Re: Help with my car audio

haha. sorry. new at this. Ok. help me please i have a 2002 Mazda Tribute. I really want to get a new deck and some new speaker (speakers optional at the time). but i want a good deck, that is easy to use, but also good. Not super expensive. Does anyone know if this would work with it?
http://www.bestbuy.com/site/Kenwood+-+50W+x+4+MOSF​ET+Apple%26%23174%3B+iPod%26%23174%3B-Ready+In-Das​...
or do you have any other suggestions? and if you do give me a suggestion, can you give me a estimate on price (installation included from geek squad.)
Thanks!

dont get kjenwood!!!! get alpine or pioneer!!!! or jvc is good to. i have the jvc kdR 300 and its bomb!

Similar Messages

  • Help with vintage car audio circa 1967

    Is there any car deck or in deck/dash system which allows you to operate the ipod instead of using the deck/dash system to manipulate the ipod WHILE it still charges the ipod. I figured the last resort is to buy the itrip and a cigarette lighter cable, but i own a 1967 riviera and it only has am radio so that really doesn't work. If anyone can point me in the right direction it would be nice
    So far all the dash systems I have used, I can only manipulate the ipod through the deck/dash system which is very irriating since it takes forever to scroll.

    dont get kjenwood!!!! get alpine or pioneer!!!! or jvc is good to. i have the jvc kdR 300 and its bomb!

  • Pairing With Sony Car Audio

    Hi everyone, first time in ANY forum, just got my Iphone and am trying to pair it with my car audio...I seem to be close...just cannot figure out what the PIN is, does anyone know it, my last phone had a pin of 123...tried that, no go, any ideas?

    i belive the pin number is 0000, but i dont this will work cause i tried pairing off my wireles haedset and Iphone dose not support wireless music streaming (Advanced Audio (A2DP) profile). Try the pin and let me know if it works for you.

  • My IPOD 7th Generation is not compatible with my cars audio system. I had the IPOD nano 4th generation earlier and it was perfectly working on my car audio system. Is there any way i can make the IPOD Nano 7th generation compatible with my car audio syste

    My IPOD 7th Generation is not compatible with my cars audio system. I had the IPOD nano 4th generation earlier and it was perfectly working on my car audio system. Is there any way i can make the IPOD Nano 7th generation compatible with my car audio system?

    I am assuming you are using the Lightning to 30 pint adapter and it is not working?

  • Help with my car

    I have a 2011 Nissan Altima with the entertainment system.
    I have Apples Audio/Video cavle set.
    I have 5th Gen Nan (video) Pod.
    I used to have the 3rd Gen iPod Nano Video- it worked fine with my car.
    But the 5th Gen does not.
    I looked in settings but nothing stands out.
    Yes, the car in park & handbrake up.
    Any suggestions how to get video showing on mr car's screen?
    thx

    dont get kjenwood!!!! get alpine or pioneer!!!! or jvc is good to. i have the jvc kdR 300 and its bomb!

  • Help with front panel audio on K9N board.

    Okay, I admit I'm a bit of a moron with front panel audio but I just can't figure out how to configure this board with my case.  Here are the pins:
    Case:
    Mic In
    Mic Bias
    SpeakOut L
    Return L
    SpeakOut R
    Return R
    Ground
    Motherboard:
    PIN    SIGNAL                  DESCRIPTION    
    1    PORT 1L                  Analog Port 1 -Left channel    
    2    GND                  Ground    
    3    PORT 1R                  Analog Port 1 -Right channel    
    4    PRESENCE#     Active low signal -signals BIOS that a High Definition Audio dongle is connected to the analog header. PRESENCE# = 0 when a High Definition Audio dongle is connected.    
    5    PORT 2R                  Analog Port 2 -Right channel    
    6    SENSE1_RETIRN     Jack detection return from frontpanel JACK1    
    7    SENSE_SEND     Jack detectionsenselinefrom the High Definition Audio CODEC jack detection resistor network    
    8    KEY                  ConnectorKey    
    9    PORT 2L                  Analog Port 2 -Left channel    
    10    SENSE2_RETIRN     Jack detection return from frontpanel JACK2    
    I haven't been able to make any sense of the two, so if anyone here can help, I would appreciate it very much.

    Quote from: crazy on 09-June-06, 15:51:46
    You may tell us more information about your mainboard, please give us the detailed name of your mainboard. :D  Then there will be more users could give some suggestions.
    Sorry, there aren't that many K9N boards out there, but mine is the K9N Platinum MS7250 Version 1.0.  It's the AM2 non-SLI nVidia nForce 570 Chipset model.
    Thanks for any help.

  • Can anyone help with Bluetooth and Audio output conflict?

    Audio ouput from media files on Quicktime, Real Player and Windows Media will only play through my Bluetooth headset .
    I have tried resetting the Audio output preferences to no effect. Also tried reinstalling Bluetooth devices.
    When opening file the player returns the following message:
    "There was an error connecting to your headset. Make sure it is turned on and in range. The audio portion of the program you were using may have to be restarted."
    Please Help!
    Mac Book Pro 17" Mac OS X (10.4.7)
    Sorry for repeat but new to this.

    Hey DS.. Im having the same exact issue as you and Im sure alot of other people are as well... it seems to be touch and go. I currently own a Mac Mini Solo with an intel 1.5 ghz processor and I have a Motorolo H700 Bluetooth headset. I can get mine to work for a short while watching movies or what not or use it in iChat but then after so many minutes my computer has a spastic fit with the thing and i get the exact error message you described. However when I attempt to go back into my Audio Control Panel to switch audio from the BT headset back to the line out.. the control panel seems to freeze up as well causing me to reboot my entire system just enough to switch the audio back to the line out. I think that this is an issue on apples end that they need to update their blue tooth software or something as you really cannot update software to a BT headset only the device it communicates with. So I think in the meantime we are all screwed until apples gets off their butts and does something about this.

  • Help with "Error syncing Audio and Midi" message. How to fix?

    Hi,
    I'm running Logic Pro 7.1 on a G5 Dual 2.5 PowerMac. My audio interface is a Digidisign Digi002R, and my MIDI interface is a MOTU Fastlane. Up until a few days ago everything was working fine. I didn't install any new software or anything.
    All of a sudden in any Logic session I open (new or saved) I get all kinds of artifacts that sound like they're associated with sample rate problems.
    True to form, on playback after 4 or 5 seconds a message comes up telling me that there is an error syncing audio and midi. It tells me that a sample rate of 88209, or 88213, or 88207 (each time it's different) was detected, and that there is a conflict between Logic and my external device.
    My Digi002R is set to 44.1, and Logic is set to 44.1 as well. I have no idea where this problem came from.
    The only thing I do know is that I've been using the Peachtree Press Apple Pro Training Series to study for my Level 1 Logic certification. it comes with a CD with Logic sessions to use with the text. The CD comes with a Logic Epress Demo but I didn't download that as I've already got Logic Pro. I dragged those session files to my desktop, and the problem occured for the first time when iopened up that first session from the CD. After that, every single session has this problem and I have no idea how to fix it.
    Sorry for the incredibly long message, but can anybody help?
    Thanks
    PowerBook G4 15", PowerMac G5 Dual 2.5   Mac OS X (10.4.7)  

    Hey,
    Thanks. I appreciate the help, but I've tried all of that. I just don't get it. I've unplugged everything, I've shut down, powered down, relaunched everything a dozen times and the problem doesn't go away. I know that the problem is with Logic because the interface works perfectly fnie with everything else, from Pro Tools to iTunes.
    I'm having Logic Pro 7.2 shipped to me so I'm hoping that installing that will reset everything, but until then I can't do anything in Logic.
    Anybody ever encounter anything like this?

  • Can anyone help with a CS5 Audio Sync problem?

    making a simple game with video stills matching a running audio track
    my audio is an MP3 i built in GarageBand
    all works well in flash, but when rendered to QT, the audio and video go out of sync, and some video drops out too
    have put all audios on their own layer and streamed them all too, set settings in Publish to 64, but still have same problem
    any help?

    Sorry, can't help.  But misery loves company.  I have the same problem with Premiere.

  • Unable to get help with Broken car compuer module item purchased from seller.

    Hi,
    I am having issue with an item that I purchased march 15.
    The item I purchased was a bmw car light module computer which controls the light.
    On march 20th my machanic installed the part to my car and it over heated so, I contacted the seller on march 20.
    Seller said following:
    "The heating up thing I'm not sure about"......"I wouldn't feel comforatabl taking a return on a module that now might be damaged"
    Asked about operating temperature and seller kept on telling me he/she doesn't know.
    I have went to couple mechanics to get it working as they told me they couldn't program it.
    With refer I was able to find a machanic shop who specialized in programming and had it working after while.
    After having the part programmed it was working fine for couple days and now it random stopped functioning again.
    Going through multiple tests the mechanic told me it's the part that I purchased that's having the issue.
    I contacted the seller again few times regards to this and on June 23th, I asked seller he told me to go see bmw see if they can warranty it.  So I asked for documentation so I can actually make that happen as this product as described is a brand new part from bmw. after few message back and forth now seller says:
    "I don't have any documentation from the dealer purchase. I wish there was something I could do but after the 14 day return period as per ebay, warranties are not obligatory on my behalf. I'm very sorry your having this problem..but other than giving you an invoice from ebay, here I nothing else I can do"
    Telling me now that he has no part no receipt or no way for me to get this part warrantied.....
    On June 24th:
    I have told him that I got the part number from bmw dealer and the part plugged into the car over heated.  How is one supposed to know if part is over heating until it's not working and somone touches it??  This bmw part is the only thing that fits into the slot and there is no way anyone can install it wrong and if size was different it would not fit...  so I think I seller should be more worried about my car being damaged not his broken part that he sold me.
    I been wanting to make this work with this seller yet, he doesn't seem to help me make this work.
    I know the date is way past but with car parts I have to make numerous number of trip to the shop and make appointment,... also he sold brand new part from bmw why can't I get warranty on the part?
    I am making this post because with ebay contact help I wasn't able send them a message.
     

    You purchased on March 15.You received it and it was installed on March 20.The item does not work.So I asked for documentation so I can actually make that happen as this product as described is a brand new part from bmw.Did the mechanic say anything about this part being counterfeit? Most companies will not warranty items sold online, unless the item was purchased from an authorized dealer. Counterfeits are only part of the problem, since some resellers deal in returns, refurbishing, and ( occasionally/ rarely) even stolen stock.  also he sold brand new part from bmw why can't I get warranty on the part?What makes you think he is telling the truth about that? Liars lie. So the seller won't help.BMV won't help.  You are past the 45 day deadline for eBay Buyer Protection.Go to Paypal first, and start a claim for 'Item Not As Described'. PP has a 180 day deadline, but I am not sure that it covers NAD claims.  If that doesn't work, go to the credit card you really paid with (PP is just a useful mediator) phone the 1-800 number on the card and ask the customer service rep about a chargeback.

  • I need help with my iTunes audio configuration, its been giving me error messages for 3 weeks now!!!!

    I have been receiving this message for 3 weeks now," iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." I've tried uninstalling and even deleting my quicktime player and then installing it again. I've also tried uninstalling and deleting my itunes and then redownloading it again. I have also made sure that both are up to date, but still it gives me that **** error message. I cant listen to any of my songs or any new songs, please help.

    I have been receiving this message for 3 weeks now," iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." I've tried uninstalling and even deleting my quicktime player and then installing it again. I've also tried uninstalling and deleting my itunes and then redownloading it again. I have also made sure that both are up to date, but still it gives me that **** error message. I cant listen to any of my songs or any new songs, please help.

  • Help With a Custom Audio Spectrum I am Making

    So here is the plan, I want to make something like this:
    but in order to do that I need to use sound keys (which I have) and I don't know how to use it very well so please keep it simple when replying.
    So with sound keys, I can make rectangles move to the beat of music like in here (no they do not use the audio spectrum in this vid and duplicate it, so hear me out) they make solid layers of rectangles and make them move up and down to the beat of the music using ranges, I know what the ranges I need to use are in sound keys, but I do not know how to make the scaling work correctly. When I hook up the rectangles scale with the music, it moves both sides, people have said you need to move the pixels rather than the scale, so how do I do that, also when I hook it up it ends up being extremely small (the rectangles) so I need help solving these two problems, so please help me, remember I am a noob and have no idea how to use equations and stuff. Thanks!

    You need to move the anchor point for your rectangles to one side or the other so that, when they scale, they will only appear to move in one direction.
    If you're a "noob", you should really start here: Getting started with After Effects. The resources in that link will get you started in a way that will make you able to come up with this stuff on your own.

  • Help with NAS (Network Audio System) setup.

    Anyone having any ideas how to set up this? I couldn't find any documentation, no howtos, no help, just an obscure nasd.con.eg in the package.
    Has anyone managed to set up a client and a server for this system, it'd be really useful to me...

    Idd, seeking is hard and really hacky (:D) to implement with the two process solution. :\ You can use the
    extern-movie.sh 10.0.0.4 movie.mkv 124
    to seek where you want in the files, but you'd have to exit the script, then restart the script in the middle of a movie ... :\ Writing a plugin for MPlayer might kinda defeat the simplistic design of rsound. Shouldn't be hard to implement though. I made an rsound client in python in like 5 mins, so shouldn't be too hard.
    As for NAS: http://linux.die.net/man/1/nasd this helped a little, but it really looks like legacy software. "When the Network Audio System server starts up, it takes over /dev/audio."
    I've been trying to get nas up and running, and it wasn't hard to get it to play some stuff with mplayer, but it feels quite broken using the default config + mplayer. Might be my alsa emulation of course, but mplayer showed hickups, erratic framerate (-autosync 100 helped against this), bad sound quality, and a couple of crashes.
    You could try this from the command line. Shouldn't need to set-up any config file yet.
    sudo nasd -aa
    And running this in another shell:
    mplayer <movie> -ao nas
    Try it locally, not sure how to set up nas to connect to extern servers. :\
    Last edited by Themaister (2010-01-04 18:47:10)

  • Help with Powering m-audio firewire 410

    Hi to All
    I just got a Mac book Pro, and I own an m-audio firewire 410 interface. The Mac works wonderfully and I´m extremely happy with it and the 410 together.
    Does Anyone know if there is a way to power the interface with the AC adapter, whithout powering it through the 6 pin Firewire port when using batteries ?
    To My understanding, the 6 pin ports always can power devices.
    Thanks for Your Help, and sorry of any English glitch

    I have a MacBook Pro and a M-Audio Firewire 410. As we speak, I am running a six pin firewire cable to the Firewire 410 as well connecting it to the supplied AC power adapter. Nevertheless, I use it primarily with my PowerMac G5. When connected to the G5, I have both the 6 to 6 pin firewire connector and the supplied AC power power adapter connected and sending power to the unit. Nowhere in the manual does it say that you cannot connect the AC power adapter to the FW 410 while a six pin (powered) firewire cable is in use. It does say that the AC adapter is included to power the unit when a computer with four pin firewire ports (the kind that don't supply power) is connected to the FW 410. As bus power from a firewire port is often the victim of RFI from the components in the computer, I was advised by M-Audio tech support to utilize external power whenever feasible to increase the SN ratio on the device. So basically they told me to connect both at the same time. I assume that the FW 410 knows when it is receiving power from the AC adapter and knows to not utilize the power from the firewire bus simultaneously. If you are really worried, I suggest you call M-Audio tech support and let them tell you what I just did. One final thought: I have used my FW 410 with two power sources (firewire and DC in) for the two years since I've had the unit. It doesn't work as well as it used to...now that the drivers have improved, it works much better a than it used to. I hope this answers your question.
    2GHz DP PowerMac G5 (generation uno) / MBP 15" 2.16 GHz   Mac OS X (10.4.6)   4 GB RAM & 6800 Ultra Nvidia Graphics / 2 GB RAM
      Mac OS X (10.4.6)  

  • Need help with the T400 audio driver.

    I recently purchased a refurbished T400 (type 6475-GS6) at a great price.  I've installed XP 64, downloaded then installed all, or what I thought was everything from the Lenovo web site.
    But for the life of me, I can't install the Conexant audio driver because the device driver installation wizard can't find the device for the driver.
    Does anyone have a suggestion?
    Thanks in advance for your time and help.
    Dale

    You might need KB888111.
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Maybe you are looking for