Re: How to Assign Alternate Print Drivers in Different Versions of Windows.

For Windows 7, there is no "Advanced Tab" in the "Properties" box. I have searched now - for almost 2-hours - trying to find out how to install a new / different driver for the HP Officejet 4620.

You have to select "Printer Properties" not "Properties" by itself.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Similar Messages

  • How do I uninstall printer drivers on my MacBook Pro?

    How do I uninstall printer drivers on my MacBook Pro?

    Remove the undesired driver from Macintosh HD > Library > Printers

  • I want to connect to a network printer hp cp1518ni with different versions of windows (win7& winxp)

    I want to connect to a network printer hp cp1518ni with different versions of windows (win7 & winxp) . My pc with win 7 work ok but the pc with win xp not "see" the printer on the network. What is the additional driver should I install?
    thanks
    This question was solved.
    View Solution.

    Hi @OHIMATAS,
    I see by your post that you are unable to network the printer to the Windows XP computer, but the Windows 7 computer is connected. I can help you with this.
    Make sure the Windows XP computer is connected to the correct network name, not a Guest network either.
    Print a configuration page to get the printer's IP address.
    Printing a Configuration Page.
    Try and access the printer's Embedded Web Server on the Windows XP computer.
    Type the IP address into your web browser's address bar. (Internet Explorer)
    Did it load the webpage?
    If you can't access the printer's EWS, then check the IP address on the computer to see if the first 3 sets of numbers match the printer's IP. They have to match to be on the same network.
    Go to start, type run in the search box, type in cmd, then type ipconfig.
    Check the IPV4 address.
    Now check the IPV4 address for the printer.
    Do the first 3 sets of numbers match?
    Try and ping the printer.
    In the same window, type ping printers IP address (space between ping and IP address)
    What are the results?
    Run the add printer wizard through printers and faxes, if you were able to access the printer's EWS.
    Please provide in detail the results if you are still having issues.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • How do i convert my Photoshop CS 4 version from Windows to Mac

    How do i convert my Photoshop CS 4 version from Windows to Mac.

    You are not likely to be able to convert your CS4 license/version from Windows to Mac.  Platform conversions are only supported for current releases, which would be CS6.  Creative Cloud subscriptions allow for either or both platforms to be supported.

  • How to ID specific printer drivers installed with system?

    Good evening.
    How can I find out what specific printer drivers are installed with my current OS 10.4.11 software?
    It has been updated by the "software update" route since original install by Apple at factory.
    I would like to use my old but bulletproof Epson Color Stylus 600 printer. The Apple support site says that support should be there.
    Thanks for your time.

    Just add the printer. If you did not install printer drivers you can do so from the Optional Installer on the Tiger DVD.

  • How do I uninstall print drivers that do not work?

    I've downloaded the HP drivers for 10.6 from here
    http://support.apple.com/downloads/HPPrinter_Drivers_for_Mac_OS_X_v106
    However, I am still unable to get my HP PSC 1400 to print via the Time Capsule. Since the driver package ended up being +500 MB, is there any way that I can uninstall these drivers to regain that space?

    So the printer drivers for the PSC1400 series unfortunately did not make it onto the DVD. They will be available through a software update at some point in the future. You should able to install the 10.5 solution to get basic functionality working again. As for deleting the files, yes there is a way, but it still leaves some of the files laying around so software update won't work.
    If you want the space though, most of the files are in /Library/Printers/hp. That being said the software update to provide printing support will probably put most of them back.
    Just trying to help.
    Andrew

  • How to: Uninstall HP Printer Drivers in Windows 8

    Need help uninstalling you HP printer drivers? Running Windows 8? Check out the video below for help!
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution
    This question was solved.
    View Solution.

    I have a Toshiba; running Windows 8:
    My laptop wasn't recognizing my HP Photosmart C309g Scanner for some reason. Although I could print, I need the scanner, so I decided to uninstall/reinstall everything. 
    Perhaps I uninstalled the wrong feature first, but whatever happened, my laptop had a hiccup & windows wouldn't load.  I used the onboard problem solving feature and windows did reload. 
    I returned to my efforts to reinstall the printer drivers (using the CD), but when the Setup window appears,  the Install option doesn't appear.  I only have the option to Exit the software setup window. 
    Does this mean there are still remnants of the previous installation?  In the Programs and Features list, there are remants (HP Cust Part Program; HP Imaging Device Functions; and HP Solution Ctr, all of which were installed at the same time as the printer driver.   Nothing happens when I right click to uninstall or double click on it to uninstall. 
    Any suggestions?  Thank you!

  • How to connect a printer to Airport in WIFI with Windows

    Hi,
    I just would like to know how to connect my printer (Samsung) to my Airport network through WIFI (My computer is working with Windows).
    Thanks

    Well the easiest would be to plug your printer directly into your extreme using either the USB or Ethernet connection.
    Make sure you then install bonjour and use the printer wizard to convert your printer...
    Bonjour Print Services for Windows v2.0.2
    http://support.apple.com/kb/DL999

  • How to assign the same GTIN for different material?

    Hi,
    I've managed to install an internal number assignment for the GTIN / EAN in material master which works fine.
    Now we need to assign the same GTIN to different material numbers. 
    Since the defined number range is marked as internal I cannot use this number range as the external number range in spro -> Define Attributes of EANs/UPCs (number categories/EAN categories):
    I cannot make an external number range with the same data as the internal one, since number ranges must not overlap.
    So, here is the question again:
    How can I achieve that 1. the GTIN is generated and 2. a GTIN, which is already assigned to another material, can be entered manually in the GTIN field?
    Any advice is appreciated,
    thanks,
    Marco.

    1. the GTIN is generated
    This should be "external" number range only.
    2. a GTIN, which is already assigned to another material, can be entered manually in the GTIN field?
    We can enter manually or thru' upload during master data creation provided number range is "external"(refer point no.1 above)
    Unable to understand that why you need same GTIN in two different articles?
    Request to understand the business process once again as this leads to confusion reg. inventory, PDC and PoS dumping.

  • How to set up printing from my mac to a windows shared printer.

    I'm trying to print to an HP PSC 1610 All in One printer. Everything is good in the set up while adding a new printer on the mac. The windows workgroup shows up as does the printer. My problem is that the particular model does not show up in the drop down list of HP printers. How can I add it to that list, or basically, how can I get it to work?
    Thanks for your help.

    So here's how you might be able to do this.  I am not 100% if it will work or not, but in theory it sounds promising.  HP has printers which support AirPlay and another feature they call ePrint.  AirPlay is Apple's standard for allowing you to print from the iPad to an AirPlay-compatible printer.  But it requires that both the iPad and printer are on the same WiFi network.  You can use the tethering feature of the iPad (it costs extra from AT&T or Verizon so check into that) to create a WiFi hotspot.  I assume this would allow you to connect the printer to the hotspot and then use AirPlay to print to it, although I am not certain if the printer is able to connect to a hotspot via the tethering feature.  Or you can use the ePrint feature of the printer in which you "email" your document to the printer and it prints it.  Again, it would require that the printer be connected (tethered) to a WiFi hotspot first.  You'd also need a way to plug the printer into your truck - I know some newer vehicles actually provide a standard 110V recipticle vs. the cigarette lighter style.

  • V4 Print Drivers suddenly stopped working on Windows 8.1 machine on a Windows 2012 r2 Domain

    Today one of our newly setup windows 8.1 machines stop printing to a Toshiba copier that was setup on a domain controller with the printers role installed.  The Toshiba copier was setup using Microsoft default Toshiba PLC6 V4 printer driver. 
    The computer in question was printing to the copier minutes before the user shutdown to go to lunch.  When the user returned, printing to the Toshiba copier was not working.  However others in the office where printing to the Toshiba copier
    just fine.  I decide to try and print to other printers and found that the Microsoft XPS printer was not working also.  I also found that all the other printers that where not using V4 printer drives printed just fine.  The Toshiba copier and
    Microsoft XPS printer both use V4 printer drivers.  I tried removing the Toshiba copier, but when re-adding the Toshiba copier a error message was given stating that the V4 driver could not be found.  This same process was tested
    on a known working computer and the printer was removed and added just find.  Next I logged onto the system as the administrator and found that the XPS printer was also not working under the admin account.  So I did not think this was a user
    only related issue and was a system wide issue.  So far my only idea is that something is missed up with the V4 driver system, but I have no idea where to start to go about fixing it.  Any ideas will be helpfully.
    Thanks,

    Hi Harley,
    If you can still reproduce this issue, can you please open a case with Microsoft Support? This isn't a behavior we're aware of, so it'd be great to figure out what's going on.
    Thanks!
    Justin

  • How to install all the drivers for the MacBook with Windows 7 or 8 without the disk from OSX Lion? Where can I find the drivers?

    Guys, a have one big problem..My customer brought me a macbook with windows 7 installed to do a format and reinstallation, but she is no longer the OSX Lion, and do not know how to install the sound drivers, "touchpad", among other drivers, how to solve this? Where can I find the drivers? The MacBook is now with Windows 8 installed.

    Sorry my bad english..
    See is meant. The MacBook has already come for me with Windows 7 installed, checked that it does not have another partition with OSX Lion installed, do not know how the person who did the maintenance before I managed to remove the partition with the Lion, so I can not create a disk or access boot camp because there is no partition Lion and don't own the DVDs of OSX Lion, you understand me?
    There is a boot camp Windows executable? Where do I find, since I poked around and found nothing on ...
    The sound driver is installed, but not working ... and the rest are missing there also, the trackpad also does not work correctly, the right button does not work ... My experience with mac is low, it may be that you do not know how it works correctly the trackpad

  • How do i clean print heads for 990 c on windows 7

    How do i clean print heads for DekJet 990 cxi on windows 7

    Hey @remo1957 ,
    Thanks a lot for the question, now lets get you an answer!
    I see you are looking for instructions for how to clean your printers printheads. Unfortunately you are unable to use an automated tool to clean your printheads.
    I have linked a document that goes through how to clean and maintain your printer.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=bpd06920&tmp_task=useCategory&cc=us&dlc=en&lc=en...
    Best of luck and I hope this get you what you are looking for!
    I worked for HP.

  • How to clean from print driver hp B209a-M on windows 8

    How do I clean my print heads from the print driver hp B209a-M on windows 8

    Hi rcstipe,
    Welcome to the HP forums!
    I see you have a Photosmart B209a and are wanting to know how to clean the printhead via the software on Windows 8. I will definitely do my best to assist you with this.
    There is full feature software for your printer for Windows 8, so as you would have with the few previous versions of Windows, it's done through the HP Solution Center. If you don't have the HP software installed yet, please download and run the HP Printer Install Wizard to get the software installed.
    If you're not sure where to locate the clean printhead function once the software is installed, please have a look at Step four: Clean the printhead under Solution six: Print and evaluate a print quality diagnostic report and troubleshoot defects in this Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems document to see where to locate it.
    Hope to hear back from you soon!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • How would you setup users to have different versions of Flash Player?

    I am looking to test some setups with different versions of Flash, but wanted to know how to setup one user to have Flash Player Version 6, one with version 7, 8, etc.
    How would I go about doing this?
    Thanks,
    Russ

    Create a new folder named Internet Plug-Ins inside the Library folder of the home folder of some of your user accounts, and move the different versions of the plugin into this folder, one per user account. The copy of the Flash plugin in the main Library folder is accessed when an account doesn't have a copy in its home folder.
    (13732)

Maybe you are looking for