Re: How to install any boot manager on Vista at Satellite A300

I want to install second OS on my A300 but can't make any boot manager work with Vista.
IBM os/2 bootmanager can start Vista, but Vista say that it can't execute winload and hang up, Acronis bootmanager does not see any OS at Vista NTFS disk...

You need to do a complete restore.
Ive been working on my own and that was the only way, first go into bios (restart computer push esc right after you restart) go into BIOS, now go to boot, select your hard drive and disable it.
Next restart computer, your restore disk should start may take a minute, let it run until it says you have an error, now restart computer, go back into BIOS turn hard drive on, restart one last time and it should finish takes about an hour or so, any way what I'm saying is 8 out of ten times it's this if you ask a tech they will have you buying thing you do not need because they haven't figured out not everyone is an idiot and fall for their fake remedy for the almighty dollar way to BUSH it up.

Similar Messages

Re: How to install Windows Xp on pre-Vista laptop Satellite A300?

Hello
I'm now facing a problem when i try to install windows xp on my pre- Windows Vista laptop operating system ..
A300 when i input windows xp disc and boot from cd/dvd .... there is an error tell me that : you have viruses on your hard disc or scan it from viruses , or something like that but i test the same OS disc into other pc and its working also i have Gdata IS 2012, and i think its restriction from toshiba or i dont know , but its very important to install windows xp ...
i hope you help how to install windows xp on my laptop .
Regards
John

Hello John
It is not easy to understand the whole situation, especially this part with viruses.
In my opinion WXP installation should not be problematic.
What you need is WXP SP2 or SP3 disc and SATA driver. Without SATA driver HDD will not be visible for WXP.
More about that you can read on http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=38

How to install LenovoEMC Storage Manager for Linux: Version 1.4.4.14439

An Small step by step how to install this app. I this first example it was installed on Red Hat 6 Linux
How to install LenovoEMC Storage Manager for Linux: Version 1.4.4.14439.
1 - Download it from https://lenovo-na-en.custhelp.com/app/cust_alp/p/1031,1150
2 - Change File permissions ( chmod +x setup-1.4.4.14439.bin)
3 - Now you can install so execute this sintaxis : ./setup-1.4.4.14439.bin
4 - When app installation finishes, you must do it with this file into folder installation (chmod +x LenovoEMCStorageManager)
5 - Then to open the app execute it: ./LenovoEMCStorageManager
Video Tutorial
How to install LenovoEMC Storage Manager for Linux: Version 1.4.4.14439
In This second example I installed same version on Ubuntu 13.10. Look at the end of messages of thread and you will see this steps
Install Storage Manager setup-1.4.4.14439.bin in ubuntu.
Attachments:
lenovoemcstoragemanager.jpg ‏27 KB

Hello everyone ,
I have a lenovo px4-300d, I'm on Ubuntu 13.10 64bits with Gnome 3 as GUI and I'm trying to install the LenovoEMC storage Manager but it failed :
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
Launching installer...
Graphical installers are not supported by the VM. The console mode will be used instead...
Preparing CONSOLE Mode Installation...
===============================================================================
Choose Locale...
    1- Deutsch
   ->2- English
    3- Español
    4- Français
    5- Italiano
    6- Nederlands
    7- Português (Brasil)
    8- Svenska
CHOOSE LOCALE BY NUMBER: 2
=======================================================
Installer User Interface Mode Not Supported
The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The valid UI modes identifiers are GUI, Console, and Silent.
=======================================================
Is it still aproblem with the 64 bits architecture ?
Have you find any solutions ? Thank you very much

How to install / activate 'Yard Management' and BC sets

Hi everyone
I've been asked to look into how to install/activate
'Yard Management' for business warehouse. From what I've found so far online/in SDN forums, it looks like you need to activate it under Logistics Execution in SPRO. But it's not there... so looks like I need to install the necessary 'BC sets' ??
I've found a spreadsheet for 'W70 Yard management' with some
technical names for these BC sets, like
/SMB30/LYYRD_V_B031_D70, /SMB30/T30B_V_B032_D70 etc.
Any idea what these are / whether and where you can get them
(downloadable from SAP??) what transaction you use etc???
Thanks!
Ross (Basis guy)
Edited by: Ross Armstrong on Jun 18, 2008 9:13 AM
It seems we need this on a 4.7 SAP system, whereas this other docs/installing via Best Practices seems to be for ECC5 onwards... any ideas anyone?

You should activate 0ANALYSIS_PATTERN (and all necessary objects). Use this as starting point for customizing your own template. Then use SPRO transaction RSCUSTV27 to change fields "Broadcasting" and "Ad Hoc Analysis" to your customized templates.
Activate and customize 0QUERY_TEMPLATE_BROADCAST_PDF if you need to broadcast PDF's. There's no place SPRO that I know of where you can configure this to use a custom template.
You don't need 0QUERY_TEMPLATE_BROADCASTING70. It's labeled 70 but in fact it's a 3.5 web template.

Solaris wont boot after installing Smart Boot Manager

I installed Solaris 10 today. Everything was fine, but because i have 2 WXP installations on my 2 harddrives i have to install a boot manager. I always used Smart Boot Manager because it was simple and powerful. But after that if i try to run Solaris, the Solaris Booting System starts, everything is fine (except this that it doesnt see my keyboard) but then i get an error like this:
ERROR: system/filesystem/root:default cant mount /boot
and promts to type the administrator password. I uninstalled SBM and now everything is OK. But i cant boot my 2nd WXP install.
(my HDD's:
HDD1@SATA-0: (First boot device in my BIOS)
1) WXP
2) Solaris Boot <- Active
3) Solaris
4) NTFS
HDD2@PATA-0-Master (Second boot device in my BIOS)
1) WXP <- Active
2) NTFS)
Has anyone a workaround for this problem?

That seems to be a known issue that have been for a lot of time around with some combinations of X-Fi, mobo, and GPU...
This problem doesnt have any real solution at all... if you dont have a way to config in the bios the priority of video card, like what goes first for video PCI or PCI-E, that is the only way to fix it so far.

How to install Adobe Application Manager?

How to install Adobe Application Manager? I downloaded it, but can't install.
Just purchased the CC for photographers. Have been using Photoshop since version 3.
I have been studying your support docs for several days and have no business messing around with something called, .gz files and installation logs. Totally unsuccessful "Updating" my CS6 or CS6 bridge or Extension Manager or the Adobe Support Advisor by the CC Desktop.
Have no Photoshop CS6 because I followed your CC support instructions.
Uninstalled my CS6 today so I can finish a job tomorrow. Bad decision on my part because I can't reinstall it and am unable to correct
this problem.
I was able to use CC to update LR, but am absolutely too afraid to touch it now.
I have been waiting inline for Chat also, but the numbers ahead of me are going up.
If someone in this Community forum can help me, it would be fabulous.
Thanks very much.

Uninstalled Creative Cloud.
Downloaded it again - 4th time.
Deleted a AAMDetect file from the Library/Internet Plug-ins
Downloaded and installed Adobe App Manager and an icon for it is on my Desktop
Installed Creative Cloud.
OK.
Now how do get my Photoshop CS6 back before I download Photoshop CC?
CS6 is not listed in the available Apps in the CC Desktop.
Support wait time right now is 2 hours by phone.
After sitting on Chat yesterday only to see the people "waiting ahead of me" go from 17 to 18, I gave up.
Please advise.
Thanks again.

HT3986 how to install any windows on macbook pro (early 2011) (os x mavericks)?

En: how to install any windows on macbook pro (early 2011) (os x mavericks)?
Ro: *** se instaleaza orice windows pe macbook pro (early 2011) (os x mavericks)?
Help Me Please

search
how to install windows on a macbook pro
http://support.apple.com/kb/ht3986
http://www.youtube.com/watch?v=uVfRQ0YIDUI
http://www.gadgetreview.com/2013/05/how-to-install-windows-8-on-your-macbook-pro .html
http://www.redmondpie.com/how-to-install-windows-7-on-macbook-pro-with-retina-di splay-tutorial/

How to Install SQL Enterprise Manager ?

The standard installation file which sap gives sql4sap.vbs doesnt install the Enterprise manager.
How to install SQL Enterprise Manager (ECC6+Win2003).
regards,
dev

Hi,
Server type is normally "Database Engine". You can use the Dev. Studio to connect to various other types (e.g. Reporting Services, Analysis Service etc.)
The Servername is the instance name you want to connect to. For a default instance it is your machinename, for a named instance it is Machinename\Instancename.
Authentication can be Windows Authentication if you are logged on as a local Admin. For an ABAP System only Windows Authentication is possible, for a JAVA System the SQL authentication is necessary, so that you can logon as 'sa' with the password you provided in the setup.
Regards
Clas

How to Install Analytic Workspace Manager 10.1.0.4.

Hi,
how to Install Analytic Workspace Manager 10.1.0.4.?
Many thanks before.

Thank you, we have this :
SELECT COMP_NAME, VERSION, STATUS FROM DBA_REGISTRY WHERE COMP_NAME LIKE '%OLAP%';
COMP_NAME VERSION STATUS
OLAP Analytic Workspace 10.2.0.1.0 VALID
Oracle OLAP API 10.2.0.1.0 VALID
OLAP Catalog 10.2.0.1.0 VALID
Is Analytic Workspace Manager installed ? How to know its version ?
Thank you.

How to install only catalog manager in obiee 11g client

hi,
i have obiee 11.1.1.5 sever on linux & client on windows.
since obiee 11g client does not comes with catalog manager.
how to install only catalog manager on windows machine.
Just to access catalog manager, Do i need to install fresh DB & OBIEE on windows?
thanks,

Hi,
Download Client tool below link and also via BI Presentation Administration home page
http://www.oracle.com/technetwork/middleware/bi-enterprise-edition/downloads/bus-intelligence-11g-165436.html
Note: catalog manager is present in obiee11.1.1.6.0
Thanks
Deva
Edited by: Devarasu on Oct 24, 2012 3:41 PM

How to install the Workflow Manager for 10g ?

how to install the Workflow Manager for 10g ?
where can I find the information ?

Ting,
When you install the workflow server from the 10gdb DB, it will install the workflow manager as well. Please make sure you read the Metalink note 265554.1 for known issues and tips. Make sure you give the correct information in the WFCA as mentioned in the metalink note.
Cheers,
Raja

How to install the Workflow Manager for ?

how to install the Workflow Manager for ? where can I find the information ?

Ting,
When you install the workflow server from the 10gdb DB, it will install the workflow manager as well. Please make sure you read the Metalink note 265554.1 for known issues and tips. Make sure you give the correct information in the WFCA as mentioned in the metalink note.
Cheers,
Raja

How to install the Solution Manager

Hi Gurus,
any one can help me out i want to install the Solution Manager 4 any one can help me out like what is the minimum HDD & RAM is required, and how many exports wil required this Solman. Can i download from Market place please gurus help me out.
Cheers

Download Solution Manager from
http://service.sap.com/instguides
--> Technology Components
Find the installation guide at
http://service.sap.com/instguides
--> SAP Components
--> Solution Manager
For sizing and other questions see note
1088980 - Documentation: SAP Solution Manager 4.0
Markus

How to install oracle connection manager on solaris 10

I have installed oracle application server 10.1.2 on solaris 10. How do i install oracle connection manager utility.
My end goal is to use applets/jdbc.
Thanks

Thank you Zettabyte!!
Folks, network printers should NOT BE configured like this:
lpadmin -p somequeue -s someprinter
that creates a remote style queue and puts all the I/O and processing capability on the basic LPD listener present on network printer interfaces. This will cause problems down the road, not to mention that you cannot control access, get any logging, filter content, or control banner pages.
Network printers should use any software (or PPD file) supplied by the vendor over the basic lpadmin/netstandard config.
You can install CUPS, but Oracle won't support it until it's part of the OS (S11, apparently).
The "System Administration Guide: Solaris Printing" is highly recommended for those administering printers on Solaris.

How to install Order Release Management component

Hi All,
I am running APPS R12. I want to install Order Release management component. Can any one help me how to install this component individually.
Regards
Nadir Pervez.

Check the following thread, and follow the steps outlined there. Instead of AX module, search for the product/module which you want to add:
Add AX module to my system
Re: add AX module to my system

Re: How to install any boot manager on Vista at Satellite A300

Similar Messages

Maybe you are looking for