Re: How to use the second hard drive in Satellite A300?

I have been given a second hand Satellite A300 that was being thrown out due to a faulty DVD.
I fixed the DVD and have a perfect working system.
On opening the case I discovered it has 2 x 250GB hard drives. I checked CMOS and the 2 drives show. Yet, Vista only shows the one drive.
Excuse my ignorance but how do I access the second drive?

I have Satellite A300 with two hard drives and each HDD has other operating system. Both HDDs are recognized properly.
I dont know what is wrong there but both HDDs should be recognized automatically.
Try to set BIOS to default settings and check it again.
Try to start bootable Microsoft installation disc and check if both HDDs are shown in setup.
I just hope there is no some hardware problem.

Similar Messages

  • Using the second hard drive in my G5

    I bought my Mac about 14 months ago with twin 250GB hard drives fitted. I wanted to use the second hard drive to store my CD collection through itunes.
    I have tried to install itunes on the second hard drive but the software installer says it has to go on the startup volume. I have also tried copying my itunes folder and pasting it to the second hard drive as a backup but it won't allow this either. It says that the drive cannot be modified.
    How do I use the second hard drive as intended? I upgraded to Tiger so do I need to install that on the second hard drive?
    Thank you.

    Hi Mike;
    I have a 250 GB and a 160 GB hard drive in my Quad. A long time ago when I had much smaller drives, I did move Users to another disk because I was running out of space on my system drive. One of the problems I ran into with this was when my second drive with Users on it didn't start quickly enough for OS X. OS X created a new Users for me with nothing in it. It was a royal pain getting my system pointed back to the Users on the second drive.
    What I do now is leave Users where OS X installs. I now move just my project files, music, photos and web pages. I find that this is largest part of Users. It is also the part of Users that I am the most concerned about. With all of my project files on another drive, the system is able to access data from both drives very quickly. It also makes backup simpler.
    Allan

  • How to use my second hard drive on my desktop pro

    I have a 12 core desktop pro with 2 HD's installed. How can I use my second hard drive independently? To use it as a second computer unto itself without all the
    extra add on's I have on drive one.

    how long ago did you ask this question?

  • How to exculde the second hard drive backup from time machine of lion os

    My Mac Pro 2010 mid version is using Mac Lion OS, and I have installed three internal hard drives (two 3T hard drives for storage one 2T hard drive for time machine hard drive). When I start to run the time machine to backup the system hard drive, the time machine will include those internal hard drives automatically, and it stop backup and claim time machine is lack of storage space. Of course I know it is not big enough to backup those extra hard drive. However, I just only need to backup the system drive only, but I cannot locate any setting related how to exclude other internal hard drive in time machine. So I still cannot backup my system drive yet.   

    See:
    http://pondini.org/TM/10.html
    10.  Can I exclude things from Time Machine backups?

  • How to use the 4 hard drives

    I recently bought a MacPro that has 4 hard drives, the Time Machine has filled the 3 storage drives and the start up drive is full. How can I get more space on the drives without loosing everything on them?

    Yes, you will lose the backups on those three drives. The thing is that if you need three hard drives for your Time Machine backup, then the backup drive capacity is too small for all the data on the startup drive.
    Did you set up the Time Machine backup or are they from the previous owner? Relate this information, if you will:
    Capacity of each hard drive (identify the startup drive.)
    How much of each drive is used.
    How much of each drive is available.
    Why are three drives used for Time Machine?
    You can get the information by selecting a drive. Press COMMAND-I to open the Get Info window. The information is displayed in the upper panel.

  • Is it better to install windows on the same mac hard drive or use the second hard drive bay as it's own? Im also using deploy studio and am having trouble creating a workflow to assign the bay.

    Have mac pros with 1tb drives in tem. Trying to figure out imaging via deploy studio.

    For the easist install and problem solving having W7 on it's own disk would be the best way to go.
    The only thing you need to do is either take out the lower # drives ahead of the future Windows disk or put the Windows HD in bay/slot #1. (or just take out all but the future W7 disk and install it manually works too)
    The easiest way would be to put the W7 drive in slot slot/bay #1 then you can still use BC Assistant to install the drivers and such.
    After the install you can have the Windows drive in any slot you want.
    I'm not familier with Deploy Studio so can't help you beyond this.

  • When I try to use the internal hard drive as a scratch disk I get this error "unable to set scratch disk- the selected directory is on write protect or non-writable media.  Any ideas on how to fix this.  It only happens in fcp.

    When I try to use the internal hard drive as a scratch disk I get this error "unable to set scratch disk- the selected directory is on write protect or non-writable media.  Any ideas on how to fix this.  It only happens in fcp.

    By internal, I assume you're referring to your systems (boot) drive. Is it, by chance, a partitioned dive?
    Also…although many people successfully use their systems drives as scratch disks, over time you'll have better results using a dedicated drive for your media.
    Good luck.
    Russ

  • How do I reformat the second hard drive in the Mac Mini Server (Late 2012)?

    In Disk Utility, I don't see the second hard drive, I only see the SSD that I installed myself in the main boot drive. How do I gain access to  reformat the second drive?

    Did you reinstall the OS after you installed the SSD?
    If so it would have created a Fusion drive that looks like one drive.
    If you go to System Report, what shows under the SATA bus? You should see both the SSD and the HD if it is recognized to some degree.

  • Hello, I have a G5 PPC. I want to install a copy of Entourage on the second hard drive. Can I do that or will it create problems for the processor?

    Hi everyone
    I had a very old intel iMac from late 2006 which was dying now dead. I just managed to copy the Entourage folder onto an external hard drive before the iMac gave up the ghost. But I could not open the Entourage copy on the G5 PPC. each time i tried to do so the PPC copy of Entourage would open instead.I have emails on the PPC copy and do not want to lose them. I was wondering if it would be possible to install another copy of Entourage on the second hard drive? I was hoping that by doing that I could access the information from the iMac which has been copied to an external hard drive.
    Any help would be very very welcome.

    I don't think MS lets you install Entourage outside of an active system folder. However, you can install a fresh copy of Entourage on the G5's hard drive (if you have Office 2008 or lower), then use Entrouge's Import command to move the data files from the old hard drive.
    We're done this several times as we've upgraded either computers or Entourage.
    However, I think that, before you act, you should also ask in Microsoft's user forums here:
    Office for Mac forums
    They are excellent and often an employee of their Macintosh unit will assist in answering.

  • I just purchased the Mac Mini Server with the intention of replacing Lion Server with Lion for the first hard drive while installing Windows 7 thru Bootcamp on the second hard drive. Is it possible for me to do this? Thanks.

    I just purchased the Mac Mini Server with the intention of replacing Lion Server with Lion for the first hard drive while installing Windows 7 thru Bootcamp on the second hard drive. Is it possible for me to do this? Thanks.

    I would use Parallels or VMWare and use the second drive to hold the virtual machine. That way the VM only uses the space that it needs and you can still use the remainder of the drive for other things, not to mention that you would not need to reboot to run windows.
    Also Time Machine does not back up a boot camp partition.

  • New iMac. Flash drive is primary for OS and apps.  I want to use my HD 2 (1 TB hard drive) for my bulky photo and music files.  Can I direct iPhoto and iTunes to use the larger hard drive as the primary target when importing?

    New iMac. Flash drive is primary for OS and apps.  I want to use my HD 2 (1 TB hard drive) for my bulky photo and music files.  Can I direct iPhoto and iTunes to use the larger hard drive as the primary target when importing?

    Yes.  Unfortunately, I don't know the specifics because I don't use iPhoto anymore and I completely copied over 15 years of MP3 files recently when I installed 10.7.  Needless to say, I have not opened iTunes since and probably never will again - not because of iTunes but because of my stupidity.  I did have some of the files backed up but I hadn't backed up in a while.......anyway....
    When I imported my CD's, I had them go directly to my external firewire.  I can't remember exactly how to set it, but in the preference section of iTunes you can specify an import destination to any drive that's available to your machine.  I did this with iPhoto as well way back at one point when I was using Tiger, but I don't remember the specifics on that either.  I can't imagine they would have discontinued support for that feature since then. 
    Sorry I couldn't help more.

  • How to use the second display for installation OS in my vertical lines iMac

    My 17" iMac display is full of vertical lines, it is unuseable. Does anyone know how to use the second display for Mac OS X or disable the first display for installation Mac OS x ?

    Go to: *System Preferences > Displays* and select the Arrangement tab, then relocate your Menu bar by dragging it to the other display.
    Unfortunately there is no Hardware or Software switch to turn off the iMac's Internal Display.

  • How to install the second hard disk (HP ProBook 6560b LG658EA) ?

    How to install the second hard disk (HP ProBook 6560b LG658EA) ?

    Hi,
    You can install a second HDD in the Upgrade Bay - this is detailed on Page 67 of your Maintenance & Service Guide.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • I'm just curious, what does Apple name the second hard drive

    I got a G5 with one hard drive which was by default named "Macintosh HD". When someone orders two hard drives what does Apple name the second hard drive by default? I'm just curious.

    "...what does Apple name the second hard drive..."
    Raul.

  • IMAC 24" screen went dead. Can I buy a mac compatible monitor and still use the IMAC hard drive?

    IMAC 24" screen went dead. Can I buy a mac compatible monitor and still use the IMAC hard drive - which is still working? I took it to the Apple store and they quoted $500+to replace the monitor. No help as usual. Can I buy a MAC compatible monitor ($189) and use it as a primary monitor? Can I set it up if the screen on the IMAC is dead? Any other solutions?

    The only negative to not having the original drive will be the work needed to reinstall all the apps and reconfigure to your liking. You will also have to decide whether to stay on Lion (which you should update to 10.7.4, BTW) or bite the bullet and take a leap of faith on Mountain Lion.
    In either case, to simplify matters you would do well to concoct a Lion or ML bootable installer on a USB stick. In either case, you need to get the corresponding installer downloaded onto the hard drive and, instead of running it to execute the install, extract the coveted InstallESD.dmg image from which you construct the bootable installer. See here for details: https://discussions.apple.com/message/17782820#17782820  The procedure applies the same to both of the latest cat flavors.

Maybe you are looking for

  • Report not Running........

    Hi All, I'm using HFR 9.3.1.When i try to run a report it shows the following message : "5200 : Error executing query: localhost/sample/SampDb/admin/Error(1012703) Unknown calculation type [0] during the dynamic calculation. Only default agg/formula/

  • N80 Bug?!! Help, please...

    Hi, in the menu, there's a folder called gallery, (in which are the photos, music, videos,etc...) i don't know how, but i've changed the name of this folder, while i was making a new folder, and now i can't change the name back... I know that changin

  • What are the basic element of Base configuration of an oracle Database ?

    What are the basic element of Base configuration of an oracle Database ?

  • Making A Xterm Use All Of The Screen In RatPoison

    After asking for some suggestions, I just gave RatPoison a try and I really like it. I do have a quick question that I hope someone will be able to help me with. When I run an Xterm, I can still see some of the background on the right and the bottom,

  • Suitable user interface application for a billing system

    I am seeking an appropriate friendly user interface application that is appropriate for a billing system to interact with an oracle 10gr2 database. Thanks