RE: Help in changing the clip to match the sequence

Hi All,
I'm a novice using premiere Pro CS6 and having problems with something so hoping someone can advise.
Basically I've imported some clips into the project folder. the first clip i imported into the timeline gave me a pop up saying this clip does not match the sequence settings. i had obviously chosen the wrong settings but premiere recognised the mistake and prompted me. Now I opted to change the sequence setting and the clip worked and fitted fully in the program panel when played on there.
however when I choose another clip and drag it into the timeline, the clip has black sides and appears to be smaller in the program panel e.e. it is not fully fitted even tho the drop down is on 'fit' . I had no pop up asking me to change the clip to match sequence setting for this either.
How else do I match this clip to the sequence if no pop up come up to change it?
its prob well simple - but I cant work it out?? please help

Hey tstormSierra,
thanks for your ply.
The problem is that the clip I first put on the timeline was from someone who filmed a boring long clip of a karate fight, so there were no camera angles or view points to play around with. So i basically made edits by making cuts in the clip andplaying around using scale and positioning to give the impression of other camera angles.
Anyhow I cant delete that and put in the other clip as Ive worked hard on it already. I just wondered if there was a manual way of matching the sequence settings, cause all the clips are from the same camera and settings.
In regards to scaling the frame size - i did this and it looked fine, but when I came to use the stabilizer in came up with clip needs to match the sequence settings or somethign like that. This is where I'm struggling cause I cant work out how to to match it.

Similar Messages

Excel cannot open the file beacuse the file format or file extension is not valid. Verify that the file has not been corrupted and that the file extension matches the format of the file [help]

Hi,
I have a excel file that I have been using since beginning of year.
Yesterday, I tried to open it but a message comes out "
Excel cannot open the file beacuse the file format or file extension is not valid. Verify that the file has not been corrupted and that the file extension matches the format of the file"
After I click yes, the page is blank. The file is about 400kb in size.
I have try open and repair and third party repair program and not working also.
I would appreciate a lot if you can help me.
Thank you very much.

Per your post, this problem might be caused by malware on the affected machine.
http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2013/09/07/quot-cannot-open-the-file-because-the-file-format-or-extension-is-invalid-quot-opening-office-files.aspx
In order to clean your machine, run Microsoft Safety Scanner (http://www.microsoft.com/security/scanner/en-us/default.aspx) to kill the malware, and then repair Excel file itself.
If this is not the case, feel free to post back and let me know. Thanks.
Tony Chen
TechNet Community Support
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I need help with changing my verizon vm to the system voicemail

I need help with changing my verizon vm to the system voicemail

Deleting the iTunes account is not the solution as you will very likely lose any and all purchases ever made with the account.
If you cannot find the option on the site, contact iTunes support.

[svn:bz-trunk] 20725: Update the ClientConfigurationParser to match the ServerConfigurationParser changes that support destination-include directory-path attribute .

Revision: 20725
Revision: 20725
Author:   [email protected]
Date:     2011-03-09 10:56:05 -0800 (Wed, 09 Mar 2011)
Log Message:
Update the ClientConfigurationParser to match the ServerConfigurationParser changes that support destination-include directory-path attribute.
Remove the unchecked assignment in ServerConfigurationParser and just cast elements of the list.
Modified Paths:
    blazeds/trunk/modules/common/src/flex/messaging/config/ClientConfigurationParser.java
    blazeds/trunk/modules/core/src/flex/messaging/config/ServerConfigurationParser.java

Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

How can I select just the clips, or just the transitions?

If I have a timeline with 50 or more clips (or still shots, in my case) with cross dissolves between each one, I would like to select just the clips, or just the transitions, but not both. How do I do this?
Why? I am creating a video with hundreds of stills and a few video clips, and occasiionally need to change the duration of all stills at the same time (from 3 seconds to 4, for example). Or, if I want all of the cross dissolves to last 1:15 instead of 1:00, it would be nice to select and change them all at once. However, in both cases, I can't figure out how to select all 50 without having to Command-click 50 times.
Any ideas you have will be appreciated.
Bart

To perform the same duration change on just the transitions (cross dissolves, in this example), this technique will work:
Open timeline index.
Enter "cross" in the search box (or whatever transition you're wanting to change).
Select all cross dissolves in list (click one, then type Command-A).
Click the time strip in the top of the timeline area.
All of the transitions in the list should now be selected in the timeline.
Control-D to change duration.
Enter new duration.
Hit Return.
I hope this saves someone all of the time I spent on it today. I'm still ahead, though, thanks to Tom's help. This saved litterally hundreds of Command-clicks.
Bart

When exporting as aic cropping does not transfer the clips appear in the original size...

When exporting as aic cropping does not transfer the clips appear in the original size...how can I fix this?? Aic seems to be the best quality - least compressed - so I would prefer to use it rather than the other options.

ssprengel wrote:
And if you go to Develop, and make your filmstrip thumbnails a little taller to make sure all the badges are shown, does a missing indicator show up, there? Can you Export from Develop?
If you click on the Photos that Failed to Export collection at the top right does the photo it highlight have a missing indicator?
If you do a test export with just one photo, to your internal drive, does it work?
I adjusted the height of the thumbnails. Still no exclamation points or question marks as noted here.
Also, as to your second question, unfortunately no as noted here.
And as to your last question, I have tried several times to export them to my desktop (which would be on my internal drive, not external). I've even gone so far as to put a copy folder of my original NEF files onto my desktop (7 gb worth) to see if that would help me export...it didn't.

Error - The file must match the template type. Upload one file per language

hi,
Error - The file must match the template type. Upload one file per language and territory combination.
i am getting above error while registering RTF template in oracle application e -business suite using XML publisher admistrator responsibility.
My work :
i generated xml output using concurrent program.
for this i used standard PO report,
the executable name: POXPRPOP.
i designed the template using MS Office word (for RTF template)
for this :
<?start: body?>
<? for-each: G_Headers?>
VENDOR:
<?POH_VENDOR_NAME?>
<?POH_VENDOR_COUNTRY?>
PURCHASEORDER NO.
<?POH_PO_NUM?>
SHIP TO:
<?C_COMPANY?>
<?POH_SHIP_ADDRESS_LINE1?>
<?POH_SHIP_COUNTRY?>
BILL TO:
<?C_COMPANY?>
<?POH_BILL_ADDRESS_LINE1?>
<?POH_BILL_COUNTRY?>
<?end for-each?>
<?end body?>
saved this file as "Purchasing.rtf" on desk top
i registered data definition
name:purchase order data definition.
code : short name of concurrent program.
i try to create template Or register the template in oracle e-business suite.
name: purchasing template
code: concurrent program short name
type : RTF.
file : browse from desk top (purchasing.rtf)
language:english
territory: US.
but i am getting above error
could any one help to come out of this problem.
thank you
regarding,
sai krishna@cavaya

Hi,
I am getting the error as
The file must match the template type. Upload one file per language and territory combination.
I have checked the template name. It doesn't exist already. Please help me.
Thanks in Advance,
Jeganathan

I need to know how to edit a drawing - basically remove the arrows and text but at the same time match the background of the existing pic. then re add new text. how do i erase the arrows and text and arrows but match current background of pic. step by ste

i need to know how to edit a drawing - basically remove the arrows and text but at the same time match the background of the existing pic. then re add new text. how do i erase the arrows and text and arrows but match current background of pic. step by step explanation please beginner

Please post (a relevant section of) it right on this Forum.

6921 Wall Mount - The Clip to keep the phone on hook keeps falling out!!

Has anyone experienced this issue with the 6921 on-hook clips. We turn the clip around when the phone is wall mounted and it hold the phone in. But it comes out so easily, as soon as you lift the handset out it pulls the clips out!!! we have like 30 - 6921 phones that have done this. I need to know if its possible to get spare 6921 clips, because we need them, anyone have an info on this? Thanks

no, All the vendors I talked with say the phone is too new and not worth the money to fabricate yet. Not enough call for them.

Why is the view of the clip different then the view of the project?

why is the view of the clip different then the view of the project?

Yes you are correct, it is with the setting of the properties.
Where do i report this then if it is not with the SDK but the manual setting of properties.
Also, how do i alter this ussue with the SDK, what are the commands, does it have to be done only by Javascript?

Importing my video from my event library into my project library, it shows the full width of the clip, but on the viewing section, it's zoomed in and cut the sides of the video off. How do I stop this from happening?

When importing my video from the event library to the project library, it's zooming in and
narrowing the width of my footage. How do I stop this from happening?

In the project, double-click on the clip to open the Clip Inspector. In the Clip tab you will see an item about two thirds down labelled "Stabilization". If checked, uncheck the box "Smooth clip motion".
Stabilizing clips causes a zoomed in effect, with the extent of the zoom dependent upon how shaky the footage is. There is a slider beneath the check-box labelled "Maximum Zoom" - this can be draggged back and forth to adjust the zoom effect if desired, once the clip has been stabilized.
You may have chosen to analyze clips for stabilization when importing to iMovie (that's a choice provided by iMovie upon import). If so, it's best to turn off an option in iMovie's preferences. Go to this from the iMovie menu item iMovie>Preferences. Click on the Browser tab and deselect (uncheck) the box labelled "Automatically stabilize clips that have been analyzed".
I prefer to import clips without analyzing, as this speeds up the import process. Afterwards, in the Event you can check for any overly shaky clips, then analyze them in the Inspector. If necessary, once dropped into a Project, you can stabilize them as desired. You can also stabilize clips directly in the Project without having to first analyze them in the Event.
John
Message was edited by: John Cogdell

2 Problems while Distributing app Version Mismatch. Neither CFBundleversion ['1.1'] nor CFBundleShortVersionString ['1.1'] in the info.plist match the version of the app set in iTunes Connect ['1.1']

Since 2 days when I try to validate or distribute my app it says "Version Mismatch. Neither CFBundleversion ['1.1'] nor CFBundleShortVersionString ['1.1'] in the info.plist match the version of the app set in iTunes Connect ['1.1']". Today it also always says that the Network Connection was lost. Can someone tell me how to solve this problems?
Thanks

Thank you Bob
Ian
Ian Bennett
Lecturer
Department of Communication, Film and Media,
Anglia Ruskin University,
East Road,
Cambridge
CB1 1PT
[email protected]

HT204053 support states you can't merge apple ids, but it does give you an option to edit. Im sure there's a reason, but why can't I sign in to 1 account and edit the name to match the 2nd account?

support states you can't merge apple ids, but it does give you an option to edit. Im sure there's a reason, but why can't I sign in to 1 account and edit the name to match the 2nd account?

Shelady wrote:
... (wasn't even aware my gmail account had anything to do with Microsoft) ...
It doesn't. Gmail is owned by Google.
Shelady wrote:
Also can someone tell me how I report spam on my iPhone and iPad in a gmail account?
Report it to Google:

How do you match the video duration of multiple clips to match the audio?

If 'Windows Movie Maker' could do this..... come on! There's gotta be a way. I have multiple video clips that equal a duration of say 10 minutes. My audio file (that consists of 2 songs) equals say 7 minutes. HOW DO I SELECT ALL VIDEO CLIPS AND MATCH THEIR TOTAL DURATION TO EQUAL THAT OF THE AUDIO?

HOW DO I SELECT ALL VIDEO CLIPS AND MATCH THEIR TOTAL DURATION TO EQUAL THAT OF THE AUDIO?
It's called "editing".
If you don't want to do it, hire someone or fire up Windows Movie Maker.
On the other hand, Apple seems to be headed down the "design the software for the lowest common denominator" path lately. Perhaps Final Cut X can do this? You might ask over in that forum.
x

Changing a clip name in the Finder

What does happen if in the Finder I change the file name of a clip I have already mounted on the timeline of a project?

The clip goes offline in the application, both in the timeline and in the event browser.

RE: Help in changing the clip to match the sequence

Similar Messages

Maybe you are looking for