Re ilife 11: I bought it so I could manipulate the sound WITHIN an imovie clip. The sound track in imovie 09 fluctuates wildly following export of the movie. It seems that ilife 11 in fact does not have improved controls. Any suggestions?
Can I transfer my files to the apple movie "pro" system instead? I forget what its proper name is. With that programme like the old imovie of '05 approximately, you can grab the sound track within a clip and manipulate its volume up or down.
I need to do that to compensate for the coder problems in imovie 09 and 11 soundtracks.
ecivres wrote:
....you can grab the sound track within a clip and manipulate its volume up or down...
This can be done quite easily in iMovie '11.
Firstly, click on the waveform icon at the bottom right of iMovie's window (also at the lower right of the Project window) - shown here:
You will see the volume level line within the waveform. For the section you wish to lower the volume, click and drag across the waveform so that it is highlighted with a yellow border. Now you can drag the volume line up and down. See the following example, showing the different volume levels:
TIP: Set the thumbnail slider (next to the waveform icon) to half a second - this will show more detail in the waveform, with each thumbnail representing half a second of video.
John
Message was edited by: John Cogdell - added TIP
Similar Messages
-
I just bought an iPad3, it does not have facetime. Any advise on how i can get it?
I just bought an iPad3, it does not have facetime. Any advise on how i can get it?
Where did you buy it ? If you bought it in the UAE or Saudi Arabia (and possibly one or two other countries) then it is blocked by those country's governments and it can't be installed, including by iOS updates.
-
Just bought a PNY flash drive and my macbook pro does not read it. Any suggestions?
Have used other drives on my macbook pro and they work fine. Just bought a PNY 32gb flash drive and my mac does not read eat. Any suggestions?
does the some thing happen wiht other flash drives? If it's isolated to just that flash drive then you need to contact PNY for support.
-
I try to drag a photo folder into lightroom 4 on my MAC, lightroom fails to open and a 'Corrupt Catalog Detected' screen pops up. Clicking on 'repair catalog' does not work either. Any suggestions?
I'll have to get a better instructor on deleting the preferences since when I've doen it in the past nothing is there when I open LR the catalog is gone. I assumed that was what was supposed to happen so I start importing all over again. But that is a different issue...
The problem has been happening since at least the beta of 3 came out and I saw other posts back then saying they had similar issues but I assume it was a beta thing... But since the full version came out and through each incremental change I haven't seen an improvement. If anything it has gotten a little worse with time.
I have to try to be careful to not be in a hurry and start clicking around in the catalog as it seems fragile until it has cataloged all the photos in the library. When starting you will see the numbers populate the folders very slowly and I try not to click on a folder that hasn't had the number of photos pop up yet. Also draging the slider down to see more of the cataloge can have the same affect and crash the system.
I wish I had more to go on.. I believe it may be a resources issue but as I went from 3-4 Gig I thought it would get better. I don't have big programs running but did have outlook and word running in the background along with firefox and chrome.
And yes it only happens on this HP desktop (it's 2+ yrs old) and may be showing it's age a bit. My laptop which has less resources doesn't have the issue.. I have them sharing the catalog. (not at the same time) just when I'm working in other places in the house.
Jeff -
after upgrading to mountain lion, i find that my mail app does not have a "VIP" Tab. Was wondering if anyone else has this issue and what it is about?
First, select sender(s) as VIPs. Then the VIP category will appear.
To select a sender as a VIP, open an email from that sender, then hover over their name and a star icon will appear to the left. Click the star, and that sender will be set as a VIP (and the category will appear in the pane on the left). -
The Apple helpdesk told me that my iPhone 4 does not have the function to keep sent mails stored. I cannot believe that. My iPhone 4 has a Sent box, I have checked the Sent box in Configuratieo--> E-mail, ...Calender..,but the Sent box is always empty after I have sent an E-mail. I know that the E-mails arrive at their destinations. How can I activate the Sent box?
lol the person you talked to at Apple was not very bright.
Of course you can have sent items in your mail on the iPhone 4. I have mine there all the time.
Sounds like you might have issues with the software.
I recommend trying a reset, send email and see if that goes to the sent items directory
If not do a restore.
#1: Reset: http://support.apple.com/kb/HT1430
#2: Restore: http://support.apple.com/kb/HT1414 -
iPhone 4S. My e-mail service provider is Embarq. I am receiving e-mails, but I cannot SEND/REPLY to e-mails. I get message that recipient was rejected by the server because it does not allow relaying. Any suggestions.
Problem has been solved thanks to a posting by AmberDrivingKendal on 5/15/11. More Like This section was a great help.
-
I am trying to access my calender in the app Planner Plus and I get the message. "This app does not have access to your calendars." You can enable access in Privacy Settings. But when I go to Privacy Settings, there are no apps listed under Calendar. Anyone?
Oh my gosh. This worked perfectly!!!
After allowing the changes, I just had to open the apps again (such as Instagram), then the pop-up asking to allow access to Photos appeared!
And I thought I was going to get rid of my iPhone 4 already because of the issue. -
I have a late 2009 MacBook which I want to connect to an old LG tv. The tv does not support HDMI it only has the (red, while, and yellow) ports. Sorry I dunno the exact name for it.
So I was thinking of using the Apple Mini DVI to Video Adapter (s-video), link below...
http://store.apple.com/Catalog/dk/Images/M9319_screen.jpg
But I'm afraid that the MacBook might not support the adapter.
Can anyone give me a solution for this? Is there an alternative way of doing this? I'm kinda new to apple display adapters.The Late 2009 model 6,1 has a Mini DisplayPort not the Mini-DVI. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info. When the System Profiler comes up check the Model Identifier.
Composite is the name for the red, white and yellow RCA plugs on your TV or red, white and S-Video plugs. If you want to use the Composite input on your TV there’s no Mini DisplayPort to Composite. You’ll have to get a Mini DisplayPort to VGA adapter http://www.amazon.com/s/ref=nb_sb_ss_i_1_19?url=search-alias%3Delectronics&field -keywords=mini+displayport+to+vga&sprefix=mini+Displayport+to and a VGA Adapter to TV S-Video RCA Out Cable for PC Video. http://www.amazon.com/VGA-Adapter-S-Video-Cable-Video/dp/B000Y7T5UU/ref=sr_1_7?s =electronics&ie=UTF8&qid=1316369974&sr=1-7
Only the Yellow plug or the S-Video plug for video will work. For sound you'll also need audio cables to the TV using a 3.5mm stereo headphone jack to RCA sound plugs. You attach it from the headphone jack of your MacBook to the appropriate input plugs on your TV http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=min i-dvi&x=9&y=13#/ref=nb_sb_ss_i_2_19?url=search-alias%3Daps&field-keywords=macboo k+audio+cable&sprefix=macbook+audio+cable&rh=i%3Aaps%2Ck%3Amacbook+audio+cable -
Phone does not ring when called any suggestions
Iphone4 does not ring when called. Any suggestions?
Is the silent switch on?
Does the ringer not sound or does the call not come through at all?
Can you make outgoing calls? -
I have an Imac 7.1 intel and trying to download videos into an Ipad - I keep getting error messages that states not supported - any ideas?
What is a 7.1 intel?
-
Imbedded SWF does not have Player Controls?
Hello,
I am using Go Live CS2 and have a Flash video to put on a page.
I have Flash CS4 so I made an SWF and put on the Go Live page.
When I preview in a browser, the video plays but the player controls are not there.
When I preview in Flash (html preview) the controls are there.
Also, the video is auto-playing even after I unchecked auto play in Go Live.
Do I need to install some sort of Flash player code for Go Live?
Thanks for your help!Hello,
I am using Go Live CS2 and have a Flash video to put on a page.
I have Flash CS4 so I made an SWF and put on the Go Live page.
When I preview in a browser, the video plays but the player controls are not there.
When I preview in Flash (html preview) the controls are there.
Also, the video is auto-playing even after I unchecked auto play in Go Live.
Do I need to install some sort of Flash player code for Go Live?
Thanks for your help! -
Why is it that Apple Iphone 4 does not have any animated wallpapers?
I love my iphone 4 but would really love to have animated wallpaper!
It's not a feature of the iPhone. No one but Apple knows why they do things but in this case, I'm guessing it's not there because it offers no user benefits and will only use unnecessary resources. IMO, it's just a gimmick that gets old very quickly. If you really want to modify your smartphone, get an Android, not an iPhone.
-
anything is helpful the accout is waffels104 and i accidently created a new account that i named WAFFELS104. i know i created the acccont because when i tried to name this one waffels104 it said that that was taken. Oh yes i know i spelt waffles wrong.
You weren't hacked, it happened to me too, don't know why. I just remade my account and all my games kept their achievements and progress, so it's all fine.
Not the greatest solution, but I really don't have a clue. -
All I did was tap the red message+ icon on the home page and I got this as one of the messages. I do not know where to go to grant the desired permission.
Congratulations on your new phone Gramps5019! Let's make sure we fix this asap. All you have to do is go to Settings from your phone, the More>Select 'Default SMS App' and choose "Messages" instead of "Messages ". This will fix it.
AdaS_VZW
Follow us on Twitter at @VZWSupport
Maybe you are looking for
-
Date format in a parameter field (help)
Post Author: binsk CA Forum: Formula Hi Guys, Newbie in CR world. I need help in changing the date format in parameter field. present setting is YYYY/MM/DD. I need it in DD/MM/YYYY. How is it to be done? My db is running in oracle. I'm using the CR X
-
Passing Order By String to Cursor
Hello, I am attempting to do the following: Pass a parameter to a cursor that tells the cursor what to order by. I.e., if user clicks a date column, the tablename_datecolumn string is passed to the cursor. I thought this would have been relatively si
-
is it possible to get the coloumn names if the query returns an empty result set eg: my query is some thing like this select count(*) from table_name. if this query returns empty result set then i need to know the coloumns which are being in the quer
-
Your software may be out of date
I get this message, "Your software may be out of date Software Updater analyzes your computer for out of date software and recommends the latest updates to download. Avoid Vulnerabilities Reduce crashes and ensure optimal browsing experience Automati
-
Hi, in 10g R2, in my database , the status column of V$LOGFILE is empty : SQL> select member, status from v$logfile; MEMBER STATUS D:\BASE\MYDB\UNDO\REDO04.LOG D:\BASE\MYDB\UNDO\REDO05.LOG D:\BASE\MYDB\UNDO\REDO06.LOG SQL