Re: how do i install a hp psc 1410 all in one printer without the disk?

how to install?

lection wrote:
how to install?
Install what? If it is the PSC 1410 then what operating system? Do you have a 32 bit or 64 bit version? See my post here.
If a different printer model please start a new thread after reading this post and then provide some details. What printer model? What operating system? How is the printer connected - USB, wired LAN, Wireless LAN, bluetooth?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

HP PSC 1410 All in one Printer not installed

In windows 8 after complete and lastest installation of Driver of HP PSC 1410v All in one, in the Control Pannel, Device and Printer Tab only scanner icon is showing no any printer icon and no other HP Icon, so i can use scanner only of this model but not printer. After reading suggestions I install the windows 7 driver in windows 8 after solution of fatel error here is also only scanner is showing no facility for printing, please help me where I am wrong or whats solution fast plzzzzzz.

Hello Jai_pareek,
Welcome to the HP Support Forums! I see you would like to install your HP PSC 1410 to your computer running the Windows 8 Operating system. You tried downloading the Windows 7 driver but are now getting a fatal error. Please go ahead and start with the steps listed below:
1. Unplug the USB if using a direct connection.
2. Remove the HP PSC 1410 software from your computers Control Panel's Uninstall a program option.
3. Restart the computer.
4. Make sure ALL the PSC 1410 software is gone from the programs list as well as your HP folder listed under the All programs in your Start Menu.
5. Now go ahead and download the software and drivers for your PSC 1410 (DO NOT plug in USB until the software prompts you to):
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-110055-2&cc=us&dlc=en&lc=en...
6. Go ahead and print a test page.
7. If you are unable to print a test page, please run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Please let me know if this was successful! I will watch for your reply.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP PSC 1410 All-In-One printer problem!

I have a PSC 1410 for a while now and I reinstalled Windows 7 recently and now the printer's not detected but I can scan documents. What could be the problem? It was working fine before I reinstalled Windows 7 and I've obviously installed the drivers.

Click here for troubleshooting tips for blinking lights on the PSC 1400 series printers.
Regards,
Bob Headrick, Microsoft MVP Printing/Imaging
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Hp psc 1315 all-in-one printer

I have installed a hp psc 1315 all in one printer on my new Mac OS X version 10.9.5.
While I can print without any problems, I don't have access to scan a document from the printer to my computer.
Can anyone help with this?
Thank you.

Hello @annlf
Welcome to the HP Community!
I hope to help you with the scanning concern you have today.
Unfortunately, you will not be able to scan using HP software with your PSC 1315 (older model), on Mavericks (newer OS X), as there is no Full Feature driver (includes scanning software) available.
However, you do have some other options to scan. See this link for your options. Scroll down when the guide loads and select "How do I scan with the driver from Apple Software Update?"
OS X v10.9 Mavericks: Installing and Using the Printer on a Mac
Have a wonderful Wednesday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP PSC 1410 All in One HANG INDEFINITELY with Remote Downlevel Document

Hi, after a few days of setting up my PSC 1410 All In One Printer, which is hooked up to a Compaq Presario V3000 running on Windows XP SP3 with AMD Turion 64x2 processor; and shared print to a Sony Vaio VGN FW33G, and a Mac Pro running on Snow Leopard OS X 10.6
Just yesterday, my printer was jammed with a "Remote Downlevel Document" which I can't remove after using these methods I've researched:
1. "Right Click and Cancel" x [indefinite] times
2. "Right Click and Refresh" x [indefinite] times
3. "Restart" x [indefinite] times
4. "Restart" with printer hooked on/off to the USB x [indefinite] times + [indefinite] combinations of whichever comes first
5. "Unhook USB and Click Start>Run "net stop spooler" and Rehook USB and Click Start>Run "net start spooler" x [indefinite] times
6. Did virus scan for suspicious virus using Anti Vir
7. And in between, combinations of the above x [indefinite] times
8. Search on the internet which obviously there's no real solution
Please help.
Regards,
Bobby

Am (attempting) to print direct from my MacBook - admittedly I did not install any printer drivers during the Leopard (clean) install and am a bit confused as to whether I'm now using the right one, but from what I can gather from the threads like this now littering this forum it wouldn't have made much of a difference. I had infact presumed my problem was just that - that I hadn't the right driver.
Like I hinted at previous; I can reconnect the HP to my old G4 running Tiger and print with no trouble whatsoever.
Trying to print from Leopard brings up the print dialog, and subsequent utility as it should but then nothing - as if the MacBook's not talking with the HP (though it happily recognises it as being there and what model it is etc.).
I have not yet attempted to print over the network, mainly because I couldn't succeed as is. Or tried to scan as it happens (I hardly ever use the built in scanner as I have a better one and the PSC is my backup - I scan a lot in my job).

HP PSC 1410 All In One, have driver problems...............................

I have an HP PSC 1410 All in one printer that I cannot print items from my computer on. When I try to print something from my computer my computer tells me that no driver for the printer is detcted but when I open "MY COMPUTER" and click Devices, it shows the printer listed as operational and that it is functioning properly.

I tried installing the driver and couldn't so I called HP and found out the printer is obsolete and no drivers are available........ they don't support that model anymore , So I'm screwed................

Installing HP PSC 1350 all-in-one printer/scanner

In the past, I could usually solve the "Offline" or "Not Connected" problems by unplugging my printer for a few minutes, but that no longer works. So, I decided to buy another one. However, just before clicking on the BUY button on Amazon, I decided to try to fix the problem one more time. Part of the "fix" was deleting my printer from the computer and then reinstalling it. This is where I'm now stuck. I deleted it, but I can't reinstall it. I get to the ADD window, but everything is grayed out. So, how do I install my printer? I might add that the HP instructions that I was following (OSX v. 10.9 Mavericks- Installing and using the printer on a Mac) are what got me this far.

Have you installed the v10.9 Mavericks compatible driver yet >> Software & driver downloads HP PSC 1350 All-in-One Printer | HP® Support
After you download the driver, open System Preferences > Printer & Scanners > Print
Delete the current printer by selecting it then click - (minus)
Then click + to add the printer back in.
That should load the driver for you.

How do i install HP deskjet 3510 printer without the disk to my laptop

how do i install HP deskjet 3510 printer without the disk to my laptop

Hi,
You can download from the following link:
http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&taskId=135&prodTypeId...
Full Feature Software and Drivers is the one you definitely need first.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Not able to install scanner part of 'HP PSC 1410 all-in-one'[SOLVED]

Despite trying instructions in the wiki, checking earlier reports of this problem on the forum and trying on reports from google, I am not able to install the scanner part of 'HP PSC 1410 all-in-one'. The command 'sane-find-scanner' finds it but 'scanimage -L' does not. Also xsane and simple-scan program do not find it. Any help will be appreciated.
(I also tried these entries in the udev sane rules:
ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="4d11", MODE="0664", GROUP="scanner", ENV{libsane_matched}="yes"
"SUBSYSTEM=="usb_device", ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="4d11", PROGRAM="/bin/sh -c 'K=%k; K=$${K#usbdev}; printf bus/usb/%%03i/%%03i $${K%%%%.*} $${K#*.}'", NAME="%c", MODE="0666", GROUP="scanner", ENV{libsane_matched}="yes"
but they do not work).
Some previous threads:
https://bbs.archlinux.org/viewtopic.php?id=107474
https://bbs.archlinux.org/viewtopic.php?id=65431
Not able to install sane-dev from AUR; 'makepkg -s' gives error:
==> WARNING: Cannot find the git binary required to determine latest git revision.
Last edited by rnarch (2012-03-28 05:05:09)

Git was not installed. So I installed it and ran 'makepkg -s' again. It ended with following error:
installing saned.conf in /etc/sane.d/saned.conf...
installing dll.conf in /etc/sane.d/dll.conf...
for dir in artec_eplus48u gt68xx snapscan epjitsu ; do \
/bin/sh ../mkinstalldirs /home/sane-dev/pkg/usr/share/sane/${dir} ; \
done
mkdir -p -- /home/sane-dev/pkg/usr/share/sane/artec_eplus48u
mkdir -p -- /home/sane-dev/pkg/usr/share/sane/gt68xx
mkdir -p -- /home/sane-dev/pkg/usr/share/sane/snapscan
mkdir -p -- /home/sane-dev/pkg/usr/share/sane/epjitsu
/bin/sh ../mkinstalldirs -m 775 -g uucp /home/sane-dev/pkg/var/lock/sane
Usage: mkinstalldirs [-h] [--help] [--version] [-m MODE] DIR ...
Create each directory DIR (with mode MODE, if specified), including all
leading file name components.
Report bugs to <[email protected]>.
make[4]: *** [install-lockpath] Error 1
make[4]: Leaving directory `/home/sane-dev/src/sane-backends/backend'
make[3]: *** [install-data-am] Error 2
make[3]: Leaving directory `/home/sane-dev/src/sane-backends/backend'
make[2]: *** [install-am] Error 2
make[2]: Leaving directory `/home/sane-dev/src/sane-backends/backend'
make[1]: *** [install] Error 2
make[1]: Leaving directory `/home/sane-dev/src/sane-backends/backend'
make: *** [install-recursive] Error 1
==> ERROR: A failure occurred in build().
Aborting...
Please note the line: Report bugs to <[email protected]>. Is it a bug? Sane-dev was successfully installed by others, eg: https://bbs.archlinux.org/viewtopic.php?id=65431
Last edited by rnarch (2012-03-26 01:11:57)

HP Officejet and PSC Full Feature Software for HP PSC 1210 All in one printer

Hello ,
I have HP PSC 1210 All in one printer but i am using windows 7 system.how can i find
'HP Officejet and PSC Full Feature Software'
compatible for windows 7, in hp.com i sould find the above software for windows xp but for windows xp its not working, my printer physical keys are not working so i need software to do everyything from print to scan, copy etc from my windows 7 laptop itself. pls help with sofware for windows 7

Hi,
There is not a full feature software Win 7 download available for the HP PSC 1210. The following document includes instructions on how to install the in-OS Win 7 driver with instructions on how to scan:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796879&cc=us&dlc=en&lc=en&os=4062&product=907...=
I work for HP.

HP PSC 1210 All-in-One Printer -- need Software (scanner directory), for windows 7 (64) bit

hi,
I am kind of done with this Printer ! lost hope in customer care and support hit with HP ! from Past 10 days searching a software to scan few doc from my printer 1210 (HP PSC 1210 All-in-One Printer) but i dint find.... i got one from some source (166 Mb) file, but to my surprise its not compatable with Windows 7. i am totally depressed now.... Please help me to find software for this (scanner document) I have lost the CD lont time back can i download This some where?

Hi there,
I understand you're looking for drivers for your PSC 1210 on Windows 7. I will certainly do my best to guide you in this issue.
At this time there are no HP drivers available for this printer for Windows 7. You can still use the printer with Windows 7, you will just have to use the drivers available within Windows 7. That document will walk you through what you need to do in order to get printing again, and will also show you how to scan with this Windows driver.
Hope this helps, have a great day!!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

HP Psc 1410 all in one series Printing pink

Printer - HP Psc 1410 all in one series
Operating system - Microsoft windows Vista 32 bit
Ive installed the driver and the software but when i print colour the colour is pink. When I print in black and white it prints fine jsut colour is all pink.
Jamie

Please click here for a possible solution to your problem:
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&product=441115&docname=c00313147
Let me know if that helps.
Please click on KUDOS if you find my solution helpful.

HP PSC 1310 All-in-One Printer

Hi
I need to download the the full set of drivers & software so i can install them on a friends computer who does not have a internet connection yet and will not for a while yet..
the only ones i can see need to connect to the internet to download the drivers..
Printer = HP PSC 1310 All-in-One Printer
Operation system = Windows 8.1 x64
PS: Why do printer companies make it so difficult to download the full set of drivers\software when people have spent good money buying there printers.... i get asked this question a lot but people....
thanks
We all make mistakes said the Dalek climbing off the Dustbin.

Hello,
Full feature driver is available for download for this model. Please select the OS from the drop down list first and then select next to download the driver.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=2093&lc=en&cc=us&dlc=en&sw_lang=&product=3745...
I work for HP but my posts and replies are my own.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

XP software disc does not work on 8.1 HP PSC 2355v All in One Printer

Please excuse my novice actions in the subject description as I put my problem and request there. Basically: My XP software Disc will not work on my Windows 8.1 computer for my HP PSC 2355v All In One Printer. Needless to say I can print with a downloaded driver but can not use the Managerial software on the XP disc. When I try to work from the printer it does not recognize the computer, so is there HP software out there that can be downloaded simply to my computer? If so, Where and How can I get it. Thanks again.

Hi,
Unfortunately no more support after Vista but you can use basic function of the printer using the following instructions:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03168175#N135752
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Does hp support a HP psc 1500 all in one printer

I can not print in black. I've re uninstalled and re installed my printer at least 6 times, can not find my printer which is a HP psc 1500 all in one listed therefore I used software for 1510 all in one. It prints all text in light blue. I've tried changing my printing preferences many different ways. Nothing seems to correct this problem. I've run a test page and it printed two lines in black( black print read HP PSC 1500 series and my serial number on the second line) and 3 color blocks and the rest was small squares and small lines in 3 columns. My frustration level is at an all time high. I've literally spent an entire day trying to fix this problem. Please help before I do something RASH. Thank You, Greta2

Hey @greta2,
Welcome to the HP Support Forum. I understand you're having a print quality issue with your HP PSC 1500 All-in-One Printer. I would like to assist you in resolving this and have some steps that may improve your print quality. You were correct in using the 1510 All-in-One drivers as they are compatible with your printer. Additionally, you were very diligent in approaching the problem from a software perspective - this rules out printer settings as being the most likely cause of the absence of black ink in your printouts.
From what you're describing with the test-page printout, I would recommend that you troubleshoot the issue at the hardware level. For starters, click on the following article heading and work your way through Steps 2 through 6 to better diagnose the issue:
Missing, Faded, or Dull Colors
As I suspect your print diagnostic page (Steps 3-6) will be lacking black ink in some parts as before, proceed with the following steps:
Run the clean print cartridges utility
Open the Printer Toolbox. There are two ways to do this:
Open HP Director (or HP Solution Center), select the Settings menu, then the Print Settings submenu, and finally the Printer Toolbox.
Open Printers and Faxes in the Windows Control Panel, then right-click your printer icon and choose Properties. Click on Printing Preferences. Click the Services tab, then the Service This Device icon.
The Printer Toolbox opens. On the Device Services tab, click Clean the Print Cartridges , then follow the on-screen instructions. Up to three levels of cleaning are available. Discard or recycle the page that prints.
Clean the contacts
Gather the following items to clean the cartridge and carriage:
Clean distilled water. Use bottled or filtered water if distilled water is not available. Tap water can contain contaminants that damage the cartridge.
Clean cotton swabs or any soft, lint-free material that will not stick to the cartridges (coffee filters work well).
Sheets of paper or a paper towel to rest the cartridge on during cleaning.
Open the cartridge access door and wait until the carriage is idle and silent.
Disconnect the power cord from the back of the printer.
Remove the cartridge and place it on a piece of paper with the nozzle plate facing up.
NOTE:Do not leave the cartridges outside of the printer for more than 30 minutes. If the cartridge is outside of the printer for too long, the ink can dry and clog the nozzles.
Dip a clean foam-rubber swab or lint-free cloth into distilled water, and then squeeze any excess water from it.
Clean only the copper-colored contacts
Figure : Clean the contacts
Copper-colored contacts
Ink nozzles (do not clean)
Repeat these steps for the other cartridge.
Lightly moisten another cotton swab with distilled water, and then squeeze any excess water from the swab.
Use the swab to clean the electrical contacts in the carriage, located inside the printer on the carriage slots.
Figure : The electrical contacts in the cartridge slots
Wait 10 minutes to allow the cartridge and carriage electrical contacts to dry.
Reinstall the cartridges.
Close the cartridge access door.
Reconnect the power cord to the back of the printer.
Press the Power button to turn on the printer.
Try to print a page.
If you are still unable to print, repeat these steps to clean and reseat the cartridges. Multiple cleanings might be necessary to restore printing.
Black cartridges only: remove and rest for two hours
NOTE:The procedure below will not fix missing lines or streaked bars printed by the tri-color, photo, or gray photo cartridges, or other color printing problems. Only perform the steps below if the black print cartridge has printed defective patterns, or if you notice non-uniform black text darkness.
In the black print cartridge, this problem may be caused by sediments collecting in the nozzle area. Follow the steps below to solve this problem:
Remove the black print cartridge.
If the carriage has a latch, relatch it and then close the printer - this is important. If the printer is not closed, it cannot adequately protect the remaining tri-color cartridge.
Place the cartridge on a level surface with the nozzles up (label down).
Figure : Cartridge with the nozzles up
Allow the cartridge to sit undisturbed for two hours.
Reinstall the cartridge and print another self test page.
Click the Windows Start button, then click Control Panel.
Double-click the Printer and Faxes folder.
Right-click the icon for your printer and choose Preferences.
Choose the Services tab and click Service this Device. The printer Toolbox opens.
On the Devices Services tab, click Print a Diagnostic Page.
Look for defects on the page.
If the self test page shows no defects for the black cartridge, and if the cartridge was new, align the cartridge. To align the cartridge, follow the steps below:
Load fresh, white paper.
Click the Windows Start button, then click Control Panel.
Double-click the Printer and Faxes folder.
Right-click the icon for your printer and choose Preferences.
Choose the Services tab and click Service this Device. The printer Toolbox opens.
On the Device Services tab, click Align the Printer.
If the cartridge was not new, there is no reason to align the printer.
If the page still shows defects, go to the next step.
Replace the problem cartridge
If a cartridge replacement was not tried previously to solve this problem, replace the problem cartridge now. Click here (c00206040) (in English) to see if the cartridge is covered under warranty.
Source: http://support.hp.com/us-en/product/hp-psc-1510-all-in-one-printer-series/428822/model/428823/docume...
Let me know the result of your troubleshooting by responding to this post. Best of luck!
E-roq
I work on behalf of HP.
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Re: how do i install a hp psc 1410 all in one printer without the disk?

Similar Messages

Maybe you are looking for