Re: How do I leave my email on the email server using iPad 2 .
Re: How do I leave my email on the email server using iPad 2 .
The iPad 2 wipes the messages off the server when downloading...
This option is not in advance settings for other email providers.
You have to actually have another email account with a email provider. Whether that is your ISP or one of the free/paid email providers like Gmail, Yahoo, MS Outlook.
Similar Messages
-
How to attach document in email by using ipad 2?
I would like to attach document in my email. How to do it? Do I need any app to support it?
Thank you.Select the document that you want to attach, photo, note or other and tap on the arrow icon.
You can add to your message once the attachment is sent to "Mail". -
How can I print an email from my ipad via my Lexmark printer?
How can I print my emails from my ipad with my Lexmark printer?. I can print photos & web pages.
Hi there Lindlylou!
I have an article here that can explain a little more about the feature you are referencing, called AirPrint:
AirPrint Basics
http://support.apple.com/kb/HT4356
That article will contain information about which printers are AirPrint compatible, as well as information about how to use AirPrint on your iPad. Thanks for using the Apple Support Communities. Have a good one!
-Braden -
How do I get my email on my iPad to open in adobe reader?
How do I get my email on my iPad to open in adobe reader?
jordans6879,
Please take a look at the following FAQ documents.
For iPad, How to get PDF documents into Adobe Reader for iOS (iPad on iOS 7 version)
For iPhone, How to get PDF documents into Adobe Reader for iOS (iPhone on iOS 7 version)
Please let us know if you have additional questions. -
How can I specify SMTP Email Server userID and password when using Email VIs?
How can I specify SMTP Email Server userID and password when using Email VIs included in Internet Toolkit?
Hi,
A similar question was posted on Discussion Forums soem time back. Please see the link below.
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=506500000008000000C7B00000&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0
You would find the last post in the above thread quite useful where it has a link to OpenG code. I am also copying that link for your reference.
http://www.openg.org/tiki/tiki-index.php?page=OpenG+Internet+Connectivity+Tools
Please feel free to respond to this post with any questions/comments you may have.
Regards,
Ankita A.
National Instruments -
I bought 2nd hand iPhone and was linked with previous owner. I want to contact him but i didn't get any address of him. How can iget his/her email address using that iphone IMEI or you know any idea... Please reply if you know solution .....
There is no solution here and you should already have known this as you replied to a thread all about this a few up from your own post and this stated the postition quite clearly and the question was answered.
Why do you ask the same question again? The first answer is not going to change just because you don't like it!! -
How do I send group emails from an iPad? They work fine on my MacBook but not my iPad.
You need a third party app to do that. Look at Mail Shot or Group Email in the app store. You cannot do it with the built in mail app and the contacts app in iOS 5 without a third party app.
-
How do I transfer saved emails from old ipad to new ipad
how do I transfer saved emails from old ipad to new ipad?
Hi trevorius,
Happy New Year! The answer to your question depends on what email account you are using. If it is your iCloud email account, the email messages will be available when you enable iCloud on your new iPad. If it is an iMap account like Gmail, the messages will be redownloaded from their server.
Transfer content from an iPhone, iPad, or iPod touch to a new device - Apple Support
http://support.apple.com/en-us/HT2109
Transfer content from an iPhone, iPad, or iPod touch to a new device
You can use iCloud or iTunes to transfer content from your current iPhone, iPad, or iPod touch to another device.
Use iCloud Backup
Follow these steps if both your devices use iOS 5 or later and you have an iCloud account. If not, please follow the iTunes steps below.
You can use iCloud Backup to back up your previous device and then restore the backup to a new device. Your saved messages, email accounts, photos, notes, and other personal settings will be transferred to your new device.
See more about iCloud Backup.
Turn on iCloud Backup
Start by backing up your old device to iCloud:
Go to Settings > iCloud > Storage & Backup.
Turn on iCloud Backup.
You may want to connect to power and turn Wi-Fi on.
Back up now
iCloud backs up your device once a day. To back up your device before you transfer content:
Go to Settings > iCloud > Storage & Backup.
Tap Back Up Now.
Wait until the backup finishes. How long it will take depends on how big the backup is and how fast your Internet connection is.
Set up your new device
When the backup of your old device is finished, turn on your new device. Follow the setup assistant, which will ask you to choose these things:
Your language and country
Whether to enable Location Services
A Wi-Fi network
If you've already set up your device, you can reset it so that you can go through the iOS Setup Assistant again and restore from your backup. Tap Settings > General > Reset > Erase All Content and Settings. Do this only if you already have a backup.
Restore from iCloud Backup
When you're asked to set up:
Choose Restore from iCloud Backup.
Tap next.
Enter your Apple ID and password.
Choose the backup
Choose the backup of your old device and tap Restore. Wait until the device finishes restoring from the backup.
How long it will take depends on how big the backup is and how fast your Internet connection is.
Sync other content from iTunes
When the restore finishes, your device will restart. You should connect the device to iTunes to sync data that isn't in the backup (such as music, videos, or apps that you didn't purchase from the iTunes Store or the App Store ). To change the type of content that syncs, click the syncing tabs in iTunes.
Enter your passwords
When you're restoring an iCloud backup to a new device, you'll need to enter your password for your Apple ID, email and other accounts, and voicemail. If you've forgotten your voicemail password, contact your carrier.
Learn more
Learn more about iOS backups
See what to do before you sell or give away your iOS device
Learn how to set up your old iPhone to be like an iPod touch (without a carrier plan)
Use iTunes
If you don't have an iCloud account or you just want to keep a backup on your computer, you can use iTunes to back up and transfer content on your device.
Get ready
Install the latest version of iTunes on your computer and the latest version of iOS on your original device.
You can't install a backup of a newer version of iOS onto devices that are using earlier versions of iOS. If your backup came from a device that has a newer version of iOS installed, update your new device before you transfer your data. For help, see Unable to restore from a backup of a newer iOS device.
Back up and transfer
First, back up your old device using iTunes. You can also encrypt the backup so that it remembers the passwords for your email, Wi-Fi, and more when you transfer to the new device. Otherwise, you can re-enter these passwords on the new device.
Then transfer your data from your device to your computer.
Remove your SIM card
If your device has a SIM card, use the SIM-extractor tool or a paper clip to remove the SIM from your old device and insert it into your new device. Or if your carrier gave you a new SIM card, use that instead.
Set up the new device
When the backup of your old device is finished, turn on your new device. Follow the setup assistant, which will ask you to choose these things:
Your language and country
Whether to enable Location Services
A Wi-Fi network
If you don’t have a Wi-Fi or cellular data connection, you can also activate by tapping Connect to iTunes.
Restore the backup
When prompted to set up your device, select Restore from iTunes Backup.
Connect to iTunes
Connect your new device to iTunes, using the same computer you used to back up your current device. iTunes will ask you to restore from backup or set up as new. Select the backup of your old device and choose Continue.
If the progress bar in iTunes pauses for a while, wait until the restore finishes.
Sync other content
When the restore finishes, your device restarts, and then it's ready for you to use.
Keep your device connected to iTunes to sync content that isn't in the backup (such as music, videos, and apps). To change the type of content that syncs, click the syncing tabs in iTunes.
Enter your passwords
If you restored from an unencrypted backup, you'll need to enter the password for your Apple ID, email and other accounts, and voicemail. If you've forgotten your voicemail password, contact your carrier.
Learn more
Learn more about iOS backups
See what to do before you sell or give away your iOS device
Learn how to set up your old iPhone to be like an iPod touch (without a carrier plan)
Last Modified: Oct 31, 2014
I hope this information helps ....
- Judy -
How do you leave your iMac when you're not using it?
Just curious..
Hey All..
I have a 24" iMac 2.8 with a 750GB Hard Drive. I tend to leave it on all the time shutting it down over night probably once a week. I have my settings to turn the display off after 5 minutes and turn off the hard disks "when possible". I just wondered if this was healthy or will it shorten the life expectancy of my pride and joy? I must admit that I do like to leave it on all the time. I leave my Time Capsule on all the time too...should I perhaps shut this down also?
I have the Applecare program which gives me some piece of mind with my iMac.
I'd be delighted and interested to hear how you all 'leave' your iMacs when you're not using them.
Kind regards..
~RICKYI have my system plugged into a UPS and generally leave it sleeping. There's a window where I have it scheduled to wake up and then sleep again, but it I otherwise sleep it.
I suspect that sleep probably puts the least wear on your machine and is safe if you have a UPS. FWIW, an early 2007 24" iMac draws 3W of power when it's off, and 10W or so when asleep ( the newer models use less than 6W). During the boot process, power consumption will go 200-220W for ~1 minute. Normal usage it consumes about 100W. Idling, the machine will use between 70-100W depending on the screen brightness, and about 45W if the display is off and machine is idle. Playing something like WoW brings the power consumption up over the 200W mark.
The mechanical parts wear proportional to the number of times they are used (physical switches), and the electronic parts wear mostly based on the the result of cycles of temperature changes / surges of voltage. Pressing the power-button to power-on the Mac probably puts the most wear on the unit as a whole. That said, under normal circumstances you are not likely to put enough wear on anything but the hard disk to have it fail. -
How do i add an event to the calendar of my ipad?
Just purchased a new IPAD, 1st time user. How do i add an event to the calendar of my ipad? i do not have a "+" symbol.
Go to Settings>iCloud>Calendar>On then Off. Toggle the on/off setting. If you want to use iCloud with the calendar, leave it set to on.
-
How do I find, at-a-glance, the sample size used in several music files?
How do I find, at-a-glance, the sample size used in several music files?
Of all the fields available in a FInder Search, "Sample Size" is not available. Finder does offer a "Bits per Sample" field, but it only recognized graphic files and not music files.
Running 10.8.5 on an iMac i5.
I did search through a couple of communities but came up empty.
Thank you,
CraigC-squared,
There is no View Option to allow display of a column of sample size.
For WAV or Apple Lossless files, it is available on the Summary tab (one song at a time, as you know). For MP3 and AAC it is not available at all.
You can roughly infer it from the files that are larger than expected for their time.
99% of the music we use is at the CD standard of 16-bit, so I can guess that displaying it has never been a priority. However, if you want to make a suggestion to Apple, use this link:
http://www.apple.com/feedback/itunesapp.html -
Does anyone know how to do a text search in the new Safari for iPad iOS 7?
Does anyone know how to do a text search in the new Safari for iPad iOS 7?
The feature has been removed to make safari even less useable. You need to download a third party browser like atomic web browser to get the functionality you want back.
Like many new IOS 7 "features", safari on the ipad is a FAIL.
At least you can now bury safari in a folder containing hundreds of icons that you can only view 9 at a time. -
How to create a virtual directory for the Report Server
Hi, I am new to server admin and need help with configuration.
I would like to map a physical directory on the server so that users can use a virtual path to save report outputs in that location. For example the form will call the report with desname = 'd:\xyz\abc.pdf' and the output file will be saved in a predefined directory on the server. I know how to do it on the forms server using the orion_web.xml but not sure about the report server configuration.
We are using rwservlet to run reports on 10G release2/Windows 2000.
Thanks in advance,Virtual directories are mapped in the httpd.conf file in the Apache directory as aliases:
Alias /xyz/ "d:\xyz\"
You can now call the report output with
http://server/xyz/abc.pdf -
How to delete a local file in the presentation server.
Hi All,
How to delete a local file in the presentation server. As we do using 'delete dataset dsn' in application server. How can i achieve this. My requirement is after uploading file using gui_upload, i want to delete that source file. Please let me know, how can i achieve this.
Thanks in advance.
Regards,
Vishaldata: l_rc type i.
data: f_name type string.
move 'c:\YourFile.txt' to f_name.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_DELETE
EXPORTING
FILENAME = f_name
CHANGING
RC = l_rc
EXCEPTIONS
FILE_DELETE_FAILED = 1
CNTL_ERROR = 2
ERROR_NO_GUI = 3
FILE_NOT_FOUND = 4
ACCESS_DENIED = 5
UNKNOWN_ERROR = 6
NOT_SUPPORTED_BY_GUI = 7
WRONG_PARAMETER = 8
others = 9
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. -
How to find out which type of the driver is used in our application?
Hi all,
can anyone tell me how to find out which type of the driver is used in our application?
Thanks in advance,
PhoenioxHi,
Check out this...
Class.forName("com.mysql.jdbc.Driver"); //if u r using MySql
List drivers = Collections.list(DriverManager.getDrivers());
for(int i=0;i<drivers.size();i++)
Driver driver = (Driver)drivers.get(i);
String driverName = driver.getClass().getName();
System.out.println("Driver "+i+":::"+driverName);
you need to load the driver and display in the same program.
Then only you'l get the required result.
prakhyath
Maybe you are looking for
-
Ajuda com Product/Software Component/Business System
Pessoal Preciso de uma ajuda de vcs, estou com um ambiente que o BASIS instalou tudo mas o Produto/Software Component SAP NFe 1.0 não está aparecendo no SLD portanto nao consigo fazer a amarracao com o Business System ( que foi criado ). Vcs sabem me
-
I've tried using multiple cords to connect to a computer, I've tried multiple computers, I've tried resetting all my settings on my IPhone, I've reinstalled and redownloaded itunes, and I've completely updated my iPhone and iTunes. Nothing works. I'm
-
Max Degree of Parallelism, Timeouts and Deadlocks
We have been trying to track down some timeout issues with our SQL Server. Our SQL Server runs a AccPac Account System, an Internal Intranet site and some SharePoint Content DBs. We know that some of the queries are complex and take some time, thou
-
HT201441 How can i change the e-mail and password for the iphone
Hi there, I bought my iphone as a 2nd hand from someone i dont know his adress.Then i made an update to the iphone and its says that i have to write the previous e-mail and the password which i dont know any of them and i couldnt find that person now
-
What does 'Filter' Failed mean
I did a forum search and did not find anything on point. I just pulled a Konica Minolta Magicolor 2400w printer out of storage. It has not been used in close to 6 years. Plugged into my MBP running Mountain Lion, and it could see the printer but did