Re: How to clear Toshiba satellite model PS271L-6K906 CMOS PASSWORD?

TO: Toshiba
How to clear Toshiba Satellite model PS271L-6K906 CMOS PASSWORD?
Please Reply to my E-mail Address......[email protected]
Thank You

TO: King
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=127837
read this thread very carefully!

Similar Messages

Can't find my Toshiba Satellite model number

I've been trying to figure out if my laptop has an internal modem (I don't see it, but I want to make sure it's because it's absent not because I am missing drivers). Anyways, I cannot find the model of my laptop. The label on the bottom is gone.
I installed EVEREST and Belarc and they both just say "Toshiba Portable PC". Where and how do I find the model of my laptop?
Thanks for your help,
Nova

Thank you for your response
TECRA A11 -S3540 model is closer to my notebook.
If I install the drivers for the Tecra A11-Q-3540 will not cause a problem on my notebook?
And I had another question
My recovery has been deleted
Wrong in fdisk
I made my all hard drive to delete / destroy my
With many programs try to restore the recovery drive but did not result
How to recover my notebook drive recovery
Do you have an idea
Thank you very much from the rapid response and guidance
abdollah

How to find out Satellite Model number

Hi
I have a Satellite laptop however the model has rubbed off the back of the laptop and I do not have anyway to find out what model it is as I need to update some drivers.
Any ideas?
thanks
Jamie

You can view the model number in the Toshiba PC Diagnostic Tool. Its located in the Start Menu under Toshiba->Utilities.

Toshiba Satellite Model number M115-S1061

My other sons same make and model Toshiba laptop won't even start. You push the on button and nothing happens. The plug in lights work and the battery light but no power up. Any tricks?

Unplug the AC adapter, remove the battery, then press and hold the power button down for a minimum of 30 seconds. Now replace the battery and see if it powers up. If not repeat the process but this time leave the battery out and only plug in the AC. If it still doesn't power on repeat the process again and this time replace the battery and plug the AC back in. If it still doesn't power up it's time to start checking the hardware. Remove the ram and try it with only one stick. You might need to try each one individually to see if either works. If that doesn't help remove the hard drive and see if it will post to the Toshiba screen. If that doesn't help you'll probably need to take it to a service center.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

Toshiba Satellite model number

I need the model number to obtain a restore disk for my laptop. It is worn off the back, is it anywhere else?

Robbb wrote:
I need the model number to obtain a restore disk for my laptop. It is worn off the back, is it anywhere else?
See what information the Belarc Advisor can glean from your laptop.
http://www.belarc.com/free_download.html

Toshiba Satellite Laptop - Will Not Boot, Safe Mode Not Accessible

Hi everyone, thanks in advance for your help.
I am trying to help my mother-in-law (I know, who does that!?) with her laptop. Because of the boot problems, I can only offer you limited info on the specs, but here is what I do know.
Toshiba Satellite
Model Number PSAE6C-TJ908C
2 Gig RAM (assuming DDR2)
HDD is a Toshiba MK2035GSS 200Gig
OS Windows Vista
Bios Version 2.60
Problem:
First it would boot ok in one user account, but when booted in secondary account it would act odd, ie caps lock stayed on when not pressed, etc. Deleted secondary account, ran Windows repair function, now I cannot access the primary account, will not boot in safe mode, can not change boot sequence in setup to boot from cd or run restore disc. I have to use an external keyboard as the laptop keyboards enter key and "a" keys do not work. (New keyboard which was replaced in December, warranty has since run out, thank you Staples.)
Any and all help greatly appreciated. I'll answer any other questions you have as they come up, I realize I may have left out some key details.
I forgot to add a couple of details. When booting, it hangs at the Toshiba screen prompting for either F2 for setup or F12 for boot device selection, when you reach the log in screen it gives a number of odd sounding beeps (3 I believe), the Filter Keys box comes up, and when you try to enter the login password it will not recognize it.

Satellite A200-TJ (9PSAE6C-TJ908C)
will not boot in safe mode, can not change boot sequence in setup to boot from cd or run restore disc.
I have to use an external keyboard as the laptop keyboards enter key and "a" keys do not work.
it hangs at the Toshiba screen prompting for either F2 for setup or F12 for boot device selection, when you reach the log in screen it gives a number of odd sounding beeps
That's one sick laptop. If the thing beeps on startup and even the keyboard doesn't work, I'd figure on replacing it.
Are there important files you need to rescue?
-Jerry

Toshiba Satellite L305-S5909 - DVD ROM / CD Drive will not Run CDs

I have a Toshiba Satellite Model Name: L305-S5909 Part Number: PSLB8U-05302F running Windows Vista 64 with Service Pack 2. The Drive in my computer is, Mat**bleep**a DVD-RAM UJ88OES
I really don't know when this started but we just discovered that our DVD / CD Drive will not run any CDs or DVDs inserted. When I check My Computer or Windows Explorer the Drive shows up. Also I checked the Device Manager and it's there also. I have tried uninstalling the drive and letting Windows Reinstall it and that did not help. I have also upgraded the computer bios also no results. And I have tried different disks, cleaning the optical eye, etc. The eject command from the computer works but will not run anything inserted.
Any Ideas?

i had the same problem with my L505D-S5965. you are going to most likely have to replace the dvd drive. the optical eye burned out in mine and from what you have already tried to do to fix it. that is probably what happened with yours. if it is under warranty you can send it to the depot or take it to a toshiba service center near you. if not you can change it yourself.it not to hard.
hope that helps
-civicman4-
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Post all info about your laptop and version of windows. We are working on it but still do not have the powers to read your mind.

HT4108 How do I connect I 4 phone to Satellite model Toshiba Laptop. Tried connecting via normal charging cable into laptop & when try to open the web am advised 'The device has been disconnected or unavailable'. Amaysim is carrier.They have tethered phon

How do I connect i 4 to Satellite model Toshiba laptop. Tried connecting via cable via normal charging cable. When try yo open web advised 'this device has been disconnected or unavailable' AMAYSIM is carrier & advise they have tethered phone & should work?

Hi qwerty,
Dun tink that creative customer support sucks cos I had been dealing with them in the past and I can say that their service are quite gd and fast. If you wanted a refund, I tink you need to contact the store that sells you the product. Dun tink creative will refund you though.

How do I hook up the audio on Toshiba Satellite L555D-7005 to TV

I have a Toshiba Satellite L555D-7005 notebook and I am trying to get the notebook audio to play out my Insignia™-(22" Class / 1080p / 60Hz / LED-LCD HDTV-NS-22E450A11) TV. The only connection I could see working to stream video to the TV from the notebook was with a RGB to RGB cable. That worked for the picture, but not the sound. I bought an audio cable with one end that fits the headphone out hole on my computer and the other end has r RCA plugs that fit into the red and white audio holes on the TV. The cables and the TV are color coded with red and white plugs and everything seemed to fit properly, but sound will not come out on the TV. I am wondering if anyone out there with a L555D also has an Insignia Tv and can tell me how to hook up the audio. Also, I read that the RGB cable is provides the lowest quality picture. Is thee a better way to hook up the video? I would appreciate any information anyone can share ! Thanks, Cindy
Here are the features listed for the TV:
Product Features
21-5/8" screen measured diagonally from corner to corner
Optimal for viewing in medium size rooms.
Ultraslim design (1-1/2" deep)
Ideal for wall mounting (with optional mounting kit, not included).
High brightness (250 cd/m²) and incredible contrast (1000:1 native, 2500:1 dynamic)
For an arresting viewing experience.
1080p display
Provides the highest quality progressive-scan picture possible from a high-definition source.
SRS TruSurround Sound system
Provides a theater-like surround-sound experience, with clearer dialog and the enhanced bass sounds.
Audyssey Dynamic Volume
Set your preferred volume level to make soft dialog clearer, commercials won't blare and sound it will be at it's richest automatically.
Inputs
Include 1 component video (side), 1 PC (rear), 1 PC audio (side), 1 RF (rear) and 3 HDMI (side).
Outputs
Include 1 optical digital audio (rear) and headphone jack.
3 HDMI inputs
HDMI cable not included. High-speed HDMI cable is the only connection that can deliver a full HDTV experience with a full 1080p picture and digital surround sound.
PC video input
Lets you connect your computer to experience high-resolution images.
USB port
For quick connection of a digital camera or other USB device.
Additional Handy features
Include a sleep timer, INlink and channel labeling

Hi
I looked at the specs for your laptop and there is no HDMI out port for this model but RGB & Headphones out jack should work. Here is the link for closeup views of the ports.
http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?modelFilter=L555D-S7005&rpn=PSL...
Click on product tour.
Qosmio X505-890=i7-740QM-6GB DDR3-64 GB SSD-500 GB SATA-
BR-Rom-DVD Burner-HD 18"Display-GTS360M-1GB-GDDR5
HP 17 Envy 3wks Returned
DIY Desktop Builds

How to tell if Firewire 400 or 800? In any OS and this laptop: Toshiba Satellite A350D - BA3.

Hello.
I was wondering how someone can tell the difference between Firewire 400 and 800 in their computer and in this model of Toshiba laptop: Toshiba Satellite A350D - BA3?
If a person looked in device manager or something would it say? With Usb it says Enhanced when it is usb2 compared to usb1. I don't know what usb3 says, I don't have it.
With firewire there is large sizes and small. On my laptop it is a mini firewire and it looks like a 4-pin inside. On the toshiba.ca site, in the product specs, it only says firewire.
I am planning on buying a cord that has a large connection on one end and a small connection size at the other end. Eg: Some cables for firewire are a 4-4pin, 6-4pin, 6-6pin, 9-4pin,9-6pin,9-9pin. There are also firewire 400 to 800 adapters. I'd like to buy the right cord for an external enclosure I bought to connect to the small laptop firewire port. The enclosure is a Vantec NexStar 3, 3.5" enclosure, usb2, eSATA, Firewire a/b. It has two firewire b ports in back, but an included cord converts b-a (the a is still to big for the laptop firewire).
Does anyone know if any of the mini ports are as fast as the larger ports? Will a 9-pin firewire 800 cable converting to a mini connection go at the mini connections speed if it is only firewire 400, I don't think it can force full F800 speed?
Thanks.

Hello.
I was wondering how someone can tell the difference between Firewire 400 and 800 in their computer and in this model of Toshiba laptop: Toshiba Satellite A350D - BA3?
If a person looked in device manager or something would it say? With Usb it says Enhanced when it is usb2 compared to usb1. I don't know what usb3 says, I don't have it.
With firewire there is large sizes and small. On my laptop it is a mini firewire and it looks like a 4-pin inside. On the toshiba.ca site, in the product specs, it only says firewire.
I am planning on buying a cord that has a large connection on one end and a small connection size at the other end. Eg: Some cables for firewire are a 4-4pin, 6-4pin, 6-6pin, 9-4pin,9-6pin,9-9pin. There are also firewire 400 to 800 adapters. I'd like to buy the right cord for an external enclosure I bought to connect to the small laptop firewire port. The enclosure is a Vantec NexStar 3, 3.5" enclosure, usb2, eSATA, Firewire a/b. It has two firewire b ports in back, but an included cord converts b-a (the a is still to big for the laptop firewire).
Does anyone know if any of the mini ports are as fast as the larger ports? Will a 9-pin firewire 800 cable converting to a mini connection go at the mini connections speed if it is only firewire 400, I don't think it can force full F800 speed?
Thanks.

Satellite M30x, How can I find out model number?

Hi
have to get drivers for my good old Toshiba Satellite M30x******* . The stickers underneath are washed out and i can not read the model number anymore.
How can I find out the model number to get the correct drivers?
Thanks for Help

Hello
I have checked Toshiba download page and for Satellite M30x there is one model only PSA72E.
So just visit Toshiba download page under http://eu.computers.toshiba-europe.com > Support & Downloads.
When you open download area under product type choose option ARCIVE and you will find drivers for your notebook model.
If you have more questions please let us know.
Good luck!

How to install windows xp over vista on a toshiba satellite A200 1YO

How to install raid/scsi drivers and get rid of vista for good
what you will need
â?¢ 1 USB external floppy drive
â?¢ 2 floppy disks
â?¢ 1 set of drivers for the hard drive you have in the computer
â?¢ a legal copy of windows xp pro
WHAT TO DO WITH THE FLOPPY DISKS
COPY THE DRIVERS DONT CUT AND PASTE THEM
â?¢ get DISK 1 and place the drivers required onto the disk as they are without any folders
â?¢ get DISK 2 and make a folder called $OEM$ and within that folder make another called TEXTMODE then within that folder insert the drivers that you have in disk 1
Installing the drivers and windows xp pro
â?¢ when windows asks you to press F6 to install raid drivers press F6
â?¢ then enter DISK1 into the floppy drive
â?¢ when it prompts you to press "s" to install...install the raid and storage controllers
â?¢ press "s" again and press enter on the same raid driver you just told windows to use
â?¢ windows will then say that it already has drivers for the raid controller
â?¢ press the appropriate key to tell windows you want it to use the floppy drivers instead of windows own
â?¢ after the drivers load remove the floppy disk
â?¢ wait until windows asks for the drivers again and insert DISK 2
â?¢ and windows will install at long last vista is GONE you will need the drivers for any hardware your computer system but they should be easy to get from the manufacturers web site
I have used this method and it worked with a Toshiba satellite a200 1yo laptop with no problems
PLEASE LEAVE COMMENTS ON HOW YOU GOT ON TO LET OTHERS KNOW THAT THIS METHOD WORKS THANKS
Message was edited by: tamwilson

How to install raid/scsi drivers and get rid of vista for good
what you will need
? 1 USB external floppy drive
? 2 floppy disks
? 1 set of drivers for the hard drive you have in the computer
? a legal copy of windows xp pro
WHAT TO DO WITH THE FLOPPY DISKS
COPY THE DRIVERS DONT CUT AND PASTE THEM
? get DISK 1 and place the drivers required onto the disk as they are without any folders
? get DISK 2 and make a folder called $OEM$ and within that folder make another called TEXTMODE then within that folder insert the drivers that you have in disk 1
Installing the drivers and windows xp pro
? when windows asks you to press F6 to install raid drivers press F6
? then enter DISK1 into the floppy drive
? when it prompts you to press "s" to install...install the raid and storage controllers
? press "s" again and press enter on the same raid driver you just told windows to use
? windows will then say that it already has drivers for the raid controller
? press the appropriate key to tell windows you want it to use the floppy drivers instead of windows own
? after the drivers load remove the floppy disk
? wait until windows asks for the drivers again and insert DISK 2
? and windows will install at long last vista is GONE you will need the drivers for any hardware your computer system but they should be easy to get from the manufacturers web site
I have used this method and it worked with a Toshiba satellite a200 1yo laptop with no problems

How do I install Ubuntu on a Toshiba Satellite L670D-102

Hello
I have been trying to load Ubuntu 10.10 (tried both AMD64 and i386 versions of Desktop Edition) onto a Satellite L670D-102 using a Live CD. The CD spins for a while, there is some activity on the hard drive and then I get a flashing white cursor (a hyphen) on a black screen. I left it all night and it remained the same. I tried with a 'live' usb and again, no boot. The cds and usb work in other machines running both amd and intel cpus.
The sort of questions that spring to mind are:-
Is there some security or other setting within the cmos that prevents anything other than Windows being loaded?
Are Toshiba simply anti- Linux and I need a new machine?
Do I need a special bios to run Ubuntu?
Any help in resolving the issue would be welcome.

Hi
I use a Toshiba Satellite L655. It came with a Win7. The first thing I did after buying it was to wipe out Win7 and install ubuntu 10.10 on the entire hard disk (not a dual boot or Wubi install). Now I want to try out ubuntu 11.04 beta from a live usb and I am trying to change the boot order. The laptop doesn't boot from the usb drive. I am unable to enter the BIOS. I have tried pressing ESC, F2 etc while switching on the laptop. So far, I have not been able to access the BIOS setup.
I have tried googling and I read about Toshiba's "legacy-free" laptops. But am not sure if mine is such a one. Now, I don't have Win at all in my laptop. I have only ubuntu 10.10. I need to access the BIOS setup and change the boot order so that my laptop boots from the USB drive. How do I do this?
Any guidance would be welcome.

How will i know the model of my Satellite M100 series?

just my last thought. How will i know what model am i using, it is satellite m100 series but i still dont know what specific it is...
thanks for helping

Hi Enrique
Its very simple to find it out.
At the bottom of the unit you will find the label which provides all this useful information.
You should also find the number beginning with the PSM.
This number is important to identify your notebook model for example
for driver download.

Help with identifying the Model of a Toshiba satellite

I have a Toshiba Satellite
I believe this is a A105, but don't know the full model number.
I ran Belarc Advisor. It did not give the full model.
Thanks, Bob

Hello Robert.
If per chance you are Canadian, go to the Toshiba.ca site and let it identify your model automatically. I had to do this as mine, like yours, might not be listed on the .com site.
.ca vs .com !

Re: How to clear Toshiba satellite model PS271L-6K906 CMOS PASSWORD?

Similar Messages

Maybe you are looking for