Re: How to restore data after HDD format?

hi, folks
I need your help to restore some important data that gone after hdd formatting.
I didn't make any backup that was my mistake.
Everyone's help is appreciated.
Thanks to all.

Hi,
it's already late to say but it's always recommended to backup data on the external medias. First of all, don't touch your hard drive, I mean don't format/move partitions. Once, i had the same problem while creating acronis recovery zone on the hard drive. Something gone wrong and I lost some data that I wouldn't mind but I also had some files from webmoney system (its' virtual money that you can exchange for real one). I tried many programs like Ontrack.EasyRecovery.Professional and e.t.c. Only with Power.Data.Recovery software could restore it. note, it's not free but Google can help you

Similar Messages

How to restore data after reinstall oracle

My hard disk broke down yesterday before I awared to backup my oracle data. I could do nothing but reinstall the whole system(Windows & Oracle software).
When I finished install all softwares, I found I can't reload the old tablespace data files to new oracle environment.
Can anyone warn-heated tell me how to load the previous tablespace data files to new oracle environment? The old files for system, undo, temp (*.dbf) and user tablespaces as well as control files (*.ctl) and redo logs (redo*.log) are all intact in another hard disk.
Environment: Win2k3 Server + Oracle10g.
Appriciate any information and suggestion.

Should we assume that during the time your database existed you didn't take a single backup and were not in archive log mode?
Look into the "CREATE TABLESPACE" syntax with the REUSE keyword.
Do not be surprised if you fail. Perhaps having confronted this you will use RMAN to make daily backups. <g>

How to stored data after clicking checkbox save in database table

TYPE-pools: slis.
tables:mkpf,mseg,mard,COWB_COMP.
TYPES: BEGIN OF tp_data,
      mblnr LIKE mseg-mblnr,
     matnr LIKE mseg-matnr,
     werks LIKE mard-werks,
     lgort LIKE mard-lgort,
     lgpbe LIKE mard-lgpbe,
     charg LIKE mseg-charg,
     bwart LIKE mseg-bwart,
     budat LIKE mkpf-budat,
     menge LIKE mseg-menge,
     meins LIKE mseg-meins,
     kostl LIKE mseg-kostl,
     aufnr LIKE mseg-aufnr,
     rsnum LIKE mseg-rsnum,
     endkz like COWB_COMP-endkz,
END OF tp_data,
tp_tbl_data TYPE STANDARD TABLE OF tp_data.
*data: t_data like ztable occurs 0 with header line.
Constants
Data objects (variable declarations and definitions)
Report data to be shown.
DATA: it_data TYPE STANDARD TABLE OF tp_data.
Heading of the report.
DATA: t_heading TYPE slis_t_listheader.
========================== Selection Screen ==========================
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:smblnr FOR mseg-mblnr MODIF ID m1,
               smatnr FOR mseg-matnr MODIF ID m2,
               swerks FOR mard-werks MODIF ID m3,
               slgort FOR mard-lgort MODIF ID m4,
               slgpbe FOR mard-lgpbe MODIF ID m5,
               scharg FOR mseg-charg MODIF ID m6,
               sbwart FOR mseg-bwart MODIF ID m7,
               skostl FOR mseg-kostl MODIF ID m8,
               saufnr FOR mseg-aufnr MODIF ID m9,
               srsnum FOR mseg-rsnum MODIF ID m10.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS:pre RADIOBUTTON GROUP radi USER-COMMAND ucomm DEFAULT 'X',
           pse RADIOBUTTON GROUP radi,
           bps RADIOBUTTON GROUP radi.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETER:layout TYPE i.
SELECTION-SCREEN END OF BLOCK b3.
=========================== Event Blocks =============================
AT selection-SCREEN.
start-OF-selection.
PERFORM get_data USING it_data.
END-OF-selection.
PERFORM build_alv USING it_data t_heading.
=========================== Subroutines ==============================
*&      Form get_data
      Gets the information to be shown in the report.
FORM get_data USING t_data TYPE tp_tbl_data.
SELECT msegmblnr msegmatnr mardwerks mardlgort mardlgpbe msegcharg msegbwart mkpfbudat
    msegmenge msegmeins msegkostl msegaufnr mseg~rsnum
INTO CORRESPONDING FIELDS OF TABLE t_data
FROM mseg
JOIN mard ON mardmatnr EQ msegmatnr
               JOIN mkpf ON msegmblnr EQ mkpfmblnr
               WHERE mseg~matnr IN smatnr.
ENDFORM.                    " get_data
*&      Form build_alv
      Builds and display the ALV Grid.
FORM build_alv USING t_data TYPE tp_tbl_data
      t_heading TYPE slis_t_listheader.
ALV required data objects.
DATA: w_title   TYPE lvc_title,
        w_comm    TYPE slis_formname,
        w_status TYPE slis_formname,
        x_layout TYPE slis_layout_alv,
        t_event    TYPE slis_t_event,
        t_fieldcat TYPE slis_t_fieldcat_alv,
        t_sort     TYPE slis_t_sortinfo_alv.
REFRESH t_fieldcat.
REFRESH t_event.
REFRESH t_sort.
CLEAR x_layout.
CLEAR w_title.
Field Catalog
PERFORM set_fieldcat2 USING:
        1 'MBLNR' 'MBLNR' 'MSEG' space space space space space space space space space space space space t_fieldcat ,
        2 'MATNR' 'MATNR' 'MSEG' space space space space space space space space space space space space t_fieldcat ,
        3 'WERKS' 'WERKS' 'MARD' space space space space space space space space space space space space t_fieldcat,
        4 'LGORT' 'LGORT' 'MARD' space space space space space space space space space space space space t_fieldcat ,
        5 'LGPBE' 'LGPBE' 'MARD' space space space space space space space space space space space space t_fieldcat ,
        6 'CHARG' 'CHARG' 'MSEG' space space space space space space space space space space space space t_fieldcat ,
        7 'BWART' 'BWART' 'MSEG' space space space space space space space space space space space space t_fieldcat,
        8 'BUDAT' 'BUDAT' 'MKPF' space space space space space space space space space space space space t_fieldcat,
        9 'MENGE' 'MENGE' 'MSEG' space space space space space space space space space space space space t_fieldcat,
        10 'MEINS' 'MEINS' 'MSEG' space space space space space space space space space space space space t_fieldcat,
        11 'KOSTL' 'KOSTL' 'MSEG' space space space space space space space space space space space space t_fieldcat,
        12 'AUFNR' 'AUFNR' 'MSEG' space space space space space space space space space space space space t_fieldcat,
        13 'RSNUM' 'RSNUM' 'MSEG' space space space space space space space space space space space space t_fieldcat,
    14 'ENDKZ' 'ENDKZ' 'COWB_COMP' space space 'select' 'Select this row' 'Sel' 'Select this row' space space space 'X' 'X' space t_fieldcat.
Layout
x_layout-zebra = 'X'.
Top of page heading
PERFORM set_top_page_heading USING t_heading t_event.
Events
PERFORM set_events USING t_event.
GUI Status
w_status = ''.
User commands
w_comm   = 'USER_COMMAND'.
Order
Example
PERFORM set_order USING '<field>' 'IT_DATA' 'X' space space t_sort.
PERFORM set_order USING 'MBLNR' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELN' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELP' 'IT_DATA' 'X' space space t_sort.
Displays the ALV grid
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
    i_callback_program       = sy-repid
    it_fieldcat              = t_fieldcat
    is_layout                = x_layout
    it_sort                  = t_sort
    i_callback_pf_status_set = w_status
    i_callback_user_command = w_comm
    i_save                   = 'X'
    it_events                = t_event
    i_grid_title             = w_title
TABLES
    t_outtab                 = t_data
EXCEPTIONS
    program_error            = 1
    OTHERS                   = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " build_alv.
*&      Form set_top_page_heading
      Creates the report headings.
FORM set_top_page_heading USING t_heading TYPE slis_t_listheader
      t_events TYPE slis_t_event.
DATA: x_heading TYPE slis_listheader,
        x_event   TYPE LINE OF slis_t_event.
Report title
CLEAR t_heading[].
CLEAR x_heading.
x_heading-typ = 'H'.
x_heading-info = 'Reporte Prueba'(001).
APPEND x_heading TO t_heading.
Program name
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Program: '.
x_heading-info = sy-repid.
APPEND x_heading TO t_heading.
User who is running the report
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'User: '.
x_heading-info = sy-uname.
APPEND x_heading TO t_heading.
Date of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Date: '.
WRITE sy-datum TO x_heading-info.
APPEND x_heading TO t_heading.
Time of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Time: '.
WRITE sy-uzeit TO x_heading-info.
APPEND x_heading TO t_heading.
Top of page event
x_event-name = slis_ev_top_of_page.
x_event-FORM = 'TOP_OF_PAGE'.
APPEND x_event TO t_events.
ENDFORM.
*&      Form set_events
      Sets the events for ALV.
      The TOP_OF_PAGE event is alredy being registered in
      the set_top_page_heading subroutine.
FORM set_events USING t_events TYPE slis_t_event.
DATA: x_event   TYPE LINE OF slis_t_event.
Example
clear x_event.
x_event-name = .
x_event-form = .
append x_event to t_event.
ENDFORM.
*&      Form set_order
      Adds an entry to the order table.
FORM set_order USING p_fieldname p_tabname p_up p_down p_subtot
      t_sort TYPE slis_t_sortinfo_alv.
DATA: x_sort TYPE slis_sortinfo_alv.
CLEAR x_sort.
x_sort-fieldname = p_fieldname.
x_sort-tabname   = p_tabname.
x_sort-UP = p_up.
x_sort-down = p_down.
x_sort-subtot = p_subtot.
APPEND x_sort TO t_sort.
ENDFORM.                    "set_order
*&      Form set_fieldcat2
      Adds an entry to the field catalog.
FORM set_fieldcat2 USING p_colpos p_fieldname p_ref_fieldname p_ref_tabname
      p_outputlen p_noout
      p_seltext_m p_seltext_l p_seltext_s p_reptext_ddic p_ddictxt
      p_hotspot p_showasicon p_checkbox p_edit
      p_dosum
      t_fieldcat TYPE slis_t_fieldcat_alv.
DATA: wa_fieldcat TYPE slis_fieldcat_alv.
CLEAR wa_fieldcat.
General settings
wa_fieldcat-fieldname = p_fieldname.
wa_fieldcat-col_pos = p_colpos.
wa_fieldcat-no_out = p_noout.
wa_fieldcat-HOTSPOT = p_hotspot.
wa_fieldcat-CHECKBOX = p_checkbox.
wa_fieldcat-ICON = p_showasicon.
wa_fieldcat-do_sum = p_dosum.
Set reference fieldname, tablenam and rollname.
If p_ref_tabname is not given, the ref_fieldname given is a data element.
If p_ref_tabname is given, the ref_fieldname given is a field of a table. In case ref_fieldname is not given, it is copied from the fieldname.
IF p_ref_tabname IS INITIAL.
    wa_fieldcat-rollname =   p_ref_fieldname.
ELSE.
    wa_fieldcat-ref_tabname = p_ref_tabname.
    IF p_ref_fieldname EQ space.
      wa_fieldcat-ref_fieldname =   wa_fieldcat-fieldname.
    ELSE.
      wa_fieldcat-ref_fieldname =   p_ref_fieldname.
    ENDIF.
ENDIF.
Set output length.
IF NOT p_outputlen IS INITIAL.
    wa_fieldcat-outputlen = p_outputlen.
ENDIF.
Set text headers.
IF NOT p_seltext_m IS INITIAL.
    wa_fieldcat-seltext_m = p_seltext_m.
ENDIF.
IF NOT p_seltext_l IS INITIAL.
    wa_fieldcat-seltext_l = p_seltext_l.
ENDIF.
IF NOT p_seltext_s IS INITIAL.
    wa_fieldcat-seltext_s = p_seltext_s.
ENDIF.
IF NOT p_reptext_ddic IS INITIAL.
    wa_fieldcat-reptext_ddic = p_reptext_ddic.
ENDIF.
IF NOT p_ddictxt IS INITIAL.
    wa_fieldcat-ddictxt = p_ddictxt.
ENDIF.
Set as editable or not.
IF p_edit IS NOT INITIAL.
    wa_fieldcat-INPUT     = 'X'.
    wa_fieldcat-EDIT     = 'X'.
ENDIF.
APPEND wa_fieldcat TO t_fieldcat.
ENDFORM.                   "set_fieldcat2
=========================== Subroutines called by ALV ================
*&      Form top_of_page
      Called on top_of_page ALV event.
      Prints the heading.
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
    i_logo             = 'XXXXX'
    it_list_commentary = t_heading.
ENDFORM.                    " alv_top_of_page
*&      Form user_command
      Called on user_command ALV event.
      Executes custom commands.
FORM user_command USING r_ucomm     LIKE sy-ucomm
      rs_selfield TYPE slis_selfield.
ENDFORM.                    "user_command
this is my code, how to store data after clicking checkbox in databasetable,
how to write that cide.
plz send me code.

hi!,
use MODIFY to update data into the data base table.
regards
anjali

How to restore data from my Time Capsule onto my new hard drive

My Macbook's hard drive had to be changed, and I'm trying to restore files from my Time Capsule onto my new hard drive, but all I see are three sparsebundle files (one for each Mac we have at home, including my computer/old hard drive). From that point I don't know what else to do. If I click on it, it opens a dialogue that says "opening volumes" and it stays on that for a while.
Does anyone know how to restore data backed up in my Time Machine from previous backups onto a new hard drive? Does it have to do with these sparsebundle files? Or, is there another way?

Hello Alexevich. Welcome to the Apple Discussions!
Does anyone know how to restore data backed up in my Time Machine from previous backups onto a new hard drive?
Check out the following Apple article: Restoring files from a Time Capsule backup

How to convert date from ccyymm format to mmddyy

hi,
How to convert date from ccyymm format to mmddyy

Please don't multipost. This question has been answered in your first post.
How to convert date to ccyymm format
Regards,
Jo

How to convert date to ccyymm format

Hi,
How to convert date to ccyymm format.
Thanks

dadivela wrote:
Re: How to convert date from ccyymm format to mmddyyI didn't inderstand. Date doesn't have any format. If you have a string in CCYYMM format, you would have to extract the YYMM from the string.
SQL> SELECT   SYSDATE,
2           TO_CHAR (SYSDATE, 'ccyymm') Date_Fm,
3           SUBSTR (TO_CHAR (SYSDATE, 'ccyymm'), 3) YYMM
4    FROM   DUAL
5 /
SYSDATE   DATE_F YYMM
08-JUN-09 210906 0906You can use this string to convert it to date. Note that since DD part of your date was not their in the resultan string, the converted date will fall back to first of the month specified.
SQL> SELECT   SYSDATE,
2           TO_CHAR (SYSDATE, 'ccyymm') Date_Fm,
3           SUBSTR (TO_CHAR (SYSDATE, 'ccyymm'), 3) YYMM,
4           TO_DATE (SUBSTR (TO_CHAR (SYSDATE, 'ccyymm'), 3), 'YYMM') conv_Dat
e
5    FROM   DUAL
6 /
SYSDATE   DATE_F YYMM             CONV_DATE
08-JUN-09 210906 0906             01-JUN-09
SQL>Then convert the date into the required format using TO_CHAR Function
SQL> SELECT   SYSDATE,
2           TO_CHAR (SYSDATE, 'ccyymm') Date_Fm,
3           SUBSTR (TO_CHAR (SYSDATE, 'ccyymm'), 3) YYMM,
4           TO_DATE (SUBSTR (TO_CHAR (SYSDATE, 'ccyymm'), 3),
5                   'YYMM') conv_Date,
6           TO_CHAR(TO_DATE(SUBSTR(TO_CHAR (SYSDATE, 'ccyymm'),3),
7                   'YYMM'), 'MMDDYY') New_Format
8    FROM   DUAL
9 /
SYSDATE   DATE_F YYMM             CONV_DATE NEW_FO
08-JUN-09 210906 0906             01-JUN-09 060109
SQL>Hope this helps.
Regarads,
Jo

How Adobe gets DATE and its format?

Hello,
I am getting current (todays) date by using below JS in some flds, and by using below FormCalc for some flds into my_form,
JS:
var currentTime = new Date()
Form Calc:
$.rawValue = num2date(date(), DateFmt(MM/DD/YYYY))
But, i dont have much idea that how adobe is getting this date? For my company this is the very first form, hence they are asking me how adobe gets date and its format whether,
1) From local IP/Interner provider address's date, format?
2) or user PC/laptop's LOCAL settings date, format? if so, for example, if Germany user (Laptop settings) has a DD.MM.YYYY configured, if this user comes to US on a busines trip and if that user opens the form, then how the date looks like for this user? as per user laptop settings DD.MM.YYYY or local internat provider date format MM//DD//YYYY?
Thank you

Hi,
the date() function returns the number of days since 01.01.1900 for the local date of the current system (related to the system clock of the OS).
If you travel from Germany to the US but don't update your date/time settings, then it returns the same date in the US as in Germany.
You can check the behavior by changing your local date/time setting or the timezones.

How to read data after select multiple record by checkbox,

hi experts
i m using simple report with check box , and itab whcih contain records
how to read data after select multiple record by checkbox,
thanks

Hi Prashant,
   Try using this logic.This Code displays the list with check boxes. When you check a checkbox and press a button say 'Select All' or 'De Select all' or 'Display'. It will read the data of those records.
DATA :
fs_flight TYPE type_s_flight,
fs_flight1 TYPE type_s_flight1.
* Internal tables to hold Flight Details                             *
DATA :
t_flight LIKE
STANDARD TABLE
        OF fs_flight,
t_flight1 LIKE
   STANDARD TABLE
         OF fs_flight1.
SET PF-STATUS 'SELECT' .
PERFORM selection.
PERFORM displaybasic .
*                      AT USER COMMAND EVENT                          *
AT USER-COMMAND.
PERFORM selectall .
*&      Form SELECTION
*      Select query to reteive data from SPFLI table
* There are no interface parameters to be passed to this subroutine.
FORM selection .
SELECT carrid                       " Airline Code
          connid                       " Flight Connection Number
    FROM spfli
    INTO TABLE t_flight.
DESCRIBE TABLE t_flight LINES w_lines .
ENDFORM.                               " SELECTION
*&      Form DISPLAYBASIC
*      Display the basic list with SPFLI data
* There are no interface parameters to be passed to this subroutine.
FORM displaybasic .
LOOP AT t_flight INTO fs_flight.
    WRITE :
         w_check AS CHECKBOX,
         w_mark,
         fs_flight-carrid UNDER text-001,
         fs_flight-connid UNDER text-002.
ENDLOOP.                             " LOOP AT T_FLIGHT..
CLEAR fs_flight-carrid .
CLEAR fs_flight-connid.
ENDFORM.                               " DISPLAYBASIC
*&      Form SELECTALL
*      To check all the checkboxes with a 'selectall' push button
* There are no interface parameters to be passed to this subroutine.
FORM selectall .
CASE sy-ucomm.
    WHEN 'SELECT_ALL'.
      w_check = 'X'.
      w_line = 4 .
      DO w_lines TIMES.
        READ LINE w_line .
        MODIFY LINE w_line FIELD VALUE w_check .
        ADD 1 TO w_line .
      ENDDO.                           " DO W_LINES TIMES
      CLEAR w_line.
    WHEN 'DESELECTAL'.
      w_check = space.
      w_line = 4 .
      DO w_lines TIMES.
        READ LINE w_line FIELD VALUE w_mark .
        IF w_mark = space .
          MODIFY LINE w_line FIELD VALUE w_check .
        ENDIF.                         " IF W_MARK = SPACE
        ADD 1 TO w_line .
      ENDDO.                           " DO W_LINES TIMES
    WHEN 'DISPLAY'.
IF sy-lilli BETWEEN 4 AND w_lines .
    DO w_lines TIMES.
      READ LINE w_num FIELD VALUE w_check INTO w_check
                                 fs_flight-carrid INTO fs_flight-carrid
                                 fs_flight-connid INTO fs_flight-connid.
      IF sy-subrc = 0.
        IF w_check = 'X'
          SELECT carrid
                  connid
                  fldate               " Flight date
                  seatsmax             " Maximum capacity in economy
                  seatsocc             " Occupied seats in economy class
            FROM sflight
            INTO TABLE t_flight1
           WHERE carrid = fs_flight-carrid
             AND connid = fs_flight-connid.
          LOOP AT t_flight1 INTO fs_flight1.
            WRITE :
              / fs_flight-carrid UNDER text-001,
                fs_flight-connid UNDER text-002,
                fs_flight1-fldate UNDER text-007,
                fs_flight1-seatsmax UNDER text-008,
                fs_flight1-seatsocc UNDER text-009.
          ENDLOOP.
        ENDIF.                         " IF SY-SUBRC = 0
      ENDIF.                           " IF W_CHECK = 'X'.
      ADD 1 TO w_num.
    ENDDO.                             " DO W_LINES TIMES
    CLEAR w_check.
    w_num = 0.
ELSE .
    MESSAGE 'INVALID CURSOR POSITION ' TYPE 'E' .
ENDIF.                               " IF SY-LILLI BETWEEN..
ENDCASE.                             " CASE SY-UCOMM
ENDFORM.                               " SELECTALL
Much Regards,
Amuktha.

How to restore 5c after lost passcode

how to restore 5c after lost passcode?

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software.

HT1766 how to restore data file from back up on iPhone 5 docs to go

how to restore data file from back up on iPhone 5 docs to go

If it backed up the lock file, then Lightroom was open when Time Machine ran, and the backup therefore may be corrupted. You could try restoring that backup (without overwriting your week ago version) and see if it'll open. If it does, you're off and running. What methods have you tried?

How to restore Data from past iCloud backup? I lost my spreadsheets from Numbers, need help.

How to restore Data from past iCloud backup?
Is there a way where i can retrieve my spreadsheets from the past iCloud backup of numbers?

Your Numbers documents were synced with iCloud so they would be stored on the server rather than being included in the backup. If you were signed into your iCloud account on a Mac that you were backing up with Time Machine, you could restore them from your Time Machine backup.

How to restore data from iCloud

How to restore data to the replacement iPhone 4S from iCloud backup? New iPhone is version of iOS 7.03 but alll backups are in version iOS 7.1.1

You'll need to update your phone first to 7.1.1, then you'll be able to do a full restore from your backup.

How to Download Data in Excel Formate

Hi Friend,
I have one doubt on webdynpro with java. Req: For download data in Excel formate.
I will follow this http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/3596. [original link is broken] [original link is broken] [original link is broken]
i am doing upto 3rd Step here.. Up to Step 3 i am doing after 3rd Step I am not understand. Could u explain 4step.
1. I have to place TableUtilities.java
2. I have Create tableutilities value attribute
3. in Modify view--- This is -SecondView -
This is having Table UI Element.
if(firstTime)
IWDTextView tv = (IWDTextView)view.getElement("total");
wdContext.currentContextElement().setTableutility(new TableUtilities(wdContext.nodeDepartments()));
//Returns attribute info of a dynamically created attribute which can be bound to the UI element neeed.
tv.bindText(wdContext.currentContextElement().getTableutility().CalculateSum("Departments","NoOfPeople"));
4. Creating an Excel File
How to Create Excel File here can u explain
I am not understand this 4th step. Pls give me Breef Explanation. How to write this code...here...
Regards
Vijay Kalluri
Edited by: KalluriVijay on May 4, 2010 8:00 PM
Edited by: KalluriVijay on May 4, 2010 8:02 PM

Hi Vijay,
Please open Microsoft Excel from your system and then create some entries (ex. having 3 columns and 3 rows). Save this file to some location in your system. Later you will need to give the location path of this saved file when uploading it from your web dynpro application.
Creating of an Excel file (i.e the 4th step) is no where related to Web Dynpro and NWDS.
Hope this helps!
Regards,
Kishan

How to Restore Data.

Hi
I have truncated all the data of my all the tables accidentally. I Have rman backup of previous day. And the deletion occurred at 9:15am. I want to go back at 9:10 am. My database is in archive mode.
How can I restore data until 9.10 am ? Any body explains me the rman command..
Arif .

Set the NLS parameters at shell prompt:
NLS_LANG=american; export NLS_LANG
NLS_DATE_FORMAT='Mon DD YYYY HH24:MI:SS'; export NLS_DATE_FORMAT
At rman prompt do the following:
(Change the channel to disk if restoring from disk media instead of tapes)
connect target /               -- Connection to the target database
connect rcvcat rman/rman@rcat          -- Connection to the recovery catalog database
shutdown immediate;               -- Shutdown the target database for point-in-time recovery
startup mount;                    -- Mount the target database
run
set until time 'Dec 20 2004 9:10:00';     -- Set the time to which the database should be recovered
allocate channel ch1 type 'sbt_tape';     -- Allocate channels
restore database;               -- Restore the database from backup
recover database;               -- Recover the database by applying archivelogs
release channel ch1;               -- Release channels
alter database open resetlogs ;          -- Open the database with resetlogs after successful                          recovery.

How to restore data files from a purchased app that isn't working

I recently had to reset my iPad after an ios7 problem with hyperlinks. The reset fixed the hyperlink problem but now I can't open excel or word files created in a purchased application, productivity suite. When I click on the file, it starts to open then switches back to the app icon. Tried deleting and reinstalling the app and now all the files are gone from my iPad. I backed up my iPad to my desktop before deleting the app but can't figure out how to restore just the files I need.

You should be able to mount the partition once you've loaded up the live CD. Just figure out which one it is by using
fdisk -l
then mount it to /mnt or wherever you want it.
As for moving/saving them, I'm not entirely sure how to get them onto an external server. You might have to mount another partition in order to install any apps that you need to connect to an external server, but wait for someone who really knows to answer before you try it. If you're only talking about 4 or 5 MB, I would just mount a USB stick and dump them on there.
Last edited by Xyne (2008-09-28 03:38:02)

Re: How to restore data after HDD format?

Similar Messages

Maybe you are looking for