft Microsoft® Digital Media Pro Keyboard: (accel) acceleration threshold: 4
    [ 3.537] (II) config/udev: Adding input device Microsoft Microsoft® Digital Media Pro Keyboard (/dev/input/js0)
    [ 3.537] (**) Microsoft Microsoft® Digital Media Pro Keyboard: Applying InputClass "system-keyboard"
    [ 3.537] (II) No input driver specified, ignoring this device.
    [ 3.537] (II) This device may have been added with another device file.
    [ 3.537] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event6)
    [ 3.537] (**) Eee PC WMI hotkeys: Applying InputClass "system-keyboard"
    [ 3.537] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 3.537] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
    [ 3.537] (**) Eee PC WMI hotkeys: always reports core events
    [ 3.537] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event6"
    [ 3.537] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
    [ 3.537] (--) evdev: Eee PC WMI hotkeys: Found keys
    [ 3.537] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
    [ 3.537] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input6/event6"
    [ 3.537] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 12)
    [ 3.537] (**) Option "xkb_rules" "evdev"
    [ 3.537] (**) Option "xkb_model" "pc105"
    [ 3.537] (**) Option "xkb_layout" "de"
    [ 3.537] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 3.538] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
    [ 3.538] (II) No input driver specified, ignoring this device.
    [ 3.538] (II) This device may have been added with another device file.
    [ 3.542] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event4)
    [ 3.542] (II) No input driver specified, ignoring this device.
    [ 3.542] (II) This device may have been added with another device file.
    [ 3.542] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event14)
    [ 3.542] (II) No input driver specified, ignoring this device.
    [ 3.542] (II) This device may have been added with another device file.
    [ 3.543] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event3)
    [ 3.543] (II) No input driver specified, ignoring this device.
    [ 3.543] (II) This device may have been added with another device file.
    [ 3.543] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event5)
    [ 3.543] (II) No input driver specified, ignoring this device.
    [ 3.543] (II) This device may have been added with another device file.
    [ 3.543] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event13)
    [ 3.543] (II) No input driver specified, ignoring this device.
    [ 3.543] (II) This device may have been added with another device file.
    [ 3.543] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event12)
    [ 3.543] (II) No input driver specified, ignoring this device.
    [ 3.543] (II) This device may have been added with another device file.
    [ 3.543] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event11)
    [ 3.543] (II) No input driver specified, ignoring this device.
    [ 3.543] (II) This device may have been added with another device file.
    [ 3.620] (II) NVIDIA(GPU-0): Display (Idek Iiyama PLE2607WS (DFP-0)) does not support
    [ 3.620] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 3.620] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 3.620] (**) NVIDIA(0): device Idek Iiyama PLE2607WS (DFP-0) (Using EDID
    [ 3.620] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 3.679] (WW) NVIDIA(GPU-0): The EDID read for display device DFP-3 is invalid:
    [ 3.679] (WW) NVIDIA(GPU-0): unrecognized EDID Header.
    [ 3.679] (--) NVIDIA(GPU-0):
    [ 3.679] (--) NVIDIA(GPU-0): Raw EDID bytes:
    [ 3.679] (--) NVIDIA(GPU-0):
    [ 3.679] (--) NVIDIA(GPU-0): ff ff ff ff ff ff ff ff 26 cd 08 56 c0 c4 00 00
    [ 3.679] (--) NVIDIA(GPU-0): 1d 13 01 03 81 37 22 78 2a 7b 65 a5 55 48 99 26
    [ 3.679] (--) NVIDIA(GPU-0): 12 50 54 bd ef 80 71 4f 81 80 81 8f 95 00 95 0f
    [ 3.679] (--) NVIDIA(GPU-0): a9 40 b3 00 01 01 28 3c 80 a0 70 b0 23 40 30 20
    [ 3.679] (--) NVIDIA(GPU-0): 36 00 26 58 21 00 00 1a 1a 36 80 a0 70 38 1f 40
    [ 3.679] (--) NVIDIA(GPU-0): 50 20 85 04 26 58 21 00 00 1a 00 00 00 fd 00 37
    [ 3.679] (--) NVIDIA(GPU-0): 4c 1d 51 11 00 0a 20 20 20 20 20 20 00 00 00 fc
    [ 3.679] (--) NVIDIA(GPU-0): 00 50 4c 45 32 36 30 37 57 53 0a 20 20 20 00 1e
    [ 3.680] (--) NVIDIA(GPU-0):
    [ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.680] (--) NVIDIA(GPU-0):
    [ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.680] (--) NVIDIA(GPU-0):
    [ 3.680] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 3.680] (**) NVIDIA(0): device DFP-3 (Using EDID frequencies has been enabled on
    [ 3.680] (**) NVIDIA(0): all display devices.)
    [ 4.259] (II) NVIDIA(GPU-0): Display (Idek Iiyama PLE2607WS (DFP-0)) does not support
    [ 4.259] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 4.259] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 4.259] (**) NVIDIA(0): device Idek Iiyama PLE2607WS (DFP-0) (Using EDID
    [ 4.259] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 4.319] (WW) NVIDIA(GPU-0): The EDID read for display device DFP-3 is invalid:
    [ 4.319] (WW) NVIDIA(GPU-0): unrecognized EDID Header.
    [ 4.319] (--) NVIDIA(GPU-0):
    [ 4.319] (--) NVIDIA(GPU-0): Raw EDID bytes:
    [ 4.319] (--) NVIDIA(GPU-0):
    [ 4.319] (--) NVIDIA(GPU-0): ff ff ff ff ff ff ff ff 26 cd 08 56 c0 c4 00 00
    [ 4.319] (--) NVIDIA(GPU-0): 1d 13 01 03 81 37 22 78 2a 7b 65 a5 55 48 99 26
    [ 4.319] (--) NVIDIA(GPU-0): 12 50 54 bd ef 80 71 4f 81 80 81 8f 95 00 95 0f
    [ 4.319] (--) NVIDIA(GPU-0): a9 40 b3 00 01 01 28 3c 80 a0 70 b0 23 40 30 20
    [ 4.319] (--) NVIDIA(GPU-0): 36 00 26 58 21 00 00 1a 1a 36 80 a0 70 38 1f 40
    [ 4.319] (--) NVIDIA(GPU-0): 50 20 85 04 26 58 21 00 00 1a 00 00 00 fd 00 37
    [ 4.319] (--) NVIDIA(GPU-0): 4c 1d 51 11 00 0a 20 20 20 20 20 20 00 00 00 fc
    [ 4.319] (--) NVIDIA(GPU-0): 00 50 4c 45 32 36 30 37 57 53 0a 20 20 20 00 1e
    [ 4.319] (--) NVIDIA(GPU-0):
    [ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 4.319] (--) NVIDIA(GPU-0):
    [ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 4.319] (--) NVIDIA(GPU-0):
    [ 4.319] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 4.319] (**) NVIDIA(0): device DFP-3 (Using EDID frequencies has been enabled on
    [ 4.319] (**) NVIDIA(0): all display devices.)
    [ 16.599] (II) NVIDIA(GPU-0): Display (Idek Iiyama PLE2607WS (DFP-0)) does not support
    [ 16.599] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 16.599] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 16.599] (**) NVIDIA(0): device Idek Iiyama PLE2607WS (DFP-0) (Using EDID
    [ 16.599] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 16.659] (WW) NVIDIA(GPU-0): The EDID read for display device DFP-3 is invalid:
    [ 16.659] (WW) NVIDIA(GPU-0): unrecognized EDID Header.
    [ 16.659] (--) NVIDIA(GPU-0):
    [ 16.659] (--) NVIDIA(GPU-0): Raw EDID bytes:
    [ 16.659] (--) NVIDIA(GPU-0):
    [ 16.659] (--) NVIDIA(GPU-0): ff ff ff ff ff ff ff ff 26 cd 08 56 c0 c4 00 00
    [ 16.659] (--) NVIDIA(GPU-0): 1d 13 01 03 81 37 22 78 2a 7b 65 a5 55 48 99 26
    [ 16.659] (--) NVIDIA(GPU-0): 12 50 54 bd ef 80 71 4f 81 80 81 8f 95 00 95 0f
    [ 16.659] (--) NVIDIA(GPU-0): a9 40 b3 00 01 01 28 3c 80 a0 70 b0 23 40 30 20
    [ 16.659] (--) NVIDIA(GPU-0): 36 00 26 58 21 00 00 1a 1a 36 80 a0 70 38 1f 40
    [ 16.659] (--) NVIDIA(GPU-0): 50 20 85 04 26 58 21 00 00 1a 00 00 00 fd 00 37
    [ 16.659] (--) NVIDIA(GPU-0): 4c 1d 51 11 00 0a 20 20 20 20 20 20 00 00 00 fc
    [ 16.659] (--) NVIDIA(GPU-0): 00 50 4c 45 32 36 30 37 57 53 0a 20 20 20 00 1e
    [ 16.659] (--) NVIDIA(GPU-0):
    [ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 16.659] (--) NVIDIA(GPU-0):
    [ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 16.659] (--) NVIDIA(GPU-0):
    [ 16.659] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 16.659] (**) NVIDIA(0): device DFP-3 (Using EDID frequencies has been enabled on
    [ 16.659] (**) NVIDIA(0): all display devices.)
    [ 17.393] (II) NVIDIA(GPU-0): Display (Idek Iiyama PLE2607WS (DFP-0)) does not support
    [ 17.393] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 17.393] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 17.393] (**) NVIDIA(0): device Idek Iiyama PLE2607WS (DFP-0) (Using EDID
    [ 17.393] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 17.453] (WW) NVIDIA(GPU-0): The EDID read for display device DFP-3 is invalid:
    [ 17.453] (WW) NVIDIA(GPU-0): unrecognized EDID Header.
    [ 17.453] (--) NVIDIA(GPU-0):
    [ 17.453] (--) NVIDIA(GPU-0): Raw EDID bytes:
    [ 17.453] (--) NVIDIA(GPU-0):
    [ 17.453] (--) NVIDIA(GPU-0): ff ff ff ff ff ff ff ff 26 cd 08 56 c0 c4 00 00
    [ 17.453] (--) NVIDIA(GPU-0): 1d 13 01 03 81 37 22 78 2a 7b 65 a5 55 48 99 26
    [ 17.453] (--) NVIDIA(GPU-0): 12 50 54 bd ef 80 71 4f 81 80 81 8f 95 00 95 0f
    [ 17.453] (--) NVIDIA(GPU-0): a9 40 b3 00 01 01 28 3c 80 a0 70 b0 23 40 30 20
    [ 17.453] (--) NVIDIA(GPU-0): 36 00 26 58 21 00 00 1a 1a 36 80 a0 70 38 1f 40
    [ 17.453] (--) NVIDIA(GPU-0): 50 20 85 04 26 58 21 00 00 1a 00 00 00 fd 00 37
    [ 17.453] (--) NVIDIA(GPU-0): 4c 1d 51 11 00 0a 20 20 20 20 20 20 00 00 00 fc
    [ 17.453] (--) NVIDIA(GPU-0): 00 50 4c 45 32 36 30 37 57 53 0a 20 20 20 00 1e
    [ 17.453] (--) NVIDIA(GPU-0):
    [ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 17.453] (--) NVIDIA(GPU-0):
    [ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 17.453] (--) NVIDIA(GPU-0):
    [ 17.453] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 17.453] (**) NVIDIA(0): device DFP-3 (Using EDID frequencies has been enabled on
    [ 17.453] (**) NVIDIA(0): all display devices.)
    As you can see, the EDID information cannot be obtained from the second display. Since I haven't found any indication of this being a bug in the latest nVidia driver, I wanted to ask whether you have come across any hints or explanations.
    For the time being, I can live with it but I'm actually considering moving to nouveau instead now.
    Thanks for your time. Cheers
    Smoerrebroed
    Last edited by Smoerrebroed (2013-05-04 11:34:32)

    Alright, though it still bothers me that for some reason the nvidia driver no longer correctly reads and processes EDID information on all connectors, supplying DFP-0's EDID to DFP-3 via the "CustomEDID" option fixed all woes. 1920x1200 is now again detected as default, TwinView is enabled and so on ... even without a sophisticated 10-monitor.conf:
    Section "Device"
    Identifier "GeForce GTX 460"
    Driver "nvidia"
    Option "CustomEDID" "DFP-3:/etc/X11/xorg.conf.d/edid.bin"
    EndSection
    Everything else remains at default and works. Perhaps this post will also help others in dealing with nvidia issues.
    One thing this has taught me though is: As much inclined as I am towards open source software, the nouveau driver is really still a long way off the performance of the proprietary nvidia module. If you want/need to work seriously in 3D, there's no alternative.
    Cheers
    Smoerrebroed
    Last edited by Smoerrebroed (2013-05-31 19:36:45)

Maybe you are looking for

  • How do I make Firefox the one that I can send links through? Thunderbird now launches when I want to send a link.

    In the past, when I sent a web link on Firefox, my gmail address book would pop up. Thunderbird had an update today, but I'm thinking it may have been a virus. Now, when I try to send a link out of Firefox Mozilla, Thunderbird launches and I don't wa

  • Get a link to look in a certain folder ??

    I have a DB that the search engine will look through for business names, type and where they are located, but when the results come back is it possible to have the link for that company link only to the folder for that company? So that way they only

  • Why icloud storage not update after purchased

    Hello, I have problem with ICloud storage. I have purchased for upgrade from 5GB(Free) to 20GB but my storage still full. I purchased 2 times but nothing happen to my ICloud storage. Please help me.

  • Dashboard clock

    I downloaded a big analogue clock onto dashboard, and I can't change the time. Does anyone know how to change the time? Otherwise does anyone know how I can delete it from dashboard? thanks

  • How to see URL in Safari 6?

    This is driving me nuts. I can't see the URLs of any webpages that are open in any tabs in Safari. There must be some way to view the URL, right? The search/activity bar at the top of Safari only shows whatever I typed into it last (in any tab), whic