Re: iBot issue

Hi Srini,
can you please provide the path of NQClusterConfig.INI file in 11g .
Regards,
fiaz

http://orabi1001.blogspot.com/2012/05/obiee-11g-configuration-and-log-file.html

Similar Messages

  • IBot issue - Using filters in iBot

    Dear OBI EE Experts,
    We are working on an OBI EE problem, which is the below one.
    We have parent report in OBI answer with out any conditions.
    We created an iBot and we would like to apply a filter condition with out disturbing the parent report and send the output to one set of configured recipients (SA_System recipients).
    Use the same base report and configure another ibot with another filter condition to send 2nd set of configured recipients (SA_System recipients).
    So, when ever we do change in the parent report like adding a column or removing a column, the ibot report should have the impact. Like creating view from oracle table with 'Select * from table1'.
    Net-net, one report to multiple ibots (recipients) with multiple filter conditions.
    Please, let us know if you have any solutions for this.
    Sekar Ramar
    [email protected]
    [email protected]

    Double post: iBot Issues - SA System - Use filters in IBot

  • IBot Issue regarding excel files

    Hello All,
    I am facing an iBot Problem .
    Problem description:
    Application running in Oracle Business Intelligence 11.1.1.6.0
    OBI scheduler server is working fine, so scheduled iBots are being delivered successfully. However, whenever the agent is supposed to send an excel file attached, it results truncated or corrupted. In contrast, the pdf report is delivered correctly. On the other hand, in other all cases, the exports to excel are working fine.
    I restarted the server twice, but I am facing the same error.
    Please suggest any solution.
    Thanks & regards,
    Yessenia

    from html to xls format.
    Try with this
    http://prasadmadhasi.com/2012/08/02/reduce-file-size-by-downloading-a-requestanalysis-to-native-excel-format-directly-instead-of-mhtml-obiee-11-1-1-6-0/
    Pls mark if helps

  • IBot Issues - SA System - Use filters in IBot

    Dear OBIEE Experts,
    We are working on an OBI EE problem, which is the below one.
    We have parent report in OBI answer with out any condition.
    We created an iBot and we would like to apply a filter condition with out disturbing the parent report and send the output to one set of configured recipients (SA_System recipients).
    Use the same base report and configure another ibot with another filter condition to send 2nd set of configured recipients (SA_System recipients).
    So, when ever we do change in the parent report like adding a column or removing a column, the ibot report should have the impact.
    Net-net, one report to multiple ibots (recipients) with multiple filter conditions.
    Please, let us know if you have any solutions for this.
    Thanks & Regards
    Sekar Ramar
    [email protected]
    [email protected]

    Hi,
    My problem is like child report created from a master report and the child report should inherit all the changes what is happening in master table. Like when we add a column in master thene the child report should have the same change without manual intervention.
    Please, some onswer this.
    Thanks Sekar

  • IBot issue

    Hello All,
    I am facing a new iBot Problem .
    Problem description:
    Application running in OBI 10.1.3.4
    OBI scheduler server is working fine. But,
    In Show iBots on behalf of me, the Last run & Next run are blank.
    When i try to save a new or existing iBot, server throws below error
    *Oracle BI Scheduler Error: [nQSError: 76015] The active Oracle BI Scheduler instance in the cluster could not be determined. Either we could not connect to the controlling Oracle BI Cluster Controller, or no active Oracle BI Scheduler instance exists.*
    But scheduled iBots are delivering successfully.
    I restarted the server twice, But i am facing the above error.
    Please suggest any solution, why server behaving in different.
    Thanks & regards,
    Suresh

    Make sure you have these settings
    Edit NQClusterConfig.INI and correct the entry for Schedulers:
    SCHEDULERS = "server1:9705:9708", "server2:9705:9708"; // Scheduler Server
    Then re-start all BI services.
    If iBots still do not save, edit instanceconfig.xml file and remove the entry to the domain:
    <Alerts>
    <ScheduleServer ccsPrimary="server1" ccsPrimaryPort="9705" ccsSecondary="server2" ccsSecondaryPort="9705" />
    </Alerts>
    Pls mark if helps

  • Issue with Ibot subscription

    We have 200 different version of same report(difference is in their filters) and our users want to schedule these report to run once a week. So we created a report with 200 ibots and asked user to subscribe these ibots and customise their subsciption with there specific promts. So when these Ibot runs users get different vesion of results based on their customisation of prompts. And also we will be saving the file in filesystem via javascript.
    Issue is that when Ibot ran , user get their verion of result in thie email but the file which get saved on server does not filtered on the user customisation of subsciption. Basically it ran the report while ignoring the filters which user provided in the subsciption.
    For eg a report which has say two columns
    Fiscal Year Amount
    filter: Fiscal Year is prompted
    So we created an ibot and asked user 1 and user 2 to subscibe it. User1 subscibe it and customise it to run for 2011
    and user 2 subscibe it and customise it to run for 2012. What happened that in their email or dashboard they see data for 2011 and 2012 respectfully but on the filesystem on server thhe saved filed (Job_id_user1_filename.xls) and Job_id_user2_filename.xls) had values for all years and they are same , they donot filter the data based on their subsciptions.

    Please make sure you dial number without leading 0 after country code.
    +64800
    Your subscription is active and working fine, but dialed numbers have extra 0 in it.
    If you still wish to get a refund then please contact customer service: https://support.skype.com/en/faq/FA297/How-do-I-request-a-refund
    Andre
    If answer was helpful please mark it with Kudos and if issue is resolved mark it with solution. This will help other users find this answer more easily. Thanks in advance!

  • PDF format issue on email delevered Ibot

    Hi,
    I am having an uncommon issue.
    We are having some ibots delivering the report as PDF attachment to user group. On friday morning when the user tried to open the PDF attachment on a email ibot delivered, he got the error below.
    "Adobe Reader could not open 'filename.pdf'" because it is either not a supported file type or because the file has been corrupted (for example, it was sent as an email attachment and wasn't correctly decoded).
    After sometime the error was gone and everything started working as normal. But we dont know when we will get the same error again. The user has got the same error last month.
    There is not issue with the ibot design, as during the certain time frame all ibots delivered fails with same error.
    Please help me if you know the reason for this behavior.
    Thanks
    Krishana

    Do you have any settings in Adobe Reader to look for updates at a certain time like when the problem occurs. I'm wondering if there is something that temporarily disrupts the ability of the file to be converted to pdf which causes the corruption issue. Check to see that there are no scheduled updates going on or any system process that may take out the ability to create a pdf file temporarily. This may be what's happening.

  • Ibot-publish for subscription issue.

    Hi Everyone
    I have a issue in which the user cant save the i-bot in the shared i-bot folder after he checks the publish for subscrition functionality. The user gets access denied when he tries to save it in that folder. I know we can do
    it by giving the presentation server administrator privelege to the user but the thing i wanted to know is that is there any other way so that the user can save it in the shared ibot folder without giving the presentation server privelege.
    Please help folks.

    The id with which u have logged in cant be added in the publish for subscription recipient list.
    ais there any other way??

  • IBot schedule issue??

    Hi friends,
    I have 6 iBots scheduled on different time everyday.
    iBot A, B, C are scheduled at 3:00:00 AM 3:15:00 AM 3:30:00 AM respectively.
    iBot D, E, and F are scheduled after 4:00:00 Am with 30 minutes gap.
    When I check them in morning after 7:00 AM they are not delivered properly.
    Sometime A, B and C runs and sometime D, E, and and F runs. I never see 6 alerts on the same day on dashboard.
    I'm using these iBots for cache seeding purpose.
    In destination tab in delivers I've checked Oracle BI Server Cache under System services.
    Please help me resolve this issue.

    Hi Toonee,
    go to *<Local Drive>:\OracleBI\server\Log*
    Here you find the iBots folder including the NQQuery, NQSAdminTool, NQScheduler, NQServer log files..
    Just go to iBots folder and check the log..
    Hope i am correct about the location..
    Thanks & Regards
    Kishore Guggilla

  • Report format issue in OBIEE 10g sent through iBot

    Hello Expert,
    I have scheduled an ibot report through ibot to my official mail id. We are using Lotus notes. I am sending report as a mail body so i am selecting HTML in delivery type.
    this is the report is not comming as it is , the column width is getting srinked. I have tried with to put width in Aditional formating as well. But there is not effect in the report.
    Please revert.
    Thanks in advance.
    Niraj

    Try by setting view properties like Table or Pivot table if this is not working then attach the report to a page and set the section properties and see how it works.
    If this is not working then Notes might have trimming it ;)
    If helps pls mark

  • Issue in Ibots deliver the reports through mail

    Dear All ,
    I am getitng the below error when i ran the ibot to deliver the reports through email .
    Steps i have done :-
    1. Configured SMTP in windows 2008 R2
    2. Configured MAil through EM
    3. Created Agent and configured the ibots to deliver the report .
    Eventually succeeded, but encountered and resolved errors...
    Number of skipped recipients: 2 of 3
    [nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: A fatal error occurred while processing the request. The server responded with: java.io.IOException: The system cannot find the path specified.
    Error Codes: AGEGTYVF
    Location: saw.rpc.mis.read, saw.subsystem.portal.pdf, saw.delivers.rpc.getDeviceContent, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
    Error Codes: AGEGTYVF
    AgentID: /users/weblogic/Test_Report_ibot
    ...Trying Agent Get Response Content loop again.... Sleeping for 3 seconds.[nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: A fatal error occurred while processing the request. The server responded with: java.io.IOException: The system cannot find the path specified.
    Error Codes: AGEGTYVF
    Location: saw.rpc.mis.read, saw.subsystem.portal.pdf, saw.delivers.rpc.getDeviceContent, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
    Error Codes: AGEGTYVF
    AgentID: /users/weblogic/Test_Report_ibot
    ...Trying Agent Get Response Content loop again.... Sleeping for 5 seconds.[nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: A fatal error occurred while processing the request. The server responded with: java.io.IOException: The system cannot find the path specified.
    Error Codes: AGEGTYVF
    Location: saw.rpc.mis.read, saw.subsystem.portal.pdf, saw.delivers.rpc.getDeviceContent, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
    Error Codes: AGEGTYVF
    AgentID: /users/weblogic/Test_Report_ibot
    Exceeded number of request retries for method GetResponseContent.

    Thanks .. But when i choose the plain or HTML text delivery options . it throws the below error .
    AgentID: /users/weblogic/To_Muni_Delete
    [nQSError: 75027] Failed to open connection to SMTP Server (host 10.19.252.13; port 25). AgentID: /users/weblogic/To_Muni_Delete
    ...Trying SMTP Delivery loop again... Sleeping for 3 seconds. AgentID: /users/weblogic/To_Muni_Delete
    [nQSError: 75027] Failed to open connection to SMTP Server (host 10.19.252.13; port 25). AgentID: /users/weblogic/To_Muni_Delete
    ...Trying SMTP Delivery loop again... Sleeping for 3 seconds. AgentID: /users/weblogic/To_Muni_Delete
    [nQSError: 75027] Failed to open connection to SMTP Server (host 10.19.252.13; port 25). AgentID: /users/weblogic/To_Muni_Delete
    ...Trying SMTP Delivery loop again... Sleeping for 3 seconds. AgentID: /users/weblogic/To_Muni_Delete
    [nQSError: 75027] Failed to open connection to SMTP Server (host 10.19.252.13; port 25). AgentID: /users/weblogic/To_Muni_Delete
    Exceeded number of SMTP delivery retries.

  • Facing Issues with iBots

    Hi All,
    We configured the Ibots following steps.
    1.We created DB User and Table.
    2.we Checked instanceconfig.xml file for checking <schedularserver> tag we found
    3.Add the schedular Administrator to the credential store
    4.Configured the Job Manager
    5.We ran the sample iBot for testing
    When we ran the iBots we are getting the followin error in Production Envorinment we nedd this ASAP.
    Error:
    +++ ThreadID:7a0:2011-07-27:12:09:30
    Global Error:[nQSError:77006]Oracle BI Presentation Server Error:Afatal error occurred while processing the request.The server responded with:ODBC Driver returned an error (SQL DriverConnectW)
    Error Codes:OPR40NWY:U9IM8TAC
    State:08004.code:10018[NQODBC][SQL_STATE:08004] [nQSError:10018] Access for the requested connection is refused.
    client libary initialization failed .Reason:UnKnown SSL error(08004)
    Could pls help us why we got this exception .
    Thanks,
    Vijay,

    Hi Saichand,
    I am using Administrator user name and password for both schedular and RPD.And one more thing i need to discusses with you when we ran the iBots we didnt get any log file.I configured the exact mail server and portno for sending iBots alters or Emails.
    When i ran the iBots its showing completed statusin JobManager ,But am not getting any Email or alters and there is no log entry file under ORACLEBI/SERVER/LOG/IBOTS directory. Do we have any Log entirs for IBots.
    Could you explain why i got this type of exceptions when am sendind iBots alters.
    Thanks,
    Vijay

  • Issue with IBot

    Hi all, when I try to save an Ibot, I get the following error:
    Oracle BI Scheduler Error: [nQSError: 76012] The Scheduler client connection was closed.
    Impactos del error
    Códigos de error: GYFPI8RN
    not everytime but quite often for 2-3 times in a week.I have the Scheduler Service running and the Presentation services is also running. However, i need to re-start the Scheduler Service,even though it is up and running fine
    anything else i need to do for this.we are having a clustered environment

    Since you have clustered setup include a tag in instanceconfig.xml if its not there..and set to False
    Oracle BI Scheduler service inactive

  • Error while saving Ibot

    Hi im using siebel analytcis.
    I have created those tables required for configuring the scheduler in the database, i am able to start my scheduler services also.
    But when i try to save an ibot, the following error comes:
    Siebel iBots Server Error: [nQSError: 16001] ODBC error state: S1000 code: 1456 message: [Oracle][ODBC][Ora]ORA-01456: may not perform insert/delete/update operation inside a READ ONLY transaction . [nQSError: 16015] SQL statement execution failed. at stage of execute transaction command with data source:
    Can anyone help on this?

    Hi
    in metalink3 there a doc. for a similar issue , the doc id is 486843.1
    thanks

  • OBIEE report filter and delivery ibots

    Hi All,
    One of my reports (with 20 cols) consists of multiple rows with repeated customer names (about 100 distinct customer names and approx total 5000 rows). We wanted to automatically filter out the report on customer names and send the filtered reports to the respective customers. So these 100 customers will receive their own 50 rows. We were wondering how we should go about doing this. We thought of maybe using a) iBots or b) GO URL with dummy dashboard. I was wondering if anyone has experience tackling this issue and what will be the high level design steps that will be required.
    Thanks.
    ~Shiv

    You must filter the data directly in the RPD.
    1)
    Create a session variable that contains the name (or ID or whatever) of the customer.
    If the name of the customer is the login he will use to connect to OBIEE, you can use :USER.
    Example 1 : suppose you have a table that contains list of customer with their name and their login.
    Select name from customer where login = ':USER'
    That is your initialization block that will populate your "customerVAR" session variable.
    Example 2 : you don't have such a table, but customer name = customer obiee login
    go directly to point 2
    2)
    Filter the table with this variable.
    Example 1 :
    +"table.customer = valueof(NQ_SESSION.customerVAR)"+
    Example 2 :
    +"table.customer = ':USER'+
    3)
    As a result, when a customer will connect to OBIEE and display the report, the data will be filtered. He will see only data that he's authorized to see.
    When you will create your iBot, this filter will be used depending on the destinary (= the customer).

Maybe you are looking for