Re: HP 15-g020ca long wait time to reach lock screen windows 8

i have the same issue as this guy but can't seem to figure it out.
http://answers.microsoft.com/en-us/windows/forum/w​indows8_1-performance/45-seconds-delay-to-reach-lo​...
long wait time when i open the lid of my notebook. it says locking for a good minute or more, if i do win+L to manually lock it , it takes the same amount of time. can anyone help!! thanks

DSORacing wrote:
I have same problem but in a 15-j040us. I made everything that you offer as solution but it cannot upgrade to Windows 8.1.  I read this post from another user with same graphics adapter that my laptop has and it looks like a solution, but at the same time, looks quite dangerous to make. Here is the post. http://208.74.204.203/t5/Notebook-Operating-Systems-and-Software/Updating-to-WIN-8-1-Fix-to-black-sc... Let me know if yu can help with this issue as soon as possible.
Thanks!
This  worked for me after 7 attempts with all kind of solutions on different forums. HP Envy 15 Notebook - Intel HD 4000, Nvidia 740
Locate the F11 key and start tapping it as soon as you turn on the system.
Stop tapping once you reach the recovery manager screen.
Click Troubleshoot .
On the Troubleshoot screen, click Recovery Manager .
On the OS selection screen, click Windows 8 . Recovery Manager opens.
Under I need immediate help , click Minimized Image Recovery .
When Recovery Manager prompts you to back up your files, select a backup option.
If you have already backed up personal files or you do not want to back up personal files, select Recover without backing up your files , then click Next . Continue to the next step.
Follow the on screen options and complete the system recovery.
After the system recovery is complete, click Finish to restart the computer. Complete the setup screens and wait until the computer finishes the setup
-Then, make sure to install all updates via Windows Update. Do NOT install any drivers for graphics etc.
-I did NOT do any updates with HP Assistant
-Run the update via Wired network, disable WiFi and Bluetooth
-I did disable all things in Autostart. Could be reached via Win8 taskmanager
-Ran Microsoft Compability checker
Update went fine this time.
Some of my steps might not be needed. And of course if MS compbility checker says a driver is not compatible you will have to update it.
Hopefully it will get you there.

Similar Messages

  • IPhone 6 Plus no longer shows time on the lock screen after iOS 8.2 update

    Question as seen above. after updating my iPhone 6 Plus to iOS 8.2, it no longer shows the current time on the lock screen. It also takes a couple of seconds for it to load the status bar at the top of the screen. Restoring from iTunes didn't fix it. Please help!

    Hello RCountrykid,
    Thanks for using Apple Support Communities.
    From your post I understand that you are unable to connect your Bluetooth device with your iPhone 6.  To troubleshoot this connection issue, I'd like you to please follow the steps in the article below.
    iOS: Troubleshooting Bluetooth connections - Apple Support
    Have a good one,
    Alex H.

  • If the flash object is placed in 0px div, the creationComplete event is fired after a long wait time

    <Problem>
    My requirement is to hide flash object on browser. However, If the flash object is placed in 0px div, the creationComplete event is fired after a long wait time. Is this a bug of Flex? (or Flash Player?)
    <Sample Code>
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute"
              initialize="app_initialize(event);" creationComplete="app_creationComplete(event);" >
    <mx:Script>
            <![CDATA[
            import mx.events.FlexEvent;
        private function app_initialize(evt:mx.events.FlexEvent):void
                  ExternalInterface.call("alert", "application initialize.");
        private function app_creationComplete(evt:mx.events.FlexEvent):void
                  ExternalInterface.call("alert", "application creation complete.");
        private function button_creationComplete(evt:mx.events.FlexEvent):void
                  ExternalInterface.call("alert", "button creation complete.");
            ]]>
        </mx:Script>
        <mx:Button id="testButton"  label="button"  creationComplete="button_creationComplete(event);"/>
    </mx:Application>
    <Steps to reproduce>
    1) Dowload the following samples
    MySwf-src.zip
    https://files.acrobat.com/a/preview/c6b7a191-c6c4-486f-9345-e2b5c21a4c0b
    TestSwf.zip
    https://files.acrobat.com/a/preview/98e613e1-63b1-4b2f-93f3-f6e4f4a27f24
    2) Unzip TestSwf.zip.
    3) Copy MySwf.swf, TestInvisible.html, and TestVisible.html to "c:\inetpub\wwwroot\". (Need to install the IIS.)
    4) Visit "http://localhost/TestVisible.html" via IE. notice the creationComplete event fired after initialize event immediately.  -- Correct
    5) Visit "http://localhost/TestInvisible.html" via IE. notice the creationComplete event fired a long time after initialize event.  -- Incorrect
    <Environment>
    Win8.1x64+IIS8.5+IE11+Flash player(13.0.0.182)
    <Note>
    If the flash object is placed in 1px or larger div, the creationComplete event is fired immediately.
    The problem occurs with other browsers(IE9,IE10,FF,Chrome) too.

    Thank you for your response. The computers are indeed running Flash Pro CC 13.1.0.226. I tried to generate a minidump file on four different computers where Flash Pro hung, but was not able to do so on any of them as Flash Pro makes the entire system unresponsive. I get the spinning circle cursor and then the GUI of all apps greys out and fails to update. I don't actually get any sort of error message; everything simply stops responding.
    I was probably unclear above; even if I can alt-tab I can't really interact with any other programs once Flash Pro hangs beyond one or two mouse clicks. So on some computers I could right-click on the process in Process Explorer and choose to create a minidump, which then froze, or I might right-click on the process and have it immediatly freeze. I've experienced about two dozen crashes and I've never been able to really use another program or even kill the Flash process in task manager. I also have to power off the computer by holding down the power button, since while I might be able to open the Start menu I can't reach the point of being able to shut it down without it freezing.
    From what I was able to see in Process Explorer, Flash Pro was using <1% CPU and 120M private / 170M working memory.

  • HT3964 programs hanging; long wait time

    programs hanging; long wait time for 'pie' to clear; reset the smc and still not functioning.  pls. help.

    Hello, see how many of these you can answer...
    See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
    http://support.apple.com/kb/PH7029
    Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
    How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
    Open Console in Utilities & see if there are any clues or repeating messages when this happens.
    In the Memory tab of Activity Monitor, are there a lot of Pageouts?
    https://discussions.apple.com/servlet/JiveServlet/showImage/2-18666790-125104/AM Pageouts.jpg
    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    Reboot, test again.
    If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on,IPmyriadLogin Items window to see if it or something relevant is listed.
    Check the System Preferences>Other Row, for 3rd party Pref Panes.
    Also look in these if they exist, some are invisible...
    /private/var/run/StartupItems
    /Library/StartupItems
    /System/Library/StartupItems
    /System/Library/LaunchDaemons
    /Library/LaunchDaemons

  • Long wait time for /sap/webcuif/uif_callback

    STAD shows following record indicating a very long wait time. Seems the application /sap/webcuif/uif_callback mentioned in the record is a CRM WebClient UI framework related service defined in transaction SICF. I did not observe such long wait time on other HTTP requests and applications. Why could this happen? How to analyze further? The system is CRM703 SP03.
    CPU time                       0 ms
    RFC+CPIC time                  0 ms
    Total time in workprocs        3 ms
       Response time           49.658 ms
    Wait for work process     49.655 ms
    Processing time                2 ms
    Load time                      0 ms
    Generating time                0 ms
    Roll (in+wait) time            0 ms
    Database request time          0 ms
    Enqueue time                   0 ms
    Number      Roll ins            1
                 Roll outs           1
                 Enqueues            0
    Load time   Program             0  ms
                 Screen              0  ms
                 CUA interf.         0  ms
    Roll time   Out                 0  ms
                 In                  0  ms
                 Wait                0  ms
    Frontend    No.roundtrips       0
                 GUI time            0  ms
                 Net time            0  ms
    Call number                                         6
    Connection-Id          6CAE8B34B9581ED49BF5441DA68E2F2A
    Communication step     Send/Receive
    Timestamp              20141119 131100 CST
    Host                   XXXXXXXXX
    Port                   8001
    Path                   /sap/webcuif/uif_callback
    Status phrase          OK
    Status code              200
    Protocol               HTTP
    Method                 POST
    Virtual host               0
    Calling time                                        2  ms
    Remote exec. time                                   0  ms
    Data send time                                      0  ms
    Data receive time                                   0  ms
    Idle time                                           1  ms
    Sent data                                         107  Bytes
    Received data                                   2.682  Bytes
    Thanks.
    Regards,
    Jason

    Hello Jason,
    the "Wait for work process" means the request was at the dispatcher queue waiting for a work process.
    Probably at that time all  the DIA work processes in that instance were occupied.
    was that the case?
    kind regards,
    Mercedes

  • Incredibly long wait times [SOLVED]

    anyone have any idea why I'd be getting *incredibly* long wait times on my server? [http://omploader.org/vNTRuYg]
    it only seems to affect my wordpress installation, though.. everything else seems ok. I don't get it.
    EDIT: changing the SCRIPT_FILENAME fastcgi_param to $document_root$fastcgi_script_name seemed to help quite a bit.
    Last edited by Stythys (2010-08-03 03:28:11)

    How to get to your VZ Router
    http://192.168.1.1
    User Name: admin (is the default)  or YOURS IF YOU HAVE CHANGED IT
    Password:  Enter the password that is printed next to “Default Password” on the label attached to the bottom of your FIOS Router..or YOURS IF YOU HAVE CHANGED IT
    Now you are at the main menu for your router
    EXPLORE ALL BEFORE CHANGING ANYTHING
    THEN GOT TO Wireless Settings if you want to set up WPA2
    Advanced Security Settings
    Custom Pre-Shared Key….MINE IS 20 CHARACTERS ALPHA NUMERIC      ASCII
    SUGGEST YOU RECORD ANY CHANGES THAT YOU MAKE
    Verizon FIOS Router Manuals
    http://www.verizon.com/support/residential/internet/fiosinternet/networking/user+guides/user+guides....
    Tom
    Freedom Essentials, QIP 7100 1,Bose SOLO TV Sound System,,QIP 7216 P2,M1424WR Rev F, iPad 2 WiFi,iPhone 5,TV SYST INFO Release 1.9.5 Build No. 17.45
    Data Object 39.45

  • Long waiting times when going back to the organizer after doing changes of images. Elements 11.

    After doing changes of images and going back to the organizer I have to wait a long time. This was not the case when I used elements 9. I have a lot of images stored around 18000. There are also often long waiting times when I move around in the organizer. Any suggestion?
    Bo Augustsson

    Please see blog: http://psekb.blogspot.in/2013/04/how-to-improve-pses-performance-please.html
    Please let me know if that doesn't helps.
    ~Andromeda

  • Since update, start up problems.  Must push start button, must enter password several times, long wait times, must push start button again and enter password again.

    Since update I have start up problems.  Laptop seems to shut down. 
    Must push start button, then wait to enter password.  Long wait time, then screen goes black and I must push start button again and enter password again.  More long wait times.  Startup each morning takes up to ten minutes. 
    I have 4GB Memory and 2.5 GHz Intel Core i5 Processor.

    Does it start up normally in safe mode?

  • Why is location arrow on status bar every time i open lock screen even when nothing running

    why is location arrow on status bar every time i open lock screen even when nothing running

    Something is using location services...
    Go to Settings>Privacy>Location Services. You can see what, if anything, is currently using location services, and what has used it within the last 24 hours.
    An open location services arrow means there is a geo-fenced reminder set.

  • Walkman needs a sleep timer and a lock screen widget

    I really would recommend a sleep timer and a lock screen widget.

    The timer has been requested before. As for the lock screen widget it is there whenever you play music. 
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Long wait time in settings/general/iMessage/contacts/camera

    I Have around a 8 second long respond time when trying to access the settings and in general iMessage contacts and camera on my iPhone 4s. I'm on the latest os. It all started happening when my wifi and Bluetooth stopped working Last year.

    If you're WiFi and BT buttons are greyed out, you have a hardware problem. I've never heard of that particular hardware problem causing the symptoms you're seeing now. However, if you also updated to iOS 7 around the same time, I'd expect that you'd see a slight drop in performance, though generally not quite as much as you describe. 
    What troubleshooting steps have you already taken? Have you tried resetting your device by pressing and holding the Home button and power button until the silver apple appears? Go to Settings>General>Usage and check to see that you have a reasonable amount of available space. Make sure you don't have a huge number of photos. Restore the phone as new (after syncing your data).

  • How do I turn off the time?  The lock screen appears each time I open the smart cover.

    No matter which app I'm in, when I open the smart cover, the lock screen with the time shows.  This is on an iPad Air
    On my iPad Mini, it goes right to the app and skips the lock screen.
    It's sure nicer not to be reminded what time it is in the middle of the night--and not have the brighter lock screen flashed!

    Appreciate the reply.  The settings are identical, so that's not it!  I do not use the pass code lock, in any event.  The behavior I'm describing is, in fact, turns out to be unrelated to the lock settings! 
    It depends upon whether an alert has occurred after the last time you closed the cover!  In iOS 7, that will show the lock/unlock screen with the alert when you next open the cover.  In iOS 6, more properly, it will show the alert over the screen you were last looking at--no lock screen at all.
    On our iPad Mini, iOS 6, we do not use the calendar, so no alerts, and we never see the lock screen or its glaring time (count me among those who would rather not know it's 3am when I decide to read in the middle of the night!)   On the Air, we return to where we left off if there hasn't been an alert--but to the lock screen if there has been one!
    Truly wish that Apple would give us options as to displaying the time or not--on the lock screen and on the status bar!

  • Time lag for lock screen notification sound

    My iPhone 4 (up to date) will typically flash new emails on the lock screen and then vibrate (or play a sound) about a minute later. I know this isn't a big deal, but it's frustrating, since I typically assume the vibration/sound is a new item, so I pick up the iPhone and re-check.
    Is this normal behavior?
    Thanks!

    Went to the Genius Bar and found out what the issue was. I had a few email accounts (two gmail and one godaddy related account). Apparently, gmail doesn't do push, so when iToys went to fetch, it does one gmail account, then the next and waits until it's done to make the vibration/sound. Eliminating the other accounts (I rarely use them anyway) cleared the problem.

  • Can only type password after long waiting time

    When starting my MBP I cannot type anything or click with my mouse until the login screen changes to enable shutdown etc by itself. Anyone with similar experiences and/or solutions?
    After booting, which actually takes a couple of minutes I cannot type my password (neither with external USB keyboard) or do anything at all at the log in screen. I can see the mouse cursor and move it (trackpad and magic mouse), but am unable to click anything. I need to wait for another couple of minutes until the screen changes and allows for restart, sleep and shutdown before I can click and type anything.
    In this way starting up my MBP takes ages and any advice would be more than welcome.

    Dwain Wilder wrote:
    Pondini wrote:
    Are you doing this via the Finder, or the TM "Star Wars" interface?...
    I'm finding the same problem in the TM "Star Wars" interface. In earlier versions of 10.5.8 I was able to complete this task, but not in the current one, Mac OS X 10.5.8 (9L30)
    The preferences file may be corrupt. Try a "full reset" per #A4 of the Time Machine - Troubleshooting *User Tip* at the top of this forum.
    Is this going to be addressed in an upcoming release of 10.5?
    It's very unlikely there will be any more updates to Leopard.

  • I'm having trouble downloading Mountain Lion from the app store with a long "waiting" time

    I tried to download mountain lion from the app store, but it has been in the "waiting" mode on my desktop for some time... What should I do?

    http://www.apple.com/support/mac/app-store/contact.html?form=account

Maybe you are looking for