RE: How to Change UNA segment in EDIFACT

Hi All,
I need to change
from UNA:+.?*' to UNA:+,? '
Can any one help on this?
Thanks

Please adjust the delimiters in delimiters tab of Document Version, as per your requirement. Please refer section "8.2 Using the EDI EDIFACT Document Protocol" at -
http://docs.oracle.com/cd/E23943_01/user.1111/e10229/b2b_documents.htm#CHDEAIFB
Regards,
Anuj

Similar Messages

  • How to change manual segment management to automatic? and vice versa

    how to change manual segment management to automatic? and vice versa
    i can't find any option for that in EM
    Thanks

    Paolo Marin,
    The original wants to change from Freelist management to Automatic Segment Space management - the URL you supplied is about converting from Dictionary Managed tablespaces (DMT) to Locally Managed tablespaces (LMT).
    In passing - the article you reference says: First, MAKE sure to take a full backup of the tablespace and all related tablespaces (inter-tablespace referential integrity) before running this procedure:. There's no such thing as 'tablespace referential integrity', but (a) it would be a good idea to make sure that no-one else is using the database whilst you do a conversion, and (b) it's the system tablespace that holds the data dictionary so that's the one other (really important) tablespace you have to back up before starting.
    There is a very old note about the limitations of doing the DMT -> LMT conversion here: http://www.jlcomp.demon.co.uk/book_8i/ch_08.html#Extent%20Management
    Regards
    Jonathan Lewis
    http://jonathanlewis.wordpress.com
    https://www.jlcomp.demon.co.uk

  • How to change Field SEGMENT in Profit Centre Master

    Dear Experts,
    We have wrongly created a profit centre with wrong segment in the master and we have done some transactions with the same profit centre. Now we want to correct the SEGMENT field . But the field is greyed out when using KSE2 t code.
    Please advise how can we change the segment field.
    Regards,
    Alok

    Hi
    Please go through the below mentioned links
    Modify segment in Profit Center
    Segment in document posting
    Hope it may help you to solve your problem
    Regards
    Praveen P C

  • RE: How to change Idoc segment data

    Hi folks,
    I have a requirement where in I have a Inbound DELIN Idoc in the SAP system. When I am reprocessing the same Idoc through WE19 by changing the delivery schedule and then changing the E1EDP16-WMENG value in runtime while debugging, the same is getting updated in correponding SDSA but when the new Idoc is getting triggered, only previous old Idoc value is getting reflected.
    Kindly suggest!!!!
    Vishal.

    No I dont want to change the value in WE19.... In runtime I am changing the value of schedule Line quantity and the same is getting update in SDSA also but when a new idoc is getting created that value is not getting reflected in that Idoc segment field.
    Kindly suggest.

  • How to change the IDOC segment data

    How to change the segment data for all IDOCs at one shot J.
    For exmple E1EDK02-QUALF - 004
                       E1EDK02-RGID  -  100000008 (Inquiry No)
                   to
           E1EDK02-QUALF - 004
                       E1EDK02-RGID  -  200000005 (Quotation)
    Any hints, tips….Appreciate your help and more rewards.
    Regards,
    Cris

    Hi,
    You can change the IDOC values using the transaction WE09
    Give the IDOC number..
    Press F8..
    Expand the tree..
    Double click on the segment..
    Then in the menu..DATA RECORD -> DISPLAY/CHANGE..
    It will go in change mode..Change the IDOC value..
    Thanks,
    Naren

  • How to change segment space management (to manual)

    How do I change the segment space management for a tablespace, from auto to manual
    I can find documentation, to create tablespaces, and set them to auto, but nothing yet to change them from auto to manual.

    I just found out, that I am confusing 2 subjects here: segment space management, and auto extensibility. My apologies ....... still new with Oracle :-o
    Ok, to change autoextend to manual, do I do this on data_file level ? Do I only need to change this on the last datafile of a tablespace ?

  • How to change a timezone for job

    Windows Server 2008 64 bits - Oracle 11g (11.02.0).
    In Oracle Enterprise Manager, in Space summary, there are some Segment Advisor Recomendations.
    When I try to use the option Shrink for some of them, I have errors ORA-01878 and ORA-06512.
    I discovered that the problem happens because the time zone in the screen for schedulling this shrink is not correct. Even if I use the option "immediately", I have the same errors.
    So everytime I want to schedule a shrink, I have to change the time zone in this screen...
    Does anybody know how to change this time zone for these particular tasks (shrink) permanentely ?
    And what does this change affect the rest of the system ? I don't think that the database works under this time zone...
    Thanks in advance,
    Eduardo

    Hello Ramya,
    Did you check in [SCN|How to color a row of  alv grid]
    Thanks!

  • How to change parsing schema for REST

    Hi all,
    I'm trying to test the new REST Webservice feature, but this leads to an error:
    Using Apex 4.2.1.00.08, Listener 2.0.1.64.14.25 I set up a simple WebService (method: GET, format: JSON) which
    querys a table.
    When I try to test my webservice (using "Test" button) the following error is shown:
    Request Path passes syntax validation
    Mapping request to database pool: PoolMap [_poolName=apex, _regex=null, _workspaceIdentifier=null, _failed=false, _lastUpdate=-1, _template=null, _type=REGEX]
    Applied database connection info
    Attempting to process with PL/SQL Gateway
    Not processed as PL/SQL Gateway request
    Attempting to process as a RESTful Service
    Determining if request can be dispatched as a Tenanted RESTful Service
    Request path has one path segment, continuing processing
    No Tenant Principal established yet, continuing processing
    APEX_LISTENER pool exists, continuing processing
    Matching tenant exists, continuing processing
    modul/template/ matches: modul/template/ score: 0
    Choosing: oracle.dbtools.rt.resource.templates.jdbc.JDBCResourceTemplateDispatcher as current candidate with score: Score [handle=JDBCURITemplate [scopeId=null, templateId=1019223475312614|5204902308237886, uriTemplate=modul/template/], score=0, scope=SecurityConfig [constraint=none, realm=NONE, logonConfig=LogonConfig [logonForm=null, logonFailed=null]], originsAllowed=[], corsEnabled=true]
    Determining if request can be dispatched as a Tenanted RESTful Service
    Request path has one path segment, continuing processing
    Tenant Principal already established, cannot dispatch
    Chose oracle.dbtools.rt.resource.templates.jdbc.JDBCResourceTemplateDispatcher as the final candidate with score: Score [handle=JDBCURITemplate [scopeId=null, templateId=1019223475312614|5204902308237886, uriTemplate=modul/template/], score=0, scope=SecurityConfig [constraint=none, realm=NONE, logonConfig=LogonConfig [logonForm=null, logonFailed=null]], originsAllowed=[], corsEnabled=true] for: GET modul/template/
    Choosing: oracle.dbtools.rt.jdbc.entity.JDBCTenantDispatcher as current candidate with score: Score [handle=oracle.dbtools.rt.jdbc.entity.JDBCTenantDispatcher$TenantTarget@1537060, score=1, scope=SecurityConfig [constraint=none, realm=NONE, logonConfig=LogonConfig [logonForm=null, logonFailed=null]], originsAllowed=[], corsEnabled=true]
    Chose oracle.dbtools.rt.jdbc.entity.JDBCTenantDispatcher as the final candidate with score: Score [handle=oracle.dbtools.rt.jdbc.entity.JDBCTenantDispatcher$TenantTarget@1537060, score=1, scope=SecurityConfig [constraint=none, realm=NONE, logonConfig=LogonConfig [logonForm=null, logonFailed=null]], originsAllowed=[], corsEnabled=true] for: GET prx/modul/template/
    prx/modul/template/ is a public resource
    modul/template/ is a public resource
    Using generator: oracle.dbtools.rt.json.query.JSONQueryGenerator
    Performing JDBC request as: POFFICE
    Error during evaluation of resource template: ORA-00942: Tabelle oder View nicht vorhanden
    I see what is going wrong: "Performing JDBC request as: POFFICE". JDBC is using a wrong schema ("POFFICE").
    So, my question is, how to change the parsing schema for JDBC/WebService?
    Thanks a lot,
    Michael

    jfle wrote:
    Yes - this is the reason,
    but is there a way to change or delete the first schema provisioned?See {message:id=3757162}
    We have deleted the poffice assignment to the workspace, but the REST-service executes with poffice?Don't know could be a bug.
    May be try exporting you restful webservice definition > Edit the export file in textpad/notepad and verify the parsing schema
    You will see a block something like below, there just amend the p_parsing_schema to desired > and then import it back
    wwv_flow_api.create_restful_module (
      p_id => 7113266627142076447 + wwv_flow_api.g_id_offset
    ,p_name => 'oracle.example.vikram2'
    ,p_parsing_schema => 'APX'
    ,p_items_per_page => 25
    ,p_status => 'PUBLISHED'
      );

  • How to change country and keeping all application upgraded ? thx

    how to change country and keeping all application upgraded ? thx

    you may change the userID/ passwd from menu or create conn segment for each of the userID/ passwd combination .

  • UNA Segment Issue in DMEE Tree

    Hi ,  I am creating custom DMEE trees in tcode DMEE . The issue that i have is with the segment UNA.
    The output format they want is UNA:+.? '
    but i dont know how to get this in the output file ,  i mean i am not sure how to create the element for this UNA segment to reflect the value :+.? '      ? If you could help me in creating this segment that would be great!
    Thanks.

    Any help in this would be greatly appreciated!! ..Its very critical ...

  • How to change type of Element in standard guideline

    Hi,
    I need to change Postal code element in N4 segment from ID to AN to be able to receive characters in the zip code, but when I open the ecs using B2B Document Editor, the Type field is disabled.
    Anyone knows how to change this?
    Thanks in advance
    Venkat

    Hi Venkat,
    Go to the dictionary tab and change the type from ID to AN
    Regards,
    Anuj

  • How to change specified hierachy node to master data attribute automatic?

    Dear BW experts:
             How to change specified hierachy node to master data attribute automatically? I have a retail business: I have a fixed material group hierachy in R3 Retail ,Now I will extract the material group hierachy ,my goal is that the specified material group hierachy node as dimension in query ,not show hierachy level,So I need change specified material group hierachy node to material group's attribute.
    Anybody solve the requests?
            Thank you for your help in advance !

    If I understand your requirement correctly, you need to have a specific Material Group Hierarchy level (Say Level 2) to be an attribute of Material Group. Usually, this level represents a Brand or Segment, or something with specific meaning.
    If this is correct, here are the things you need to do:
    1) Create an InfoOnject for this specific attribute representing the specified hierarchy level
    2) Add this InfoObject to Material Group as an navigational attribute
    3) Select this navigational attribute in your InfoProvider
    4) Create a transformation routine for this navigational attribute in Material Group Transformation so that the specified hierarchy level for Material Group will be found and populated. The detail of this routine will depend on your specific requirement. Also, you have to make sure Material Group Hierarchy is updated before Material Group attributes are loaded. If you are not family with ABAP, please ask an ABAPer to help you for the Transformation Routine.
    5) Include this navigational attribute in your query along with other required InfoObjects.
    Hope this help and good luck!
    Bill

  • How to assign idoc segment at runtime ??

    Hi ,
    I have a ztable which is maintained via sm30.
    The field1 is a key field and other fields are idocsegment name , idoc field , field value .
    Field1 = key field
    idoc segment name (field2)
    idoc field (field3)
    field value(field4)
    How do i update idoc segment and particular field with field4 at runtime .
    segment name , field and value changes with the matching key field.
      loop at it_edidd into wa_edidd
       where segnam = wa_ztable-idoc_segment.
    wa_seg = wa_edidd-sdata.
    how to assign the field at runtime ?????????????????????????
    how to change the value of field ?????????????????????????
       update edid4 set   sdata =  wa_seg
                          where docnum  = wa_edidd-docnum
                          and   segnum  = wa_edidd-segnum
                          and   segnam = wa_edidd-segnam.
       if sy-subrc <> 0 .
         rollback work .
         write: / wa_edidd-docnum .
       else.
         commit work.
       endif.
      endloop.
    Please help me with the above code .
    Regards,
    Rachel

    Hello Rachel
    You could do this the following way:
    DATA: ls_edidd    TYPE edidd,
               ld_idx         TYPE i.
    FIELD-SYMBOLS:
      <ls_segment>         TYPE any,
      <ld_field>                TYPE any.
    LOOP AT it_edidd INTO ls_eddid
                                 WHERE ( segnam = wa_ztable-idoc_segment ).
      ld_idx = syst-tabix.
      ASSIGN ls_edidd-sdata TO <ls_segment> CASTING TYPE (ls_edidd-segnam).  " <<<
      ASSIGN COMPONENT wa_ztable-field3 OF STRUCTURE <ls_segment>
                                      TO <ld_field>.
      <ld_field> = wa_ztable-field4.
      MODIFY it_edidd FROM ls_edidd INDEX ld_idx.
    ENDLOOP.
    However, be aware that your logic might fail in case of repetitive segments.
    Regards
      Uwe

  • How to chang the idoc  message type

    Hi,
    I want to change the idoc message type...because the idoc has the status 51...pls advice how to change
    I have tried it from we81 .......but i cant open the msg type ...when i double click on it.
    Regards,
    Somenath

    Hi,
    This may help u
    Steps To Create Custom IDOC
    1.Create Segment Type (WE31)
    Go to Transaction code WE31
    Enter Segment type, click on Create
    Give Description
    Enter the Necessary Fields & Data Elements for those Fields.
    Save the Changes.
    2.Create Idoc Type (WE30)
    Go to transaction code WE30
    Enter the Object Name, select Basic type and click Create icon
    Select the create new option and enter a description for your basic IDOC type and press enter
    Select the IDOC Name and click Create icon
    The system prompts us to enter a segment type and its attributes
    Choose the appropriate values and press Enter
    The system transfers the name of the segment type to the IDOC editor.
    Follow these steps to add more number of segments to Parent or as Parent-child relation
    Save it and go back
    Go to Edit -> Set release
    3.Create Message Type (WE81)
    Go to transaction code WE81
    Change the details from Display mode to Change modenAfter selection, the system will give this message u201CThe table is cross-client (see Help for further info)u201D. Press EnternClick New Entries to create new Message Type
    Fill details
    Save it and go back
    4.Assign Idoc Type to Message Type (WE82)
    Go to transaction code WE82
    Change the details from Display mode to Change moden After selection, the system will give this message u201CThe table is cross-client (see Help for further info)u201D. Press Enter.
    Click New Entries to create new Message Type.
    Fill details
    Save it and go back
    Regards
    Seshagiri

  • How to change the hardware address (MAC) of my printer to match my mac

    how to change the hardware address (MAC) of my printer to match my mac

    Hello @giomarcondes ,
    Welcome to the HP Support Forums!
    I understand that you wish to alter the MAC address on your HP Deskjet Ink Advantage 3525 e-All-in-One Printer to match the MAC address of your Mac OS X computer. Unfortunately, what you're requesting is not supported. Just to clarify, "a media access control address (MAC address) is a unique identifier assigned to network interfaces for communications on the physical network segment". They are programmed into the device and are not designed to be changed. (Source: MAC address)
    Are you experiencing issues configuring your HP Deskjet on your wireless network to communicate with your Mac computer?
    If you do actually require support configuring the wifi connection on your printer I would be more than happy to assist you with this. I look forward to hearing from you!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Maybe you are looking for