Re: gs60 - 970m randomly not detected

Quote from: gizakon on 01-July-15, 23:43:19I'm having this exact same issue with my GS60 2QE with the 1080p panel. Sleep no longer works, I have to shutdown everytime I commute, and after first boot...the 970m is no...

MSI launched its latest notebook series, the MSI Prestige series during Computex 2015.
This series apparently draws a lot of attentions not only from MSI fans, but also from those who crave for a simple, slim and elegant yet with high-performance lapt...

Similar Messages

ITunes freezes / will not open / will not sync / will not detect Iphone

I am having numerous problems with iTunes. A few days ago iTunes began to freeze after opening, or not open at all. If it did open, it would not detect my iphone and would freeze when I plugged it in.
After reviewing these forums, I completely un-installed and re-installed iTunes, Quicktime, all the Apple Support applications, and Bonjour. I had to do this several times. I also ran anti-virus software, registry error software, disk-error checking software, with no results. I also ran a system restore to a date when iTunes was working. Eventually I got to a point where iTunes would open somewhat reliably, although slowly. However it would still not detect my iPhone, would often freeze after I connected my iPhone. Additionally, all of my audio files (music and podcasts) would not be detected by iTunes, and their associated libraries would show as empty, however the files were in the correct location on my hard drive.
I do not know what to do from this point...I have un-installed and re-installed iTunes upwards of a dozen times now, that can not be the problem. To the best of my knowledge, this problem began happening at random; I did not install any new software or make any changes to my system immediately prior to these problems occurring. Right now, after another re-install I am back to a point where I can't even get iTunes to open. Any help would be appreciated.
My System info:
Computer: Asus Notebook UL50VT/UL50Vg Series
OS: Windows 7 Home premium
iTunes version: iTunes 10.1.1 for Windows 64-bit
iPhone: 4.2.1
Please Help!
Thank you

Try this open your music app and access the store from there first, once done then you can go to the iTunes store app, try it and see if it works

Hp g6000 dvd drive not detected in my computer, tried registry fix and still not working.

Hi i have a hp g6093ea laptop and for a couple of weeks now i have had my dvd drive dissapear from my computer.
i have the tried the registry thing where you delete the upper and lower filters and then restart laptop.
it worked then couple days later it was gone again.
i have removed the dvd from laptop and clean the connection and put it back still the same.
i was told to remove any burning programs and reinstall so i did that and the drive came back then after reboot went again.
the dvd drive ejects and has power and attempts to read the disk but its just not detected in my computer.
i have even been into the bios and put cd drive as boot first.,
then put my bootable xp pro disk in and it wont boot from the bios.
so i thought i would try an external drive to boot from bios, and it doesnt boot from there either.
i have had the drive randomly pop up in my computer and then after a restart it would be gone again.
so i cant put a fresh install on my laptop and i dont know what else i can do.
any help
thanks

How old is your laptop?
Have you had any other problems, besides the dvd drive, in the past few months?

Strange issue - XI somtimes process a file and sometimes its not detected

Dear friends,
We have a strange problem. Ill describe the situation:
We have a simple file to file scenario without any mapping or File Content Conversion. Daily a sender system puts a ZIP file on a server and XI processes this file.
The strange thing is that XI sometimes processes this file and sometimes its not detected at all. After our analysis we come to conclusion that its not random.
We have looked at almost everything. We have checked the:
File name;
Size of the messages.
Authorisation;
Users that are assigned to the processing job.
Has anyone experienced the same problem or does anyone has a suggestion?
Helpful points will be rewarded,
Kind regards,
Kamran

Hi Mickael,
There are no stupid questions, there are only stupid answers. So I hope my answers are not stupid
1. what is your Polling Interval of your Sender Agreement ? Once a day ? every 60s ? etc...
because you say that your Legacy put the file Daily.
Answer: The polling Interval is 400 seconds and Modification Check is 400000 Msecs
2. Are you sure that your Legacy does not put the file after or during the XI adapter try to catch it?
Answer: No Because Modification Check works perfectly and we get alerts if the file is modify during the process.
3. Does your filename is always the same ?
4. or Have you a filename which can changed and which is case sensitve (lowercase and uppercase).
Answer: It has always the same name and It starts with O2C.zip
5. What are the size of your failed file?
Maybe it's too big and maybe you have a timeout somewhere (for instance into the adapter log)
Answer: It's not too big, it varies from 20 MB to 100 MB and we know that we can process files up to 700 MB
As I told before we have checked everything. Its very strange...
Do you have any other suggestion?
Regards,
Kamran

[Potentially Solved] Touchpad sometimes not detected possible IRQ.

Edit:
Potentially solved: since adding the below entries to my bootloader I have not encountered the issue, or it may be just a coincidence.
append to the boot line: i8042.nomux=1 i8042.reset
I've been experiencing an issue for the last few years which has bugged me across two different brands of laptop, but has been very hard to debug due to how random the event seems to occur.
One in every 20 or so boots, the touchpad on my laptop (Lenovo Z500) is not detected; not just by X, but by the system as a whole, it's as if it has been physically disconnected somehow.
It will take a few good reboots for the system to detect it again, and the problem disappears for another few days/weeks
One strange thing I have noticed, is that when looking at the listing of interrupts during a 'failed touchpad boot', IRQ 12, which I believe is normally the touchpad, has vanished.
I'm not very clued up on these matters so I'm not sure how to start debugging this, and working out if the issue is down to my setup of the system or not.
Any ideas on what could be causing this?
Thanks.
Output of /proc/interrupts during a working boot:
CPU0 CPU1 CPU2 CPU3
0: 23 0 0 0 IO-APIC-edge timer
1: 16 723 9 10 IO-APIC-edge i8042
8: 0 0 0 1 IO-APIC-edge rtc0
9: 299 118 10 14 IO-APIC-fasteoi acpi
12: 845 21415 146 77 IO-APIC-edge i8042
16: 461 8993 74 44 IO-APIC-fasteoi ehci_hcd:usb1
17: 0 0 0 0 IO-APIC-fasteoi ath9k
23: 2 25 5 1 IO-APIC-fasteoi ehci_hcd:usb2
41: 5 22 0 2 PCI-MSI-edge xhci_hcd
42: 1557 1065 596 500 PCI-MSI-edge ahci
43: 11 2 0 0 PCI-MSI-edge mei_me
44: 266 0 0 0 PCI-MSI-edge snd_hda_intel
46: 4 28 26 1 PCI-MSI-edge i915
NMI: 0 0 0 0 Non-maskable interrupts
LOC: 3002 12958 2572 1842 Local timer interrupts
SPU: 0 0 0 0 Spurious interrupts
PMI: 0 0 0 0 Performance monitoring interrupts
IWI: 88 170 115 197 IRQ work interrupts
RTR: 1 0 0 0 APIC ICR read retries
RES: 367 332 393 431 Rescheduling interrupts
CAL: 129 71 24 58 Function call interrupts
TLB: 99 72 157 892 TLB shootdowns
TRM: 0 0 0 0 Thermal event interrupts
THR: 0 0 0 0 Threshold APIC interrupts
MCE: 0 0 0 0 Machine check exceptions
MCP: 2 2 2 2 Machine check polls
THR: 0 0 0 0 Hypervisor callback interrupts
ERR: 0
MIS: 0
Output of /proc/interrupts during a non-working boot:
CPU0 CPU1 CPU2 CPU3
0: 23 0 0 0 IO-APIC-edge timer
1: 9 235 2 11 IO-APIC-edge i8042
8: 0 0 1 0 IO-APIC-edge rtc0
9: 217 44 24 40 IO-APIC-fasteoi acpi
16: 96 2512 38 173 IO-APIC-fasteoi ehci_hcd:usb1
17: 0 0 0 0 IO-APIC-fasteoi ath9k
23: 3 25 1 4 IO-APIC-fasteoi ehci_hcd:usb2
41: 6 23 0 1 PCI-MSI-edge xhci_hcd
42: 1445 937 649 479 PCI-MSI-edge ahci
43: 9 3 0 1 PCI-MSI-edge mei_me
45: 11 10 4 39 PCI-MSI-edge i915
46: 93 80 94 0 PCI-MSI-edge snd_hda_intel
NMI: 0 0 0 0 Non-maskable interrupts
LOC: 1251 3465 1964 692 Local timer interrupts
SPU: 0 0 0 0 Spurious interrupts
PMI: 0 0 0 0 Performance monitoring interrupts
IWI: 76 97 47 79 IRQ work interrupts
RTR: 1 0 0 0 APIC ICR read retries
RES: 349 252 190 335 Rescheduling interrupts
CAL: 110 72 30 69 Function call interrupts
TLB: 101 52 817 651 TLB shootdowns
TRM: 0 0 0 0 Thermal event interrupts
THR: 0 0 0 0 Threshold APIC interrupts
MCE: 0 0 0 0 Machine check exceptions
MCP: 2 2 2 2 Machine check polls
THR: 0 0 0 0 Hypervisor callback interrupts
ERR: 0
MIS: 0
Output of /proc/bus/input/devices during a working boot (touchpad detected at bus 0011):
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/devices/platform/i8042/serio0/input/input0
U: Uniq=
H: Handlers=kbd event0
B: PROP=0
B: EV=120013
B: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
B: MSC=10
B: LED=7
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input2
U: Uniq=
H: Handlers=kbd event1
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
U: Uniq=
H: Handlers=event2
B: PROP=0
B: EV=21
B: SW=1
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
U: Uniq=
H: Handlers=kbd event3
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
I: Bus=0019 Vendor=0000 Product=0000 Version=0000
N: Name="Ideapad extra buttons"
P: Phys=ideapad/input0
S: Sysfs=/devices/platform/VPC2004:00/input/input5
U: Uniq=
H: Handlers=kbd rfkill event4
B: PROP=0
B: EV=13
B: KEY=1400800100c03 400000000300000 0 0
B: MSC=10
I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
S: Sysfs=/devices/platform/pcspkr/input/input7
U: Uniq=
H: Handlers=kbd event5
B: PROP=0
B: EV=40001
B: SND=6
I: Bus=0003 Vendor=13d3 Product=5170 Version=0730
N: Name="Lenovo EasyCamera"
P: Phys=usb-0000:00:14.0-4/button
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/input9
U: Uniq=
H: Handlers=kbd event6
B: PROP=0
B: EV=3
B: KEY=100000 0 0 0
I: Bus=0001 Vendor=10ec Product=0269 Version=0001
N: Name="HDA Digital PCBeep"
P: Phys=card0/codec#0/beep0
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input8
U: Uniq=
H: Handlers=kbd event7
B: PROP=0
B: EV=40001
B: SND=6
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Mic"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
U: Uniq=
H: Handlers=event8
B: PROP=0
B: EV=21
B: SW=10
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Headphone"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
U: Uniq=
H: Handlers=event9
B: PROP=0
B: EV=21
B: SW=4
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH HDMI/DP,pcm=3"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input12
U: Uniq=
H: Handlers=event10
B: PROP=0
B: EV=21
B: SW=140
I: Bus=0011 Vendor=0002 Product=0007 Version=01b1
N: Name="SynPS/2 Synaptics TouchPad"
P: Phys=isa0060/serio1/input0
S: Sysfs=/devices/platform/i8042/serio1/input/input6
U: Uniq=
H: Handlers=event11 mouse0
B: PROP=5
B: EV=b
B: KEY=e520 10000 0 0 0 0
B: ABS=660800011000003
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:35/LNXVIDEO:00/input/input13
U: Uniq=
H: Handlers=kbd event12
B: PROP=0
B: EV=3
B: KEY=3e000b00000000 0 0 0
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:03/input/input14
U: Uniq=
H: Handlers=kbd event13
B: PROP=0
B: EV=3
B: KEY=3e000b00000000 0 0 0
Output of /proc/bus/input/devices during a non-working boot:
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/devices/platform/i8042/serio0/input/input2
U: Uniq=
H: Handlers=kbd event0
B: PROP=0
B: EV=120013
B: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
B: MSC=10
B: LED=7
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input3
U: Uniq=
H: Handlers=kbd event1
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
U: Uniq=
H: Handlers=event2
B: PROP=0
B: EV=21
B: SW=1
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
U: Uniq=
H: Handlers=kbd event3
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
I: Bus=0019 Vendor=0000 Product=0000 Version=0000
N: Name="Ideapad extra buttons"
P: Phys=ideapad/input0
S: Sysfs=/devices/platform/VPC2004:00/input/input6
U: Uniq=
H: Handlers=kbd rfkill event4
B: PROP=0
B: EV=13
B: KEY=1400800100c03 400000000300000 0 0
B: MSC=10
I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
S: Sysfs=/devices/platform/pcspkr/input/input7
U: Uniq=
H: Handlers=kbd event5
B: PROP=0
B: EV=40001
B: SND=6
I: Bus=0003 Vendor=13d3 Product=5170 Version=0730
N: Name="Lenovo EasyCamera"
P: Phys=usb-0000:00:14.0-4/button
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/input8
U: Uniq=
H: Handlers=kbd event6
B: PROP=0
B: EV=3
B: KEY=100000 0 0 0
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:35/LNXVIDEO:00/input/input9
U: Uniq=
H: Handlers=kbd event7
B: PROP=0
B: EV=3
B: KEY=3e000b00000000 0 0 0
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:03/input/input10
U: Uniq=
H: Handlers=kbd event8
B: PROP=0
B: EV=3
B: KEY=3e000b00000000 0 0 0
I: Bus=0001 Vendor=10ec Product=0269 Version=0001
N: Name="HDA Digital PCBeep"
P: Phys=card0/codec#0/beep0
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input11
U: Uniq=
H: Handlers=kbd event9
B: PROP=0
B: EV=40001
B: SND=6
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Mic"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input12
U: Uniq=
H: Handlers=event10
B: PROP=0
B: EV=21
B: SW=10
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Headphone"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input13
U: Uniq=
H: Handlers=event11
B: PROP=0
B: EV=21
B: SW=4
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH HDMI/DP,pcm=3"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input14
U: Uniq=
H: Handlers=event12
B: PROP=0
B: EV=21
B: SW=140
Last edited by kYd (2014-07-01 18:11:45)

Hi gav989,
welcome to the forums. Please have a look at our forum etiquette, esp. at the "Pasting Pictures and Code" section.
The image you posted is too big, but only slightly, so I leave it there for now. You may want to look at these screenshot posting rules as well.

Ultra 60 keyboard not detected

Hello, I have an Ultra 60, 2X450MHz, 2GB RAM, 2X 50GB HDD, Creator 3D. I recently used the Solaris 10 CD-ROM to format>analyze>purge the hard disks, which went without errors. Now I connect a Sun Type 5c KB/Type 5 mouse, and one of the following occurs at boot seemingly at random:
1. OBP message above banner "cannot detect keyboard layout fe (or c2 or co" and "using USA keyboard layout" followed by banner with "Keyboard present" therein; however when keys are pressed, only repeating 3's or "Keyboard error" appears after OK prompt. Or...
2. No message above banner, but banner displays no keyboard present; same 3's repeating or error upon keypresses. Or...
3. No banner at all, but message "keyboard not detected, sending input/output to ttya".
I am using this keyboard right now on an Ultra 5. I have tried another Type 5c and a Type 6 on the Ultra 60 with the same results. My questions:
1. Is this an OBP fault? How to serial console to this machine without it having a hostname in order to update the PROM?
2. Is this a mainboard fault, like in the keyboard jack or something? Do I need a new mainboard?
This happened overnight. The only thing I can think of that I did was that I used a Belkin adapter (with PS/2 ports and VGA port) to purge the hard disks, then plugged in a Sun KB/mouse along with a display adapter as soon as I acquired them. I am lost! Any thoughts or solutions would be appreciated. Thanks!

See my thread here
PS2 keyboard/mouse causes random shutdowns or doesnt work
In short there is no known solution, it is an manufacturing fault, usually swapping to USB and enabling USB keyboard and mouse in the BIOS will help.

Access Connections Windows 7 Not detecting port

hey everyone, been having this issue where a windows 7 machine does not detect a local lan port when docked in thus not switching off wireless and onto the LAN. I've been running all of the other XP machines and it appears that they detect and ask which location they are. All of the machines don't have gateways on them. is there a way to get the windows 7 machines to detect and switch over without using a gateway?
Thanks

Hi, yesterday i talked to HP customer support executive and he provide me following link : http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_147188_1&swEnvOid=4063# After installing the driver the issue was same but at night when i was surfing internet using LAN cable all of sudden i saw "Device Driver Installation" notification at right down corner of my laptop. I was using LAN cable since my Wifi was creating problems. After that i opened device manager and i was shocked because all network driver including bluetooth, wifi are there in network adapter tab. I reboot my laptop more then 10 times and i observed wifi is working fine. I am not getting why my laptop behaving so random.

PC not detecting drives, won't boot up passed HP Splash

Hey, so randomly two days ago I left my PC on and awoke to it frozen on the HP start up splash. Going into the bios I realize my hard drive is not detected, later on my CD drive stopped being detected. I ordered a new hard drive and I'm still getting the same problem.
I've done everything the support site says. I've switched back and forth between my new and old hard drive. I've tried switching the SATA ports its connected to on the mobo, I've tried disconnecting each piece of hardware one by one, but it still won't detect the drives. Still won't boot up Windows.
The only thing I can do is run a linux off a USB Stick, but if I try to install of course, there's no hard drive detected. This can't be a mobo problem, can it?
Please help, this is what I'm running.
HP Pavilion p6310y
Athlon ll X4 2.8GHz,
6GB DDR3,
1TB SATA,
DVDRW,
Win 7 Home Prem 64-bit.
the new HD is a 2tb WD SATA, so I don't see why that would be a problem either.

The Pegatron M2N78-LA (DDR2 & DDR3 versions) motherboards are dying. Specifically the chipset on the motherboard dies which results in not detecting any drives. HP Customer Support does not have it on a recall list and could not offer any real solutions. Many have resulted in changing the motherboard to other MicroATX boards compatible with the HP (but you'll need to also puchase a new copy of Windows7). Others have replaced it with the same motherboard from ebay (make sure you use the correct memory version)... however it is likely that the same motherboard would fail again.
See this thread. I had to replace one myself with another MicroATX board.
http://h30434.www3.hp.com/t5/Desktop-Hardware/m8530f-desktop-PC-with-a-m2n78-la-mother-board-doesn-t...
If your model does not use the M2N78-LA (Stamped Right on the Motherboard) this would not apply.

Supported device not detect

More specifically:
"The audio device supported by this application is not detected. The application will exit."
Before anyone states the obvious, yes, I realize there are a billion threads identical to mine, but none of them relate to my problem.
Thing is, drivers work fine, sound works fine, but periodically, I become unable to enter the "Graphic Equalizer" and instead the above error shows up. A reboot usually fixes it, but still, it becomes surprisingly annoying in the long run. My card is a standard Audigy 2 ZS, nothing especial.
It also baffles me how many other people are having semi-identical problems with no apparent solution, except random acts of "altering" your setup... Google only helped me see how many people were having the same problems.
Feel free to bash me if I'm just being oblivious, I'm just interested in a fix.Message Edited by the-bobcat on 0-24-20070:0 AM

I had a similar problem to this on a winXP upgrade. My original config. included a 98SE o/s and after the upgrade my desktop accepted the new o/s and interface was complete. With use there was a break down of driver reliability and the system became more and more temperamental. Nowadays I have to multiboot & run parallel driver sets (C:\98SE Vs D:\WinXP) on virtual disks for? a 20Gb harddri've with fat32 Vs ntfs. Sounds to me like your supported deveice could use some driver support (ie: there's conflict in the engine room captain)...

MSI B85M-G43 could not detect Gigabyte R929OC 4GB 3X Windforce

I recently build a new PC a month ago and have been using it for 3 weeks then random black screens problem started to occur.
It started right around the time after I updated to catalyst 14.4 w/o the beta. At the same time i noticed windows update has updated some files which i did not note down what it was. Also Noticed that startup list had some new programs running.
I proceeded to disable the programs in startup, undo the latest windows update and finally reinstalled windows 8.1
Nothin works and I am left with black screen, which i realised that to be actually the mobo not detecting the card once i got a vga screen plugged in to mobo onboard graphics and went to BIOs to see.
Previously my BIOs were updated to latest through the liveupdate 5 program, which itself updated to liveupdate 6. For some reason I dont like programmes sitting at the back constantly checking for updates, so after updating those, I deleted all those programs. The updates also took forever to download, I figured i will download/install individually in future. Now that I do a search there is no live update 6?
Just to make sure, I have reflashed the BIOs to E7823IMS v3.6 again through the m-flash inside BIOs, but did not choose the BIOs + ME option as i dont know what it is. After reboot, BIOs version remained there, checked for ME and there's the version number 9.0.21.1462.
BIOs version: E7823IMS v3.6
ME version: 9.0.21.1462
Prior to the Win8.1 reinstall, my OS was sitting on my SSD in non UEFI mode, I chose to install in non-uefi as i dont know what it was then. When i tried to reinstall, somehow the boot priority identified the SSD as UEFI first, so i wanted to give it a try and proceeded to install win8.1 in UEFI until reboot failed. Then I decided to installed my win8.1 on my HD in non UEFI instead. The system, as usual, works using the integrated graphics and mobo could not detect the graphics card in the only PCIe 3.0 x16 slot. Should I plug it into the PCIe 2.0 x16 slot and try, It never occur to me until now as I thought that was the only slot my graphics card could use.
Please help
Here are my specs:
MSI B85M-G43
Intel i7-4770 3.4GHz
G.Skill Ripjaw 1600MHz (2 x 8)MB Blue
SSD Samsung Evolution 240GB
WD 1TB Blue
Gigabyte R929OC 4GB 3X Windforce
LG 24x DVD Writer
Corsair Carbide Air 540 Case
SeaSonic G-750 80+ GOLD Power Supply
ASUS PCE-N53 PCI-E Adapter
Windows 8.1 OEM
Qnix QX2710 Evolution II 27" matte PLS monitor (uses dual-DVI-D connector only)

try to update your bios again but use the BIOS + ME option as it will flash not only your bios but Intel ME at the same time.
Note: Don't remove your USB during bios flash as the system will restart for I think around 2 times and plugging out USB might kill the MB bios.
Did you modify any settings in the bios setup??
If updating bios not can't work, try to plug your card to second PCIE slot and see if it could boot or not.

Internet Connectivity Issues, 511 CPU Fan not detected

Hello,
I have been experiencing some issues with my HP ENVY Pohenix 800-060 (running Windows 8.1) PC lately.
My internet connectivity has been acting crazy. Pages won't load fully. For example, when I am on Facebook I can't scroll down and have more posts load. I have to hit refresh and sometimes it will let me scroll down further than before. To load sites sometimes I have to hit refresh. If I am using just the wifi I am constantly connecting and disconnecting at totally random intervals but it's stable if I use an ethernet cable (however the other issues still persist). Images won't load fully as seen here
Also, starting yesterday when I restart my computer I get an error message that says 511 CPU fan not detected. I have opened my computer and dusted the fan and I have also unplugged it and plugged it back in to the motherboard to make sure it's securely connected. What's strange is that this only happens about 8 out of 10 times when I start my computer, and if it does happen I can simply touch the fan to get it started and it will work just fine until I turn my computer off.
I noticed in the HP Support Assistant that if you update to Windows 8.1 it says that you may experience internet connectivity loss and hardware problems so I don't know if these problems are related or not. I have checked and my drivers are up to date according to the HP website that searches for updates for you.
I am currently backing up my computer and plan on resetting it to factory default if I can't find the source of these problems.

Eldrscrolls, welcome to the forum.
Please check the CPU fan thoroughly before using the computer futher. If it has failed you could fry the components. I don't know if it has liquid cooling, but if so, be extremely careful.
A System Recovery is a very good idea. After updating Win 8.0 to 8.1 on my HP Split, I had several problems, such as, wireless connectivity. I did the Recovery back to Win 8.0. It solved my problems. After a few days I gave Win 8.1 another chance. It has performed admirably. If the system is overheating because the CPU fan failed this could cause your problems, also.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

My new MacBook Air shut down +does not detect battery + won't charge

My MacBook Air is only a few months old and at random it shut down and when I restarted it the computer did not recognise a batter. I tried to charge the MacBook but the light on the charger did not turn on at all and the charger was not recognized at all. The MacBook does not detect any wifi's at all aswell

You have to take the computer to the Apple store to have it checked out.
Try resetting SMC before that.
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

MacBook Spillage - Battery Not Detected! - Every Thing Else Works Fine!

_*Okay I Don't Know If This Actually Qualifies To Be Under This Category, But It Must Have Something To Do With The Battery. Here's What Happened_.*
I Accidently Spilt Some Orange Juice On My Macbook On The Keyboard And In The Hole Between The Screen And The Keyboard Area. I Went In A Big Panic And Started Mopping Up The Spillage, Taking Every Key Off The Keyboard And Drying It, I Even Ended Up Taking The Top Bit Of The Computer Off To Dry It.
After That Struggle And Drying Up Every Bit Of The Liquid I Tried Switching On The Computer After Numerously Pressing The On Button It Managed To Boot Up And Even Into The Login Screen. I Tried Logging In But I Got That Random Error Telling Me To Restart My Computer So I Did, Once Again I Pressed It Numerous Times, And Then It Started Making An Alarm Like Noise, Eventually I Managed To Get It On And Logged In. But For Some Strange Reason My Airport Card Was Not Detected, (At This Point I Should Say It Was Plugged Into The AC Adaptor), And The Battery Had A Cross Over It, Oh And According To IStat Menus My Computer Was Running At -128 Degrees C, Very Unusual!
Now When I Spilt The Drink My Computer Was Updating, As I Had Recently Reinstalled Mac OS X Leopard 10.5, So I Tried Updating And My Computer Shut Down, This Happened A Lot Of Times And Even Shut Down During The Hard Ware Test, But I Never Managed To Get The Apple Logo Telling Me My Mac Was Booting Into OSX. So I Shut It Down And Left It For About 2 And A Half Hours Until Trying To Switch It On Again, It Worked (Well Maybe I Should Say Works) Perfectly Fine And Is What I Am Talking Off Now, As This Tragedy, Only Happened, What 3 And A Half Hours Ago. The Airport Works, My Computer Is Not Running A -128 Degrees C, Except My Battery Is Not Recognised There Is A Cross Over It, Now I Would Test Another Battery But The Only Other Person Who Has A Macbook In My House, Is Asleep As Is Is 4.00 am, In The United Kingdom!
I Don't Know Why Only My Battery Is Not Working As The Juice Went Inside My Computer And You'd Expect The CPU Or Something Else To Not Work, It's Quite Strange!
*_If Anyone Could Give Me Some Advice Or Help With This Problem It Would Be Highly Appreciated!_*
*_Thanks In Advance!_*

Same thing happened to me,
I spilled orange juice on my Mac and after drying I tried to restart it,
it did, and then it would shut down and get error messages. I took it to the apple repair center and they said the motherboard was damaged. They actually recommended I just buy a new one, since replacing the motherboard would cost about the same. The battery doesnt charge, I have to use it with the ac adapter, and a few weeks ago, the hard drive crashed. I had to go and replace that. Then, the battery on my mac started to swell and when I took it in they said the battery had been recalled, so they replaced it. I just got it yesterday, dont need it since it wont charge, however this morning my mac started to shut down automatically, it did it over and over again until I took out the battery. Strange........... So far it hasnt shut down,
Thats my luck with my Mac,
Hope this helps

IPod Touch, not detected in Windows or iTunes...

First of all, hello to everyone...
i want to say that i read a lot EVERYWHERE about my issue and still i couldnt find a solution...
the problem is easy, i have a 3rd gen ipod touch, OS 4.2.1 now fully working... but, it's not detected in windows or itunes, as simple as that, and as u all have read in lots of other posts...
my ipod is now working because i took it to an apple store and they charged it in a MAC and they had no problem at all. the MAC detected the ipod, with all its content and my ipod's name...
but when i took it home -this has been hapenning since maybe... 5 MONTHS!-, i plug it in my PC and nothing happens...
ok, first of all, my spec... win vista home premium 64 bits, last version of itunes...
i tried ALL the solutions provided in APPLE official support page, and nothing happens... that means:
1- completely uninstall itunes and then reinstalling it... i ALSO FORMATED my entire hard drive twice!!!!
2- tried all USB ports and even an entirely different PC and nothing happened
3- bought 3 different IPOD to USB cables and nothing happened
4- tried setting ipod to restore, that way itunes SOMETIMES detected the ipod but i coulnt restore because of different error codes, so i had to take it several times to apple store to "unblock" it...
the only way it works -detection and charge- is with MAC computers or dock systems such as an iHome my gf has thats the way im charging it now, but otherwise it wont work...
i would really appreciate any help, since idont know what else to do!!
thx in advance!!

HI I was having some other problems getting my itouch to restore because it was not being recognized in itunes and kept erroring out. Now it has finally restored after I updated all kinds of drivers and removed and reinstalled itunes and apple software a million times,(yes this is all after installing itunes 8.1 and paying for an itouch upgrade as well) Now itunes says it cannot do anything with the ipod because it is getting an invalid response from the device. So it won't put anything back on my itouch or even show that I have plugged it in. I emailed tech support, If I find anything out I'll let you know, will you do the same for me?

Fax not detected,Comm error, fax run test is all PASS,

Hi Good Day! Im Using a HP color Laserjet Pro MFP M177fw. The Problem is sending fax messages. I do all the updates you need to installed. but the problem with my hp fax machine is still there specially i still receive a fax not detected issue,comm.error, but when i run the fax test run..the result is all PASS. especially the active tel.line,correcrt port on fax machine,tel line current test,dial tone..all the question and are PASS. The firmware is updated like..20140914. Please help me for this kind of problem. Thank You!

Hi @ali_al , I can help you with the fax not being able to send faxes.
Check these settings on the printer:
Confirm the fax number:
Go to setup, fax setup, advanced setup, confirm fax #.
Turn off error correction:
Go to setup, service, fax service, error correction and turn if off.
Set the fax speed to medium:
Go to setup, fax setup, advanced setup, fax speed and select medium.
Turn off the private receive:
Go to setup, fax setup, advanced setup, private receive. Turn it off.
Test the fax.
I have provided a document with some steps to try to see if that will resolve the issue.
Cannot Send or Receive Faxes.
Please provide the following information so I can assist you better.
What type of connection do you have? (Analogue, DSL, Cable Modem)
Are you using the 2 wire phone cable?
Do you have distinctive ring set up on the line?
Is there any voice mail set up?
Do you have a answering machine? (Where is it connected to?)
Where is the fax cable connected to? (modem, wall jack)
Is there a phone also connected the printer?
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Re: gs60 - 970m randomly not detected

Similar Messages

Maybe you are looking for