RE: GR Processing Time not showing in MD04 and Exception List
Hi,
Just a quick question on GR Processing Time.
A sales order has been raised and delievery day is for lets say 05/04/2010. MRP runs and it creates a planned order to be finished on the 05/04/2010 but it should finish on 04/04/2010 and as I have a GR time for 1 days.
All data is correct but it doesn't seem to give an exception message saying reschedule in for the 04/04/2010 based on the GR Lead time build in material master.
Regards
Adeel Sarwar
Dear ,
Please note that while you are Carrying out MRP in MD02 you might have selected scheduling indicator -2 which triggered Lead times Scheduling based on the sales Order Delievery date , Scheduling Margin Key Timings , GR Processing Time with an infinite capacity (MRP system does not carry out any Capacity Avalibility check where as does it does Scheduling for Planned Order considering infitinte capacity in WCs) .As the system calcualtes the Planned order Deleivery date based on those parametrs with in the planning and re-scheduling horzon , so result is not exceptional from MRP scheduling ponit of view .
Now if you re-schedule the order as per your delivery requirement date , you will get the exeception messgae as applicable in MD04.
Otherwise , please check in SPRO-Material Requirement Planning ---Evalution -Exception Msg -Select Key U1-MSG 10-Double click on that -Check wether the "No Exception Msg " is ticked .Remove the same .
Regards
JH
Similar Messages
-
GR processing time not taken into account for exception message in MD04
Hello Gurus!
In MD04 when we toggle between displaying at GR date and AV date sometimes there is a shortage in AV date view but none in GR date view due to GR processing time.
How can we include the GR processing time to be taken into account so that an exception message is shown for the shortage during AV view?
Thanks in advance!
-AlvinHi There
What you meant by shortage,,,
AV- Available date,
GR- Availble date+GR processing time
if you have not set up the GR processing time in Master, it may come as ZERO days,, so AV and GR date may be same,,
if this is not your quesry, please provide more details on your query,,,
Thanks
Senthil -
Sales order not shown in MD04 and product view
Hi All,
Sales order is created,but its not showing in MD04 and RRP3,The material type is X0.
I checked the status of the sales order that is blocked for authorization,Is there any other reason for this.
Regards,
PrabhuHi,
In the sales order, please check the item category in the schedule lines.
If the item category is CN, then you cannot see the requirements in MD04.
The item category is determined from the MRP type set in the material master. Since it was ND earlier, the Item category in the sales order became CN.
Had the sales order been created after changing the MRP type, the Item category would have been CP and you can see the requirements in MD04.
You can change the item category in the schedule line to CP and the requirements will be transferred to MD04.
Once they are in MD04, they would automatically come to RRP3, provided the material exists in the active integration model.
Regards, -
Sales Order number is not showing in MD04
Hi Gurus ,
I have got one case where Sales order number is not showing in MD04 screen . This sales order , line item has already delivered , PGI & billing document also been generated . Moreover accounting document is also been created .As cheeked & found that it is not shwoing in MD04 screen because at the time sales order creation availability check “01” was maintained which has sum up all the requirement in one particular day ( Also as
per SAP note -70408) .
Now because all the subsequent document has been generated for sales order so we can not mark it for “Rejection for rejection “ & to create new sales order with availability check “02” in material master .
Please let me know the possible solution for the same or if any sap note would be required to get the sales order number in MD04 .
Thanks ,
AmanHi Kiran ,
Actually before running the report in “SDRQCR21” in PRD I wanted to run it in “Quality “ .
In quality I am not able to simulate the same .
Please refer below points related to my testing result .
1.Mainatined availability check group “01” .
2 . Created Sales order
3. Check in MD04 screen & as expected sales order was coming blank with negative Qty .
4. Run the MRP which generated PR
5. PR converted to PO & GRN was done which updated the stock
6. Created delivery & checked the same in MD04 . It was also coming blank . No delivery document numbe was showing in screen but it was coming with negative Qty .
7. Done the PGI & blank delivery document number was removed & it become normal .
In PRD .
There are 3 sales order
One sales order is already marked reason for rejection & two sales order delivery , PGI has been done .
But still it is showing blank sales order with negative Qty & after MRP run it is generating the PR also .
I don't why it was showing with negative values .
Please refer attacehed screen shot .
Thanks,
Regards ,
Aman -
PIR visible in MD63 but not showing in MD04
Hi,
I have transferred SOP plan to demand management through mass processing...requirements are visible in md63 but they are not showing in MD04..
Thanks
KumarDear Kumar,
The PIR is maintained for the version GP,which is not active,as suggested either you should maintain
the PIR for this version as active or else for the version 00(SAP standard).
Regards
Mangalraj.S -
Quick time not showing on Websites
I have an issue with quick time not showing up on a website I frequent. All I see, is the "Q". It will not load the audio. The site in question is Vicfirth dot com. This is not a solicitation. I'm just confused if it is my computer or the web site.
Thanks.http://validator.w3.org/check?uri=http%3A%2F%2Fwww.vicfirth.com%2F&charset=%28de tect+automatically%29&doctype=Inline&group=0
Very sloppy html page code. -
BPEL Processes are not showing in BPEL Console after OPMN restart
Hi All,
BPEL Processes are not showing in BPEL Console after OPMN restart. It was showing earlier before restart.
Can some one help on this?
ThanksVikky,
Are you using 10g?
If BPELConsole is up but you don't see any process, you can go to the log files and see what is the problem.
It might relates to permissions, or DB issues etc....
Arik -
Schedule agreement not showing in MD04
Hi All
We have a schedule agreement created and its not reflecting in MD04. According to the thread i changed the avl check to 02.
But its still not showing in MD04. So my question is do I have to do any other thing so that the avl chk change will get affected for same schedule agrmnt or I have to create a new one so that it will show in MD04.
Thank You.First you need to identify what schedule line category is flowing in your sale order. Normally, this would be CP. So next go to VOV6, select the schedule line category and execute. There tick the box for "Req./Assembly"
thanks
G. Lakshmipathi -
PIR not showing in Md04 after certain date
Hi
The PIR's are coming from LTP.
The PIR's which are created after 03/2015 are not showing in MD04
MRP run back ground with NETCH still why PIR's are not showing?
What settings I have to check..
Regards,
Srihari.MPlease check the following :
1.If you have done splitting of the required qty during PIR creation . , please check in MD62 whether , you have un-checked the Active Version for some of them .If those qty. are falling after 03/2015 , then it will not pop up in MD04
2.While creation of PIR , if the planning period is beyond planning horizon , it will flag you a message and requirement will not display in MD04 , then check the same in OMPD and compare with planning period.
Regards
JH -
Hi
I created PR to PO. Po created with account assignment category c-sales order and item category s-third party. My question is PO or PR not showing in MD04.
Please can anybody suggest?Hi,
Please check whether your PO and PR really exist for the plant, material you are speaking about.
You can check in VA03 in document flow whether the mentioned PR, PO really exists.
If it is so, you should see both PR and PO on MRP list. Start MD04 again > please check whether you gave proper material, plant, MRP area in MD04 > click on refresh button.
Please check organisational levels (used in MD04 and used in your PR/PO)! Please also check whether there's deletion indicator on the PO / PR.
Can this help?
BR
Csaba
Edited by: Csaba Szommer on Jul 22, 2008 2:12 PM
Edited by: Csaba Szommer on Jul 22, 2008 2:13 PM -
Shared printer from a pc does not show up on my printer list.
I have a macbook air and the shared printer from a pc does not show up on my printer list. I know it's available on the network as I have a another pc that has access to it. The Mac did find it at one time but it has since disappeared. Appreciate help.
RichCan you see the CD ripped songs in iTunes itself? Can you then right-click and select "Show in Windows Explorer"?
-
I am getting error (-1) while updating my iPhone 4 to iOS 5.1. The phone has gone into a recovery mode. Restore fails every time at "restoring the firmware" stage. Striped bar remains for a long time, then shows "error (-1)" and the restore fails. I have been doing it for last 12 hours. Help!
Thanks for your reply Michalo. I am in India and here Apple care does not work on Sundays. I have been without my phone for the entire day. Perhaps tomorrow will bring some respite. There is not solution to "error (-1)" on any forum it seems. I found one forum which suggested use of Tiny Umbrella. Any idea about that?
-
I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview shows the contents, I can't open the document (Powerpoint) and I can't move the document. I tried "Copy" and paste but it doesn't work. I tried "Share" with Airdrop and iChat, but the file is inaccessible. When i try to rename the file, it says the filename is too long.
When I try to open it, it says the alias is not good, and asks if I want to fix the alias. I'm afraid to do that and lose all access to this document.
Right now, it feels like a ghost document - it is on the computer intact, but it is in an undisclosed location and inaccessible.
Please help!!I was able to resolve this by repairing permissions, even though no permissions error was listed specifically for that file.
I could also have recovered it through Time Machine, but I'm interested in knowing how not to have this happen again!
I was afraid of rebooting and possibly losing track even of the ghost.
I did not try EasyFind - I'll keep that in mind next time.
Thanks for all the comments. -
ATV not showing in the iTunes device list? Check your HTTP proxy config
Seems like many people are having trouble getting their ATV to show up in the iTunes Devices list. Here's my situation, and the root cause:
1. I have a small network at home consisting of one LAN with a number of computers, and a gateway router that provides DHCP, DNS and HTTP (web) proxy services
2. I found that my ATV would display in the Devices list only when the ATV and at least one Mac were isolated from the rest of my network; when I connected them back to the rest of the LAN the ATV disappeared from the Devices list (in the simplest case this isolation was a crossover cable between the Mac and ATV)
3. when connected to the whole LAN, the ATV could successfully contact the iTunes Store (trailers, etc) but would not show up in the Devices list
4. I could ping the ATV from the Mac running iTunes every time (i.e. I did not have a basic connectivity problem; e.g. "ping appletv.local." always worked)
5. I started with my ATV on v1.1, when I upgraded to 2.0 and turned on the the iTunes' "Look for remote speakers connected with AirTunes" option ATV always appeared in the speaker list (i.e. even when it wasn't in the Devices list)
I had gone through the Apple troubleshooting guides, with no change.
After a lot of elimination I discovered that my problem was with my web proxy settings: my Macs were configured to use my gateway router for HTTP, and it seems that iTunes connects back to the Apple TV via HTTP - these requests were sent to the proxy and rejected (as they were for an address on the inside LAN; this is the way my proxy was configured).
I fixed the problem by using a PAC file specifying my LAN as "DIRECT" (e.g. below). An alternative would have been to configure my proxy to allow connections from the LAN back into the LAN (but be careful about allowing access from elsewhere, e.g. the Internet).
Here's my PAC file: my LAN is in the 10.0.0.0/8 address space, domain *.home.lan. (iTunes seems to contact the AppleTV via it's IP address, e.g. http://10.0.0.169:3689/ript/fp-setup?fairPlayID=4a5...):
function FindProxyForURL(url, host)
// simple hostname
if (dnsDomainLevels(host) == 0) {return "DIRECT";}
// match Host against local domains (w/ optional :port)
var dom = /(127\.\d.d+.d+|.local.?|10.d+.d+.d+|.home.lan.?)(:d)?/;
if(dom.test(host)) { return "DIRECT"; }
// All other requests go through port 8080 of proxy
// should that fail to respond, go directly to the WWW:
return "PROXY proxy.home.lan:8080; DIRECT";
The reason the ATV was successfully appearing in the Devices list when it and a Mac were isolated from the rest of the LAN was that the Mac was unable to reach the proxy, and falling back to the 'DIRECT' connection.
Note: if you don't have basic connectivity, e.g. if ping appletv.local. doesn't work, then the above is almost certainly not your problem.
Ben
Message was edited by: af3556Hi There,
I have the exact same issue going on that this person described in this thread, but with the EXCEPTION in my case being that, after I have plugged my device into my laptop and uplugged it (about 10 consecutive times), my iTunes FINALLY recognizes my iPod Touch.
This is extremely frustrating to have to go through this scenerio each and every single time I want to synch and charge my Touch. Is there any way to correct it, so that the device would be recognized immediately when I first plug it in? It used to work this way (prior to the v.10 update, most likely).
Thanks! -
This is second time i show my problem and no answer.
this is second time i show my problem and no answer.
I have problem in my iphone icloud password and apple password are not same ihave apple password when i wont
to access to icloud i cant but no problem to use apple password in app store.
my problem is iforget icloud password and its not same apple password and iclud password?
plz help me plzYou got an answer here: I forget icloud password. Apple ID and icloud have different password And i cant use apple id in i cloud Plz help me
Maybe you are looking for
-
Require following field from one function module
Hi, This is a issue which I am working on.Can u help me in this issue The issue is as below. It ia a Abaper related issue .They want the clarification from Functional side We require your help in below mentioned Open order extractions. Basically we w
-
Starting a service automatically from a validation script
Is it possible to start off a service from a javascript running on the page or as part of form validation ? When the user is filling out a form, based on the form field validation script I want to be able to invoke a new service. The javascript could
-
Can someone help me: what is the best form of video to use in AA CS 5.5? I need a compressed format that can be ftp'd etc but stuff like MP4 files don't work - Audition loads them but won't play them. I'm in PC, using XP. I have QT Pro and it is ful
-
create or replace function t_recovery(branch number,t_prd varchar2,t_date date) return varchar2 is v_var varchar2(30):='0.00|0.00'; begin begin SELECT INT_REC INTO V_VAR FROM select to_char(sum(prn_rec),'9999
-
Hi everyone! I turned on my computer the other day and the icon for Safari was missing from my dock. I looked in the applications folder and it is no longer there. Does anyone know how I can get safari if I have no internet search engine? I