Re: IMAC G5 Model Number A1076 hard drive replacement
Re: IMAC G5 Model Number A1076.
I replaced my internal hard drive with a brand new drive. My computer is a IMAC G5 Model Number A1076.
When I insert Leopard Install Disk 1 and boot, I get to the point where I am asked to select a drive. Nothing is showing. My hard drive is not recognized.
I Inserted the Mac OS X Leopard Install disc then restarted the computer while holding the C key. When the computer finished starting up from the disc, I chose Disk Utility from the Installer menu. after selecting the language. I did not click Continue in the first screen of the Installer.
My hard drive will not show up in the disk utility menu. What am I missing?
Does it show up in Disk Utility? Is it Formatted for Mac?
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
How to format your disks...
http://www.kenstone.net/fcp_homepage/partitioning_tiger.html
Thanks to Pondini, Formatting, Partitioning, Verifying, and Repairing Disks...
http://web.me.com/pondini/AppleTips/DU.html
Similar Messages
-
IMac (24-inch, Early 2009) Hard Drive Replacement: Hybrid and Maximum Size Question
I have a 24-inch iMac, early 2009 model and the internal hard drive has died so am looking to replace it and also upgrade it in the process.
At the moment the broken internal drive was the standard 1TB model that comes with the computer. I have been doing a little bit of research and I'm liking the sound of a hybrid drive as they seem to be a relatively economical was of achieving close to SSD speeds. I've been looking particularly at 'Seagate ST4000DX001 DESKTOP SSHD 4TB SATA 6GB/s NCQ NAND 8GB 64MB HYBRID' for the replacement. I guess my question is if this drive will work in the iMac. Does a hybrid drive present and problems? Also, is there a limit to the maximum size the replacement drive can be? Will 4TB exceed this limit? Lastly, I understand this drive uses SATA III to connect with the computer, which is backwards compatible (I think?) so I'm presuming this will work in my iMac?
Thanks in advance.The hybrid drive will kinda sorta be as fast as an SSD. The newest Seagate Hybrid is quite intelligent about caching the most often used files in flash and is quite an improvement over the first iteration. I used both the first and second generation drives in my 2007 iMac and was quite impressed with their performance…until I installed an SSD. The problem with the hybrids is that they just don’t have enough flash and no matter how intelligent the drive is it is guesswork so sometimes you’ll find the drive access just as pokey as any other 5400 RPM drive and then other times very fast.
For about $200 it is a decent upgrade but with SSD prices having dropped nearly 50% in the last 18 months it is worth considering a smallish internal SSD for the OS and applications and an external drive for data. -
My iMac (late 2010 model) desktop's hard drive is fried (was about 200GB). How much am I expecting to pay for a new one and retrieve my information?
As you can see Erin, trying to recover information from a hosed drive can be very expensive.
I would suggest first the OWC site as well. You can get a new drive of choice in size there.
I would also get the voyager http://eshop.macsales.com/item/Newer%20Technology/VOYQHDB1.0T/
and..
http://eshop.macsales.com/item/Prosoft%20Engineering/DGDR3BUN/
http://eshop.macsales.com/item/NewerTech/TOOLKIT11/
Wth your lap top and these folllowing tools your are set to change out the drive, reload OS and then with
the voyager pop in the old iMac drive and with the Prosoft software, try to mount and recover the files. Data Rescue is very good at this " if " the drive is not totally mechanically hosed. Drive Genius is very good at a number of things too. Nothing replaces the old adage of Back Up Back up Back up.
The voyage I listed can become the new backup drive for you.. your choice of tools: Time Machine or by cloning via CarbonCopyCloner or by what I use SuperDuper! IF you want to be really kewl.. both. By that I mean cloning and Time Machine.
It will take you an hour to swap out the drive and spring clean the iMac.. there is a hundred how too,s on you tube.
Hope this helps. Remember if is always when a drive will fail..they all do. I tell the people I support that Harddrives are good for 15 min.. to when they don't work. They will all fail.
Apple Geniuses are very limited to what they can and will do as far as file recovery.
Your best bet is to try to do it your self first. There is lots of help out here and you are not the first.
Don -
iMac Running OSX 10.6.8: hard drive replaced: old PSE3 (don't like/want any of the more modern versions) reloaded fine until serial number entered, then told it couldn't activate or some such, I think because it was a single computer sale and now the new hard drive registers as a new/second computer. The program will run just fine on this computer if adobe will let me install it and activate it. Can this be done, or must I just go buy an old one on eBay, and if so will that also fail to activate? (Some one here last night wanted me to get on Skype for help, as if an old crustacean like me has Skype. No, it'll have to be done right here in print.) Can anyone help?
Unfortunately, you're in the wrong forum. This is not the Elements forum.
Here's the link to the forum you want:
https://forums.adobe.com/community/photoshop_elements/content -
Error message when I try to print: unsupported document-format"application/vnd.cups-command". I recently had my hard drive replaced in my early 2010 21" iMac. Anyone know anything about this? Thanks in advance.
What system are you running? Have you tried going to the Canon website to download and install the latest drivers for that model?
Are you running Time Machine? -
Incredibly my rarely used 2011 Imac Hard Drive is toast. I saw they have a replacement program but even though it is way too soon for a hard drive OF QUALITY to be going out so soon as mine - mine is not included in the replacement program.
Which I have a problem with - how odd it is that they had enough trouble with these computers/hard drives to do a replacement program but mine which did the same thing, expired way too soon isn't covered. I've not had use of the computer for 4 months while I tried to fix the problem so it lasted a little over a year.
Anyway I need to know what to do to try to replace it myself as i haven't the funds to take it to Apple for repair. Plus, Apple Computers and me are history I will never buy another after spending over $1200 for a computer that's nothing more than a very large paperweight right now.
How do I know what size and all that?
I may not be able to afford even that so more than likely this is going to be a very nice looking worthless computer going to the landfill.I Am leaning more toward Kappy's comments, based on your attitude and comments, but I will ask some questions and add some useful comments as I am in a somewhat charitable mood.
Do you still have AppleCare on this iMac?
From your rather blunt comments I assume no, but have to ask anyhow.
This is why I recommend purchasing and registering for 3- year extended AppleCare.
Because of the nature of the newer iMac designs, hardware failure seems more likely or commonplace occurrence. I believe it's more of a excessive heat related issue than anything else despite what Apple has qualified as "normal" operating temps for these iMac models.
Check out the iFixit home site and search for iMac disassembly or tear/take down. Or search for iMac hard drive replacement on the site.
Another option is for you to purchase an external FireWire 400/800 drive as your new boot drive.
Running your iMac from a FW800 drive will be about as fast as running it from the iMac's Internal drive.
If you can afford it get as large a drive as you can afford.
And just for your info, while hard drives can last for years without issue they will go bad, eventually.
Some drives crash and burn faster than others. Especiallly true of the notebook style drives that Apple installs into the newer design iMac. With hard drives, the question is not if they will fail, but when will they fail.
If you had all of your data backed up to an extra, external drive or optical discs to begin with, you wouldn't be so upset about your internal drive dying as your data still would've been intact on another drive or discs in the first place.
I Always advocate for having some sort of backup strategy for your important data in the event of hardware or hard drive storage failure. -
My imac G5 isight September 2006 hard drive takes several attempts to mount. When it does it works fine. Is there anything I can do to repair or do I just abandon it and sell it for parts?
It's an Intel iMac the last G5s were built in 2005.
How to identify iMac models
1. Go to: Apple > System Preferences > Startup Disk and check to besure the that OS X 10.6 on the Macintosh HD is set as the Startup Disk.
2. Start up from you Snow Leopard Upgrade DVD, navagate to Utilities > Disk Utility and Repair the Macintosh HD.
About Disk Utility's Repair Disk Permissions feature -
I am running Snow Leopard on my iMac and have partitioned my hard drive to run Windows XP. If I upgrade to Yosemite, will I still be able to run XP?
bobfromnorth battleford wrote:
...Now what happens if I upgrade to Yosemite on either my iMac or my MBPro?
If I install VM Fusion or Parallels, does Windows run all the time? How does that affect computer performance? and how much do I need to worry about hard drive corruption?
Current versions of Fusion and Parallels are compatible with Yosemite. Both are applications which you only run when you want to run Windows within them. As such, there's no effect on computer performance when they're not in use. Like any other software, there is some additional load on your Mac when both Windows and the Mac OS are running together, but any noticeable effect depends on what each is being expected to do and what resources (e.g. available RAM and the number of CPU cores) you can devote to each.
I think there's less chance of HD corruption with a VM than there is with running Windows natively on the Mac in Boot Camp. Consider that, with a VM, you can create Snapshots of the state of your VM at a given time, and then, if something goes wrong (virus, malware, software installations), you can simply restore the Snapshot in a matter of seconds and eliminate the problems in the process. Moreover you can make a backup copy of the entire VM file, and replace a later version if you wish. Also consider that you can assign, say, 100GB of HD space to the VM, but the actual space devoted to the VM is only what's actually used; as more is needed, more is made available and Windows can't tell the difference. So, for example, my Win 7 Pro VM has an 80 GB virtual HD but only takes up 45 GB on my SSD, and that's with XP Mode in VPC installed inside it.
Microsoft no longer supports XP, though virus signature updates are still being issued. But MS has installed a pop-up message about EOL that won't go away (it's installed with KB2934207). Even if you remove that KB in Add and Remove Software, the pop-up continues. But if you have a Snapshot or a backup which is prior to it's original installation, you can skip installing KB2934207, and suppress it's reappearance on a Software Update list. -
Basically my iMac just crashed and I searched on Google for replacing my hard drive and came across the iMac 1TB Seagate Hard Drive Replacement Program at http://www.apple.com/support/imac-harddrive/
Which is that Apple is asking all 2009 - 2011 iMac users to return their iMac for a free hard drive replacement because it currently has a fault in it. After entering in my serial number, I see that my iMac is elegible for a replacement.
I did register my iMac with Apple, but I didn't receive any email about this program and I lost all my recent data because of the faulty hard drive. I never had an issue before with the drive so this just happened out of the blue.
Is it possible to get a free data recovery from Apple for this? I find that it was a lack of communication that I lost most of my data.I completely understand that it's my responsibility to back up my data but I have it set to every 2nd month, not on a weekly or daily basis to back up the data.
Apple might not be in data recovery business but could they not acquire a third party to do this?
This is what happened:
It was on sleep overnight and when I tried waking it, it was lagging badly. So I shut it down and restarted it. I phoned into techincal support to find out whats wrong, but they were giving me advice to reset the params etc. But i think it made it worse because it didnt want to get passed the white start up screen.
So I phoned back to ask if it's a usual issue with my version of iMac and the man replied that it isn't common and that I should run the disk utility to check the hard drives health.
I installed Mountain Lion on a USB and started the disk utility. Then it highlighted in red that it's a hardware fault and cannot be repaired by the disk utility. Therefore the hard drive has a serious fault with it.
That's when I Google'd for a replacement drive and came across the program. The techincal guy didn't even tell me about it or anything.
If I knew about this sooner, I would have taken it in for a replacement. -
i have 3tb seagate goflex external hard drive.its brand new in package.i took it out of case and deleted partitions that were created by manufacturer.so now i have 2800 gigs.its formatted ntfs.will it work for late 2010 27" imac internal hard drive replacement.i found a apple repair place that will charge me 50$ to swap drives for me assuming i have the drive.i will have to install leopard myself at this price.i dont want to have to pay for anything other than the swap.will this hard drive work with this format or do i need to format it differently.
Hello
formatted ntfs
NTFS format not work on mac system , need to be formatted as Extended Mac os Journaled format and partition table need to be GUID
how to do that in video
HTH
Pierre -
I had a new hard drive replaced in my imac. Now my 1st generation apple TV does not appear under devices in itunes. How do I get my apple tv to connect to my computer? My OS is 10.6.8
Welcome to the Apple Community.
Navigate to Settings > Computers > Your Library on the Apple TV, you may be told you will lose all synced content, but you can't doing anything abouty this, you won't lose any purchased content that has yet to be transferred. Then select Settings > Computers > Connect To iTunes, note the passcode that appears on screen, click on the device in iTunes and enter the passcode when prompted. -
I made a bootable disc on an external hard drive, with Yosemite on it. I am running Snow Leopard on my iMac. How can I open the Yosemite disc from the desktop on my iMac? Does the external hard drive need to be connected to my iMac by firewire to do that?
kahjot wrote:
Snow Leopard's Startup Disk pref can’t see Yosemite volumes. So the only way to switch from Snow Leopard to Yosemite is to do what Niel mentioned. Doesn't matter whether it's connected by USB or Firewire, although performance via FW would be faster.
Are you saying that Yos/10.10, as a volume located in a mounted external drive won't appear as an option in Snow Leopard's Startup Disc, in Sys Prefs? I've never heard this one before. AFAIK any mounted volume, regardless of OS, should appear there. I would think that, if it appears in the Boot Picker/Startup Manager it would also appear and could be booted to from Snow's Startup Disk. I can't test this myself, since I don't have Yos. Is what you are saying documented somewhere? -
My IMAC 24" Early 2008, with Hard Drive of 500 is running out of Memory, down to 25 MGHz. Since I have large collection of photographs in my IPhoto, with fair numbers in raw forms, I presume most of the memory is taken by them. I am unable to find weather that is the cause of low memory, and if it is so, how can I transfer part of them into external hard drive to free up the space. Help into yhe matter will be appreciated. Thanks
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
Now you have two full versions of the Library.
3. On the Internal library, trash the Events you don't want there
Now you have a full copy of the Library on the External and a smaller subset on the Internal
Some Notes:
As a general rule: when deleting photos do them in batches of about 100 at a time. iPhoto can baulk at trashing large numbers at one go.
You can choose which Library to open: Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library'
You can keep the Library on the external updated with new imports using iPhoto Library Manager -
what type of hard drive replacement should I use to replace the hard drive on my first generation mac mini model a 1103? G4 1.25 mhz 40 gb hd 1 gb. mem.
You'll need a 2.5" parallel ATA interface hard drive. Most are 5400RPM, forget 7200RPM drives and slower 4200rpm drives. You don't want a serial ATA (SATA) drive, as that has a different connector and won't work.
One source I've used for drives is Newegg, and their parallel ATA hard drives are at http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=100007605%2060000344 2&IsNodeId=1&name=IDE%20Ultra%20ATA100%20%2f%20ATA-6 . Newegg also has many user comments about the drives. Other sources are OWC at http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/ (Click on ATA on the left) . Look for at least a 3 year warranty. -
New IMac 27"with dual internal hard drives
How do I manage Data on my new IMac 27"with dual internal hard drives? I have just migrated my data to my new computer. Since I've done it from a TM backup, it all went to the Analog HD. Ressearching online I've figured I could re-run Migrating assistant and replace different data between the SSD and the Analog. My problem now is: I want to keep my Music Library (iTunes), my Aperture Library and my documents on the analog, and use the SSD for System, Users and Apps. Aperture, is easy, because both Aperture and iPhoto can find their way, bt iTunes and My documents are a issue. Can Anyone help me?
Install OS X on the SSD:
Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your SSD volume (usually Macintosh HD) from the left side list. Click on
the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button and set the Zero
Data option to one-pass. Click on the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion/Mountain Lion and click on the Install button. Be sure to change the target disk to your SSD.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
After you boot from the SSD open Users & Groups preferences. Click on the lock and authenticate. CTRL- or RIGHT-click on the user account and select Advanced Options. You will see a Home Dir: field with a Browse button on the right. Click on the button. Navigate to the HDD's Users folder. Select your account folder then click on the Open/Choose button. You must restart immediately.
Upon the restart your SSD system will now be using your actual Home folder located on the HDD. You can then go about installing your applications or copying them from the HDD to the Applications folder on the SSD (and also from the Utilities folder on the HDD to the one on the SSD.) You will likely need to do some transfers of the Applications Support and Preferences folders found in the main Library folder.
Maybe you are looking for
-
Customizing Text, Color, and Images (Planning)
I have read this link http://download.oracle.com/docs/cd/E17236_01/epm.1112/hp_admin/frameset.htm?ch13.html and traying to do it in my app but i can't found where HspCustomImgs_en.template loacted Any one know where is the position of this file in Hy
-
How to solve the Error in Action for illustrator cs3
Through action in illustrator cs3 i changed the document mode RGB to CMYK via Visual Basic. But sometimes it throws 2 different kinds of error messages. CODE: appRef.DoScript "Change", "Convert" While (appRef.ActionIsRunning) WScript.sleep 1000 Wend
-
Anyone having issues with facetime fail on iphone 4 or macbook pro?
Is anyone having issues with facetime fail on macbook pro or iphone4?
-
Can't sync iCal on my iMac to my iPhone
Spent most of yesterday trying to sync the info on iCal on my desktop iMac to my iPhone. Still can't do it. Any help would be appreciated. New member here; first post. Thanks so much. Liz
-
Confused - Do I use Full or Quick Editor PE7
I have been trying for a week now but am still confused whether to choose the Full or Quick Editor. Or even a combination of the two. How can I get myself less confused :-)