Re : How to find the Account Group for a Customer
hi
i know the Sale Area ( Sales Org,Dist Channel & Division), Company code but when i go to XD01 TO create a Customer it is asking for a Account Group.My Question is how to find the Account Group
& is there any link between Sales Area and the Account Group?
Regards
Hi murali,
Account group makes the fields in the customer master data as
1. suppress
2.req. entry
3. opt. entry
4.display
the above 4 are the radio buttons available.
Before u create the customer master in XD01.
you must gothrough the following paths to create xd01
Img->Fin.Accouting->AccountRec & Account Payable->Master data ->prepare for creating customer master data
In the above path
I. define account groups
In this you cretae your own account group
II. create number ranges for customer accounts
In this maintain any number range
III.Assign number ranges to customer account group
in this Assign the number range here.
Now go for XD01
select the account group you created.
Give the customer number,this number must be in the range that u made in the above II point.
Similar Messages
-
How to find a/c group for a customer
hi evdrybody,
how to find a/c group of a customer in va02
i tried in extras a/c group ifo but there i am getting all a/c group data. but i need only a a/c group which created with this customer
thanks
kranthiDear Kranthi
Go to XD03, give the customer code and enter. Now select "Extras - Administrative Data".
Thanks
G. Lakshmipathi -
How to change the account group of a customer master?
Would like to change Ship-to's to Sold-to's. I know the transaction XD07, but when trying to promote a SH to SP, I receive the error
The planned change is not allowed as the following field groups would be masked by the new account group.
Below the error the table displays Group Name PO Box City and Address.
How do i bypass this and successfully change the ship-to to a sold-to?Hi ,
Chek out ur new account group for Sold to party ,whether all the fields in address tab is marked either optional /required. It should not be in display /supress mode then only u can successfully change ur SH account to SP account.
I think , Number ranges should be same.
if itz not da same number range system will give the message ,but it will allow to change the account group.
As I successfully worked in this issue earlier.
As we all know, we only change the account group from lower to heigher,
ie. sh,bp,py to SP only not viceversa.
*rewards if it helps -
How to know the account group of an customer?
as title, thnaks for your help.
Hi
To get account group of a customer, please go to XD03/ XD02, then go to extra, administrative data from menu bar. You will get account group maintained for the particular customer.
Thanks
Chandra -
How to find out the account group information in customer master record?
how to find out the account group information in customer master record?
in which tab? thanks in advanceHi
Go to XD02 and select the Extras from the main menu , you will find Account group info -> click on the No.ranges.
reward if it helps
SR -
Find out Account Group for already created customer
Hi,
How do i find out Account Group for already created customer?
Is there any Tcode to find that?
Thanks in advance.
SwethaHii
Please check it in XD03 got to sales area tab under billing document tab u will find the account assignment group. -
How to find the workflow admins for all costcenters ?
Dear SRM gurus
We are using Classic scenario with N th step workflow with BADI.
we have a requirement.
How to find the workflow admins for the particular costcenters.
we used HRV1222A where ATTRIB EQ <Z attribute>(This is our own attribute to group all the costcenters)
used table HRP1001 to find the Admins but results are not correct because it is not showing my user id(I have all authorisations).
Is there anyway to find all the admins for a cost center(users are more than 7000+)
can anybody send work flow related presentations or cookbook
Thanks in Advance.
srinuhi
I have not received any thing.Please send again
[email protected]
[email protected] -
How to find the Acoount Group used while creating the customer master data.
Hi,
I am in xd03 mode displaying the customer master data. I want to know the ACCOUNT GROUP which was used while create this customer. How can i find it? Can any one tell me the process to find the account group?
Thanks in advance.Enter the customer number in XD03 and click enter. Once the screen displays the customer name go to dropdown extras--> Administrative Data. This will give you the account group and the creation date of the customer. The same is stored in KNA1- KTOKD.
Thanks
Indranil -
How to find the BTE event for FBCJ transaction code
Hi All,
i need to find the BTE event for Finance related transaction codes.i checked in the SWEL transaction code, didnt find any event triggered and the standard BADI doesnt suite my requirement.The transaction code which i tried is FBCJ.can anyone help me how to find the BTE event for the above mentioned transaction.
Thanks in Advance,
lokesh kumar.KHello Lokesh,
The following is one of the process of finding a BTE and implementing it.
(1)Goto transction FIBF .Execute it with Attribute type = 'A'. Then in the menubar Environment->Info System (P/S )
Go through the list of BTE's available with the description available beside.
(2)Select the BTE you want to implement.
(3)Press button Sample function module
(4)This brings you to SE37 - Copy the sample function module to a Z-function module (First create a new function group for the function module) . Note: The name of the Z-functionmodule is not important
(5)Edit the code in the new function module
(6)Go back to transaction FIBF - Menu Settings->Products -> Of a customer and create a new product whicj identifies the new product . Remember to mark the Active field.
(7)Go back to FIBF menu Settings->P/S function modules->of a customer - Create an entry that links the BTE and Product with the new function module
Hope this will help.
Regards,
Samson -
How to find the user exit for a screen..
Hi,
plz help me how to find the user exit for a screen..?
Regards
AnbuHi,
check this program this will give you the list of user-exit and BADI for the perticular Tcode.
REPORT zuserexit_badi.
TABLES : tstc,
tadir,
modsapt,
modact,
trdir,
tfdir,
enlfdir,
sxs_attrt ,
tstct.
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
PARAMETERS : p_tcode LIKE tstc-tcode,
p_pgmna LIKE tstc-pgmna .
DATA wa_tadir TYPE tadir.
START-OF-SELECTION.
IF NOT p_tcode IS INITIAL.
SELECT SINGLE * FROM tstc WHERE tcode EQ p_tcode.
ELSEIF NOT p_pgmna IS INITIAL.
tstc-pgmna = p_pgmna.
ENDIF.
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name EQ enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
SELECT * FROM tadir INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object IN ('SMOD', 'SXSD')
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(105) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
SORT jtab BY object.
DATA : wf_txt(60) TYPE c,
wf_smod TYPE i ,
wf_badi TYPE i ,
wf_object2(30) TYPE c.
CLEAR : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT jtab INTO wa_tadir.
AT FIRST.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Enhancement/ Business Add-in',
41 sy-vline ,
42 'Description',
105 sy-vline.
WRITE:/(105) sy-uline.
ENDAT.
CLEAR wf_txt.
AT NEW object.
IF wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
ELSEIF wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
ENDIF.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 sy-vline,
2 wf_object2,
105 sy-vline.
ENDAT.
CASE wa_tadir-object.
WHEN 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE modtext INTO wf_txt
FROM modsapt
WHERE sprsl = sy-langu
AND name = wa_tadir-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WHEN 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
SELECT SINGLE text INTO wf_txt
FROM sxs_attrt
WHERE sprsl = sy-langu
AND exit_name = wa_tadir-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
ENDCASE.
WRITE:/1 sy-vline,
2 wa_tadir-obj_name HOTSPOT ON,
41 sy-vline ,
42 wf_txt,
105 sy-vline.
AT END OF object.
WRITE : /(105) sy-uline.
ENDAT.
ENDLOOP.
WRITE:/(105) sy-uline.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
DATA : wf_object TYPE tadir-object.
CLEAR wf_object.
GET CURSOR FIELD field1.
CHECK field1(8) EQ 'WA_TADIR'.
READ TABLE jtab WITH KEY obj_name = sy-lisel+1(20).
MOVE jtab-object TO wf_object.
CASE wf_object.
WHEN 'SMOD'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
WHEN 'SXSD'.
SET PARAMETER ID 'EXN' FIELD sy-lisel+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.
Reagards,
Bharat. -
How to find the text id for the text in the sales order
Hi all,
How to find the text id for the item-text in the sales order?
There are different Text available in the sales order under item like Warehouse instruction, CSR instruction...
I want to know the corresponding Text id for the text ELECTRONIC ORDER COMMENT.
Table TTXID contains the validation of the Text id.
Please help me in knowing the way to identify the text-id from the text list..
Thanks foryour help
Suresh KumarU can fetch the texts for the items using
Read_text.
Example:
g_f_tdname = xvttp-vbeln.
g_f_obj = p_obj.
g_f_langu = 'DE'.
REFRESH g_t_lines.
CLEAR g_t_lines.
CALL FUNCTION 'READ_TEXT'
EXPORTING
id = p_var
language = g_f_langu
name = g_f_tdname
object = g_f_obj
TABLES
lines = g_t_lines
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
The Required fields are,
Text-id ,language,name,object.
Let me know if you further require help.
Regards -
Where and how to find the storage locatation for the consignment stock
where and how to find the storage locatation for the consignment stock (customer stock ) for more than one storage location .
table :msku
material no - werks - batch
xxx sg11 - 200352ac
table : mchb
material no - werks -lgort - batch
xxx sg11 sg10 200352ac
xxx sg11 gs11 200352ac
note : each stock location having same batch no in different storage and my question how to find which link for msku to mchb .Hi,
Try the table MARD: Storage Location Data for Material, where in the field LABST will give the stock field, against a given material/plant/Storage Loc.
Regards,
JLN -
How to find the search help for the parameters stmt in a report
hi
how to find the search help for the parameters stmt in a report , that is using which addition to the parameters statementI am not sure if I understood the question,but if you meant how to attach a search help to parameter for which a default search help is not available,you can do that by using addition "Matchcode Object"
Parameter: a type i matchcode object 'Search Help Name'
Search Help name should be in single quotes.
Regards,
Anubhav.
P.S: Award Points if useful. -
How to find the creation date for a released requests..
Hi friends ,
In se09 tcode , we a date which represents the last changed date .. Now , for a particular Released request i want to find out the Creation date for it . How can i find it . I checked the tables like E070create there also we have requests that not released yet , i have also checked se03 and other tcode and a fn mo dules like TR_READ_GLOBAL_INFO_OF_REQUEST .
So how to find the creation date for a released requests. Iam waiting for ur inputs..
Thanks in advance..hi,
Did u found the way to get the request creation date?
I also need the same information.
This needed for audit purpose........so it is must.
Please help me in this.
Best regards,
vinod -
How to change the account setting for App Store
My last question wasn't so clear, so I would like to post again. I want to know how to change the account setting for App Store. I have changed in the Settings but it doesn't reflect in App Store.
Thanks,once you sign out just click sign in and put the new email address in the "Username" field and your correct password then click OK
it will look like it is doing nothing but give it time and it will sign you in with the new username.
is it possible you have multiple itunes accounts?
when you changed your itunes account from your me.com to your gmail.com address did you change it within the itunes Edit Account Info ('Store' menu then select 'View My Account', then sign in , select edit account info) or did you just create another itunes account?
be well
Maybe you are looking for
-
How can I send an email from Bridge CC?
The eh question says it all!
-
C++ do not support JNi && how to return the array from jni?
hi, 1.. I have created the Cpp file to implemement the native method but it seems that the native method can not complie rightly , it tells me follows error C2819: type 'JNIEnv_' does not have an overloaded member 'operator ->' c:\program files\micro
-
When I click on a photo in Facebook app on iPhone 5 to save it to camera roll it doesn't work like it did in IOS 5. Is there a way round this? It's do annoying.
-
Hi All, I am brand new to OSB, i was giving a schema to develop a web service with in OSB. How do i start? what are the steps? Please help its urgent.
-
I have installed German, Chinese(Simplified) and Chinese(Traditional) languages by running langinst.csh on NT. When I login to the portal and choose the Chinese language using the Set Language Portlet, the Chinese characters all appeared as inverted