Re: How to connect Equium A200 to TV

How do you connect to TV with Equium A200 series?

Hi
> I have not got an s-video port on laptop only a 15 pin external monitor port
Hmm then you need an adapter which would allow connecting both ports; RGB port and s-video port.
Check this:
[VGA adapter cable RCA converter to s-Video |http://m2.sourcingmap.com/smap/images/item/n/06d/ux_a06110700ux0051_ux_n.jpg]
Bye

Similar Messages

  • How to connect Equium A100 and second computer via LAN

    hi,
    i was wondering if someone could help me.
    My partner and me are having some difficulties with creating a LAN between his computer and my laptop.
    Basically the gist of it is that his computer can see my laptop, but it's not recipricating.
    My laptop is the Equium A100 (XP media centre) and all we really know about his computer is that its dual pentium 4, windows XP home edition and that is is a complete pain in the rear end!

    Hello
    Check this topic http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=3423&messageID=11170
    There is described how you can connect two PCs using crossover cable.

  • How to connect PCMCIA Type II card to my Satellite A200?

    I have Satellite A200-19L (NEW) laptop
    could you guide me how to connect a ( Type II PCMCIA Card ) to my laptop
    Because I think that this laptop dose not support this card.
    Your fast response is required
    ASEM

    Hi
    If you think the Satellite A200 does not support this card so how do you want connect this PCMCIA Card Type II if the compatible slot is not available???
    As far as I know this unit supports only the Express Card slot and the PCMCIA slot in not supported!!!

  • Equium M40X-189: How to connect RGB port to RS232 port?

    Hi,
    as you know the Equium M40X-189 P-M 730/XP has an RGP monitor port and does not have RS232 port.
    Im working with Auto-titration device which require RS232 port for connection!
    Any idea of how i can connect my notebook to this device!
    pls help
    thanks
    Omrankl

    Hi
    As far as I know the RS-232 port is a serial port and I dont think that its possible to connect the RGB port to the RS232 port.
    But I have found the useful website:
    http://www.ontrak.net/usb.htm
    There you will find a description how to connect the USB port to a RS-232 port.
    You need a ADU interface.
    Check the link.

  • Equium A200 can not connect to the interest using Wifi

    Hi,
    Since having to reinstall Windows Vista Ultimate, I can not connect to the interest using Wifi. It works fine for Ethernet, but when choosing the "Connect to the Internet" screen, its blank and will not find any wifi connects or let me manually connect to one.
    In Device Manager under Network Adaptors, it now only shows the Ethernet Controller and not the Wifi adaptor. I have tried to download the driver from this site and after rebooting nothing has changed. I have made sure the machine has all the latest Windows updates as well. I have also mader sure that the wifi button is switched on at the front of the machine.
    Also one a side note I cant seem to find the exact name of the Laptop in the system section of Control Panel other than Equum A200. On the download driver page there is NOT a A200 listed only A300 and A300D.
    http://uk.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=UK&mode=allMachi nes&action=search&teddProduct=759&selShortMod=667
    Any help would be grateful.
    Spec:
    Windows Vista Ultimate
    Toshiba Equium A200
    32-bit Operating System

    >Also one a side note I cant seem to find the exact name of the Laptop in the system section of Control Panel other than Equum A200. On the download driver page there is NOT a A200 listed only A300 and A300D.
    I guess you didnt look into the Archive the A200 is a little bit older therefore the drivers are placed in Archive!
    If you want to know what driver you need then I recommend checking this faq:
    http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78
    All Wlan drivers can be found here:
    http://aps2.toshiba-tro.de/wlan/

  • Limited connection on WLAN - Equium A200

    I bought the Equium A200, which has Vista Home Premium preinstalled, today. I fired it up, went through the installation procedure and tried to connect to my WLAN, with no success. It can connect to the router, but it does not receive an IP so there is no internet access on it.
    One other and older notebook right besides it which has XP connects just fine to the WLAN. Should I just install XP instead, and if so is there drivers for everything? I'd rather not though, since I am pretty happy with Vista.

    Hi
    I dont see any reasons why you should be not able to install the XP on this notebook.
    The some XP drivers for this A200 Equium are released on the Toshiba page. If some other drivers would be not available in your A200 series download area, then you could try to install some XP drivers from other A200 series (Equium or Satellite)
    But the XP installation is not necessary if you want to use Vista. Using Vista you should be able to connect to the WLan router too!
    In first case I would recommend updating the Wlan driver.
    Then try to configure the Wlan again. Be sure that you use the right encryption key and that other security settings like Mac address filtering are configured properly!
    This Microsoft page provides useful info about
    [Connecting to Wireless Networks with Windows Vista|http://technet.microsoft.com/en-us/library/bb878035.aspx]
    Best regards

  • How long do batteries last after full charge on Equium A200?

    Hi
    Just bought an Equium A200, and charged it for around eight hours, when I start up the battery life doesnt seem very long to me. Is says about 1hr 12 mins of life left. Doesnt seem like very long after an eight hour charge.
    Is it normal to only get just over an hour of use time on laptop after fully charged? Never had one before. Appreciate any input.
    Thanks

    Hi guys
    The battery life time depends on the notebook usage! So its not easy to say how long the notebook should run on battery power. But I think the 1hour 30min is a realistic period.
    However, if you want to run the notebook for a longer period then you could buy a stronger battery which provides more power for a longer time
    You should take a look at the mA value; the higher the better ;)
    Furthermore please dont forget that the installed Vista OS needs more power as a early OS like XP.
    The Vista needs more power because it wastes more computer resources.
    I read that an same notebook would run 2 times longer on battery power with preinstalled W2K or XP.

  • Equium A200 - How to remove display?

    Hi.
    I need to remove the screen on my Equium A200 but there doesn't appear to be any screws to get into it.
    None of the guides I have found work for this model.
    Does anyone know how to do it?
    Thanks,
    Dan

    Hi
    The notebook disassembly is not really easy its really tricky.
    If you have no experience then you should not do this you could damage some other parts
    But as far as I know you have to remove the keyboard and top cover assembly.
    Then you could remove the four screws located under the rubber covers. This will allows you to remove the LCD screen bezel.
    In further steps you will have to remove the screws securing display hinges.
    As I mentioned above; its not so easy and be careful if you would disassemble anything

  • Satellite A200 - How to connect to TV?

    Hi, Dear.
    How I connect my laptop to tv with S-video Media Cable or VGA-RGB cable? I tried to connect by Fn+F5 but no signal comes out. If I use VGA -RGB cable something is comeing out on TV but its scrolling continuously .
    Kindly assist me..

    Hi
    You can use both cables to connect your notebook to TV. Its depending on the interfaces on notebook and TV but in both cases its the same:
    Connect the cable to notebook and TV, power on your TV and select the right channel and then power on your notebook. After boot procedure you can switch with FN+F5 between monitors.
    If you use S-Video cable make sure that you are using the right television encoding system, e. g. PAL or NTSC.
    > If I use VGA -RGB cable something is coming out on TV but its scrolling continuously .
    What settings did you use (screen resolution, screen refresh rate, etc.)

  • How to disable TouchPad 'tap to click' on Equium A200-15L under Vista

    Until mid-December I had the Synaptics Touchpad 'tap to click' disabled. Then it somehow became enabled , the right-click menu item to change it greyed out and the mouse properties, settings etc contain no reference to it. It has been suggested that Windows Updates somehow interfered. I have tried uninstalling and reinstalling touchpad drivers both directly from Synaptics and from the Toshiba site, but it hasn't helped. Apart from using the recovery disk and reformatting what can I do?
    Toshiba Equium A200 15L Laptop (PSAE2E). Windows Vista Home Premium.

    Hi Juliana
    I have read also about the Vista updates which could affect the touchpad settings for me it sound very mysterious
    I thought about the same touchpad driver reinstallation procedure.
    But it looks like this doesnt help to get the click functions back.
    I think the recovery CD would be the last resort.
    Good luck

  • Printer sharing with Equium A200

    Hi, have aquired a Equium A200 and have connected it wirelessly to another PC in my house via a wireless modem router.
    I have the connection sorted and all works ok, except when I try and printer share.
    The printer connected to my older pc is an epson RX620, and the older computer runs on XP. I can find the printer on the laptop but when I double click I get an error message:
    " windows cannot connect to the printer, access denied"
    I have gone through everything i can think of, but still wont happen. Could it be because the laptop is running vista and the pc is XP?
    Although i have been told by epson that the printer should work with with the laptop. Any thoughts or advice greatly appreciated.
    Cheers

    I think I found a solution :)
    I have googled a little bit and this should helps to share the printer with Vista and XP.
    - Access the Control Panel.
    - Choose printer. Then choose Add Printer.
    - Choose Add a local printer and click on Create a new port. The default in the drop down box is Local Port. Do not change that. Click Next.
    - A dialogue box will appear asking for you to enter a port name.
    - Type in \ \computer name\printer name ie. printer name is EpsonRX620 so I typed in \\basement\epsonRX620
    Hope this helps.

  • Ipod won't work under Windows Vista on Equium A200

    I've had my Ipod for over a year now i used it fine on my old computer which was running on XP.
    I now have my laptop Equium A200 series running on vista.
    When i first connected my ipod to it it showed up and asked if i would like to connect my ipod to this computer instead of the other pc so i accepted.
    It cleared all my songs so i can put my new music on.
    Once it had done this my laptop could not pick up my ipod anywhere.
    When I connect my ipod in the laptop makes a noise to show it's recognised it's been connected, but when i go to itunes it doesn't show up.
    I've been into device manager to check there it has a ipod symble with an ! mark next to it, so i click update driver but nothing is ever found.
    My Ipod charges fine and works fine, i've been on apple website looking for solutions i've restored my ipod everything they've sugested but nothing seems to work. Can someone please help me i miss using my ipod.
    Sorry if i've posted this in wrong place first time user don't know my way around the site yet.
    Many thanks if you can help.

    Hm, maybe you should reinstall the Ipod software. That would be the only idea I have. Otherwise you should take a look at the BIG Apple forum. ;)
    Nice weekend and good luck

  • Certain keys not working on Equium A200-196 after Windows 7 update

    Hi all, I've just upgrade my partner's laptop (a Toshiba Equium A200-196) to Windows 7 after initially installing Windows XP on it (it came with Vista).
    After the XP update, I noticed certain keys weren't working. I can't remember the process I used to fix the issue, but fix it I did, and they were all soon working perfectly. So it was a software issue, rather than hardware. I think it may have had something to do with the FN key - but I can't be sure.
    Now I've just upgraded the same machine and I have exactly the same problem. The keys that don't work are Backspace, W, P, F, H, K and L.
    Can anyone help please? I've tried reinstalling Win7 and the problem is still there.
    Many thanks,
    Andy

    >The keys that don't work are Backspace, W, P, F, H, K and L.
    These keys have nothing to do with the missing software.
    Indeed, the function key (FN key) needs an installation of particular Toshiba utility / software to get it working but the Backspace, W, P, F, H, K and L keys are common keyboard keys which dont needs any special software.
    Therefore I think the issue is hardware related: simple keyboard malfunction.
    I guess all these keys would work properly if you connect and use external USB keyboard.

  • Equium A200-196: Cannot get all speakers to work with Creative T7900 home cinema system

    I run windows Vista home premium, on my Toshiba Equium A200-196, and i have a 7.1 Creative T7900 system.
    I cannot get all speakers to work. Only the woofer and two front speakers are currently playing sound.
    The sound option in the control panel doesn't give me any options besides stereo speakers.
    I have no option of selecting 5.1 or 7.1 speakers and i need to know do i need a software driver (all drivers are showing up as up-to-date), or do i have to change some other option, or purchase an external sound card?
    I only have two jack inputs, a mic in and headphone out. How can i get all speakers to work and achieve the home cinema experience?

    Hi there,
    I dont think that the sound card is capable to do 5.1/7.1 since there are many more jacks required then only one "sound-output".
    If I were you I would purchase a external USB-soundcard which is capable to do 5.1 or 7.1 to deliver you the full home-cinema experience.
    Another solution is not existent. Sorry mate.
    greets

  • BIOS problem on Equium A200

    Hy ...
    I have a problem with my Equium A200 laptop!
    I tried to update my bios, I downloaded the update from the site and when I executed it, the computer stoped responding. I left it like that 30 min and ... still no response. I removed the battery and unplugged from power source and now it doesn't starts.
    Please someone give me an advice how could I fix this problem.
    I know I can reprogram the bios with an eeprom writer but I would like to know if there is something else I can do?
    thanks ... mircea

    Hi friend,
    theres nothing you can do. I assume you have still some warranty left on your machine. Dont waste your time with re-programming an eeprom which is not really accessible with an normal eeprom writer (believe me, I know what I am talking about). Just click [HERE|http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_whitepaper.jsp?service=EU&WHITEPAPER_ID=0 000000871], contact the nearest available service partner in your country and let them fix that problem so you wont have any further problems with your machine.
    GReets

Maybe you are looking for