RE: How to export keywords tied to images

Can someone give me a step by step as to how to export keywords from one computer so that they will be linked to images in an identical folder in another computer? Haven't been able to find a clear answer in this forum.
Thanks.
Tice

Hi Jerome,
I figured out that a change has to be done to load in the configuration, specifically in the Prepare View Stream component.
Have you reviewed my comment on this post?
https://wikis.oracle.com/display/endecainformationdiscovery/Export+View+Configuration
Hope everything is fine on your side :)
Thanks
Matthieu

Similar Messages

  • How to export diagrams as vector images (.svg, .pdf)

    Dear all,
    I have a series of models designed with Eclipse Luna (mostly Papyrus 1.0.1) that I would like to include in a document as vectors (for the best printing quality possible).
    Exporting these diagrams in Eclipse Luna itself results in the error reported in Bug 459978. This bug has been marked has fixed on Mars (Papyrus 1.1.0), however, diagram export in Mars is totally non functional (whichever the image format), as reported in Bug 473803.
    I have also tried exporting these models with Kepler, but that older version of Papyrus fails to recognise the diagrams included.
    So the question boils down to: how can I export diagrams as vector images? Is there any alternative software that I could use? Or perhaps can I rely on some other strategy?
    Thank you for reading.

    In case you may wonder, Bug 473803 prevailed onto Papyrus 1.1.1. It thus remains impossible to export diagrams as images in Eclipse Mars.
    Thank you.

  • How to copy keywords from one image to many in Bridge CS6 (workaround)

    I see a few questions about how to do this, but I didn't see this workaround (maybe it's even the workflow Adobe had in mind). Hope it helps others searching for this.
    To copy keywords from one photo, and then apply the same keywords to many, in Bridge CS6:
    Select one image that has the keywords you want to copy.
    Right-click and choose File Info...
    On the IPTC tab, scroll down to find the Keywords field. Select and copy the keywords you want (probably all).
    Click Cancel to exit without making accidental changes.
    Select the files you want to add the keywords to.
    Right-click and choose File Info...
    On the IPTC tab, scroll down to find the Keywords field.
    Click in it and paste your copied keywords.
    Click OK. Keywords are applied to all files. (NOTE: I think this replaces keywords, rather than adding to them).
    I'm using CS6 on OS X 10.6.8.

    Sara,
    Why wouldn't you just use a Windows .bat file with xcopy statements?  You could even schedule it to run with the Windows task scheduler.
    Regards,
    Jeremy Good

  • How to keep "keywords" with the image?

    I needed more space so I added a new hard drive and copied all my images to it (via Windows Explorer). Bridge (CS5) will only  display the "keywords" I've added to the images when I access them from the original drive, but not for the copied images on the new drive. How do I keep the keywords I've added to the images on the new hard drive?

    Keywords are added to the image, so it will make no difference where you view the image.   When copying images it is best to use Bridge as some programs do not copy the XMP file.
    To check in Bridge click view and show hidden files.  The XMP file will have same name as image if present.  Will see on edited raw files.
    THen look at same file on new drive and see if you see the same XMP file.

  • How to export w/ lo-res images?

    I want to send an .idml file to a copywriter, but with the hi-res images (300dpi) I've placed, the file is 512 MB. I'd rather send him something smaller- is there a way to automatically export the file with 72dpi versions of my images?

    IDML files shouldn't be openable in older versions of InDesign.
    IDML is a CS4 feature, and I think they only transfer amongst CS4 (v6) of InDesign.
    Perhaps they're thinking of .inx, which is how you save back a version, but any bells or whistles that CS4 has are lost in translation back to CS3, like cross-references for example, CS3 does not have that feature, so if you use Cross References from CS4 then they are reduced to plain text on saving back to CS3.

  • How to Export keyword hierachy to flickr

    I use a keyword hierarchy to tag my photo.
    For instance
    Australia :: NSW :: Sydney
    In that way, I tag my picture from Sydney only with the keyword Sydney but if I look for pictures from Australia, I still get the one tagued with sydney in the search result.
    Is it possible to export the full hierarchy of keyword (Sydney would be translated into Australia, NSW, Sydney) to flickr without adding some plugin to Aperture

    Short  answer is no.
    The apparent keyword hierarchy in Aperture doesn't exist outside of Aperture. While you can search in Aperture for Australia and get the images tagged Sydney in reality only the keyword Sydney is applied to the image and only that keyword will show up on export.
    If you want to do what you wrote you would need to tag the image with the entire hierarchy yourself.
    This has  been the case since Aperture 1 and has been complained about many times but it doesn't appear that Apple will be changing keywording any time soon.
    regards

  • How to export Keynote presentation as images that retain their order

    When I build a Keynote presentation that I then export as images to show in photo album Keynote exports the slides as sequentially numbered images. When the images are uploaded to the iPad the order becomes random. Any one know a way to force the iPad to display the images in the desired order?

    weblizard,
    You can choose File > Print and then choose from the Print output options, including Slides, Slides with Notes, Outline, and Handout. You can also modify the Print outputs from the Options column on the right.
    Then on the bottom left of the Print dialog box, you will see a PDF button. Click on that button for options, including Save to PDF. This will create a nice PDF the selectable text and can include the slide for recognition and recall, as well as copy and paste into other applications.

  • How to export keywords, CS3 to CS4

    I have CS3 on my old computer, under Win XP, and CS4 on my new, under Windows 7 RC. I have about 20,000 photos, all with Bridge keywords, applied in CS3.
    The photos are on an external HD. (They're also backed up in at least 3 places.) In my old computer the photos taken in the past 5 years have keywords in Bridge. In my new computer the same photos, on the same drive, have no keywords, though earlier ones do.
    I have done all the things I'm supposed to do: trashed my Bridge prefs, deleted the entire cache, rebuilt it by reindexing, exported the keywords from the old computer to the new, exported the cache to individual folders as well as a centralized cache. Nothing works. I'm faced with a long, hard job of re-applying keywords to 10,000 or so files.
    Is there anything I can do?
    Can anyone tell me why half my photographs have retained their keywords and the other half lost them? I thought keywords were embedded in the metadata, and that the metadata survived transportation from one system to another, and over the web, and so forth. It's dismayingto learn that I spent so much time working out a system for keywords, and applying them, only to find that I've got to do it all again.
    I don't think it's anything to do with Windows 7 RC, which seems stable and well-behaved.
    Mary

    Curt
    >Just to be clear CS4 you see some, but not all keywords, or in CS4 you see no keywords?<
    I've made more sense of the problem. It's to do with Olympus Raw files - .orf. I've been shooting in Olympus camera raw since 2004.
    My workflow is: import the raw files into Bridge via a card reader; rename them in Bridge as [filename].ORF, apply keywords, edit them in Adobe Camera Raw, save them as [filename].PSD (or sometimes .TIF or .JPG), move the PSDs to a working folder, edit them in Photoshop, and finally move them to a 'Finals' folder.
    In Bridge CS3, in my old computer, I can see all keywords for ORF files. I can also see all keywords for the working and final PSDs, TIFs and JPGs.
    In Bridge CS4, in my new computer, I cannot see any keywords for ORF files, or for the working and final PSDs, etc.
    I can only see keywords for files which started life as TIFs - photos scanned with my negative scanner or flatbed scanner.
    This is also true in both Bridge CS3 and Bridge CS4 in my new laptop, which is running XP Pro. I could see the keywords in my old laptop, but not in my new one.
    >If you right click on file info in Bridge do you have the keyword listed in keyword box?  Do the same with Windows Explorer and see if keyword is listed in Properties/details.<
    'Keyword' isn't listed in Windows Explorer, though everything else under the sun is.
    The keywords are listed if I right click in Bridge CS3 on a file in my old computer. And if I click on Advanced, and expand the categories, e.g. XMP or Dublin Core Props, I get a heading 'xap:Keywords (bag container)', and a list of all the keywords attached to the file.
    But the same file in CS3 in the laptop, or CS4 in laptop or new computer, has no keywords in Advanced.
    I've had a quick look on the web for topics connected with Olympus camera raw/orf/losing keywords, but so far haven't found anything.
    Mary

  • How to export one slide to image

    Hi everyone,
    I use keynote 6 and I tried to export one of my slide to an image as a .jpg file.
    But it export all of my slides no matter what start page number and end page number I set.
    Is there a bug or may I use the wrong ways to do it?

    I asked this question a few days ago and I haven't had any answers... 72 views though so I imagine we're certainly not alone.

  • CS4-Exporting Keywords and other image data

    I've been spending quite a bit of time going through my very large image library assigning keywords, filters etc to the images and am surprised to find there doesn't seem to be any file I can backup to preserve all this data.
    Next month I will be buying a new Windows 7 system and am hoping all this time I've put in will not be wasted when I transfer CS4 to the new system.
    Is all the data (keywords, filters etc) somehow embedded into the images themselves or do I need to back up a file?
    I'd really appreciate any help with this.
    pg

    Pg,
    Here is my experience with Bridge in its various guises.
    I started with Photoshop 5 entering metadata into my digital collection.  I then progressed to PS 6 and 7.  Up to this point I had to do it all by hand.
    After purchasing the full CS2 package I fell into love with Bridge as I could now setup templates.  When managing tens of thousands of files templates made my job a whole lot easier.  Bridge CS2 had no problems reading the metadata from my Photoshop files with metadata embedded.
    After earlier this year upgrading to CS4 I had no problem viewing and manipulating my metadata.  Since the information is embedded in the photos themselves it does not matter what viewer you use.  That being said I find it disheartening that Win XP does not recognize my metadata.  I suspect that Windows creates cart files to store its info in.  Or perhaps in a file within its structure.
    So go ahead and upgrade.  As long as your metadata is embedded in the file itself you should have no problem.  Unless I was just lucky.
    Wayne

  • How to export MultiMedia,such as image,video?

    In Oracle 8i, I want to shift multimedia content into another server,.
    How can i do?

    There is one drawback to the Copy/New from Clipboard method. It does not pick up all the elements of the chart. It doesn't give you the axis titles, legend, or chart name.
    I do this:
    1) Print using the Open PDF in Preview setting
    2) In Preview, select the chart and whatever surrounding area you want to have with it.
    3) Copy
    4) New from Clipboard
    5) Save in the desired format.
    You can often skip steps 4&5 and paste directly into another document if that is where it is headed.

  • How to export in Organizer PSE 9 - Mac

    How to export one or multiple images from PSE 9 Organizer (Mac)?
    I want to set the size and export to a folder or desktop

    Thanks Barbara, I assumed it would be the same as Windows.
    http://help.adobe.com/en_US/elementsorganizer/using/WSFF2996DE-8185-4c18-B961-ED4E89458E80 _WIN.html
    Perhaps try the Editor top menu:
    File > Process Multiple Files
    Then choose an output folder on your hard drive or CD/DVD etc.
    Otherwise use iPhoto: 
    File -> Export, Kind: Original etc.

  • How to export rpt file to html in java

    Hello.
    Probably this subject appears already but after many hour searching I still canu2019t found how to export rpt file to html. To by clearly I need stream (but html will by good beginning). I won to display this html in my web application (application in IceFaces).
    I joust wno to simply example how to do this export in java.
    ps.Now I see that I should put this post in "Java Development - Crystal"

    Ok. I founded example how to export rpt file to html (but Iu2019m a little disappointed how this was made) I still need example how to export rpt file with image (or chart) to html.
    Do any one know how to do this?
    [Example how to export rpt to html|http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/d09a2df6-3d11-2c10-7fbc-9c2940cdc803]

  • How do I set the thumbnail image of my videos that export to my computer?  I'm using Premiere Elements 11 on a windows 8.1 PC 64bit.

    How do I set the thumbnail image of my videos that export to my computer?  I'm using Premiere Elements 11 on a windows 8.1 PC 64bit.
    Or how does Premiere 11 determine where to set the image for the video it is exporting? 
    I already know how to use Freeze frame and save the image to my computer by Publish+Share/Computer/ Immage.
    Thanks,
    Mike

    Mike
    This is not Adobe. Rather user to user. We are all visitors here.
    Just a bit of history....back in the days of Premiere Elements 4, you could set a "poster frame" in what was called the Project area. You did this by right clicking a blank area there and, from the drop down menu that appeared, selecting View/Preview Area, and using the poster frame feature there.
    As I said, when a video imports into Premiere Elements, the thumbnail of the import has been presenting as the first frame of the video. With this Preview area "poster frame" option, you could set the video's thumbnail in the Project area so that the first frame was another frame in the video. But, this "perk" was restricted to thumbnails of the video in Project area.
    If you exported to file with the first frame modified video, the export's thumbnail in Windows Explorer would present with other than the real first frame or the poster frame as the first frame.
    Also, in more recent versions, I have observed that the export to file does not display the real first frame of the video in Windows Explorer. Seems random, but I have not kept track.
    And, remember, at the onset I wrote
    As far as I have ever seen, Premiere Elements Windows uses the first frame of the video for its thumbnail in the program.
    I know of no way within Premiere Elements to control what the program opts to do in this matter. In some compatibility
    issues, it opts to give no image but a generic one.
    I did not say that you can expect to have the Premiere Elements' export file's thumbnail in Windows displaying with its real first frame. And, the more you get into this, depending on the versions, more details need to be added to my comment about "...first frame of video for its thumbnail in the program..."
    I would have to look into all this further to get perspective on the contributing factors.
    ATR
    Add On...The Poster Frame feature appeared in versions 4, 7, 8, and 9 by my count.

  • How can i export a series of images in different aspect ratios to the same height

    How can i export a series of images in different aspect ratios to the same height?
    I wish to make a slider callery for my website. all the images need to be 750 Pixels high, the width does not matter.  I have a mixture of square pandscap and protraite images can i do thing as one export or do i have to do it twice?  Once for long edge and once for shot edge?
    Thanks

    Yes, you can but there is a trick to it.
    In the Export Dialog under <Image Sizing> select Widdth & Height.
    Then enter 750 pixels for Height.
    Put your cursor into the Width field behind all the numbers that appear there and with the backspace key delete the numbers. If you enter "0" it will not accept that. But it accepts when you just delete the field for Width with the backspace key. The Width field will now be just blank.
    When you then export all image will  have a height of 750 pixels and the width will fall variously according to thne height / width ratio.
    Or alternatively you can enter 7.5" for height at a resolution of 100 ppi.

Maybe you are looking for