Re: how data is captured by area

Hi All!
Can anyone tell me how to revise data passing through to GL account details. Let me elaborate the question.
a.) I need to know how all sales documents should pass through material, customer, order, quantity to any relevant account.
b.) I need to know how any warehouse transaction should post material, quantity, order, PO.
c.) How vendor related documents should pass vendor, material, quantity, PO.
Can anyone explain me what the user exactly needs. Any suggestion would be highly appreciated. I will assign points ofcourse.

Good morning,
I'm Italian, so my english is bad.
I must transmit video with RTP protocol. The output of webCam is RGB 24 bit.
The class "VideoTransmit" cause error.
"Failed to build a graph for the given custom options.
Cannot build a flow graph with the customized options:
Unable to transcode format: RGB, 320*240, framerate=15, 24 bit to: JPEG/RTP 320*240, framerate = 15. "
I don't understand.
What's the problem?
Thank you
Robot84

Similar Messages

  • How can I get missing contacts, notes, calendar dates and reminders that are just on my old iphone onto the iCloud for transfer to my new iPhone upgrade?

    Dear wise & wondeful people:
    How can I get missing contacts, notes, calendar dates and reminders that are just on my old iphone onto the iCloud for transfer to my new iPhone upgrade? Half of my contacts, notes, ect. were on my iCloud so have happily moved to my new iPhone but the rest are completely resistant. For example, on my iCloud I have 14 missing contacts starting with the letter A alone, however they are happily viewable on my old iPhone 4S and won't budge over into the iCloud.
    There are also 3 notes missing yet still acessible on my onld iPhone 4S, the list goes on.
    Your help would be most appreciated. Thank you so much.
    BCHR

    Hi BCHR,
    If you are having issues transfering your content from your old iPhone onto iCloud so it can be transfered to your new iPhone, you may find the following articles helpful:
    iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device
    http://support.apple.com/kb/HT2109
    iCloud: Troubleshooting iCloud Contacts
    http://support.apple.com/kb/TS3998
    iCloud: Troubleshooting iCloud Calendar
    http://support.apple.com/kb/TS3999
    iCloud: Notes overview
    http://support.apple.com/kb/PH12081
    Regards,
    - Brenden

  • In ALV reports how can we capture separate data in 3 internal table

    HI
       In ALV reports how can we capture data in 3 Internal tables and combine them in another internal table to display........

    Hello Sudhanshu
    Another option would be to display all three itabs together which is a piece of cake using OO-based ALV lists. Please refer to thread
    Re: Alv
    for a sample report.
    Regards
      Uwe

  • How many types of ports are there which we use for data transfe in ale/idoc

    friends let me know how many types of ports  are there which we use for transfering
    data in ale/idocs?

    Hello,
    you can use file port,trnasactional RFC port.FI you are using IDOC-XML conversion combination,then you can XML port also.
    Thanks

  • Since upgrading my iPhone 5 to ios 7, I cannot get the internet, email to work on 3g.  I get the message ""could not activate mobile data network. You are not subscribed to a mobile data service".  How do I fix it?

    Since upgrading my iPhone 5 to ios 7, I cannot get the internet, email to work on 3g.  I get the message ""could not activate mobile data network. You are not subscribed to a mobile data service".  How do I fix it?
    I've contacted o2, tried all of their suggested updates and changes, reset my phone 3 times and still no luck.
    Any help appreciated.
    Thanks,
    Louisa

    Hi, l have the same problem, were you able to resolve?

  • What are the advantages of idoc compare to flat file. how data is secure

    what are the advantages of idoc compare to flat file. how data is secure in idocs compare to flat file

    Hi Ramana,
    In simple words, Main advantage with idoc over flat file is security....
    I will explain you some scenario here U got a flat file with all the data...Now u r having the flat file if you want u can modify the data in it, or somehow any one can modify the data in it  if they were able to access this file. That means u maintained the file in the presentation server
    One level of higher security to the above level is maintaining the flat file in application server, at point also even though lot of people r not having the access to that file, super user who is  having  the access may modify the data or delete the data from it rite....
    so in both of those levels u don't have 100% security...
    So there come to the picture of idocs, Idocs simply data carriers, those r generated by a program but not manually...data will be divided into number of segments based upon ur program. So manually its not so easy to modify the data in these idocs. If any changes to be made in the data then u have to modify the data in the application and then u have to update the idoc or you have to generate the new idoc with that corresponding data. so in this case not even super user can manipulate the data directly in the idoc....
    I think u got my point what I mean to say.....
    If you find it useful mark the points
    ~~Guduri

  • How do you capture a picture of someone you are ta...

    How do you capture a picture of someone you are video chatting with?

    Please see this FAQ.
    Taking a video snapshot of another person
    Regards,
    Tamim
    Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hour
    If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.

  • How to copy data from one planning area to other planning area

    Hi ,
    I need to copy data from one planning area to other planning area, the MPOS for two planning areas are differant and  here my scenario is one planning area having extra key figures.
    First i need to release forecast data to CIP planning area and then,  i load the data from infocube  to MPS planning area and copy the data from CIP planning area. here both MPS and CIP planning areas having different MPOS .
    Please help me in this. Please give me the stepls i need to follow.
    Thanks in advance.
    Regards,
    Chandu

    Hi,
    You can use the transaction /sapapo/tscopy.
    In this you can configure your source plng area and destination plng area. You also have an option to map your KF. There is no problem if the MPOS are different as long as you are able to map the characteristics between the 2 MPOS.
    Alternatively, you can create an Infocube which shares common ground between the 2 planning areas and extract data from CIP plng area into the infocube and then copy teh data from infocube to MPS plng area using the the transaction /sapapo/tscube.
    Hope this helps.
    Thanks
    Mani Suresh

  • How to extract data from SNP Planning Area

    Hi All,
    I am trying to extract data from SNP Planning Area. i had created the data source as it is given in help document but when i try to test the data source for the data through extractor checker it gives a message "0 data records selected".
    So please help me out if some body have some document in the regard pl forward it to my mail id [email protected]
    Thanks in Advance.
    Best Regards.
    rahul

    Hi Ganesh,
    In SNP you do not have to go to RSA6 u can create datasource in S&DP Administration>change planning area>Extras-->Data Extraction Tools.
    from there u can do all the settings and can as well test.so there is no use of either RSA6 or RSA3.
    bets regards,
    rahul

  • In v.11, how can I capture video but not audio from a camera?

    In v.11, how can I capture video but not audio from a camera?

    Rodney
    I see what you mean....Premiere Elements 10 appears to be the last version that had options for the user to select Capture Video and/or Audio in the its Capture Window.
    If you are doing DV data capture firewire into the Premiere Elements 11 Capture Windows and want a final file without audio and you cannot do this at the camera level, then consider....
    1. Do the Capture "to the Timeline" - video linked to audio result on the project's Video Track 1
    a. Right click the Timeline DV AVl and select Delete Audio and then edit accordingly.
    or
    b. Import the DV AVI but, when you go to export it, in the export settings, remove the check mark next to Audio so that the export contains only the video portion.
    Publish+Share/Computer/AVI with Presets = DV NTSC Standard
    Please let us know if any of that worked for you.
    Thank you.
    ATR

  • How do I capture good stills from video on Photoshop Elements 8?

    I'm using Photoshop Elements 8.  When I try to capture still photos from video clips, the results are not very satisfactory.  Usually the stills are very unclear, not sharp like I want them to be.  I have to make many attempts to capture a still before  I can get one that's halfway clear.   Does it have to be this way?   What can I do to get consistently clear stills from video?  Thank you!

    Fair enough, Barbara.  Thanks!
    Lewis B.
    Date: Wed, 30 Oct 2013 18:08:37 -0700
    From: [email protected]
    To: [email protected]
    Subject: How do I capture good stills from video on Photoshop Elements 8?
        Re: How do I capture good stills from video on Photoshop Elements 8?
        created by Barbara B. in Photoshop Elements - View the full discussion
    Frame from Video is  more or less a legacy feature in PSE 8. It was meant to capture a frame or two from a short homemade video at a low resolution. It doesn't do HD video at all, and isn't meant for a clip that's more than a minute or so in length. It's been dropped from the latest version because nobody has those kinds of movies anymore.
    So the bottom line is you're better off doing this with some other program than with PSE.
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5802253#5802253
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5802253#5802253
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5802253#5802253. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Photoshop Elements at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • How do you capture a view as an external file?

    I am trying to write an interface using C++.NET. So far, everything is working well. It connects the database to a pre-designed recordset and accepts SQL commands.
    The next step is to input SQL commands to create Views. In order to use those Views in my interface, I believe they need to be stored in some external file that would be accessible to my interface application.
    How can I capture and store Oracle 10g XE Views ?

    I'm still not sure we're talking the same language here.
    PL/SQL is the programming language.
    SQL is the query language. PL/SQL can contain SQL statements.
    Views are stored queries, not stored result sets. You might create a view as
    SQL> CREATE OR REPLACE VIEW employee_departments AS
      2  SELECT e.empno, e.ename, d.dname AS department
      3  FROM   emp e
      4         JOIN dept d ON d.deptno = e.deptno;
    View created.
    SQL> desc employee_departments
    Name                          Null?    Type
    EMPNO                         NOT NULL NUMBER(4)
    ENAME                                  VARCHAR2(10)
    DEPARTMENT                             VARCHAR2(14)
    SQL> SELECT * FROM employee_departments
      2  WHERE  department = 'SALES';
         EMPNO ENAME      DEPARTMENT
          7499 ALLEN      SALES
          7521 WARD       SALES
          7654 MARTIN     SALES
          7698 BLAKE      SALES
          7844 TURNER     SALES
          7900 JAMES      SALESHowever the base tables are read and the join repeated whenever the query is issued - the results are not stored anywhere and it does not make sense to talk of putting them in a file. What if the underlying data changes? Your users read from the file and get the old results. Oracle provides mechanisms for handling application cache structures but it's advanced stuff (I've only read about it, I'm not a 3GL programmer myself) and I would have thought not suitable for someone trying to put up a simple application quickly.
    You said you can get your C++.Net application to connect to the database and get result sets. Just use that same approach when accessing the views you have created. You don't need a 'file'.
    > Most users of consumer software dont really want to spend the time and effort to familiarize themselves with the workings of a sophisticated database. Ideally, for them, they don't even know a database exists in conjunction with their application.
    I still don't see what this has to do with anything. No they will not be familiarising themselves with the workings of a database, they will be interacting with your fine application.

  • I need to back up my imac running Tiger (no time machine) so that we can upgrade OS. It is set up for multiple accounts.  How do I capture all files in each account using newly purchased USB external hard drive?

    I need to back up my imac running Tiger (no time machine) so that we can upgrade OS. It is set up for multiple accounts.  How do I capture all files in each account using newly purchased USB external hard drive?  Thanks!

    Backup Software Recommendations
    Carbon Copy Cloner
    Data Backup
    Deja Vu
    SuperDuper!
    Synk Pro
    Tri-Backup
    Others may be found at VersionTracker or MacUpdate.
    Visit The XLab FAQs and read the FAQ on backup and restore.  Also read How to Back Up and Restore Your Files.
    Or you can simply use the Restore option of Disk Utility to clone the drive to the backup:
    Clone using Restore Option of Disk Utility
    Open Disk Utility from the Utilities folder.
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.

  • I have a 3GS iPhone, version 3.1.2.  I have never plugged my phone into a computer or synced with iTunes.  If I do so now, I will I lose everything?  What steps need to be taken to ensure that all of my data, contacts, photos, etc. are not lost?

    I have a 3GS iPhone, version 3.1.2.  I have never plugged my phone into a computer or synced with iTunes.  If I do so now, I will I lose everything?  What steps need to be taken to ensure that all of my data, contacts, photos, etc. are not lost?

    IOS: how to back up  http://support.apple.com/kb/HT1766

  • Data of different session are not getting refreshed.

    We used select one choice and it is bind to the iterator. Data of different session are not getting reflected.
    Problem Scenario : Two browsers are open with same screen . In browser-1, I am adding new item which display on drop down of same screen. But drop down of browser-2 is not displaying the new added value.
    Please let me know how to refresh the data of browser-2 if I added data on different session.
    //JSFF entry
    <af:selectOneChoice binding="#{backingBeanScope.Product.ICTCSTName}"
    id="iCTCSTName" simple="true"
    label="#{bindings.tpCrudeSuperTypeFindAllPopulatedCT.label}"
    required="#{bindings.tpCrudeSuperTypeFindAllPopulatedCT.hints.mandatory}"
    value="#{bindings.tpCrudeSuperTypeFindAllPopulatedCT.inputValue}"
    autoSubmit="true">
    <f:selectItems value="#{bindings.tpCrudeSuperTypeFindAllPopulatedCT.items}"
    binding="#{backingBeanScope.Product.si2}"
    id="si2"/>
    </af:selectOneChoice>
    //Pagedef entry
    <list IterBinding="tpCrudeSuperTypeFindAllPopulatedCTIterator"
    ListOperMode="navigation"
    ListIter="tpCrudeSuperTypeFindAllPopulatedCTIterator"
    id="tpCrudeSuperTypeFindAllPopulatedCT" DTSupportsMRU="true">
    <AttrNames>
    <Item Value="superTypeName"/>
    </AttrNames>
    </list>

    Are you sure backingBeanScope is the correct scope for your scenario?
    Session scope sound more appropriate to me.
    binding="#{backingBeanScope.Product.si2}"

Maybe you are looking for