Re: HP Probook 4520s with wifi problems !

my name-vedant eknath ekawde
buletooth drawars download hp probook 4520s

Hello rmilepo,
Your ProBook is a Business model. Your issue would be best answered on the HP Enterprise Business Community Forum
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

Since I upgraded to Moutain Lion I'm dealing with wifi problems : no connection or random connection

Since I upgraded to Moutain Lion I'm dealing with wifi problems : no connection or random connection. With OS X Lion wifi was OK.

So, Darrall, it seems to be fixed. Mind you, this has happened through a seemingly unrelated, but hopefully replicable sequence of events. You be the judge.
I went to my other login account, which as it happens is also an admin account. Voila, the secondary click worked fine. So I returned to my primary account, where I did the following:
First, I unpaired the trackpad. then I remembered I needed something to move the mouse with, so I re-paired the magic mouse I'd had before. I thought I'd turned off the trackpad, but apparently not, so the computer re-paired it automatically. None of this had any immediate effect, as you'd imagine.
Then I went to Mission Control in Preferences. There, I deselected "Show dashboard as a space", and in the hotcorners, I deselected Mission Control from the bottom left, where it had been. I didn't replace it.
Now, my secondary click works. Uh huh. I was suspicious that it might have more to do with Mission Control and/or Dashboard than the trackpad, only because I'd beaten that horse till my arm hurt and this was all I could think of.
Never did I imagine this would get fixed short of creating a new login account and somehow copying everything - since I didn't know what was wrong, I could easily have copied the error too - so I'm very pleased and relieved. If you haven't fixed yours yet, try this. Let me know what happens!

Ios6 with wifi problems

ios6 with wifi problems

I am just updated my iphone 4 to ios6 and on Sunday it took FIVE times to update. My phone kept freezing up on me. Finally, on the fifth try I was able to get it back. I lost everything on it. Last night I checked my wifi and noticed that it was not holding the wifi password in my own home. Without the ios6 it was fine! Everytime I want to use wifi I have to enter my password. This is extremely inconvenient. Today I checked my data usage with AT&T. I am on limited 200 mb data plan per month. Today is the first day of the month for my plan. So my data begins at zero again on the first day of the new month. I checked my data usage today, and I used 17.3 mb of data in 12 hours! Because I can not use wifi! I am in the fight of my life with Apple. I want them to fix the solution NOW or they send me a new phone....no charge. Those with problems like this should spend the time to fight with them too. They are crooks! Don't let them charge for phone support either. They will rip you off.

Yet Another iPod Touch user with WIFI problem

I have Linksys WRT54GS wifi router setup at home. I use four notebooks, one mac mini and one mobile phone (Nokia N80) without any problem on my wifi network.
The only problem is with my brand new iPod Touch 16GB (firmware: 1.1.2 3B48b - no jailbreak). It always shows an error "Unable to join the network 'MY-SSID-NAME'". I have tried to change SSID, change security settings (WPA, WEP, no security, ...) - but nothing helped. All other devices (notebooks, macmini and phone) always worked like a charm.
iPod worked only once - the first time I used it (after buying). Since then it does not. I have tried all resets, Restore in iTunes, ...
I think it might be a bug in firmware. Please help someone.
BTW: How (an where) can I report a bug to Apple ?

Just like many others, I bought Ipod Touch in Christmas and felt frustrated about surfing the net. I have read many posts in the forum. And I have tried many methods suggested by others to try to figure out the problems. Finally I have solved the problem and I want to share some ideas with others.
Steps of Checking:
(1) Check whether you have a wireless network at home or at work. Check whether the network is security protected or not. If it is, better ask the admininistrator (at home, the admin should be the one who bought the wireless router.) for password.
(2) Check the latest firmware upgrade for the wireless router (in my case, I use Linksys WRT54G. After I upgraded the firmware, my ipod touch could get the necessary IP from the router.)
(3) For the wireless router, better broadcast the SSID for the first time so that the IPod Touch can find it easily. I use WPA2-Personal Encryption AES (though many buddies here point out that WEP, WPA or even no security is also okay). I even set the MAC filtering and the Ipod Touch still works fine!(though you need to input the MAC address of your Ipod Touch to the MAC filtering table in the admin page of your router. the MAC address of Ipod Touch can be found in the Ipod Touch general information. There is a string like XX:XX:XX:XX:XX:XX
(4) To mininimize the interference from neighbouring wireless networks, better try the connection near the wireless router.
(5) If you have tried for several times and failed to connect, you may reset the router by powering off for 15 seconds and reset the network configuration of the Ipod.
I have used Compag IPAQ before and I must say that for those tiny toys with Wifi capability, the connection is not that stable. However, I find that using the Ipod Touch to watch Youtube video is very good and the speed is excellent!
The steps suggested above are not exclusive. There are too many factors which influence the performance of Wifi. Hope you will succeed and enjoy the Ipod Touch in the New Year 2008!

Help with wifi problems!

so yeah...i've been having problems lately on my ipod touch's wifi cause it's connected on the internet at home ever since i bought it but after going home from an overnight at a friends house it didn't like automatically connected like it used to...so i went to the wi-fi and pressed "(name)" with no password on it and it would say "Unable to connect..blah"...i mean..what happened? I've restart my iPod Touch but still wouldn't connect...ive tried a hundred times and it wont work....

And what part of punctuation class did you miss? Seriously dude, this is difficult to understand without a comma or period somewhere.
Did your friend change his network? Add encryption? Check with him. However, you can do a simple network reset that will clear up most of these connection problems. Tap Settings > General > Reset > Reset Network Settings. When your iPod restarts, try to log in again.

2008 2.4GHz with WiFi problems

Can anyone point me to an old discussion for the wifi card on the 2008 2.4GHz MacBookPro or point me in the right direction? My wifi card keeps loosing connection and freezing my computer (black screen). All the system preferences are already set to never (computer sleep / screen sleep).
Thanks!
Model Name:          MacBook Pro
Model Identifier:          MacBookPro5,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.4 GHz
Number of Processors:          1
Total Number of Cores:          2
L2 Cache:          3 MB
Memory:          2 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          MBP51.007E.B05
SMC Version (system):          1.33f8
Serial Number (system):          W8849DC01G0

Which wireless access point or Wi-FI router are you having problems with? Maybe someone has had and fixed the problem before.
As far as making changes to the wireless setting, not easy, although you could check the Advanced settings under Network prefs, although I guess you've already seen that there isn't much to change here.

I need some help with wifi problem on iTouch gen 4

i have a problem with my wifi on itouch gen 4, it only access wifi without password but password wifi,it always shows the message "incorrect password", i tried many solutions but those seem like impossible.Please help me solve it, thanks everybody!I

u got any
i>indoor
I>Indianapolis
l>Laptop
1>one
O>on
0>zero
as any of ur pswd? it could look like anyone of them since computers dont show in regular txt's of L's and i's nc capital "i" and a "L" has the same showing> "l" "I" ya dont know from each other apart, one of them is a L and the othe is a i, not on less u look at it very carefully, u could probably tell each other apart

Fix for Cortana to those out there with Wifi problems or Cortana not connecting to the internet.

Hi,
If you are talking to Cortana and she says 'I can't connect to the Internet',Hard reset your Lumia phone.This will completely work as I had the same problem on my Lumia 530 and I hard reset it and Cortana worked fine,and she didn't say 'I can't connect to
the Internet'.
Hoped this solved your problem.

Hi Parthasarathy T,
This forum is used to discuss the questions about developing for Windows Phone, for your question please try to post it in this Windows Phone forum:
http://answers.microsoft.com/en-us/winphone .
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I'm having probook 4520s with WIN 7, Num pad issue

separate NUM PAD not working even though NUM lock was on with the O/S but during initial loging without O/S it worrks well

Which program are you using?
If all that are within the same software try a different one like cdburner or nero.
If you have already tried a different one i suggest burning an audio from a different source with the same patch of cd's.

HP Probook 4520s Memory upgrade to 8GB (2x4GB) Corsair Unsuccessful and Failed

Ok, here is the story
My notebook is HP Probook 4520s
with Windows Windows 8.1 (6.3) 64-bit (Build 9600)
Please refer to the end of this post for CPU-Z report of specs.
Currently I have 3GB of memory installed -had to install them back after upgrade failure-.
Please refer again to the CPU-Z report for the memory module specifications.
I bought the following Corsair 2x4GB memory pack
Corsair CMSO8GX3M2A1333C9 8GB (2x4GB) 1333MHz DDR3 SODIMM
http://www.scorptec.com.au/product/Memory/SODIMM/43657-CMSO8GX3M2A1333C9
Specs of new modules:
Warranty Lifetime
Size 8GB Kit (2 x 4GB)
Performance Profile none
Fan Included No
Heat Spreader—
Memory Configuration Dual Channel
Memory Type DDR3
Package - Memory Pin 204
Package - Memory Format SODIMM
Tested Voltage 1.5
SPD Voltage 1.5
Speed Rating PC3-10600 (1333MHz)
SPD Speed 1333MHz
Tested Speed 1333Mhz
Tested Latency 9-9-9-24
SPD Latency 9-9-9-24
When I installed the memory module onto the notebook, I basically couldn't go beyond the POST stage. That is the HP logo appears on the screen, and that's it.. that's it.. nothing beyond that stage.
When I went to the BIOS settings, the memory successfully read 81xxMB, this is basically 8GB of RAM.
I tried to reset BIOS settings, failed again.
I removed the 2x4GB modules, put back both original 1GB and 2GB modules -the ones that came with the notebook-, everything worked again.
What went wrong here..?
P.S. please do not reply with lame replies like "that's weird" "that's strange", I know it's weird and strange. I want specific and clear suggestions.
CPU-Z report below:
CPU-Z TXT Report
Binaries
CPU-Z version 1.69.0.x64
Processors
Number of processors 1
Number of threads 4
APICs
Processor 0
-- Core 0
-- Thread 0 0
-- Thread 1 1
-- Core 2
-- Thread 0 4
-- Thread 1 5
Timers
ACPI timer 3.580 MHz
HPET timer 14.318 MHz
Perf timer 2.208 MHz
Sys timer 1.000 KHz
BCLK timer 133.02 MHz
Processors Information
Processor 1 ID = 0
Number of cores 2 (max 8)
Number of threads 4 (max 16)
Name Intel Core i5 430M
Codename Arrandale
Specification Intel(R) Core(TM) i5 CPU M 430 @ 2.27GHz
Package (platform ID) Socket 989 rPGA (0x4)
CPUID 6.5.2
Extended CPUID 6.25
Core Stepping C2
Technology 32 nm
TDP Limit 25 Watts
Core Speed 2527.3 MHz
Multiplier x Bus Speed 19.0 x 133.0 MHz
Rated Bus speed 2394.3 MHz
Stock frequency 2266 MHz
Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, EM64T, VT-x
L1 Data cache 2 x 32 KBytes, 8-way set associative, 64-byte line size
L1 Instruction cache 2 x 32 KBytes, 4-way set associative, 64-byte line size
L2 cache 2 x 256 KBytes, 8-way set associative, 64-byte line size
L3 cache 3 MBytes, 12-way set associative, 64-byte line size
FID/VID Control yes
Turbo Mode supported, enabled
Max turbo frequency 2533 MHz
Max non-turbo ratio 17x
Max turbo ratio 19x
Max efficiency ratio 9x
TDC Limit 21 Amps
Core TDP 21 Watts
Uncore TDP 4 Watts
Power @ 9x 7 Watts
Power @ 10x 8 Watts
Power @ 11x 9 Watts
Power @ 12x 11 Watts
Power @ 13x 13 Watts
Power @ 14x 15 Watts
Power @ 15x 18 Watts
Power @ 16x 21 Watts
Power @ 17x 25 Watts
Max bus number 255
Attached device PCI device at bus 255, device 2, function 1
Chipset
Northbridge Intel Havendale/Clarkdale Host Bridge rev. 12
Southbridge Intel HM57 rev. 06
Graphic Interface PCI-Express
PCI-E Link Width x16
PCI-E Max Link Width x16
Memory Type DDR3
Memory Size 3 GBytes
Channels Dual, (Symmetric)
Memory Frequency 532.1 MHz (4:16)
CAS# latency (CL) 7.0
RAS# to CAS# delay (tRCD) 7
RAS# Precharge (tRP) 7
Cycle Time (tRAS) 20
Row Refresh Cycle Time (tRFC) 60
Command Rate (CR) 1T
MCHBAR I/O Base address 0x0FED10000
MCHBAR I/O Size 4096
MCHBAR registers
DMI
DMI BIOS
vendor Hewlett-Packard
version 68AZZ Ver. F.0F
date 02/18/2011
ROM size 2560 KB
DMI System Information
manufacturer Hewlett-Packard
product HP ProBook 4520s
version unknown
serial 2CE0211M4C
UUID {1520830E-6A57-11DF-8C36-42C05900004D}
SKU WS879EA#ABV
family 103C_5336AN
DMI Baseboard
vendor Hewlett-Packard
model 1411
revision KBC Version 57.34
serial 2CE0211M4C
DMI System Enclosure
manufacturer Hewlett-Packard
chassis type Notebook
chassis serial 2CE0211M4C
DMI Processor
manufacturer Intel(R) Corporation
model Intel(R) Core(TM) i5 CPU M 430 @ 2.27GHz
clock speed 2264.0 MHz
FSB speed 133.0 MHz
multiplier 17.0x
DMI Extension Slot
designation PCI SLOT1
type PCI
width 32 bits
populated no
DMI OEM Strings
string[0] ABS 70/71 79 7A 7B 7C
string[1] CSM v01.4A
string[2] www.hp.com
DMI Physical Memory Array
location Motherboard
usage System Memory
correction None
max capacity 8192 MBytes
max# of devices 2
DMI Memory Device
designation Top-Slot 1(top)
format SODIMM
type unknown
total width 64 bits
data width 64 bits
size 2048 MBytes
DMI Memory Device
designation Top-Slot 2(under)
format SODIMM
type unknown
total width 64 bits
data width 64 bits
size 1024 MBytes
Storage
Drive 0
Device Path \\?\scsi#disk&ven_&prod_st9320423as#4&1f4bc32b&0&000000#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
Type Fixed
Name ST9320423AS
Capacity 298.1 GB
SMART Support Yes
USB Devices
USB Device Generic USB Hub, class="0x09", subclass=0x00, vendor=0x8087, product=0x0020
USB Device USB Composite Device, class="0xEF", subclass=0x02, vendor=0x0461, product=0x4DB6
USB Device Generic USB Hub, class="0x09", subclass=0x00, vendor=0x8087, product=0x0020
USB Device Microsoft Mouse and Keyboard Detection Driver (USB), class="0x00", subclass=0x00, vendor=0x045E, product=0x0745
Graphics
Number of adapters 1
Graphic APIs
API ATI I/O
Display Adapters
Display adapter 0
Name ATI Mobility Radeon HD 4500 Series (Microsoft Corporation - WDDM v1.1)
Board Manufacturer 0x103C (0x1411)
Memory size 512 MB
PCI device bus 1 (0x1), device 0 (0x0), function 0 (0x0)
Vendor ID 0x1002 (0x103C)
Model ID 0x9555 (0x1411)
Performance Level 0
Win32_VideoController AdapterRAM = 0x20000000 (536870912)
Win32_VideoController DriverVersion = 8.97.10.6
Win32_VideoController DriverDate = 06/20/2012
Software
Windows Version Microsoft Windows 8.1 (6.3) 64-bit (Build 9600)
DirectX Version 11.0
This question was solved.
View Solution.

Specific and clear. Your laptop uses 1.35 volt memory and you installed 1.5 volt.
Here is the crucial page for the memory you need:
http://www.crucial.com/store/listparts.aspx?model=ProBook%204520s
If this is "the Answer" please click "Accept as Solution" to help others find it.

Recovery Partition won't engage at boot from F11 after stock Win7 install - Probook 4520s

Notebook: HP Probook 4520s (with Energy Star sticker)
OS: Windows 7 32-bit
Error: Nothing happens when pressing F11 at boot
Pre-issue changes: Installed Windows 7 from stock Windows 7 disc
I'm a PC Technician with quite a few years behind me, but this got me at a standstill even after a day of searching online for solutions.
A friend bought a ProBook 4520s where the previous owner, just before selling it, installed Windows 7 from a stock Windows 7 disc from Microsoft (I guess to sell it with a 'clean' OS), which of course ened up bare without drivers, etc.
When the install was done though, he/she didn't destroy the HP partitioning (ie, the partitions remained: SYSTEM, OS (c:\), HP_RECOVERY, HP_TOOLS). Those partitions seem intact, so I'm trying to perform an HP Recovery to bring the computer back to factory settings.
When rebooting, I'm prompted to press 'esc' for options, which I do, then it prompts 'F11' for HP Recovery. When I press F11, it just boots the Windows 7 OS as normal. From what I've managed to gather via searching, I believe something was disturbed on the HP_RECOVERY partition, like the MBR, or something, possibly by the previous user making the HP_RECOVERY partition active, then selecting "Repair Windows" on the Windows disc.
Solutions I've tried include:
Pressing ESC -> F11 at boot [simply boots as usual].
Setting the HP_RECOVERY partition to 'active' from Disc Management, then rebooting [simply boots as usual].
Installing "Enhanced HP Backup and Recovery Manager for Microsoft Vista" (sp38131.exe) [when run and PC Recovery is selected, it says there is no recovery partition and asks for discs].
Installing "Fix for HP Multi-Partition Recovery Manager" from (sp48415.exe) suggest in the 'green post' here [no change].
Installing "Recovery Manager Installer Patch for Microsoft Windows 7 Upgrade" (sp45823.exe) [no change].
Installing "HP Recovery Manager for Microsoft Windows 7" (sp45602.exe) [no change].
I live far from having access to buying Recovery DVDs from HP, so need a solution to fix this, please. At most, I can download.
The OS in the Recovery, I expect is Windows 7, because there's a Windows 7 sticker on the notebook.
This question was solved.
View Solution.

Hi:
There isn't anything you can do to get the recovery partition to work once someone removed the HP install with the recovery manager program, which is not available for download.
You will need to order a set of recovery disks by calling 1-800-334-5144.
You will need to provide the model # and serial number for the PC to the customer services rep.
Cost is $10.
If you do not want to bear the expense, then you can make your own W7 installation disk.
If you can read the 25 character Microsoft windows 7 product key, you can download plain Windows 7 ISO files to burn to a DVD for the version of windows that came installed on your PC, and that is listed on the Microsoft COA sticker on your PC's case.
Burn the ISO using the Burn ISO option on your DVD burning program and burn at the slowest possible speed your program will allow. This will create a bootable DVD.
Use the 25 character product key on the PC to activate the installation.
The key will activate either a 32 or 64 bit installation.
Then go to the PC's support and driver page to install the drivers you need.
Link to the W7 ISO file downloads is below.
http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/
Paul

HELP!!!! problem with motherboard HP Probook 4520s , need replacement, where can i buy it??

HELP!!!! problem with motherboard HP Probook 4520s , need replacement, where can i buy it??

bumer_v
You can buy by HP PartSurfer or her
Say thanks by clicking the "Kudos! Star" which is on the left.
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

I have a problem with wifi in my iphone 4s, i already try everything and download latest version 7.1(11D167) but wifi switch is not working, its my humble request to Apple support team that pls resolve this problem as soon as possible because

I have a problem with wifi in my iphone 4s, i already try everything and download latest version 7.1(11D167) but wifi switch is not working, its my humble request to Apple support team that pls resolve this problem as soon as possible because its a prestiage of Apple Company.
Pls inform me how can i resolve the problem of wifi.

You have to go to autherized iPhone agent.

I have problem with wifi in my ipad3

My wifi is so slow , i download from app store by wifi and it takealong time .

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Problem with WIFI in Ipod touch

Hello, I have a problem just today, the day before ipod touch worked fine. Today I want to download some app. and then when I click on app button the screen show Loading... and just a few second it said
*"cannot retrieve download information. please connect with iTunes"* when I click ok it, it pop another pop up and said *"cannot connect to itunes Store"*
Then I try to open some website on Safari and it keep Loading forever and said
*"Safari can't open the page because the server stopped responding"* and sometime
*"Safari can't open the page because it can't find the server"*
I always connect my ipod with WIFI at home and right now my mom and my laptop are working fine through WIFI.
I try everyting that I know . . restart my ipod , reset my ipod, reset my WIFI setting and router, plug my ipod to iTunes and let it Sync . . and also. . . WIFI Networks in Ipod show all the number . . IP Adress, Subnet,Royter,DNS . .
and now I dont know what else Ican do.
(actually my English is not good , sorry about tha I've try my best to describe the problem.)
thank you
Message was edited by: foniixz
null
Message was edited by: foniixz

Hi Josh asks!
I have an article here that can help you troubleshoot this issue with your Wi-Fi connections on your iOS device:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Thanks for using the Apple Support Communities!
Cheers,
Braden

Re: HP Probook 4520s with wifi problems !

Similar Messages

Maybe you are looking for