RE:HR-ABAP selection screen problem.

hi,
hi friends iam facing one problem regarding hr ABAP selection screen ,in my program iam using PNP LDB for bonus details report
i have using selection screen declaration present for single selection.
SELECTION-SCREEN BEGIN OF BLOCK B3 WITH FRAME TITLE TEXT-006.
SELECT-OPTIONS: S_ABKRS FOR P0001-ABKRS NO INTERVALS NO-EXTENSION,
                S_WERKS FOR P0001-WERKS NO INTERVALS NO-EXTENSION,
                S_BTRTL FOR P0001-BTRTL NO INTERVALS NO-EXTENSION,
                S_PERSG FOR P0001-PERSG NO INTERVALS NO-EXTENSION,
                S_PERSK FOR P0001-PERSK NO INTERVALS NO-EXTENSION.
SELECTION-SCREEN END OF BLOCK B3.
based on this selection iam fetching the information from infotypes using macros.
now my requirement is iam fetch the information for multiple selections means like payroll areas z1,z2 and z3 payroll informations
should be fetching once. pls any body knows solution please give me reply.
thanks & regards,
mgrao.

You should be using a selection view (HR Report Category in the programs attributes) to filter results from the LDB.
Why is this in the objects forum?

Similar Messages

RE:pnp LDB selection screen problem

hi,
hi friends iam facing one problem regarding hr ABAP selection screen ,in my program iam using PNP LDB for bonus details report
i have using selection screen declaration present for single selection.
SELECTION-SCREEN BEGIN OF BLOCK B3 WITH FRAME TITLE TEXT-006.
SELECT-OPTIONS: S_ABKRS FOR P0001-ABKRS NO INTERVALS NO-EXTENSION,
S_WERKS FOR P0001-WERKS NO INTERVALS NO-EXTENSION,
S_BTRTL FOR P0001-BTRTL NO INTERVALS NO-EXTENSION,
S_PERSG FOR P0001-PERSG NO INTERVALS NO-EXTENSION,
S_PERSK FOR P0001-PERSK NO INTERVALS NO-EXTENSION.
SELECTION-SCREEN END OF BLOCK B3.
based on this selection iam fetching the information from infotypes using macros.
now my requirement is iam fetch the information for multiple selections means like payroll areas z1,z2 and z3 payroll informations
should be fetching once. pls any body knows solution please give me reply.
thanks & regards,
mgrao.

hi jain thanks for your reply, iam already created report category and assigned my report. here iam giving my report selection
declerations fully   below.
      S E L E C T I O N       S C R E E N                           *
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001. " DECLEARED REPORT CODE LEVEL
SELECT-OPTIONS: S_DATE   FOR SY-DATUM NO-EXTENSION.    "Bonus for Financial Year
PARAMETERS:     P_BDATE TYPE SY-DATUM OBLIGATORY,     "Bous payed as on
                P_WKDAYS TYPE CHAR6.                                            "No.of Working Days
SELECTION-SCREEN END OF BLOCK B1.
*SELECTION-SCREEN BEGIN OF BLOCK B3 WITH FRAME TITLE TEXT-006.    " COMMENTED report level TAKING FROM LDB PNP
*SELECT-OPTIONS: S_ABKRS FOR P0001-ABKRS NO INTERVALS NO-EXTENSION,     " Payroll area
               S_WERKS FOR P0001-WERKS NO INTERVALS NO-EXTENSION,                       Personnel area
               S_BTRTL FOR P0001-BTRTL NO INTERVALS NO-EXTENSION,                          Personnel sub area
               S_PERSG FOR P0001-PERSG NO INTERVALS NO-EXTENSION,
               S_PERSK FOR P0001-PERSK NO INTERVALS NO-EXTENSION.
*SELECTION-SCREEN END OF BLOCK B3.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-002. "REPORT CODE LEVEL SELECTION
PARAMETERS: P_FORMCP TYPE PIN_RATE, " char6,    "Form C %
            P_FORMEP TYPE PIN_RATE, " char6,                 "Exgratia %
            P_FORMBP TYPE PIN_RATE. " char6 .               "Bonus %
SELECTION-SCREEN END OF BLOCK B2.
SELECTION-SCREEN BEGIN OF BLOCK B4 WITH FRAME TITLE TEXT-004.
PARAMETERS: L_REPORT TYPE ZHRD_FORMC AS LISTBOX VISIBLE LENGTH 40 OBLIGATORY . Report for list box   1 form c
SELECTION-SCREEN END OF BLOCK B4.                                                                                2 exgratia
the above selection is iam used first, now iam commented BLOCK B3 SELECTION PARAMETERS and taking the parameters from REPORT CATEGORY ASSINGN MENT.
MY PROBLEM is if i select one payroll area example z1 it showing all pay roll employees bonus details it is not filter the remaining payroll areas my requirement is what are the payrolls iam selecting those pay roll area details only displaying.
data fetching from INFOTYPES 0001,0002,0021 AND 9150 FOR BONUS DETAILS and out put is classical report format.
please kindly give the reply if you knows the solution.
thanks & regards ,
mgr.

Upload from clipboard option in webdynpro abap selection screen

Hello Gurus,
We have a requirement in select-options in webdynpro.i have implimented select-options successfully using
WDR_SELECT_OPTIONS used component.now i need to impliment 'upload from clipboard' option when ever i click on advance options arrow mark. this option we can get in normal abp from selection screen.in selection screen against select-option field we have multiple options arrow mark.when ever we click this arrow mark we can able to see the upload from clipboard button at lowe level.exact same option how can we impliment in webdynpro abap selection screen.
Could anyone please suggest solutions?
if possible could you send me the sample code or relevent links for the same.
Thanks in Advance for your replies.
Regards,
babu

Hi,
Which server version are you working on...Is it ECC6 or nwetweaver 7..
I guess that option is avaialbel in Netweaver 7.0..Need to check there is an option for Clipboard in select-options..
Regards,
Lekha.

How to add factory calender in ABAP Selection Screen?

Hi,
Anyone can guide me, how to add the factory or Holiday calender in ABAP Selection screen?
Thanks in advance.
VJ.

Use the below code and it should work.
AT SELECTION-SCREEN on VALUE-REQUEST FOR p_date. "p_date is your selection screen field.
   CALL FUNCTION 'F4_DATE'
    EXPORTING
      DATE_FOR_FIRST_MONTH               = SY-DATUM
      DISPLAY                                           = ' '
      FACTORY_CALENDAR_ID                = 'US'
      HOLIDAY_CALENDAR_ID                = 'US'
    IMPORTING
      SELECT_DATE                        = p_date
The thing to note above is DISPLAY should NOT be 'X'.

Standard PNP selection screen problem in reason for action type

Hi all,
We have used standard PNP in one of our report program.
The input for 'Reason for Action' (excluding a particular reason for action ) has no effect on the actual selection of data from the PNP. i.e. even if a particular reason for action is excluded in the selection, record pertaining to that action for reason is still picked in the PNP selection and passed on to the program through Get PERNR statement.
The above problem seems to affect all the standard and custom HR Reports as well.
Please advise on how exactly the excluding of a particular reason for action work in selection through PNP and is there anyway to solve the problem.
eagerly waiting for your response.
Thanking You,
Regards.
Deepak

Thanks for your response,
We tried but it did not work.
Our code is as follows,
INITIALIZATION.
W_REPID = SY-REPID.
PERFORM CREATE_RANGES.
START-OF-SELECTION.
GET PERNR.
RP-PROVIDE-FROM-LAST P0000 SPACE PN-BEGDA PN-ENDDA.
PERFORM GET_DATA.
END-OF-SELECTION
If you could give us your email id, we would email the screen shots of the selection screen and the output.
my email id - [email protected]
Thanking You,
Regards
Deepak

Two selection screen problem in one report

i have a two selection screens 1000 & 2000 in single report , which needs to be executed one after the other ,
the problem is when i execute second selection screen(2000) , the cursor is going back to at-selection-screen once again.
but i need to trigger start-of-selection directly after executing second selection screen,
the first selection screen 1000 will be executed with the help of select options..
the sample code is below .
at-selection-screen.
    perform validations.
   call selection screen 2000.
    at selection screen on value request p_adm
start-of-selection.
   main logic

Moderator message - Cross post locked
Rob

Abap selection-screen

Hi friends,
Is it possible in abap reporting, from the first selection-screen input can we design the next screen where we can provide the details for first screen inputs.
note: this should be done in abap report not module pool.
Advance Thanks,
Purna Chandra.

Go through this small example -
parameters : p_so type vbak-vbeln.
types: begin of w_itab_ty,
        vbeln type vbeln,
        vkorg type vkorg,
       end of w_itab_ty.
data : itab type standard table of w_itab_ty,
       wa_itab type w_itab_ty.
DATA it_dynfield TYPE STANDARD TABLE OF dynpread WITH HEADER LINE.
AT SELECTION-SCREEN.
if p_so is not initial.
    CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname               = sy-repid
      dynumb               = sy-dynnr
      request              = 'A'
      translate_to_upper   = 'X'
    TABLES
      dynpfields           = it_dynfield
    EXCEPTIONS
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      invalid_parameter    = 7
      undefind_error       = 8
      double_conversion    = 9
      stepl_not_found      = 10
      OTHERS               = 11.
READ TABLE it_dynfield WITH KEY fieldname = 'P_SO'.
IF it_dynfield-fieldvalue IS NOT INITIAL.
    p_so = it_dynfield-fieldvalue.
ENDIF.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        input         = p_so
     IMPORTING
       OUTPUT        = p_so.
select vbeln
         vkorg
         from vbak
         into table itab
         where vbeln = p_so.
endif.
start-of-selection.
   if itab is not initial.
    loop at itab into wa_itab.
       write :/ wa_itab-vbeln,
                wa_itab-vkorg.
     endloop.
   endif.

At selection-screen problem: triggering an error message...

Hello experts,
I have 3 radiobuttons and 1 parameter in my selection screen. it works in such a way that whenever the user clicks on the 3rd radiobutton the parameter will be inputtable. Now, what I want to do is that whenever the 3rd radiobutton is clicked and the user forgot to put a value in the paramater an error message will be triggered saying 'please put a value'.
Now, creating a code for that is easy but here is the problem: whenever I click on any of the radiobuttons the message triggers. Anyway, below is my code:
SELECTION-SCREEN BEGIN OF BLOCK box1 WITH FRAME TITLE text-001.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pr_upld RADIOBUTTON GROUP grp MODIF ID id3
                                          USER-COMMAND ucomm.
SELECTION-SCREEN COMMENT 2(20) text-007 FOR FIELD pr_upld.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 03(15) text-a11 FOR FIELD p_flnme MODIF ID id3.
PARAMETERS: p_flnme LIKE rlgrap-filename DEFAULT 'C:\' MODIF ID id3.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(22) text-002 FOR FIELD p_dcode MODIF ID id1.
PARAMETERS: p_dcode LIKE vbak-kunnr MODIF ID id1,
            p_name1 LIKE kna1-name1 MODIF ID id1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pr_list RADIOBUTTON GROUP grp MODIF ID id4.
SELECTION-SCREEN COMMENT 2(7) text-003 FOR FIELD pr_list MODIF ID id4.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pr_add RADIOBUTTON GROUP grp MODIF ID id2.
SELECTION-SCREEN COMMENT 2(3) text-005 FOR FIELD pr_add MODIF ID id2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pr_edit RADIOBUTTON GROUP grp MODIF ID id5.
SELECTION-SCREEN COMMENT 2(4) text-006 FOR FIELD pr_edit MODIF ID id5.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 03(20) text-a12 FOR FIELD p_code MODIF ID id2.
*PARAMETERS: p_kunnr LIKE zts0001-kunnr.
PARAMETERS: p_code LIKE zts0001-cdseq MODIF ID id6.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK box1.
AT SELECTION-SCREEN OUTPUT.
IF v_compflag EQ space.
    LOOP AT SCREEN.
      IF screen-group1      = 'ID1'.
        screen-input        = '0'.
        screen-output       = '1'.
        MODIFY SCREEN.
      ELSEIF screen-group1 = 'ID2'.
        screen-active       = '1'.
        MODIFY SCREEN.
      ELSEIF screen-group1 = 'ID3'.
        screen-active       = '0'.
        MODIFY SCREEN.
      ELSEIF screen-group1 = 'ID4'.
        screen-active       = '1'.
        MODIFY SCREEN.
      ELSEIF screen-group1 = 'ID5'.
        screen-active       = '1'.
        MODIFY SCREEN.
      ELSEIF screen-group1 = 'ID6'.
        screen-active       = '1'.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ELSEIF v_compflag NE space.
    LOOP AT SCREEN.
      IF screen-group1      = 'ID1'.
        screen-active       = '0'.
        MODIFY SCREEN.
      ELSEIF screen-group1 = 'ID2'.
        screen-active       = '0'.
        MODIFY SCREEN.
      ELSEIF screen-group1 = 'ID3'.
        screen-active       = '1'.
        MODIFY SCREEN.
      ELSEIF screen-group1 = 'ID4'.
        screen-active       = '1'.
        MODIFY SCREEN.
      ELSEIF screen-group1 = 'ID5'.
        screen-active       = '0'.
        MODIFY SCREEN.
      ELSEIF screen-group1 = 'ID6'.
        screen-active       = '0'.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ENDIF.
*for users that are not controllers
LOOP AT SCREEN.
    IF screen-name   = 'P_CODE'.
      screen-input   = '0'.
    ENDIF.
    MODIFY SCREEN.
ENDLOOP.
IF pr_list = 'X' OR
     pr_add = 'X' OR
     pr_upld = 'X'.
    LOOP AT SCREEN.
      IF screen-group1   = 'ID6'.
        screen-input     = '0'.
      ENDIF.
      MODIFY SCREEN.
    ENDLOOP.
ELSEIF pr_edit = 'X'.
    LOOP AT SCREEN.
      IF screen-group1   = 'ID6'.
        screen-input     = '1'.
      ENDIF.
      MODIFY SCREEN.
    ENDLOOP.
ENDIF.
*for controllers
IF pr_upld = 'X'.
    LOOP AT SCREEN.
      IF screen-name      = 'P_FLNME'.
        screen-input     = '1'.
      ENDIF.
      MODIFY SCREEN.
    ENDLOOP.
ELSEIF pr_list = 'X'.
    LOOP AT SCREEN.
      IF screen-name      = 'P_FLNME'.
        screen-input     = '0'.
      ENDIF.
      MODIFY SCREEN.
    ENDLOOP.
ENDIF.
AT SELECTION-SCREEN.
IF pr_edit = 'X' AND p_code IS INITIAL.
    MESSAGE e008 WITH 'Please specify Code.'.
ENDIF.
Again, thank you guys and have a nice day!

Hi viraylab,
1. Such validations can be handled in the event
   START-OF-SELECTION.
2. We should them and other such validations,
   using this logic
START-OF-SELECTION.
IF ERRORCONDIDTION.
<b>MESSAGE 'PLEASE ENTER ' TYPE 'S'
LEAVE LIST-PROCESSING.</b>
ENDIF.
WRITE :/ 'ABC'.
3.
The most important statements are
A) message should be of type I, or S, or W
   (and not error E)
b) LEAVE LIST-PROCESSING
(it discontinues the further list showing,
   and again, re-displays, the selection screen)
regards,
amit m.

SELECTION-SCREEN problem

[Background:]
(1)There are two parameters in a radio button group.
    One is P_SCREEN,it means display report on screen
   and another is P_FILE,it means output report into a file.
(2)There is a parameter P_NTFILE, use it to indicate output file path.
[Target:]
(1)After the selection-screen built,
   If the P_FILE is checked,P_NTFILE should be enable.
   If the P_SCREEN is checked,P_NTFILE should be disable.
[Code:]
Parameter in Block2
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: P_SCREEN RADIOBUTTON GROUP R1. " Screen output
SELECTION-SCREEN COMMENT 04(21) TEXT-001.
SELECTION-SCREEN POSITION 32.
PARAMETERS: P_FILE RADIOBUTTON GROUP R1. " NTFILE output
SELECTION-SCREEN COMMENT 35(17) TEXT-002.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK B2.
Parameter in Block3
SELECTION-SCREEN BEGIN OF BLOCK B3 WITH FRAME.
PARAMETERS: P_NTFILE(45) TYPE C LOWER CASE OBLIGATORY MODIF ID SC1.
P_PCFILE      LIKE RLGRAP-FILENAME OBLIGATORY.
SELECTION-SCREEN END   OF BLOCK B3.
*&      AT SELECTION-SCREE
AT SELECTION-SCREEN.
IF P_SCREEN = 'X'.
    FLAG = 0.
ENDIF.
IF P_FILE = 'X'.
    FLAG = 1.
ENDIF.
*&      AT SELECTION-SCREE ON <FIELD>
AT SELECTION-SCREEN ON RADIOBUTTON GROUP R1.
IF P_SCREEN = 'X'.
    LOOP AT SCREEN.
      IF SCREEN-GROUP1 = 'SC1'.
        SCREEN-INPUT = FLAG.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ENDIF.
IF P_FILE = 'X'.
    LOOP AT SCREEN.
      IF SCREEN-GROUP1 = 'SC1'.
        SCREEN-INPUT = FLAG.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ENDIF.
[Problem:]
P_NTFILE can not refresh between enable and disable status.
Anyone can help me?

*& Report Z_JAGANOBJECT                                               *
REPORT Z_JAGANOBJECT line-count 0(1)                          .
Tables sscrfields.
*--parameters--
        SELECTION-SCREEN BEGIN OF BLOCK RB1 WITH FRAME TITLE new.
        selection-screen :skip 2.
            PARAMETERS : cmp_name(10) type c,
                         imp_code(5) type n,
                         exp_cmp(10) TYPE c,
                         Exp_mtrl(10) TYPE c.
------------------------radi button---------------------
           SELECTION-SCREEN BEGIN OF BLOCK RB WITH FRAME TITLE text.
           selection-screen: skip 1.
             PARAMETERS : Import RADIOBUTTON GROUP RB user-command usr,
                          Export RADIOBUTTON GROUP RB DEFAULT 'X'.
           SELECTION-SCREEN END OF BLOCK RB.
           SELECTION-SCREEN END OF BLOCK RB1.
*--push button--
SELECTION-SCREEN PUSHBUTTON /40(20) SAVE USER-COMMAND STORE.
DATA : FLAG TYPE I.
*--internal tables--
data :    begin of itab occurs 0,
             cmp_name(10) type c,
             imp_code(5) type n,
          end of itab.
data :    begin of itab1 occurs 0,
             exp_cmp(10) TYPE c,
             Exp_mtrl(10) TYPE c,
          end of itab1.
*--initalisaton--
INITIALIZATION.
save = 'store'.
text = ' Type '.
new = ' Import- Export details'.
*--selection screen--
AT SELECTION-SCREEN.
      case SSCRFIELDS-ucomm.
           when 'STORE'.
           FLAG = '1'.
                if import = 'X'.
                   itab-cmp_name = cmp_name.
                   itab-imp_code = imp_code.
            append itab.
            clear itab.
            endif.
                if export = 'X'.
                   itab1-exp_cmp = exp_cmp.
                   itab1-Exp_mtrl = Exp_mtrl.
           append itab1.
           clear itab1.
           endif.
           ENDcase.
*--selection screen output--
AT SELECTION-SCREEN OUTPUT.
IF export = 'X'.
   LOOP AT SCREEN.
      IF SCREEN-NAME = 'CMP_NAME' OR SCREEN-NAME = 'IMP_CODE'.
        SCREEN-INPUT = '0'.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
   elseIF import = 'X'.
    LOOP AT SCREEN.
      IF SCREEN-NAME = 'EXP_CMP' OR SCREEN-NAME = 'EXP_MTRL'.
        SCREEN-INPUT = '0'.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ENDIF.
end-of-selection.
LOOP AT ITAB.
WRITE : /10 itab-cmp_name, 30 itab-imp_code.
ENDLOOP.
LOOP AT ITAB1.
WRITE : /10 itab1-exp_cmp,50 itab1-exp_mtrl.
ENDLOOP.
hope its useful,
reward points if its useful
regards
vijay

Selection Screen problem Urgent ...

Please find below ; It doesn't care of selection screen .For example I want to take all material mtart is 'abc' . How can I build that .For example there is one record instead of mtart (abc ) but when I enter bcd it also get something.
SELECT * FROM mbew
     WHERE matnr in s_matnr
     AND bwkey IN s_bwkey.
    ytab-matnr = mbew-matnr .
    ytab-kaln1 = mbew-kaln1 .
    SELECT SINGLE * FROM makt
    WHERE matnr = ytab-matnr.
    ytab-maktx = makt-maktx .
    SELECT SINGLE * FROM mara
             WHERE matnr = ytab-matnr
          AND matkl IN s_matkl
            AND mtart IN s_mtart.
    ytab-matkl = mara-matkl .
    ytab-mtart = mara-mtart .
    SELECT SINGLE * FROM mvke
    WHERE matnr = ytab-matnr
    AND kondm IN s_kondm .
    ytab-kondm = mvke-kondm .
    SELECT SINGLE * FROM ckmlcr
    WHERE kalnr = ytab-kaln1
    AND bdatj EQ s_bdatj
    AND curtp EQ s_curtp.
    ytab-kalnr = ckmlcr-kalnr .
    ytab-bdatj = ckmlcr-bdatj .
    ytab-curtp = ckmlcr-curtp .
    SELECT SINGLE * FROM vbrp
              WHERE matnr = ytab-matnr.
    ytab-vbeln = vbrp-vbeln .
    ytab-fbuda = vbrp-fbuda .
    ytab-posnr = vbrp-posnr .
    ytab-fkimg = vbrp-fkimg .
    ytab-netwr = vbrp-netwr .
APPEND ytab.
    CLEAR ytab.
ENDSELECT.
Message was edited by:
        yusuf tunay çilesiz

Hi,
The code looks good..Explain your problem clearly..
What ever you give in the selection screen is not getting filtered..??
AFter this select check for sy-subrc..
SELECT SINGLE * FROM mara
WHERE matnr = ytab-matnr
AND matkl IN s_matkl
AND mtart IN s_mtart.
IF SY-SUBRC <> 0.
if you want to skip the record if there is no material found for the corresponding
material, matkl and mtart...use CONTINUE..Which will process the next record in the MBEW select..
CONTINUE.
ENDIF.
Thanks,
Naren

Selection screen problem in module pool

Hi friends,
I am working on module pool programming, I need to put select screen on the screen of the module pool porgramming. I used Input/Output field to do that and activated. But I am getting message invalid field format (screen error) can any one tell me why I am not able to run the seletion screen when I am using input/output field, also please let me know how to solve this problem.
Regards,
Line

Hello,
Think that this is useful for u/
SELECTION-SCREEN - Defining selection screens
Variants:
1a. SELECTION-SCREEN BEGIN OF SCREEN scr.
1b. SELECTION-SCREEN END OF SCREEN scr.
2. SELECTION-SCREEN BEGIN OF SCREEN scr AS SUBSCREEN.
Effect
Defines a selection screen with the number scr. scr may be up to 4 digits.
SELECTION-SCREEN BEGIN OF SCREEN scr.
Additions:
(zu SELECTION-SCREEN BEGIN OF SCREEN scr) 1. ... TITLE title
2. ... AS WINDOW
Notes
In reports (type 1 programs), a selection screen with number 1000 is created automatically when you use the SELECT-OPTIONS, PARAMETERS and SELECTION-SCREEN statments. This selection screen appears when you SUBMIT the report.
In any type of program (apart from subroutine pools - type S), you can define further selection screens using SELECT-OPTIONS, PARAMETERS and SELECTION-SCREEN. You enclose these statements between the SELECTION-SCREEN BEGIN OF SCREEN and SELECTION-SCREEN END OF SCREEN statements.
You call these screens using the CALL SELECTION-SCREEN statement.
Screen number 1000 is not allowed (reserved for standard selection screen).
When you generate the program, all user-defined selection screens are also generated.
Within a report (type 1 program), all SELECT-OPTIONS, PARAMETERS and SELECTION-SCREEN statements outside a SELECTION-SCREEN BEGIN/END OF SCREEN block form part of selection screen 100 (standard selection screen)
Regards,
LIJO JOHN.

Query selection screen problem

Dear all,
We have turnover per companycode report in our portal. When the selection screen appear for the query I tried to press f4 help to get the list for Supplier. But this not getting displayed. Can you please let me know the reason why this happens ?
For all the remaining field selection i could get the list except the supplier field.
I also tried checking the master data and SID table for supplier. they have data in the table.
Please let me know the problem & from wher the data is retrieved when we process f4 help.
Thankyou!
Bala

Hello there,
There are settings at info object level and Query designer level. At info object level for the characteristic, go to the tab Business Explorer and check the settings for the Query filter value. Similarly check the settings for the characteristics which show values for f4 help.
Also there is a similar setting for the info object at query designer level with similar names in the properties pane of the characteristic.
Check them and set it accordingly.
Regards
Joga

Tabbed selection screen problem.

Hi expert,
I need some help in creating my selection screen.
Right now i'm creating a tabbed selection screen as the code below follows.
PARAMETERS: p_test AS CHECKBOX USER-COMMAND testrun DEFAULT 'X'.
SELECTION-SCREEN BEGIN OF SCREEN 100 AS SUBSCREEN.
PARAMETERS: p_offkdt TYPE sy-datum MODIF ID thr.
SELECT-OPTIONS: s_konfe FOR p0002-konfe.
SELECTION-SCREEN END OF SCREEN 100.
SELECTION-SCREEN BEGIN OF SCREEN 200 AS SUBSCREEN.
SELECTION-SCREEN: BEGIN OF LINE,
                   COMMENT 1(20) text-005 MODIF ID yea
                    FOR FIELD p_lowdt,
                    POSITION POS_LOW.
PARAMETERS: p_lowdt TYPE begda MODIF ID yea,
            p_updt TYPE endda MODIF ID yea.
SELECTION-SCREEN: END OF LINE.
PARAMETERS: p_keydt TYPE dats MODIF ID yea.
SELECTION-SCREEN END OF SCREEN 200.
SELECTION-SCREEN BEGIN OF SCREEN 300 AS SUBSCREEN.
PARAMETERS: p_lvdat TYPE dats MODIF ID lv.
SELECTION-SCREEN END OF SCREEN 300.
SELECTION-SCREEN: BEGIN OF TABBED BLOCK prog_selection FOR 4 LINES,
                  TAB (20) button1 USER-COMMAND push1,
                  TAB (20) button2 USER-COMMAND push2,
                  TAB (20) button3 USER-COMMAND push3,
                  END OF BLOCK prog_selection.
Now as I'm using tab and subscreen, therefore i need to initialize the subscreen which i wanted to use which i did in the initialization event.
prog_selection-dynnr = 100.
prog_selection-activetab = 'PUSH1'.
With the above code, my default tab would be screen 100 which is the first tab.
My problem right now is, after i execute the program, and then i press the back button to go back to the selection screen, the default tab 100 is shown again while i wanted to show the last tab which was picked before the program was executed. Please kindly advise how can i solve this problem.
Many Thanks!
-Suwardi Nursalim-

Hi,
DATA: V_DYNNR TYPE SY-DYNNR VALUE '0100',
           V_ACTIVETAB(4).
INITIALIZATION.
MOVE 'PUSH1' TO V_ACTIVETAB.
AT SELECTION-SCREEN OUTPUT.
prog_selection-dynnr = V_DYNNR.
prog_selection-activetab = V_ACTIVETAB.
When the user clicks each tab of the tab strip.*
CASE SY-UCOMM.
   WHEN 'PUSH1'.
        V_ACTIVETAB = 'PUSH1'.
        (rest of your code).
   WHEN 'PUSH2'.
        V_ACTIVETAB = 'PUSH2'.
        (rest of your code).
   WHEN 'PUSH3'.
        V_ACTIVETAB = 'PUSH3'.
        (rest of your code).
ENDCASE.
Hope this will help you.
Regards,
Smart Varghese

Selection-screen problem:need to go back to selectionscreen not source code

Hello experts,
Please help me on my dillema. I have 2 reports, zreport1 and zreport2. Now, zreport1 submits
values via selection-screen to zreport2. Now here is the problem, when I press 'BACK' on the
selection-screen of zreport2(rememeber we used submit statement via selection-screen on zreport1)
instead of going back to the selection-screen of zreport1 it goes to the source code of zreport1 which
is wrong. And there are 2 selection-screens on zreport1 depending on the user if he is controller or not.
So what I need to do here is that whenever I press 'BACK' either I'm adding or modifying or displaying records
it should go back to whatever screen I called in zreport1.
Here's a diagram.
ZREPORT1**
if v_controller = 'X'
    display selection-screen 1500
else
    display selection-screen 500
endif.
if user wants to add records, submit values from zreport1 to zreport2
and return via selection-screen.
*same goes for edit option.
if user wants to display, get all records then display in ALV.
ZREPORT2**
So lets assume user decides not to add records and decides to go back. so he presses
the BACK button in selection-screen of zreport2. Now here's the nasty part, instead of going back to either
selection-screen 500 or 1500 in zreport1, it goes to the source code of zreport1!. I hope I explained it clearly.
Again, thanks a lot guys for your help!

Hi,
Try this
START-OF-SELECTION.
*----------Sumbit Report-------*
Sumit Report......AND RETURN
*----------Check Condition & back to select screen-------*
IF condition.
    MESSAGE s207(zusm_gen) DISPLAY LIKE lc_e .
    EXIT.
ENDIF.
Set something in the memmory.
this can be used to check the completion of the report.
if the 2nd report executed porperly then u further execute the code.
If u dont have any thing to execute after sumbit report
then u can do is.
START-OF-SELECTION.
*----------Sumbit Report-------*
Sumit Report......AND RETURN
    MESSAGE s207(zusm_gen) DISPLAY LIKE 'S' .
    EXIT.
Message was edited by: Manoj Gupta

Uploading selection data to an ABAP selection screen

Not sure this is the best place for this question but here goes.
When a user is presented with a selection screen from an ABAP they have the option to upload data from a text file. This works fine for single value lists but I cannot get this to work for ranges.
I have tried tab & comma delimited files, xls and plain fixed width text and am always presented with the message 'lower limit is greater than upper limit'.
Regards
Paul.

Hi Paul,
You are thanking a poster for his answer.
Please next time also give him points.
See: /people/mark.finnern/blog/2004/08/10/spread-the-love
This time I did it for you.
Remember: When you ask a question you also assume the responsibility to assign points.
Please check your other questions and if the answers were good.
Spread the love and give some points.
Thanks in advance, Mark.

RE:HR-ABAP selection screen problem.

Similar Messages

Maybe you are looking for