Re: How to see transfer structure in sap r/3 system

Hi All,
In generic extraction I have created extract structure ,in the extract structure I have 6 fields but I am trasferring only 4 fields to the BW system ,So it will creates transfer structure in BW System with the 4 fields but when the Transfer structure in sap r/3 generates and how can see the transfer structure in sap r/3 system.I will give full points if i get the correct answer.
Regards,
Venkat

Hi ,
Data source = extract structure in r/3 system + transfer structure in r/3 system + transfer structure in bw system .
for exmpale you try to extract the following fields
1) vbeln
2) erdat
3) ernam
4)netwr
5)waerk from vbak table but you decided to trasfer only 4 fields expect the erdat in that case
extract structure contains all 5 fields and transfer structure contains 4 fields in BW system expect erdat field,
As far as my knowledge is concern when replicate the data source in bw system and activate the infosource at that time
it will create the transfer structure in r/3 system but I dont know how to see the transfer structure in r/3 system,
please help me in this regard.
Regards,
Venkat

Similar Messages

How to extract Inventory data from SAP R/3 system

Hi friends How to extract Inventory data from SAP R/3 system? What are report we may expect from the Inventory?

Hi,
Inventory management
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how%20to%20handle%20inventory%20management%20scenarios.pdf
How to Handle Inventory Management Scenarios in BW (NW2004)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Loading of Cube
ref.to page 18 in "Upgrade and Migration Aspects for BI in SAP NetWeaver 2004s" paper
http://www.sapfinug.fi/downloads/2007/bi02/BI_upgrade_migration.pdf
Non-Cumulative Values / Stock Handling
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/93ed1695-0501-0010-b7a9-d4cc4ef26d31
Non-Cumulatives
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62ebe07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62f8e07211d2acb80000e829fbfe/frameset.htm
Here you will find all the Inventory Management BI Contents:
http://help.sap.com/saphelp_nw70/helpdata/en/fb/64073c52619459e10000000a114084/frameset.htm
2LIS_03_BX- Initial Stock/Material stock
2LIS_03_BF - Material movements
2LIS_03_UM - Revaluations/Find the price of the stock
The first DataSource (2LIS_03_BX) is used to extract an opening stock balance on a
detailed level (material, plant, storage location and so on). At this moment, the opening
stock is the operative stock in the source system. "At this moment" is the point in time at
which the statistical setup ran for DataSource 2LIS_03_BX. (This is because no
documents are to be posted during this run and so the stock does not change during this
run, as we will see below). It is not possible to choose a key date freely.
The second DataSource (2LIS_03_BF) is used to extract the material movements into
the BW system. This DataSource provides the data as material documents (MCMSEG
structure).
The third of the above DataSources (2LIS_03_UM) contains data from valuated
revaluations in Financial Accounting (document BSEG). This data is required to update
valuated stock changes for the calculated stock balance in the BW. This information is
not required in many situations as it is often only the quantities that are of importance.
This DataSource only describes financial accounting processes, not logistical ones. In
other words, only the stock value is changed here, no changes are made to the
quantities. Everything that is subsequently mentioned here about the upload sequence
and compression regarding DataSource 2LIS_03_BF also applies to this DataSource.
This means a detailed description is not required for the revaluation DataSource.
http://help.sap.com/saphelp_bw32/helpdata/en/05/c69480c357354a8846cc61f7b6e085/content.htm
http://help.sap.com/saphelp_bw33/helpdata/en/ed/16c29a27db6e4d81a015be8673eb80/content.htm
These are the standard data sources used for Inventory extraction.
Hope this helps.
Thanks,
JituK

How to creat purchase register in SAP r/3 system?

Dear All,
Please tell me how to creat purchase register in sap R/3 system.

HI
I think there is no standard functionality in sap u need to develop with abaper help with proper logic
if it is for venijula s_alr_87009936 try this t.code
Thanks & Regards
Phaneendra
Edited by: phaneendra Reddy on Jun 12, 2009 9:24 AM

How to load master data from SAP R/3 system like Customer master...........

How to load master data from SAP R/3 system like Customer master, materioal master , vendor master.............

Hi Bramha,
Check ...........
Re: master data loading in BI 7.0
/message/4708129#4708129 [original link is broken]
Re: Master data loading.
Regards,
Vijay.

How XI can transfer msgs between ERP to J2EE systems??

I have a doubt...wat are the responsibilities of a XI developer for system handling the messages between ERP to J2EE systems....If possible give me any link..so that i can read...
And can any one explain the entire scenario how XI can transfer msgs between ERP to J2EE systems...

To make XI use appropriate WebSphere's libraries for connecting to it's JMS
which library file i want to use for this senarios. plz any body help me
We have WebSphere's lib catalog, but do not know which jar's we have to upload in .sda file
The adapter tries to send the msg bot doesn't find recuired classes
Plz send me info ont this to my mail id [email protected]

Impact of Cost component structure on PA Transfer structure in SAP

Hi All,
We were using a single Operating concern and Controlling area for existing company codes. Now, we got a new company to be created all together a new company with the same chart of accounts.
1. We have created Operating concern, COA, Company code..... and then completed the PA Transfer structure of FI-MM in KEI1
2. I have created a new Costing variant in OKKN
3. I have created the Cost component structure in OKTZ and assigned the new company code to it.
When i go back and checked the PA Transfer structure for FI-MM, i see everything showing as blank.
I have no idea the entire config got deleted.
Do you have any idea how it happens and why it happens please?
Also, will there be any relation b/n OKTZ and KEI1 and sequence to customize?
Hope you understand my query.
Appreciate your early response.
Thanks,
Narasimhulu

Hi Ravi,
Thanks for your response.
I have created the FI-MM PA transfer structure for the new Controlling area. But after completing the Cost component structure and came back to check the PA Transfer structure, i was surprised since everything to deleted.
I have no idea if we need to follow a sequence while doing these two activities (KEI1 and OKTZ).
Thanks,
Narasimhulu

Regarding how to create organization structure in sap workflow

hi Guru's
i am new for wokflow i dont no how to create organization structure.
pl any body help me
regards
vijay

http://help.sap.com/saphelp_erp2005/helpdata/ru/05/dfba3692dc635ce10000009b38f839/frameset.htm

How to upload Organisation structure into SAP HR. Version 3.1I.

Hi Experts,
We have to upload Organisation structure into SAP HR.We are using Version 3.1I.
Can any body please tell me how to do that.
Itr'sa important as in version 3.1 i we cannot use LSMW or eCATT.
Thanks and regards
Rajeev Chhabra

Hi Rajeev,
SAP Best Practices provides load tools that should be valid for 3.1 since the data structure hasn't changed much. You can also use delivered program RHALTD00. I'm not sure if plain old CATTs were around in 3.1, but those would work as well.
Good luck,
Sharon

How to upload the data into SAP R/3 System

I have a scenario to upload the flat file data into SAP R/3 System.
I will describe my complete scenario here so that it will be better understanding for you to suggest the solution.
The segments that relevant for the upload of customer master data, namely
HD : Header Segment
PF : Partner Function Segment
OP : Output Segment
TX : Tax Segment
CR : Credit Segment
CT : Customer Text Segment

I think you can achieve this with IDOC creation. If it is so follow the steps below.
Basic Type:
Basic IDoc type defines the structure and format of the business document that is to be exchanged between two systems.
Segments:
Segments form the basic building blocks of an IDoc type and are used to store the actual datta. A segment type is the name of a segment and is independent of the SAP elease. A segment definition is the release-specific name of a segment.
Steps in creating Segments:
T.Code WE31
Enter the name for your segment type and click on the create icon.
Type the Short text.
Enter the variable names and data elements.
Save and Go back.
Go to Edit -> Set Release.
Repeat the steps to create more segments.
IDOC TYPE:
Business data is exchanged with an external system using the IDoc Interface.
IDoc types (Special Structures) An IDoc type is defined through its permitted segments. Segments can be dependent on each other (parent and child segments). The IDoc interface can check for each IDoc whether thhe segments contained are compatible with thhe definitiion of its type. This systax check is activated or deactivated in the Partner Profiles.
Steps in creating IDoc Type:
T.Code WE30 to create IDoc Type.
Enter the Object Name, Select Basic Type and click Create Icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDoc name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press enter
The system transfers the name of the segment type to the IDoc editor.
Follow these steps to add more number of segments to Parent or as Parent-child relation.
Save it and go back.
Go to Edit -> Set Release.
Message Type:
Steps in Creating Message Type:
T.Code WE81.
change the details from Display mode to Change mode
After selection, the system will give this message "The table is cross client (See help for further info)". Press enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back.
Assign Message Type to IDoc Type:
T.Code WE82
Change the details from Display mode to change mode.
After selection, the system will give this message "The table is cross client (See help for further info)". Press enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back.
Reward Points if useful.

How to configure Mail Alerts in SAP R/3 System.

Hi,
I want to send mails to the users when alert occurs.How to configure that mail alers in R/3 system.pls send me the related information and links.
Regards,
Kiran.

HI
I think there is no standard functionality in sap u need to develop with abaper help with proper logic
if it is for venijula s_alr_87009936 try this t.code
Thanks & Regards
Phaneendra
Edited by: phaneendra Reddy on Jun 12, 2009 9:24 AM

How can i transfer the xml files between different systems?

hello
the appearance of xml enable the inter-communication between differences systems.but
i don't know how,such as following scinario:
in the client side,we use the console that is written by using c#,if i finish
filling the text boxes that are within the console,click the submit button,the
console will generate a xml format document.i want the other application that
is written by using jsp and servlet and deployed in weblogic server to receive
the xml document,then process the document.
but i don't know how i can transfer the xml files between the two applications
that is written in different languages? can i use http protocol?
thanks for any helps!

Yes, you can use the HTTP protocol as a transport for the XML message, this
is basically what the HTTP binding for SOAP does. The key is using a
packaging mechanism that different applications will understand, otherwise
only your own applications will know how to extract and process the XML
messages you send between them.
"zbcong" <[email protected]> wrote in message
news:3e68318e$[email protected]..
>
hello
the appearance of xml enable the inter-communication between differencessystems.but
i don't know how,such as following scinario:
in the client side,we use the console that is written by using c#,if ifinish
filling the text boxes that are within the console,click the submitbutton,the
console will generate a xml format document.i want the other applicationthat
is written by using jsp and servlet and deployed in weblogic server toreceive
the xml document,then process the document.
but i don't know how i can transfer the xml files between the twoapplications
that is written in different languages? can i use http protocol?
thanks for any helps!

How to see who are currently logged in the system through in EP

hi,
I want to see , who are currently logged in the system through in EP , like al08 or sm04 in r3.
Please guide me

Hi,
Portal activity reports will help you in getting all the user details who are logged on to the portal.
Portal activity reports help you which page or iview the users visited.
There may be many content in the portal. But the monitoring people mainly wants what content people are mostly visiting. This can help them to update that content frequently. Not only that the content people are not visiting can be made more attractive or it can be removed also.
using portal activity you will not get what content the user is accessed, but you can get the what content(iview/page) most users are visiting.
Raghu

How to see all structure and key figures

HI friends,
I can not to see in query designer all structure, all calculated and restricted key figure than I have create.
How can I do??
Thanks
bye bye

May be something wrong with authorisations... Trace it in SU53.
Or this is one of numerous bugs of BEx. Try relogon...
Foolish question: Are you sure that you are using the same infoprovider?

How to connect to Mercator from SAP R/3 System?

Hi,
I would like to know what are the cofig. steps that one has to maintain in order to connect to Mercator.
Here I am using a SAP 4.0 B system and i need to connect to Mercator.
I would like to know the type of RFC used and the type of port used.
If the type of Port is CPI-C port, let me know the config. data that need to entered here to created the port.
Regards,
Raghuram.

Hi,
I would like to know what are the cofig. steps that one has to maintain in order to connect to Mercator.
Here I am using a SAP 4.0 B system and i need to connect to Mercator.
I would like to know the type of RFC used and the type of port used.
If the type of Port is CPI-C port, let me know the config. data that need to entered here to created the port.
Regards,
Raghuram.

How to see console output in Sun Java(TM) System Web Server 6.1 SP7?

Dear All,
I am having Sun Java(TM) System Web Server 6.1 SP7 installed on Windows 2000 Prof.
I have deployed few applications and they were running successfully.
From debugging point of view, i like to see the output from System.out.println .
Prior to SP7 there is a console which shows this output. But now the batch files only starts and stops the admin and site server services. Where to see for console output?
Is there command like tail.exe of Weblogic awailable for Sun Java System Web Server or any setting to be done in Admin?
Please revert.
-Sameer

Response headers can be found in srvhdrs pblock.
Those can be manipulated by using set-variable
http://docs.sun.com/app/docs/doc/820-1638/6nda01tea?l=en&a=view#abuis
You can read more about these in
Sun Java System Web Server 6.1 SP8 Administrator's Configuration File Reference
http://docs.sun.com/app/docs/doc/820-1638?l=en
and
Sun Java System Web Server 6.1 SP8 NSAPI Programmer's Guide
http://docs.sun.com/app/docs/doc/820-1643?l=en

Re: How to see transfer structure in sap r/3 system

Similar Messages

Maybe you are looking for