Re: I need help with wi-fi password

i need help with wi-fi pass word

I am trying to connect my iPhone with my wireless router and looks to be rejecting the password I have saved for my password for my rounter. I tried emailing for it and the support page for this is not recognizing what I think would have been the email I had at the time it was set up--we are currently not using that email address--and tried by current internet email and it's rejecting that too. I registered as a new user to get in to look for help on this. My previous email probably would have been [email protected]
I have my serial number and such to my router (model: WRT54GSv1.1) if needed. Please advise.

Similar Messages

Need help with boot up password

Hi I need help with my IBM G41 think pad I when to sleep one night and I put some papers on the keys then close the lid with the papers in between on top of the keys now I get need a password when I started my PC can some some help me with this . Or is there any one whom had this some problem . I see a lock on the screen .

Sorry if this seems like a stupid question, but why don't you have the password already? did the computer just randomly lock you out of it? If that is the case, that would be really strange. If there is no bios password on the computer, you should be able to reset the password in the bios.
http://www.google.com/search?q=lenovo+boot+password+reset&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:defficial&client=firefox-a

Im new to this and need help with putting a password on my wireless

I've had my linksys router for a few years now and recently have been asked to secure it so no one else in the neighborhood can connect to it but me but Ive never known how and I cannot find the installation CD for it. I have a model number# WRT54G. I tried searchin the forums but couldn't seem to find one I could understand. If anyone could please offer me some help on how to simply put a password on it so just my computer and the others in the house can access the wifi thatd be great. Thanks

To set up wireless security, you must use a computer that is wired to the router.
Where to find the router settings: The router's login password is usually on one of the "Administration" pages. The other settings are all found in the "Wireless" or "Wireless Security" section of the router's setup pages, located at 192.168.1.1
First, give your router a unique SSID. Don't use "linksys".
Make sure "SSID Broadcast" is set to "enabled".
Next, leave the router at its default settings (except for the unique SSID), and then use your pc to connect wirelessly to the router. Test your wireless Internet connection and make sure it is working correctly. You must have a properly working wireless connection before setting up wireless security.
To implement wireless security, you need to do one step at a time, then verify that you can still connect your wireless computer to the router.
Next, encrypt your wireless system using the highest level of encryption that all of your wireless devices will support. Common encryption methods are:
WEP - poor (see note below)
WPA (sometimes called PSK, or WPA with TKIP) - good
WPA2 (sometimes called PSK2, or WPA with AES) - best
WPA and WPA2 sometimes come in versions of "personal" and "enterprise". Most home users should use "personal". Also, if you have a choice between AES and TKIP, and your wireless equipment is capable of both, choose AES. With any encryption method, you will need to supply a key (sometimes called a "password" ).
The wireless devices (computers, printers, etc.) that you have will need to be set up with the SSID, encryption method, and key that matches what you entered in the router.
Retest your system and verify that your wireless Internet connection is still working correctly.
And don't forget to give your router a new login password.
Picking Passwords (keys): You should never use a dictionary word as a password. If you use a dictionary word as a password, even WPA2 can be cracked in a few minutes. When you pick your login password and encryption key (or password or passphrase) you should use a random combination of capital letters, small letters, and numbers, but no spaces. A login password, should be 12 characters or more. WPA and WPA2 passwords should be at least 24 characters. Note: Your key, password, or passphrase must not have any spaces in it.
Most home users should have their routers set so that "remote management" of the router is disabled. If you must have this option enabled, then your login password must be increased to a minumum of 24 random characters.
One additional issue is that Windows XP requires a patch to run WPA2. The patch is located in SP3, so you will need SP3 to run WPA2.
Note:
WEP is no longer recommended. The FBI has demonstrated that WEP can be cracked in just a few minutes using software tools that are readily available over the Internet. Even a long random character password will not protect you with WEP. You should be using WPA or preferably WPA2 encryption.

Need help with a my password reset for my hp mini 1000.

I am locked out of my HP mini 1000. Got the code CNU9289XZR.
This question was solved.
View Solution.

Try both of the following:
e9lo7uo40b
e9lo7uor0b
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

I need help with resetting my ichat. When i try to login now it wont let me... it says "AOL Instant Messenger password" and then "iChat can't log in to ... because your login ID or password is incorrect. How do I reset this if I cant log in?

I need help with resetting my ichat. When i try to login now it wont let me... it says "AOL Instant Messenger password" and then "iChat can't log in to ... because your login ID or password is incorrect. How do I reset this if I cant log in? When I try to press online the same thing pops up and I have no way of logging in or asking for help.

Hi,
iChat (it would help to know which version) can accept Apple IDs as valid AIM Screen Names.
However if you have iChat 5 or earlier you cannot use ones ending in @me.com or @icloud.com issued by iCloud. (they can be used in iChat 6 or Messages as these versions make a double login to AIM and Apple to allow the use of the password).
In addition if you are using an Apple ID for an AIM Screen Name the password still needs to keep to the 16 character limit that AIM has.
AN @mac.com name can be used on any version of iChat (Until the 30th June 2014)
As it does not need a double check with Apple you can use it to log in to the AIM Web pages
Login here with an AIM Name registered at AIM or and @mac.com name and see if you get any suspended account messages.
Sometimes account can be suspended. Usually because something has triggered the "Unusual Activity" item.
About a year ago many @mac.com users that travelled out of their own country found themselves suspended when they got home.
If the Name checks out of if an Apple ID the password in known to be 16 characters or Less then do this:-
In Lion upwards open a Finder Window and use the Go Menu whilst holding down the ALT key.
Select the Library that appears in the menu list.
Navigate to Preferences.
(If you have version earlier than Lion the just navigate to ~/Library/Preferences (that's the Library in you Home - Little House icon - folder)
Fnd com.apple.ichat.aim.plist (even if you are using Messages)
Drag the file to the Trash and Restart the app.
7:39 pm Thursday; May 29, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Need help with how to reset bios and admin password to reformat hard drive in 8440p elitebook.......

need help with how to reset bios and admin password to reformat hard drive in 8440p elitebook? removal of cmos, resetting laptop, using cccleaner, windows password recovery and hiren's was noneffective, any help is appreciated. thanks

Hi,
As your notebook is a business class machine, security is more stringent - the password is stored in non-volatile memory and there are no 'backdoor' passwords. Your best option would be to contact HP regarding this.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Please help! I am trying to change my Apple Id that used to be my mother to Mine- Every time i have it changed and i go and try and do an update it continues to ask for her old password. I really need help with this!

Please help! I am trying to change my Apple Id that used to be my mother to Mine- Every time i have it changed and i go and try and do an update it continues to ask for her old password. I really need help with this!

Phil0124 wrote:
Apps downloaded with an Apple ID are forever tied to that Apple ID and will always require it to update.
The only way around this is to delete the apps that require the other Apple ID and download them again with yours.
Or simply log out of iTunes & App stores then log in with updated AppleID.

Hello, I need help with my macbook pro. It looks like I cannot install anything anymore. Everytime I try to install a new software, use the migration assistant or click the lock to make changes, it simply does not react.

Hello, I need help with my macbook pro.
It looks like I cannot install anything anymore. Everytime I try to install a new software, I simply get stuck during the installation type process. I put in my password, it does accept it, but it does not go any further.
I tried to reset the password, put no password, repair the permissions, the disk but nothing will do. I nearly got stuck with the log in screen but finally succeeded in disabling it.
So I thought I might try to create a new account but I cannot click the lock to make changes. It simply refuses to react.
I am now thinking about using the migration assistant to save all my settings, data and so fourth, but again I get stuck when I have to type in my password. It accepts it but nothing happens...
I guess it has something to do with the authorization process, but can't find anything on the internet about it... Can you help me out?
I am running Lion 10.7.3.
Regards,
Nicolas.
(I apologize if any grammatical/structural mistakes were to be found, english is not my mother-tongue. )

You probably won't like this suggestion, but I suggest you reinstall Lion.
First, backup your system. Next, reboot your system, press/hold the COMMAND-R keys to boot into the Recovery HD. Select 'Reinstall Mac OS X'. If you purchased Lion as an upgrade to Snow Leopard, the reinstall process will install Lion 10.7.3. If your system came preinstalled with Lion, you might still get Lion 10.7.2. Both installs are a total install of the OS. None of your apps or data will be impacted. Just the OS.

Need help with a terminal command

Ever since Lion, or maybe even earlier, I am fighting a losing battle against memory leaks on my MacBook Pro. Safari for example takes over time 2GB+ for just 2 or 3 tabs open with almost no extensions active. Really strange.
Someone told me about the "purge" command in Terminal to free some of the sequestered memory, so I am doing this a few times a day to be able to use Photoshop, Keynote, Premiere and other stuff concurrently without opening and closing apps like I did 10 or 15 years ago, remember those days?
So here are my 2 questions:
Will this frequent "purge" command harm anything in the long run?
If no, is it possible to automate this "purge" Terminal action somehow? Maybe a desktop icon to click, or fully automated? I am a designer, not a coder, so I would need help with that.
Thank you for your input!
Model Name:          MacBook Pro
Model Identifier:          MacBookPro8,2
Processor Name:          Intel Core i7
Processor Speed:          2.3 GHz
Number of Processors:          1
Total Number of Cores:          4
L2 Cache (per Core):          256 KB
L3 Cache:          8 MB
Memory:          8 GB
Boot ROM Version:          MBP81.0047.B27

Hello, do any modifier keys work, like Optio/alt?
Could you have Firmware password protection in Mac OS X ...
http://support.apple.com/kb/HT1352
It would block usage of all the startup keys, like C, N, T, D, CMD+s, CMD+Option+p+r, CMD +v, Option, and Shift, as well as booting from anything but the Hard Drive.
Force Removing Password Protection
1) Add or remove DIMMs to change the total amount of RAM in the computer.
2) Then, the PRAM must be reset 3 times. (Command + Option + P + R).
http://www.securemac.com/openfirmwarepasswordprotection.php

Installing Elements 11 on Mac. Need help with install error "Setup wants to make changes."

Installing Elements 11 on Mac 10.8.2. Need help with install error: Setup wants to make changes. Type your password to allow this." After entering Adobe password, nothing happens. Locked from further installation. Any ideas? Adobe phone support could not help.

Just before letting changes (installation in this case) be made on the system, Mac OS prompts for password & this has to be the Mac system password. This password prompt is the system's own native prompt & would accept the system password only. Please make sure it is the right system password (all/admin rights) and the installaion should run.

Hi I really need help with re-activating my little sisters iPad

Hi
I really need help with re-activating my little sisters iPad, i already set it up a couple of months ago when i bought it,but unfortunately she disabled it by forgetting her password. i followed the necessary steps to reset it again, when the iPad came back on and we put the apple id and password it kept refusing it, i even reset the password, which sent the verification the email account, i followed the steps to reset, But then i noticed the message at the top of the activate screen with the message “this iPad is currently linked to the following apple ID _______ with a a few hidden dashes, but at the end of the email it says co.uk, but the problem is the email ends with .com. I have no idea how this happened, and its driving me insane and my little sister only used her iPad for a month before this happened. for some reason the the iPad email address ends in co.uk when the actual email ends with .com
I also set up the software find my ipad
Please help

You will probably have to contact Apple to see if they can help.
Contact Us

I desperately need help with Mail, specifically sending

For Starters: I am on OSX 10.9.2 and am trying to use mail 7.2.
https://discussions.apple.com/post!input.jspa?container=2998&containerType=14&qu estion=I+desperately+need+help+with+Mail%2C+specifically+sending
I cannot send. I have been at this for hours and hours and hours. Here are the details.
my mail server however is s1.sistercompany.net
I can receive email just fine. I can also send mail just find having set this up on my iphone and also in thunderbird (which i hate hate hate hate hate hate hate, which is why I am desperate to set up mail)
The settings in thunderbird are as follows:
Servername: s1.sistercompany.net
port: 465
Authentication method: normal password
Connection Security: SSL/TLS
However, I just can't get this to work in Mail. When I write an email and hit send I get a popup that says:
Cannot send message using the server s1.sistercompany.net
The certifcate for this server is invalid.
Now, my tech guy says yeah the certifacte is invalid because you are going through sistercompany server, there should be some way to just accept the certifcate anyway (but he has never used mail before).
So I have serached around and come up with this: http://support.apple.com/kb/PH11706
Which tells me to use the verify certificate dialogue, which I would do except there is no verify certificate dialog. Any thoughts?
<Email Edited by Host>

I don't have a problem watching the Lost episode on abc.com, using a stock MacBook with 512MB RAM. I don't know what technology abc.com uses in their viewer, but I have Flip4Mac and the latest version of Flash player installed.

Need help with session sharing in WebCenter Portal

Hi, How can I share session between a WebCenter Portal application and the portlets it is consuming?
Basically I want this for authentication. In the portal framework application, I'm setting a user object in the session, How can I get the object in a portlet?
Regards,
Navaneet

IN the second page, you have to make sure that the session
has been started.
Put this at the very top of the page -
<?php if (!isset($_SESSION)) session_start(); ?>
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Alidad" <[email protected]> wrote in
message
news:g184i4$jgf$[email protected]..
> have created a login page (php/mysql) with username and
password boxes.
> when
> the form is submitted the mainpage loads up.
>
> i want the main page to be specific to that user, so i
want their name to
> appear in the first line. eg.. Welcome back 'David'
>
> I read a tutorial in the past that tought me to send the
users id in the
> URL
> and then create a record set on the mainpage that was
filtered by the URL
> parameter.
>
> I have forgotten how to do this and the tutorial is no
longer available on
> Adobe's site.
>
> I tried that with
> $_SESSION['MM_Username'] = $loginUsername; \\ in first
page then
> echo $_SESSION["MM_username"]; \\in second page, but
> the
> problem is that is not showing user name.
>
> i need help with that please!
>
> can anyone tell me how to do this? Thanks in advance,
>
> AM
>

Need help with session using dreamweaver

have created a login page (php/mysql) with username and
password boxes. when the form is submitted the mainpage loads up.
i want the main page to be specific to that user, so i want
their name to appear in the first line. eg.. Welcome back 'David'
I read a tutorial in the past that tought me to send the
users id in the URL and then create a record set on the mainpage
that was filtered by the URL parameter.
I have forgotten how to do this and the tutorial is no longer
available on Adobe's site.
I tried that with
$_SESSION['MM_Username'] = $loginUsername; \\ in first page
then
echo $_SESSION["MM_username"]; \\in second page, but the
problem is that is not showing user name.
i need help with that please!
can anyone tell me how to do this? Thanks in advance,
AM

IN the second page, you have to make sure that the session
has been started.
Put this at the very top of the page -
<?php if (!isset($_SESSION)) session_start(); ?>
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Alidad" <[email protected]> wrote in
message
news:g184i4$jgf$[email protected]..
> have created a login page (php/mysql) with username and
password boxes.
> when
> the form is submitted the mainpage loads up.
>
> i want the main page to be specific to that user, so i
want their name to
> appear in the first line. eg.. Welcome back 'David'
>
> I read a tutorial in the past that tought me to send the
users id in the
> URL
> and then create a record set on the mainpage that was
filtered by the URL
> parameter.
>
> I have forgotten how to do this and the tutorial is no
longer available on
> Adobe's site.
>
> I tried that with
> $_SESSION['MM_Username'] = $loginUsername; \\ in first
page then
> echo $_SESSION["MM_username"]; \\in second page, but
> the
> problem is that is not showing user name.
>
> i need help with that please!
>
> can anyone tell me how to do this? Thanks in advance,
>
> AM
>

**New** Need help with your email?

If you’re forgotten your password (it’s so easily done), you need help setting up your email or you’re having problems with your email account please follow the step by step instructions to get help setting up and fixing any email issues you’re having.
Simply answer a few questions about your email account and what you need help with, and we’ll help with the rest.
Each step includes a helpful picture to keep you right.
We’d love to get your feedback on whether this helped you so please post on this board to let us know how you got on.
Stephanie
Stephanie
BTCare Community Manager
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

- Go to Settings>iTunes and App Stores and sign out and sign into update/new account.
Note:
- Apps are locked to the account that purchased them.
- To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account.

Re: I need help with wi-fi password

Similar Messages

Maybe you are looking for