RE: HP 6110 all-in-one paper mismatch

My 6110 HP all-in -one won't do anything but tell me that it 'needs an alignment' press 'enter'. When I press "enter' a sheet of blank paper comes out right away and the display says,"paper Mismatch". I have tried all the paper sizes listed, to no avail. I can't get the printer to do anything else. I tried reinstalling the driver disk. too, but no use. Can anyone help me with this problem??

Hello CrossBear,
Welcome to the HP Support Forums.
Regarding the HP Officejet 6110 inquires you have about the USB cable and software, I would like to help. The USB cable needs to be USB 2.0 A-B, they are not product specific.
HP Officejet 6110 All-in-One Printer Drivers is where you can download the software and drivers for your Operating System if available. This printer does not have full feature software for Windows Vista, 7 and 8 for example.
Let me know if this has helped.
Thanks,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Similar Messages

How can I use Active Print on my Ipad and print to my usb connected HP officejet 6110 all in one

I was previously able to use Active Print on my Ipod to print to my usb connected HP officejet 6110 all in one. Now, however, with my Ipad version 2 I can no longer get this to work. Can anyone help? Thanks.

Hi,
HP do not provide any USB connection solution for iOS.
As Active Print is a 3rd party application which provide this functionality, i believe you may find a better help within Active Print support as they more familier with their application requirement and functionality:
http://www.activeprint.net/support/
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Just installed HP BIOS Update. HP 6110 all in one printer no longer works.

Just installed HP BIOS Update. System no longer recognizes my printer (6110 all-in-one). HP web site says driver is in OS and should be recognized, but only driver that is close is 6100 series and it does not work.

Hey thecityhouse,
When you are selecting the driver from the available drivers list did you make sure to press the Windows Update button at the bottom right to prepopulate the list? This may have to be performed to get the proper driver for your printer.
If this does not work, then I would take a look at the information in the post found here. It may provide a workaround to the issue you are experiencing.
Hope this helps,
Jason
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

HP 6110 All-in-one not able to do anything but print?

I have just purchased a late 2013 27" iMac with OS X 10.9.2 and I'm trying to get my HP OfficeJet 6110 All-In-One printer working. The issue is that the print function works just fine, but that's it. I haven't been able to get the scanning function working at all. The HP website shows specific instructions on installing the printer via the OS but it doesn't show the ability for the other funtions other than the "Generic PCL Printer" option when I try and install the printer. Does anybody have any fixes for this?

Scan – HP in 10.9
Scan Problems HP - Mavericks

Hp 6110 all-in-one always prints in color on Windows 8

I would like to print some color documents in grayscale. But I am finding that no matter what settings I use in the Print dialog panel, my documents always come out in color. I am in Windows 8.1. For example, in Microsoft Word, if you go to File->Print, the Settings list contains options for which pages to print, one-sided or two-sided, collated, etc., but there is nothing for color vs. grayscale. So, if you then click a "Printer Properties" link, you get the detailed 6110 dialog panel with multiple tabs containing the full range of printer options. Within that, if you select the "Color" tab, you can check the "Print in Grayscale" box. Click "OK" to close the detailed printer dialog, which brings you back to the Microsoft Word printer dialog, where you can then click "Print". Document still comes out in color. I have verified a similar behavior when priting color PDF documents - there is no way to make them come out in grayscale.
I suspect the driver is also not respecting my specification to use "Fast Nornal" print quality.
So, a very clever strategy for HP to sell more ink! Can you please provide a fix?
Thanks

Hi @UsedToWorkInHPL,
Welcome to the HP Forums!
I understand that your HP Officejet 6110 all-in-one always prints in color on Windows 8. I am happy to look into this for you!
According to your printer's specifications found at this website, Printer Specifications for HP Officejet 6100 Printer Series. This printer is only supported for these Operating Systems: Windows 98, Windows 98 SE, Windows 2000, Windows Me, Microsoft(R), Windows XP.
There is no full feature software and drivers for Windows 8.1 for this printer.
One option to try and get around this, is to assign an alternate driver, please see this post, How to Assign Alternate Print Drivers in Different Versions of Windows, by @Shane_R.
Otherwise, I would recommend to please call our phone support at 800-474-6836 for your upgrade options to a printer that has the software and drivers available for Windows 8.1. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
Hope this information helps, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP 6110 All-in-One - Software availability

A friend gave me a used HP 6110 All-in-One, but did not include an installation disk or power cable. Where can I download the software? Please give me the link. Can I use any USB power connection cable or is there a product spesific transformer-type power cable available?

Hello CrossBear,
Welcome to the HP Support Forums.
Regarding the HP Officejet 6110 inquires you have about the USB cable and software, I would like to help. The USB cable needs to be USB 2.0 A-B, they are not product specific.
HP Officejet 6110 All-in-One Printer Drivers is where you can download the software and drivers for your Operating System if available. This printer does not have full feature software for Windows Vista, 7 and 8 for example.
Let me know if this has helped.
Thanks,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Driver for HP 6110 All in One Printer for MAC OS X 10.6.8

Your Search: Is the driver for HP 6110 All in One Printer the same for MAC OS X 10.6 as for MAC OS X 10.6.8?

Hi JCWG. To answer your question, Yes the driver is the same. Do you have questions about the install? Just in case you need it, here is the link to take you to the download of the software and drivers. http://goo.gl/njt723;
If you have any other questions, please feel free to write back
Thank you
Waterboy71
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

PhotoSmart3210 All in one "Paper detected does not match paper size or type selected."

All of a sudden i cannot copy any document with my 3210 All In One. I keep getting the message shown above on the screen.

Hi @nunzio317
I would like to help you with your Photosmart 3210. I understand that when you copy you see a message on the printer that says "Paper detected does not match paper size or type selected". Does this also happen when you print from the computer, or only when you copy? Have you tried copying a different size paper, and what size paper are you currently using?
Are you able to print a self test report? If you are unsure, please try, and let me know;
Load plain white paper into the tray.
Press the Setup button.
Press 1 to display the Print Report menu.
Press 1 again to select Self-Test Report. The self-test report prints.
- Source
If this also happens when you print from the computer, please use the following document as it can help you to resolve the issue; 'Paper Mismatch,' or 'Paper Size Mismatch' Error Message Displays When Printing.
I hope this helps.
- In support of Movember
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Hp officejet 6110 all in one printer wont work!!!! i need help!!!!!!!!

i turn on my printer and it says that i need to remove and check my cartridges. i did that a million times and it still says that same message. i dont know what else to do. any suggestions??? also, i dont know where to get a connection for my labtop to connect to my printer. where can i get it???

Hi,
There is not a scan driver for the 6100 for 10.6/10.7. The product was released in 2004, and reached end of life in 2008 (a year before 10.6 was released). Chances are that a driver will not be written for this product.
I don't have a 6110 here that I can test with, so all I can offer are steps that I would try given the opportunity.
One thing I noticed from your response on trying the 6210 driver was that the product (in the queue) was still showing as the 6110. I am curious as to how you went about installing using the 6210 driver. I can only think of two scenarios off the top of my head:
1) You had the 6110 installed, went to options and supplies, to the driver tab, and specified the new driver.
2) You had no products installed, and when you went to add, you specified the 6210 driver in the Print Using box prior to clicking add.
The option that is more likely to provide the scan option is option 2, so if you haven't tried it, I would encourage you to do so. If that doesn't work, try other Officejet All in one drivers, or consider upgrading if none of the above will get it to work.
I understand that the lack of a full feature driver is frustrating, but most (if not all) companies have dates in place to cut off development/support for their products. A similar scenario is the Netgear FA311 Network Interface Card. I remember using one of these cards back in 2000/2001, but if I wanted a windows vista 64-bit driver i'd be out of luck. I'd likely end up using a realtek driver (per a forum post suggestion) and see if it would work, and hope for the best.
Best of luck, I hope option 2 (if not already attempted) gets it working for you.

HP officejet j4680 all-in-one paper jam issue

I bought HP officejet j4680 all-in-one two months ago from a dealer. Now it keeps telling me a "paper jam" which doesn't exist. I tried everything from the troubleshooting in HP website. The jam light just keeps blinking. Now I am so frustrated with this product.

@CAGY, take a look at this HP link on how to clear a jam.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

HP OfficeJet All-in-One Paper Jam

I have been given to troubleshoot an OfficeJet 6210 All-in-One Printer/copier/fax machine. It suffered a paper jam for its troubles. I had cleared the jam from the machine and checked everywere else I could check freely without cracking it open. I restarted it and it gave me the same error. I finally had it do a partial reset to try and fix it. What it gave me was the same error message. Short of opening it up with a screwdriver and patience, what could potentially still keep giving me the error message after all steps have been taken to clear it and it failed?
Daniel Ray Seelye

@CAGY, take a look at this HP link on how to clear a jam.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Hp 1350 all in one "paper jam" message

I have a HP 1350 All In One Printer and I can print a test sheet but I can't print, I get a "paper jam" message. Help

Hard Reset – While printer is powered ON, pull
the power cord from the printer then from the
wall. After 30 seconds reconnect power to
wall and printer. This will trigger a ‘dirty power
up’ and restore the printer to a known good
condition (if it is possible). No user settings
are lost with a ‘hard reset’.
This ‘Hard Reset’ is one of the most powerful
tools to use when the printer hardware is not
functioning properly!
Although I am working on behalf of HP, I am speaking for myself and not for HP.
Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
Happy Troubleshooting : )

HP PSC 2355 all-in-one Paper Jam Error

Hi. I have an HP PSC 2355 all-in-one printer that has worked well for a long time but when i switched it on today to do some printing, it made some strange noises and when i tried to print it sent an error saying there was a paper jam - but there was not !
It feeds a sheet of paper in about half way through then stops and the error is displayed.
I tried doing a copy, and the exact same thing happens.
Has anyone got an idea what has gone wrong ?
Thanks.

Make sure to follow all steps here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00212225&cc=au&dlc=en&lc=en&product=422000&tmp_...
Although I am working on behalf of HP, I am speaking for myself and not for HP.
Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
Happy Troubleshooting : )

HP Officejet 5610 All-in-one paper jam problem

Please is anyone out who can heIp me.
I tried to print a word document from my computer and my printer came up with the following message: Paper jam: clear jam and press ok. I have looked through the printer to see if there is any paper jammed in the printer. I just couldn't find any. This is the first time I have experienced this paper jam problem with my printer.
On pressing the OK button resulted in the printer making some strange noise (sounding as if it is trying to pickup a paper) with the catridge mechanism sliding from one side to the other for about 10 seconds without a paper in the paper tray being picked up. It then shows the paper jam message again and again. It has been the same for the last 5 hours and I need to print some documents urgently.
I have tried all of the following troubleshooting I found on the HP website without any joy.
Step one: Remove any loose paper Remove any loose paper from the input tray.
Step two: Clear the jam from the back of the Allin-
One 1. On the rear of the product, press in the tab on the left side of the rear access
door to release the door. Pull the door away from the product to remove it. Gently pull the
paper out of the rollers. CAUTION: If the paper tears while being removed from the
rollers, check the rollers and wheels for torn pieces of paper that might have remained
inside the product. Loose pieces of paper will cause future paper jams. Replace the
rear access door. Gently push the door forward until it snaps into place. Press OK to
continue the current print job. If the issue is not resolved , continue to the next step. If
the issue is resolved , you do not need to continue to the next step. If these steps
resolved the issue , there is no need to continue troubleshooting. If the issue persists , see the next step.
Step three: Clean the rollers Turn off the unit, and then unplug the power cord. Press in the tab on
the left side of the rear clean-out door to release the door. Remove the door by
pulling it away from the unit. Wipe the paper rollers with a lint-free cloth lightly moistened
with distilled or bottled water. Rotate the rollers with your fingers to clean all the way
around. Allow the rollers to dry completely, and then replace the rear access door. Plug
the unit back in and turn it on. If these steps resolved the issue , there is no need to
continue troubleshooting. If the issue persists , see the next step.
Step four: Clear the jam from the automatic document feeder (ADF) Lift the cover of the ADF.
Lifting the ADF cover Gently pull the paper out of the rollers. CAUTION: If the paper
tears when being removed from the rollers, check the rollers and wheels for torn pieces
of paper that might be remaining inside the product. Loose pieces of paper will cause
future paper jams. Close the cover of the ADF. If these steps resolved the issue ,
there is no need to continue troubleshooting. If the issue persists , see the next step. The
next step couldn't be done because the paper is not loading.

@CAGY, take a look at this HP link on how to clear a jam.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

6110 All-in-one sometimes will not print multiple copies

I have had this problem for sometime now. I searched the forum and found the Mopier solution for laserjets, but the 6110 does not have this setting. The same question regarding the 6110 went unanswered in the only post I found for it.
I am using the 6110 on WinXP Pro and connected by USB
Often times when I try to print multiple copies of a document (MS Word or MS Works as examples) I check 2 copies in the selection box but the printer only prints one copy. I then have to click Print again. What is strange is, sometimes it performs fine and others it will not print more than one copy at a time. Sometimes it SEEMS that if I change the "collate" checkmark it works, but proper functioning does not seem to be able to be recreated every time.
I do not get any error messages, the darn thing just acts like I have 1 copy selected rahter than two. I notice that when this happens and I go to print a second copy, the dialogue box has reverted back to 1 copy, but in those few times when it DOES print 2 copies, if I go back and select Print, it still shows 2 for the number of copies.
Any ideas? Thanks in advance

Hi there,
To make sure the software side of the house is in order lets try downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

RE: HP 6110 all-in-one paper mismatch

Similar Messages

Maybe you are looking for