Re: How to create and export a still frame from a movie in iMovie 09

The tip above is ready to be posted.

First, click iMovie/About and see which version you have.
Versoon 9.0.2 would be iMovie 11.
Follow the instructions [in this post|http://discussions.apple.com/message.jspa?messageID=13065602#13065602]
If you have Version 8.0.6, that is iMovie 09 and you should see the Reveal In Finder option.

Similar Messages

  • How to create and export a still frame from a movie in iMovie 09

    Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
    Are you working in iMovie and realize that certain frames in the movie would be perfect as photographs? Here is how to extract them...
    *To get a still frame from an Event*, right-click on the frame and select "Add Still Frame to Project". The still will be added to the end of the current project. Right click on the still frame in the project and select "Reveal in Finder". You will see a jpeg file that is highlighted. Drag this jpeg file in the finder to the iPhoto icon on your dock.
    *If you want a still from a project*, rather than an event, the process is similar, except you right-click on the frame and select "Add Freeze Frame", and it adds the freeze frame at the end of the clip rather than at the end of the project. Right-click/reveal in Finder, drag JPEG to iPhoto icon in dock.
    *If you are not using iPhoto*, and just want to save to your desktop, click Reveal in Finder as above, then COPY, then PASTE to desktop.
    Hint: If you do not want to clutter up your iMovie Project with stills at the end that you would have to go back and delete, then create a separate iMovie Project just for your stills, and follow the instructions for capturing stills from an Event.
    Note: If you do not have a right mouse button, then control-click will work instead of right-click.
    This is the 1st version of this tip. It was submitted on Dec 5, 2009 by AppleMan1958.
    Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

    First, click iMovie/About and see which version you have.
    Versoon 9.0.2 would be iMovie 11.
    Follow the instructions [in this post|http://discussions.apple.com/message.jspa?messageID=13065602#13065602]
    If you have Version 8.0.6, that is iMovie 09 and you should see the Reveal In Finder option.

  • How do i create a still frame from a clip in iMovie 11? thanks

    Good morning. How do I create a still frame from a clip in iMovie 11.  Thanks

    First, get an app called MPEG Streamclip, which is free. (google MPEG Streamclip from Squared 5)
    Open MPEG Streamclip.
    In iMovie, select the clip you need. Then, right-click/Reveal in Finder.
    Drag this clip into MPEG Streamclip
    In MPEG Streamclip, move the playhead to the frame you want.
    In MPEG Streamclip, click FILE/EXPORT FRAME.
    Choose JPEG, TIFF, or PNG and give it a name.
    You can then drag this photo into iPhoto.
    Here is a video I made that steps through this...

  • Can you send/export a still frame from an FCP sequence?

    Can you send/export a still frame from FCP as a picture to the desktop? Doesn't matter if it is a .jpeg, .tiff, . bitmap
    G5 Mac OS X (10.4.8) Dual 1.8

    serach the forum for any of the hundreds of posts detailing this process -
    my personal favorite is shift-N, apple-9, type name, drag to bin, batch export.
    The best thing about the batch export queue is you can set up a batch with the file format and destination folder and then keep adding new clips/stills to export.
    Hope this helps -
    Max Average

  • Create and export a still image form video?

    How do I create and then export a still image from my video? Is it the same as freeze frame? It seems like that is different? I looked on youtube and a guy was telling how to do it, but he said to go up to share at the top and it is not there on my version. I think perhaps he was using an older version.. So to cut to the chase.. How do I create a still photo form my vdieo then export it to desktop or iphoto?

    You seem to have added to "Save Current Frame" option to the destinations, but you are not using, if what you are outputting is a video file and not a still image file.
    Now, click Next..., choose a file name and folder to save it on. That is just that.

  • How to export still frame from Quicktime movie?

    Hello folks
    I often need to use a still frame from a quicktime movie as an image file to work with in PhotoShop for windows.
    If I export a frame via the export command and choose "Movie to picture" I end up with a .pct file, that Photoshop will not open.
    I can open the .pct file with the Quicktime PictureViewer and then export it from that app as i.e. a JPEG-file, but I would like to avoid that extra step and just export a usable file straight from QT.
    Anybody know how that can be done?
    Best regards
    Kris

    Same problem here - no matter whether I choose Photo - JPEG or PNG format as the "compressor", QT 7 Pro wants to save with a .pct extension, and changing it to .jpg or .png extension fails to open.
    The two workarounds I've found are:
    1. Save it in Photo - JPEG or PNG format with a .pct extension, open with Photoshop CS4 or below, save to desired format.
    One may be able to accomplish the same using Preview instead of Photoshop, but on my Snow Leopard machine I get the error "The PICT file format is not supported in 64-bit mode. Try selecting "Open in 32 Bit Mode" in the Finder's info window for Preview." and I don't feel like bothering to do this.
    2. Use Grab to take a screenshot, copy into Preview, crop as necessary and save to desired format.
    Which is easier depends on whether you feel like having to do precision cropping or not. Totally agree with above commenters - whither PICT, Apple?
    Message was edited by: Daniel Toman

  • How to create and export a sharepoint list connection file to excel connection file library from power pivot?

    Hi All,
    I'm new to SharePoint and Power BI.
    I've to use  share point 2013 lists to create power view reports. For that, I need to create Power Pivot in Excel 2013.
    I'm fine with the above. We normally take a data feed of a list and create connection to that. We need to create a connection file (.odc) and export it into a excel file connection library of Share point. The connection to be made to share point list. The
    power pivot will be having multiple related lists.
    How can I create a connection file which is referring to share point list
    Please suggest.
    Regards,
    Julie

    Hi All,
    Finally, I could find the answer for this question after a long search.
    First of all, open a new excel file in server.
    Data-->From other connection-->From data connection wizard-->data feed-->Location of the data feed-->
    http://sharepointsite/sitename/_vti_bin/ListData.svc
    -->next-->select the lists which you need-->next-->only create connection-->properties--->export connection file
    -->ok
    The connection file has been created and .odc file exported to the specified location.
    Open power pivot and check the connection in existing connections.
    Exported file has to be uploaded in Excel file connection library of share point 2013. So that you can refer the same in this excel file when you upload it into share point.
    Regards,
    Julie

  • How to create and instance of Java Object from an XML Document.

    Hi,
    How can we use a XML Document to create an instance of Java Object and do vice versa ie from the Java Object creating the XML Document.
    XML Document is available in the form of a String Object.
    Are there helper class available to achieve this.
    I need to do this in a Servlet.
    Regards
    Pramod.

    JAXB is part of JavaSE while Xmlbeans claims full schema support and full infoset fidelity.
    If the standard APIs do all that you need well then use them.

  • I took a still shot from old movie in iMovie and now want to work with it on desktop.  How?

    I took a still shot from an old family movie in iMovie.  Now it is a still in my project library of iMovie.  How can I copy it and put it on my desktop where I can email it?  I need to get it out of iMovie and onto my desktop.  Help!

    See this User Tip for how I do it.
    https://discussions.apple.com/docs/DOC-3231

  • How to Create and export motion data from After effects CC to Flash CC

    Hi there ,
    Basically what I've got here is as follows.
    I have a small character animation (about 100x100 px) - that is running inside a screen of 1280x720 px.
    I want to hold the caracter in one position (so that I can get ridd off the useless alpha. i guess i will do that manually by keyframing)
    and also to give a motion data to be used in Flash CC - to assemble the original animation.
    Can anybody help me out with this?

    Yeah, that's one of the reasons that we removed it: no one was using it. And it was terrible.
    Here's more information:
    http://forums.adobe.com/message/5555577
    Of course, if you _do_ want this feature, it's relatively easy to save the project back to After Effects CS6 and then use After Effects CS6 to create an XFL file. Keep in mind that all Creative Cloud subscribers have access to CS6 versions, too.

  • How to create and modify an XML file from an Oracle Form

    I would like to build an Oracle Form to maintain a small XML file in the file system (i.e. Not in Oracle database but in the operating system).
    I would like the Form to display existing values from the XML file and the user can update and save content back to the XML file.
    Can any one tell me how this can be done? Thanks.

    Does Forms 9i provide any XML Parser Functions?
    Can I insert the XML file into a table column by inserting XML using the XSU Front End rather than using TEXT_IO to maintain the XML file directly?
    Can I use XSU PL/SQL API in Forms to retrieve and modify XML values?
    Any help is appreciated.

  • Is there a way to create a still image from video in either imovie or iphoto?  I want to add an arrow to an imovie and so far have not had any luck but I'm thinking I might be able to add an arrow to a photo and then incorporate it into the movie.

    I'm still trying to point out a location in an imovie with an arrow.  I thought I might be able to insert an arrow in a still photo from the imovie and then reinsert the photo in the movie but my attempts at capturing a still frame from a video in imovie or iphoto haven't worked so far.  Any ideas any one???

    First, get an app called MPEG Streamclip, which is free. You can find it by googling MPEG Streamclip Squared 5.
    Open MPEG Streamclip.
    In iMovie, select the clip you need. Then, right-click/Reveal in Finder.
    Drag this clip into MPEG Streamclip
    In MPEG Streamclip, move the playhead to the frame you want.
    In MPEG Streamclip, click FILE/EXPORT FRAME.
    Choose JPEG, TIFF, or PNG and give it a name.
    Also, for how to add a pointer, try Karsten Schluter's website for a good post on how to do this.

  • Exporting Still Frames from iMovie

    I have managed to extract still frames from videos and put them back into iMovie. I would now like to export some still frames from iMovie and put them into a Word document. I can't seem to figure out how to do this. Any ideas?

    set playhead at wanted position of clip ..
    ctr-click, choose 'add still frame to Project'
    in Project window, click on new clip, ctrl-click, choose 'reveal in Finder'
    from Finder, copy .jpg to any other location of harddrive
    drag that copy into your document..

  • FCP : export a still frame

    Here is something one never wants but my client does: how can I export a still frame from FCP (I am rendering froma SVHS tape to DV-PAL)

    Use the the QuickTime conversion/still image option from a parked playhead.

  • How can I email a video clip I downloaded into my iPhoto library to my friends? I tried creating an email and attaching the clip but there is no sound and no picture when the 5 minute attachment "plays." How can I file= export it to them from iPhoto?

    How can I email a video clip I downloaded into my iPhoto library to my friends? I tried creating an email and attaching the clip but there is no sound and no picture when the 5 minute attachment "plays." How can I file=>export it to them from iPhoto?

    Have them install Quicktime on their PC's from Apple's website, that's the easiest fix.

Maybe you are looking for