Re: I have to reboot the Satellite U400 to ensure that all settings are correctly
I just first started my new U400.
However, after registering Windows and Toshiba Quarantee, the system (toshiba message) keeps on showing a warning/info after every time I reboot that I should reboot again to check if all settings are corectly installed.
Please help!
Hmm its a little bit strange for me.
But I assume there is a tool starting always when the notebook boots up.
Go to RUN and access use the command msconfig.
There you could check what applications start at the beginning.
Then unmark (disable) the process which could cause this message and reboot the notebook.
Similar Messages
-
I have Lion on my IMac and it is hooked up to I Cloud, however, even though all settings are correct I am not getting auto sync of calendars to my I Mac from my IPHone 4S or my iPad 1. Neither am I getting Photfrom my IPhone to my I Mac?
Can someone set me straight?Check system preferences to make sure you have iCal and your photostream checkmarked to TRUE.
If you still have problems, give us more details.
Also, make sure the calendar in iCal you're using/looking at is not "On My Mac", but actually an iCloud one. -
My iphone is silent since downloading IOS7. All settings are correct and the side button is on.
My iPhone is silent (ring tones and text alerts) since downloading IOS7. All settings are correct and the side button is on. HELP! Missing inportant calls.
Try hard reset.
Hold down the sleep and home button until the screen goes black. Turn the phone back on.
If that doesn't work, back up the iphone using iTunes.
Re-install the iOS by putting the iPhone into DFU (recovery mode.)
To do this,
Make sure the phone is pluged in to you computer with iTunes open.
Hold the Sleep and home button until the screen goes black, immediately release the sleep button but continue to hold the home button.
After a few seconds your iTunes should recognize your phone in DFU mode.
"iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."
At this point you should click on "Restore iPhone"
After your phone is done restoring, don't start as new iPhone. Restore from back up.
If that doesn't work, you're SOL.
Take it to Apple. Tell them they are stupid. -
I downloaded CD's to my itunes library. I have itunes match. All my itunes purchased music is on my ipad and iphone cloud. For some reason, while the cloud appears in my library, the CD's that I downloaded (popular ones that itunes recognize) are not showing up on my ipad2 and my iphone4s. When I purchase songs from itunes directly they show up on all i devices (with the cloud icon). In my itunes library all the new downloads from CD's have the icloud icon. However, none of these downloads are showing up on my ipad and iphone as stated above. All my settings are correct. I am sure I am missing something, but not sure what....if anyone can help, I'd really appreciate it. thanks.
This might help: http://www.macworld.com/article/1146958/move_itunes_windows_mac.html.
-
When I move from country to country. I can not send / reply to e-mails. All account settings are the same as when I was at home where there is no problem. Receiving is also not a problem when out side my resident country, what is the answer?
The easiest fix would be to just use safari and a webmail interface.
For example, I have yahoo in my mail app. But on some internet connections it just won't work, so I use safari to get to yahoo.com and access my mail that way.
Your mail provider should have a web interface and you could use that. -
My ringer only works on the phone. All other functions are silent and the ringer increase button does not add volume.
Had this happen today and 2X past as you discribed. A reboot (turn phone off and on) restored all sounds for me. The first time I can't associate w/ a cause but the second and third were just after listening to a podcast using the apple podcast app - the only app available for that. That's my story and for now I'm sticking to it.
-
HT1277 BT have confirmed all settings are correct. Contact Apple, see if they can sort it......
I cannot receive webmail from BT office 365. iMail is unable to receive emails. All my settings/preferences are correct. They were confirmed by BT! Bt operative told me to seek help from Apple! What do I do? BT set up iMail using screenshare, before you ask.
This is a user forum, and not a formal channel into Apple support. If you're looking to discuss this with Apple Support (which I'd infer was what BT had intended), then you'll want to contact Apple support directly, either by phone, email, or the Genius Bar at an Apple store.
You have written that you cannot receive "webmail from BT office 365", but there are few details on how that mail is being routed and received. I'm going to make some guesses here.
In general, you cannot receive web mail directly - assuming that this BT office 365 is a typical web mail system - as there needs to be a mail server involved somewhere. I can't determine from what you've posted and what I see on the network if the mail server you're referencing might be the same server as is used by "BT office 365", or if it could be a different server. If it's a different server, then there are other places that mail can be dropped.
Based on what I see on the net, this BT office 365 web mail package appears to be the Microosoft Office 365 package. If that's the case, then Microsoft has troubleshooting information available, and also has information on determining the proper mail server settings for Apple Mail.
If the server behind the Microsoft Office 365 mail system at BT is the same mail server that you're using here (amd as I might guess), then the issues are within BT's network, or with the network connectivity from your network into the BT servers. Its also quite possible that there are firewall or other blocks operating within your local network, or in the path to the BT servers.
Connectivity can be verified -- that's something that a typical front-line support call would try and resolve - but I don't know if that testing has happened here. Basically, there would be an attempt to connect into the ports made directly, typically using either telnet to the target port, or openssl s_client connect to the target port for SSL-based connections. This to determine if the port is blocked or not.
Given that using telnet or openssl s_client are tools that you probably don't want to start out with, start with the above Microsoft documentation for the proper settings, and try the Apple Mail Connection Doctor tool (Mail.app > Window > Connection Doctor), and see what that reports.
If the error(s) or problem(s) you're encountering here are not a baseline mail configuration error (and if there's more than one mail server involved), then it's quite possible for mail from one mail server to be rejected by another.
And if you continue to have issues, contacting Apple Support directly might be helpful; you can share credentials and server-related information with them, and that can greatly speed up the troubleshooting process involved here. -
I had to re-install Firefox and since then all my history in the address bar is not being saved. I have followed the instructions and checked all the settings to save history but still no history being saved. Is there a way to go back to original default settings?
This can be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox -
iOS 7 makes this claim but have not seem any documentation on how it is done.
Hi Gloria22,
This setting takes advantage of the Guided Access accessiblity feature in iOS. In order to do it remotely, you will need to rely on an MDM (mobile device management) solution to make that happen. We use JAMF's Casper Suite in our school district. They have a product called Casper Focus that allows our teachers to lock/unlock and "foucs" students into a specific app on their iPads. I like it
Hope this helps!
~Joe -
Since the last update my phone won't vibrate. all settings are correct?
Since I last updated my phone the vibrate function will not work. Can anyone help me?
Is vibrate turned on?
Basic troubleshooting from the Users Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved. -
There is no longer a Lock noise, Key clicks, Phone Ringer, camera shutter noise, etc.
has anyone solve this problem? i upgraded my iphone 4 to 5.1.1 and now i can see only ""We're sorry, we are unable to continue with your activation at this time. Please try again later, or contact customer care."
i tried mani sim card, laptops, wifi. but for 7 days the problem is still exist....
Please help me!!! -
Hello, starting with today I have a strange problem with Final Cut Pro X: all events are correctly shown in the finder but in FCP-X there`s`none and every time I open it creates a new event. What is wrong?
Here`s the screenshot.
But anyway:
The drive is Makintosh HD from my Macbook and it is shown in the event mediathek and in the projects. Since I`ve recognized this problem I installed FCPX again and consequently the event and project directory created by FCPX is where it should be and it shows all the test events including it`s files.
So what happens? Opening FCPX you see only one event and that a new empty event. All previous events are not shown there even if you can see them in the finder. So if you import again the clips they are in this new event library. After closing correctly FCPX and reopening there again is nothing than an new and empty event. What it does is that it recognized that i.e. there are events with previous numbers and so it creates an new one with the next available counting number.
If you want to open one event from the finder it by clicking to the file it opens FCPX but it says it cannot open the clicked file. -
New Messages sound quits after several messages have arrived. I've tried several passes at resolving but nothing I have done seems to work. Sometimes I have to reboot the imac several times to get the New Messages Sounds back. Everything else works. The only thing I haven't done is reinstall the OS and that seems foolhardy.
Hi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt -
Why do I have to reboot the iPad to receive FaceTime calls?
Why do I have to reboot the iPad to receive FaceTime calls?
Razmee, many thanks for your correct advice. You are a STAR. So nice now to be able to get the Internet all the time. Great advice.
-
I am having trouble getting mail from the shaw server that my new iMac is connected to. I have to reboot the system to get Outlook for Mac to access the system and obtain new messages. Any ideas? Its at the point where I have started using the PC again as its less trouble.......
In Firefox 3.6.4 and later the default connection settings have been changed to "Use the system proxy settings".<br />
See "Firefox connection settings" in [[Server not found]]
You can find the connection settings in "Tools > Options > Advanced : Network : Connection"<br />
If you do not need to use a proxy to connect to internet then select No Proxy
Maybe you are looking for
-
Specifically I'm trying to import a .MOV I made in Quicktime. The file opens up everywhere else so it's not an issue with the file being corrupted. The error message I get from CC is "Could not complete command _____________ because the video file co
-
Mousing over some UI elements doesn't always display the correct pointer
When I mouse over some elements in a UI, sometimes the mouse cursor isn't correct. For example, when typing this message, if I open up 'Launchpad' by using the gesture, my mouse cursor stays as the text cursor, not the mouse pointer arrow, as I would
-
Error while using motorola api
Hi, I'm using the MOTOROLA's API to develop a MIDlet for an A835 phone. I used the location API (package com.motorola.location) to access the device's incorporated GPS. The emulator doesn't create problems, but when I try to dowload the MIDlet on the
-
Requirement Strategy: 10 Anonymous make-to stock production
Dear Guru, I'm trying to test the requirement strategy 10 - Anonymous make-to stock production and I'd expect that the good issue should consume the forecast as explained in the SAP help http://help.sap.com/saphelp_scm50/helpdata/en/e6/28dadc93924146
-
Hi all. I have an issue regarding E65's image gallery and the way it works. Hopefully someone can help me out. Among other things I use my phone as my quick backup device and being a web developer you can imagine the number of gifs that are involved.