Re: How to setup database access in Forte Standalone?

Hi Chang Chiang Seng,
I've installed Forte Standalone on Windows 3.1 and would like to set
it up to access an ODBC database.
Is there anyway to do it, since I am not connected to any central node ?The following is a reply posted to this list earlier from Bobby Carp
at Forte, which addresses your question:
2. If you have Win 3.1 or Win 95, then you cannot run an environment
manager or server partitions, but you can still connect to an ODBC
database.
Setting up an ODBC resource manager is very straight-forward. You do
some
of the work in the ODBC control panel (ie. mapping a name to a
particular
data source such as Access file, flat file, etc.). You then run Forte
Standalone which will automatically use ODBC for any DBSessions or
DBResourceMgr
service objects that need to get created by a run. You don't need to
change your service object to point to an ODBC Resource Mgr, the system
does it automagically.
Hope it helps,
Kerry
| | / \ Kerry Bellerose [email protected]
| || C | Senior Consultant http://www.lindhard.com/
| | \___/ Lindhard International
| |_____ Datavej 52 direct: 45 45 94 01 03
| | 3460 Birkeroed desk: 45 45 82 21 21
|_________| Denmark fax: 45 45 82 21 22

Hi Wilson,
As a prerequisite , that VM need to access the gateway .
It means that you need to
create an external virtual switch then connect that VM to external virtual switch then allocate a LAN IP for VM .
http://technet.microsoft.com/en-us/library/jj647786.aspx
After this you may think of this VM as a physical machine in your LAN then do what you need .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

How to setup database access in Forte Standalone ?

Hi,
I've installed Forte Standalone on Windows 3.1 and would like to set it up to access an
ODBC database.
Is there anyway to do it, since I am not connected to any central node ?
I tried to follow the instruction on the book but was not able to set up a DB Resource because
the EConsole cannot be executed.
Thanx.
Chiang Seng, Chang
<[email protected]>

Hi Wilson,
As a prerequisite , that VM need to access the gateway .
It means that you need to
create an external virtual switch then connect that VM to external virtual switch then allocate a LAN IP for VM .
http://technet.microsoft.com/en-us/library/jj647786.aspx
After this you may think of this VM as a physical machine in your LAN then do what you need .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to setup the access privilege of flash file in Web Intelligence?

How to setup the access privilege of flash file in Web Intelligence? WEBI can set access privilege for single WEBI report file, but it seem cano not set access privilege for one flash file.

Thank you Maksim,
I did set the "selectionMode" to "Auto". I don't understand where In supply function I have to set lead selection of nested node to first element. Please elaborate on this. Are you talking about the context attribute bound to the second table? OR do I have to change the Importing parameters "Node" and "Parent_Element" of my supply function?
Thanks for your time.

How to setup external access in VM?

We need to setup a Microsoft VM and allow external access without using my company VPN as we need to test the web services integration with other vendors. could you please help how to setup external access? Thanks

Hi Wilson,
As a prerequisite , that VM need to access the gateway .
It means that you need to
create an external virtual switch then connect that VM to external virtual switch then allocate a LAN IP for VM .
http://technet.microsoft.com/en-us/library/jj647786.aspx
After this you may think of this VM as a physical machine in your LAN then do what you need .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to setup database trace on odata service

I have found two discussion which mention that we have to setup database trace but how is the question? if some one can please help me out step by step setting up the trace on odata service, links are as follows
Manage multi-table insert using OData Service
Where can I see logs of OData Service usage?
in aforesaid discussion they have said plz give path to xsa:<package path> but when i go to database trace config there is no option where i can give the path so please help...

In the database trace / trace configuration dialog: first be sure to check Show All Components. Then in the input box at the top of the dialog type xsa:<your package>. You can type just a partial package name as well and the search will find all matches.

How to setup remote access with E4200?

Hi,
I am new to this and I need help from you all on how to setup the E4200 so that I can access the media server when I am in office? Is there a guide or step by step procedure on this? I was browsing on the Cisco website and unable to find it.

The purpose of using DDNS is it substitutes the public/WAN ip address provided by your ISP.We all know that the ip address provided by our ISP(if we are not subscribe to a premium static ip address) is basically public and will always change from time to time.So it will be difficult for us to know what's the ip address our ISP has provided us and this will lead us problems accessing our router or ftp server remotely. Thus by using DDNS' it will now allow us to access the router remotely without knowing what's the WAN ip address.

How to setup Mobile Access Server

Hi,
I am trying to setup Mobile Access Server on my Mac Mini Server. The setup I have is a small network behind a Airport Extreme. I would like to give all users access to services using Mobile Access Server and was hoping initial setup was going to take care of that....no such luck.
What do I fill in for the local servers? How do I access this service from the outside the lan? How do I need to configure my Airport (with the other services, it happened almost automatically from the security pane).
Thanks,
Ian

Hi,
In the field for local server you just type in the local dns name for your calendar server, mail server etc... Also select which port you want publish externally and the the correct port your service is actually using on your lan (Selected under advanced tab). Make sure your mobile access server can resolv your hostnames correctly. It should point to an local ip. If an nslookup shows your public ip, you have to correct your local dns server (This is often called split dns configuration.)
To access this from outside your LAN you have setup NAT and permit the port you have configure your mobile access server to be the incomming port. How exactly you do that on the airport I am not sure, but I am sure it is explained in the user manual for the airport.
I found this video about the mobile access server on youtube: http://www.youtube.com/watch?v=_VRgl2bncZU
Hope this helps.
Bernt

How to setup database support Multipule Language

I want to create a database can store Chinese and English data. Previously, I have tried to use UTF8 char. set but some unexpected Chinese character shown on the client side (Window 2000).
Which character set I should choose and how to setup Server and Client character set/code page?
null

Check out
http://otn.oracle.com/products/oracle8i/listing.htm#nls
null

How to setup the access duration for user

Dear experts,
As requrement of users, we need to setup the access duration for all users of our company . It's mean users only access into SAP on defined duration
Ex : Working time is 8h00 am to 17h00 pm, after 17h00 pm, users cannot access into system
Please help.
Thanks,
Neo

Hi all,
Thanks for your solution
We want to set the access duration for end-user but sometimes, we need to flexible to allow user access to system in some special case.
Let me detail users's requirements
- Users can access to SAP fom 8h00 to 16h00
- At 16h00, system will send the warning message to user to inform that system will aunomatic turn offf after 15 minutes, it's mean system will automatic kick out users after 15 minutes
- From 16h00 to 8h00, users can not access to SAP
- However, in some special case, we can grant the acess to system to specific user.
Can we setup these steps on SAP ?
Thanks,
Neo

How to Setup another Access Policy 5.3

hi everyone,
Thank you for your help in advance. I am new to v5.3, and I am not good at VPN. So hope you can help.
I just have my consultant to configure this correctly just today. Currently, there is only one rule for the access policy (Single Result Selection). That rule is to use Active Directory as the source for the authentication. And by default will deny any other access which is not found in the rule.
Now... I just got an order that I need to setup a new user who will need to access to our network by using Cisco IPSec VPN (the software one). But that user is not setup in our Active Directory, and we do not want him to access our domain anyway. He only needs to access non-domain resourse...such as airconditioning controller by IP. So I am thinking to setup his account by using "internal identtity". If I do this way, what do I need to do to setup another access policy? May you give me some steps with little more details?
OR... if it is not the way I should do...what else can I do to achieve this goal? Also, he said he could provide his static IP trying to access from.
I have a ASA 5520.
Thank you very much for your help.
Takami Chiro

Hello,
Instead of creating a separate rule for the credentials validation you can edit the existing one that points to AD1 (only) and change it to a result on the ACS that checks both AD1 and Internal Users. In that case we need to use Identity Store Sequence. Refer to the steps below:
On the ACS GUI > Users and Identity Stores > Identity Store Sequences > Create > Select "Password Based" and on the first box move AD1 and Internal Users to the right. Please do the same on the box at the bottom.
The option "Internal User/Host Advanced Option: If internal user/host not found or disabled then exit sequence and treat as "User Not Found" should stay unchecked. Click submit.
After creating the ID Store Sequence you need to change the Identity Result where you had AD1. Now the name of the ID Store will display as an available option. Please select that one and save the changes.
With the above configuration, the expected behavior would be:
1) ACS receives a request from the Internal User.
2) ACS tries to validate the credentials against AD.
3) AD returns an "User Unkown" response.
4) ACS moves to the Internal Users.
5 ACS successfully authenticates the user validating the provided credentials against Internal Users.
Hope this helps.
Regards.

How to enable database access from Java or CSharp ?

I set up an Oracle Express database on my local computer.
Now I want to connect to this databsee from a CSharp (or Java) program.
How do I have to specify the connection string?
The following does NOT work:
connectionstring = "Data Source=XE;User Id=karl;Password=mypassword";
connection = new OracleConnection(connectionstring);
connection.Open();
I am getting an error
"Invalid argument" ORA-12532 error
How do I have to specify the connection string otherwise ?
Is the sequence of the parameter Data Source, User Id and Password
important ?
How do I get a more detailed error message from Oracle ?
Do I have to enable the accessibility from outside programs
in Oracle somewhere ?

about to the error:
ORA-12532 TNS:invalid argument
Cause: An internal function received an invalid parameter. This message is not normally visible to the user.
Action: For further details, turn on tracing and re-execute the operation. If the error persists, contact Oracle Support Services.
Regards

How to setup database user for windows NT SSO

Hi,
We have a scenario where we have to setup a database user so that SSO can be worked in windows environment.
We have oracle 10g installed on UNIX server. Now we want to setup a autosys user which will also be a winows user for eg by the name kumaral and domain (which is Logon option in windows) will be FM, so eventually user name will be FM\kumaral. Autosys will be on windows machine and we have installed oracle client on this machine.
On oracle database we have created two user by following syntax:
(1) CREATE USER "OPS$FM\KUMARAL" IDENTIFIED EXTERNALLY;
(2) CREATE USER "OPS$FM\kumaral" IDENTIFIED EXTERNALLY;
Also we have provided connect grant to these users.
GRANT CONNECT TO "OPS$FM\KUMARAL".
GRANT CONNECT TO "OPS$FM\kumaral".
I am login in windows through FM\kumaral user, but we are not able to connect to oracle through this user, we are trying to connect to oracle from below mentioned query:
sqlplus /
but we are not able to connect.
Can someone please help me on this?
Thanks in Advance.
Amit.

Check MOS note :
WIN: Setup O/S Authentication [ID 60634.1]
Regards
Rajesh

How to setup wireless access not to cross internal vlan?

hi folks,
I am about to set up a wireless network for our library users that come in from the public and bring their own laptops. We would like to have two options:
1) they can open their laptop and just jump on without any authentication. but this traffic should not cross my internal vlans. I was thinking i'd put the AP off the DMZ.
2) if they need to come inside they must create a vpn connection.
would this be considered 'secure'?
how best can i do this?

Putting the AP in your DMZ is one of the classic wireless security techniques. It's quite secure in terms of protecting your private network- although there's obviously no control or security regarding unknown users accessing the public internet. Basically, you're giving free internet access to anyone who wants to use it... if this doesn't bother you and your only concern is your own private resources, go for it.
Obviously, you'd need to make sure that your VPN solution is working properly for those users who are authorized for the private net.

How to audit database access by IP address?

Hello,
In SQL 2008 R2 Enterprise is there a built-in mechanism to be able to audit and log the SQL loginname along with their IP addresses when they access a particular database? Most of the logins only have the role for db_datareader so I need to audit basically
everyone that is connecting to the database and whether they are running select statements or not.
Thank you.

Dear Forum and All,
I have working with Audit in SQL Server 2008. But my result cannot have HOST_NAME and IPADDRESS of Client.
This is my code:
Create Audit
USE [master]
GO
CREATE
SERVER AUDIT [Audit-20141206-090946_ControlEven]
TO
FILE
FILEPATH = N'C:\Audit'
,MAXSIZE = 0 MB
,MAX_ROLLOVER_FILES
= 2147483647
,RESERVE_DISK_SPACE
= OFF
WITH
QUEUE_DELAY = 1000
,ON_FAILURE =
CONTINUE
GO
Create Database Audit Specification
USE [TESTAUDIT]
GO
CREATE
DATABASE AUDIT SPECIFICATION [DatabaseAuditSpecification-20141222-082141_Control]
FOR SERVER AUDIT [Audit-20141206-090946_ControlEven]
ADD (SELECT
ON OBJECT::[dbo].[tblTesting]
BY [public])
GO
This my result
Event_Time|Session_ID|Server_Principal_Name|Statement|.......|.........
But I need column HOST_NAME and IPADDRESS of Client in my result.
Thank you for your cooperation and support.
Best Regards,
Mr. Pann Matak

How to setup oracle database to archivelog mode and auto delete ?

Oracle 11g R2
- How to setup database to archive log mode and have oracle only save 24 hours of archive logs
and delete the rest. So at any given time I will have only 24 hours of archive log and not more.
So only 1 day of archive logs.
- Let me know the database parameters I need to setup to accomplish this.
- I don't want to use the RMAN
- I am not setting up the database to archive log mode for recovery purpose. I am setting up archive log mode
so we can use the log miner tool to dig up achives to see log activity for any performance & tuning.
Edited by: johnpau2013 on May 9, 2012 6:09 PM

johnpau2013 wrote:
Thanks everyone for there responses.
I need to rephrase and explain everyone as what I wanted to do exactly. This might help everyone understand and suggest me.
We have oracle database 11g r2. Its a test database. Nothing is critical. We use EXPDP utility to backup the entire database every night. Which is enough for us to recover incase something happens. Even if we loose some data. That's fine.
We are testing our web application on this oracle test database for performance & tuning.
One thing we have noticed is that the redo logs are switching very frequently. 50MB each log file and there are 5 logs. each log switches every 40 seconds. So we wanted to see what is getting written in this redo logs. We wanted to use the LOG MINER tool in OEM to read the logs. It needed our database to be setup in archive log mode. So the log miner can read the archive logs and show us the sql's within the archive logs.
Now when we setup the archive log mode on our database. By default the archive logs destination was set to flash recovery area ( may be oracle default archive log location is flash recovery area folder).
We have setup the db_recovery_file_dest_size to 100GB. Now within 2 days we have filled up the flash recovery area folder. Database was frozen. Then we realized that its because oracle couldn't write archive logs. Because it reached the 100GB. Then we physically deleted files in the flash recovery area folder. Thinking it would help us start the frozen oracle database. But it didn't . The we realized that we are doing something wrong. As Oracle does not know that at OS level we deleted the files. Then temporarily we changed the db_recovery_file_dest_size to 130GB and were able to start the oracle database. Later we turned OFF the archive log mode.
Being a rookie DBA we would have not read something properly.
Finally:
We wanted to know how to always keep only 1 day of archive logs (only for our performance tuning ) and not more than that. All we need this 1 day of archive logs is to use the log miner to read them. Backup is NOT our priority here. Only be able to read the archive logs from LOG MINER is PRIORITY.
Correct me if I am wrong.Okay, so its making much more sense now, thanks for explaining your requirement.
Database won't honor anything that you would do over the o/s without telling it. Your deletion of the archive log from the o/s location is NOT updated in the control file of the database and that's why, even when you had deleted the entire 100GB , from the db perspective, the space was still marked as used. This is the same which would happen even if you would increase the space from 100gb to whatever size as well. To delete the space, you would need to update the database's control file and that you can do from RMAN using its two commands , crosscheck backup following with deleted expired backup . The first command would find that which database backup files are NOT on the o/s which are shown in the control file and would mark all of them as expired. The second command would simply delete those expired files. This would update the control file and you would have your 100gb or whatever space, given back to you.
To keep the archive logs of just one day, set up that Retention Policy for RMAN to either number of copies using the Redundancy option(default and set to 1) or Recovery Window. I believe for you Redundancy would be a suitable choice but you can have a read and play around with it. Setting it up would mark the files as Obsoleted and finally, you can write a small RMAN script to delete those obsoleted files.
Now, what I don't understand is that why you want to keep on generating the archive logs just for the log miner? If you would have generated them once and figure out the reason for extensive redo generation(did you try increasing the redo log file size, 50mb seems to be smallish) , I don't think that there is any reason to keep on generating the archive logs still .
And last part, for your question asked about that whether we can use RMAN to put the db in the archive log and is it a backup tool, yes and yes.
HTH
Aman....

Re: How to setup database access in Forte Standalone?

Similar Messages

Maybe you are looking for