Re-image after failed hard drive

Re: OSD
When a hard drive fails on an existing configmgr client we replace the drive and then try to pxe boot to re-image the computer however it fails because sccm still sees the object and aborts the pxe boot. We then have to delete the object from AD and SCCM
so the user can proceed to pxe boot.
Wondering if there is a way around this so we do not have t intervene?

there are 2 types of OSD'd.
1.) Refresh - this is for exiting clients that want a new OS, this is done via the software center. These computers are a member of the all operating systems collection. This requires a functioning configmgr client i.e., functioning OS on a good hard drive.
A "Refresh" is not deployed via PXE. A Refresh deployment is diiferent than a PXE deployment.
2.) New - this is for computers that have not been on the network, do not have configmgr / software center. They may or may not have an existing operating system. They are UNKNOWN to SCCM. This type of deployment presents different options to the user.
So yes, it has everything to do with the hard drive because thats what holds a functioning client. So essentially a #1 Refresh has now become a #2 New deployment but requires me to remove it from SCCM and AD. So yes i guess I could then not delete the client
but then I'd still have to intervene and add the computer to the All UNKNOWN Computers collection.
Alternatively I could advertise the task for PXE to the All operating systems collection but they are very different tasks. For 1 example when a PXE task runs it allows the user to select a target OU, but when the a Refresh task runs it maintains the existing
OU.
In SCCM 2007 I created over 100 custom tasks so this was not an issue but with SCCM 2012 MDT I have only 3 tasks and pushed the customization to the OSD wizard within company requirements.
Personally I don't see a way around this but just wanted to run it by you guys.

Similar Messages

  • Music won't sync to new computer after failed hard drive

    My hard drive failed catastrophically. It was a managed computer with a school district. They gave me a new computer. I authorized the new computer for iTunes. I can't sync my music from the iphone. I can see it, but the titles are grey. I am a music teacher and need the music in the computer.

    I don't believe that is possible without downloading some 3rd party app, which Apple strictly forbids. I have done it, but not with iTunes. Search google, that may be of more help to you.

  • HT1751 My win8 pc hard drive failed.  After the hard drive was replaced, I copied iTunes Media backupfiles from external hard drive (Karen's Replicator was used).  ITunes does not recognize the back up files - help! (it does show cloud & recently burned m

    My win8 pc hard drive failed.  After the hard drive was replaced, I copied iTunes Media backupfiles from external hard drive (Karen's Replicator backup software was used).  ITunes does not recognize these back up files even though the location is the same as cloud & recently burned music that does show- help!  The backup files consist of 34,000+ songs; almost all burned from my own CD collection.  I do have most of the songs on an ipod classic but hesitate to try to restore from that.  Can someone tell me how to get these 34,000 songs to show up in iTunes?  Thanks!!

    This diagram shows how a typical iTunes library ought to be set out (click on it to enlarge)
    The red outline highlights the media folder and its contents, the various subfolders are only created if that kind of content is in your library. The right-hand side shows the files that should be found in the iTunes library folder; sentinel is normally hidden so may not be visible. The core of your iTunes library is the file iTunes Library.itl, you need to restore this, the other library files and the Album Artwork folder, as well as the media folder, to restore your library.
    tt2

  • How do I import images from my hard drive without losing resolution? My original files after import are significantly smaller. What should I do?

    How do I import images from my hard drive without losing resolution? My original files after import are significantly smaller. What should I do?

    Hi Keith, and all others chiming in, I do have the correct option checked in advanced settings telling iPhoto to copy the images into the library. What is a refernced library? Perhaps this is where I am getting confused. I exported my entire photo library from an old iMac5 to my external hard drive, from there I attempted to import the entire library to my new iMac. Am I overlooking an obvious and easy way to import from the hard drive to the new iMac--I dragged the entire photo pholder from the hard drive to the open window of iPhoto on the new computer. Now, I only get preview file sizes in iPhoto, unless I have my external drive open. Perhaps I need to import the original images from the hard drive in a different way...?! (This is making me feel pretty stupid.)

  • After replacing a failed hard drive with new one I inadvertently created a different account name(home/user) than the one in the Time Machine backup. Now I cannot restore the photos in iPhoto. What are my options?

    After replacing a failed hard drive with new one I inadvertently created a different account name(home/user) than the one in the Time Machine backup. Now I cannot restore the photos in iPhoto. What are my options?

    The best thing to do would be to start over. Use Setup Assistant this time.
    Boot into Recovery, launch Disk Utility, and erase the startup volume. This operation will destroy all data on the volume. Quit Disk Utility and install OS X. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
    When you reboot, you'll be prompted to go through the initial setup process. That’s when you transfer the data from one of your backups. For a walkthrough, see here:
    Using Setup Assistant
    Don't transfer the Guest account, if it was enabled on the old system.
    Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.

  • Can I save my files from a failing hard drive?

    Sorry if this is kind of long. I booted up the system off the Mac OS X disc after getting startup errors. I ran the Disk Utility and it could not verify or repair the hard disk. S.M.A.R.T. status reads "failing" in red. My best guess it that the hard drive is on it's way out. Tried to save my files by making and image file of the hard disk and putting it on an external drive, but I got an error and it wouldn't save. Put the system in Target Disk mode and tried to access the files from another Mac connected via FireWire, but it wouldn't mount on the second Mac's desktop. I checked Disk Utility and it was creating multiple images of the first Mac's hard disk and failed to mount. Is there any other way to retrieve the files from the failing hard drive? I'd appreciate any assistance on this.

    Maybe, but at this stage, I'd boot from a data recovery tool, such as those listed on my FAQ*:
    http://www.macmaps.com/backup.html#RECOVER
    If none of those work, you may want to consider a data recovery service, depending on the value of the said files.
    Moral of the story, always backup your data*:
    http://www.macmaps.com/backup.html
    It is not a question of if data will be lost, but when.

  • I am attempting to replace a failed hard drive on a F500 Vista laptop. I have a home premium recover

    I am attempting to replace a failed hard drive on a F500 Vista laptop. I have a home premium recovery DVD (1 of 1) and It runs the recovery after a while of loading, and it creates a 24GB partion and loads about 2.6Gb of information on it. the it ejects the disc and asks if I have any suplimental disks, which I don't have. Then it reboots it's self and cycles through reboots for 5 hours, yes I let it do this for 5 hours as the HP site says it could take several hours.
     After this I finally shut down the computer and loaded the hard drive in an ext case and retrieved the above information. I also note that the 250GB drive is shown as a 24GB drive, so I guess it hasn't completed the partions?
    I never get to a Vista window.
    This hard drive does pass the laptop's Bios hard drive check (the former 80GB drive did NOT) and was used to store Old Time Radio shows, until I went to a larger drive.
    The Laptop has a dual core Athlon TK-53 processor and the recovery disc is for 32 bit Vista (and the label in front and license on back don't state Vista 64, just Vista)
    So, Do I need a Vista 64 recovery disc? Should I download the available driver on the HP site and slap in that disc when the Recovery disc finishes and asks for supplimental discs? Might thngs indicate other issues with the laptop?
    I've loaded from scratch XP several times, but this is my 1st Vista experience. Thank you for any help!

    Okay. So I was able to install, and format the new internal HD. Was able to install Lion then Mavericks.  Next, is to try to retrieve my data from my failing old HD.  I bought an enclosure (sled), and have my HD hooked up to my laptop, and it finally showed up in Finder.  So.  Now.  What is next?  I am seeing a screen that shows these folders:  Applications (translate for the PC me = Programs), Library (I am assuming?? these are my various files such as docs, photos, music, etc.) System, opt, and Users.  Should I just try to drag and drop some/all of the folders onto my desktop, then open up the folders and do something with the contents?  Sorry to sound so vague and frankly, rather dumb-sounding, but the nomenclature with a Mac is a bit different than with a PC, and Finder is a little different looking to me than Windows Explorer.  I am relieved to see that I was even able to get this failing drive to show up in the first place, so I feel a little like I could be on borrowed time with it.  I think it may just be bad sectors, since I don't hear any clicking or other mechanical issues with the drive as it spins.  But, any further help with retrieving the data would be VERY much appreciated!!

  • Replacing a failed hard drive on a mid-2007 white macbook

    Replacing a SECOND failed hard drive on a mid-2007 white macbook (Intel core duo 2.16GHz), this time on my own
    Need to purchase a serial ATA drive, but I keep reading that trying to format and/or partition the drive for use with the original Tiger install disk is unsuccessful and that I would have to update to a newer OS before I can do that.
    I have Leopard as the current OS, and that is in my backup files from Time Machine, but I do not have a disk with Leopard.
    Wondering the best course of action and/or if someone had success wit ha particular Serial ATA using the Tiger disks
    Thanks!

    All Intel Macs have always use SATA drives, so all Intel versions of OS X support them including Tiger. I don't know what you've been reading. However, since you have Leopard I don't see what the problem would be because you don't need to install Tiger unless your Leopard disk is strictly an updater disc.
    How to replace or upgrade a drive in a laptop
    Step One: Repair the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Step Two: Remove the old drive and install the new drive.  Place the old drive in an external USB enclosure.  You can buy one at OWC who is also a good vendor for drives.
    Step Three: Boot from the external drive.  Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears.  Select the icon for the external drive then click on the downward pointing arrow button.
    Step Four: New Hard Drive Preparation
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your new hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID  then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Step Five: Clone the old drive to the new drive
    1. Open Disk Utility from the Utilities folder.
    2. Select the destination volume from the left side list.
    3. Click on the Restore tab in the DU main window.
    4. Check the box labeled Erase destination.
    5. Select the destination volume from the left side list and drag it to the Destination entry field.
    6. Select the source volume from the left side list and drag it to the Source entry field.
    7. Double-check you got it right, then click on the Restore button.
    Destination means the new internal drive. Source means the old external drive.
    Step Six: Open the Startup Disk preferences and select the new internal volume.  Click on the Restart button.  You should boot from the new drive.  Eject the external drive and disconnect it from the computer.

  • Could this be a failed hard drive?

    My daughter bought a new 20 GB gen 3 iPod in August of 2004. Now, when she turns it on, she gets the sad face along with a triangle and exclamation point. She has followed the steps in the Apple KB article for this scenario here and I have tried to help her - but all is to no avail.
    A reset does not fix the problem. We have tried to restore it. But when the iPod is put into disk mode and attached to her computer, the iPod does not show up anywhere. It is not recognized by iTunes or iPod Updater. When the iPod is removed from the computer, the computer gives a message saying that the device was not recognized and asks if we want to re-initialize. (Curiously, it does not ask that while the iPod is attached.)
    After the last attempt at this, we could hear the hard drive of the iPod trying to repetitively spin up, about every 3 or 4 seconds. It wouild spin up and stop, spin up and stop, etc. At least, it sure sounded like the hard drive to me.
    If anybody can shed some wisdom on this, I would appreciate it. My opinion is that there has probably been a hard drive failure. Has anyone experienced similar symptoms? And if so, what was the solution? If this is a hard drive problem, I am disappointed that it did not last more than 16 months. Are there any statistics anywhere about the lifetime of these devices?
    Thanks,
    Rich
    EMAC G4 1.0 GHz   Mac OS X (10.3.9)  

    You might try a PRAM reset and see if this does any good.
    http://support.apple.com/kb/HT1379?viewlocale=en_US
    It sounds like the hard drive itself is toast based on how it looks in an enclosure. So you won't be able to boot from it. Possibly after a PRAM reset you could option boot to a disc or to your external drive.
    I had the experience of a failed hard drive totally messing up my PowerMacG4, and it took some doing to get it going again. I finally got it going again, and it has been working ever since without issue.
    The MBP is a different machine, but having experienced first hand what a dying hard drive could do, I think it's well worth doing any resets you can.
    If no joy, make an appointment at the genius bar and ask them if they can run a hardware test from their store feed. If you do have other issues, they should show up then.
    If you end up being able to boot to the optical drive, you could try running the extended version of the Apple Hardware test yourself.
    Good luck!

  • "F11 System Recovery" during boot does not work after Cloning hard drive.

    Problem: “F11 System Recovery” during boot does not work after Cloning hard drive.
    HP Envy m6-1125dx UEFI Notebook Computer with GPT hard drive.
    Original Seagate Hard Disk GPT 700GB with Window 8.0_64 upgraded to Windows 8.1_64
    Startup Menu (F11 System Menu works properly) only on original hard drive.
    Following obtained from Disk Management & diskpart in Command Prompt.
                                     GPT Disk <700GB>
    Partition 1 WINRE NTFS Primary 235MB/400MB [Recovery]
    Partition 2 EFI System FAT32 (LBA) Primary 108MB/260MB [System]
    Partition 3 (NONE) Unformatted Primary 128MB/128MB [Reserve]
    Partition 4 Main NTFS Primary 90GB/195GB [Primary “C”]
    Partition 5 (NONE) NTFS Primary 372MB/450MB [Recovery]
    Partition 6 Data NTFS Primary 7GB/475GB [Primary “E”]
    Partition 7 NTFS Primary 26MB/350MB [Recovery]
    Partition 8 Recovery NTFS Primary 24GB/26GB [Recovery “D”]
    I have Cloned the original hard drive to a new HGST 1TB Hard Drive using four different methods (sector by sector):
    Acronis True Image 2015
    Acronis Backup for PC
    AOMEI Backupper Professional
    Macrium Reflect
    Each time the cloning process completes successfully and has the same original partition arrangement. The computer works properly except when trying to use the “F11 System Menu” key during boot. It gives the following error message:
    “Recovery
    Your PC needs to be repaired
    A required device isn’t connected or can’t be accessed.
    Error code: 0xc0000225
    You need to use the recovery tools on your installation media. If you don’t have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer. “
    Any suggestions why the F11 System Recovery does not work during boot and how to fix the problem would be appreciated. I have does various disk checking and file checking on both the original and new hard drive with no errors.
    Thank you in advanced.

    Hi,
    How did you clone the HDD ? One-for-one or different method ?
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Not solved with Blinking Folder with Question Mark after Erasing Hard Drive

    Before asking, I found someone had asked exact the same question, but that was actually an unsolved thread.
    Re: Blinking Folder with Question Mark after Erasing Hard Drive to try to restore to Factory Settings
    Level 1(0 points)sdc3gJul 5, 2013 6:24 PM Re: Blinking Folder with Question Mark after Erasing Hard Drive to try to restore to Factory Settings
    Re: Blinking Folder with Question Mark after Erasing Hard Drive to try to restore to Factory Settings 
    in response to Niel
    Thanks for the reply, held command+R again and it is trying to pick up WiFi, but it's not picking up my network and won't accept the password even when I try to put it in manually. Any thoughts on that?
    Me too had tried the command+R and failed to manually connect to my network. Can anyone help?

    Well, it was solved. I shifted to other place and tried other WIFis. One of the WiFi had the 2002f problem and another was fine, so the reinstall worked smoothly eventually.
    On the apple support page it says that Supported network configurations and protocols includs both WPA/WPA2, not matter what they are, but it might not be true.

  • How do I copy the entire contents of my laptops failing hard drive to copy back onto a new computer.

    How do I copy the entire contents of my laptops failing hard drive to copy back onto a new computer.

    If the drive has failed the only way to get any data off it is to send it to a Data Recovery company. Which is very expensive and no guaranty they will be able to retrieve any data.
    That is why Apple has included a system to backup your Mac on a regular basis, Time Machine. Also there are other Apps to do basically the same thing by Cloning your internal drive to an external drive. Carbon Copy Cloner and SuperDuper. Along with using Disk Utility to Image the internal drive to an external drive.
    Sorry to tell you but if the drive has really failed your Data is gone unless you pay a large sum of money to one of the Data recovery companies.

  • Recover data from failed hard drive?

    Hi,
    My hard drive failed recently and wouldn't boot up anymore.
    Since then, I replaced the drive and bought an IDE to USB adapter to try and recover some of the data on the drive.
    But when I plug in the adapter to my computer, a message comes up saying "Disk you inserted is not readable by this computer." It gives me the option of "Initialize" "Ignore" or "Eject." When I hit initialize, it goes to disk utility. The disk shows up, but is still not mounted to the computer. The option to repair the disk is grayed out.
    Does this mean that the data is gone and the drive is toasted? Or is there a solution to get this data back?
    Would making an image of the failed hard drive in disk utility and saving it to my new drive solve the problem?
    Any suggestions, in a real bind here?
    Thanks!

    Hi,
    My hard drive failed recently and wouldn't boot up anymore.
    Since then, I replaced the drive and bought an IDE to USB adapter to try and recover some of the data on the drive.
    But when I plug in the adapter to my computer, a message comes up saying "Disk you inserted is not readable by this computer." It gives me the option of "Initialize" "Ignore" or "Eject." When I hit initialize, it goes to disk utility. The disk shows up, but is still not mounted to the computer. The option to repair the disk is grayed out.
    Does this mean that the data is gone and the drive is toasted? Or is there a solution to get this data back?
    Would making an image of the failed hard drive in disk utility and saving it to my new drive solve the problem?
    Any suggestions, in a real bind here?
    Thanks!

  • Finding images on my hard drive

    Last year when i imported photos from my camera into iphoto i could access these images through my hard drive through folders that corresponded to the dates said photos were imported...for some reason this has stopped occurring! Now when i import photos into iphoto I can't see them on my hard drive unless i know the exact file name and carry out a search where i am given a location within iphoto....but no access through the expanding file structure in Finder....is there some hidden file system going on here and how do i revert back to my old method..

    Since iPhoto 7 (iLife 08) the old iPhoto Library Folder is now a Package File. This is simply a folder that looks like a file in the Finder. The change was made to the format of the iPhoto library because many users were inadvertently corrupting their library by browsing through it with other software or making changes in it themselves.
    Want to see inside:
    Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
    Standard Warning: Don't change anything in the iPhoto Library Folder via the Finder or any other application. iPhoto depends on the structure as well as the contents of this folder. Moving things, renaming things or otherwise making changes will prevent iPhoto from working and could even cause you to damage or lose your photos.
    Rooting the the folders of the iPhoto Library Folder has never been a supported way for accessing your files.
    There are many, many ways to access your files in iPhoto:
    *For Users of 10.5 and later*
    You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
    Uploaded with plasq's Skitch!
    (Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
    You can access the Library from the New Message Window in Mail:
    Uploaded with plasq's Skitch!
    *For users of 10.4 and later* ...
    Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
    To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
    This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
    If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
    If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
    *If you want to access the files with iPhoto not running*:
    For users of 10.6 and later:
    You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu. Using the Services Preference Pane you can even create a keyboard shortcut for it.
    For Users of 10.4 and later:
    Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
    Other options include:
    1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
    2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
    3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
    You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.
    All of the above are a: faster and b: safer than rooting around in the Library package.
    Regards
    TD

  • Can't recover my system after a hard drive crash.

    Hello
    My hp DV6-3123tx's hard drive crashed because of a collision
    Steps i did:
    Got a new hard drive and fit it in.
    Using recovery DVDs tried to format it.
    Everything was good but when the system reboots to install drivers it just gets stuck at the starting page (on which hp is written). I waited for hours together but it doesn't recover from that state
    P.S: I had removed CMOS too after my hard drive crashed but restored and saved it's default settings in BIOS before the above mentioned steps.
    This question was solved.
    View Solution.

    Hi,
    Assuming this is just a problem with the recovery media, here's an alternative option you could try.
    Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
    An example of a COA Label can be seen Here.
    You can create an installation disc yourself using another PC - just download the correct Disc Image ( this must be the exact same version that originally came with your notebook ) from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here.  These Images are clean and from a well-respected source, however there are only limited versions available.
    Windows-7 sp1-iso-official-32-bit-and-64-bit
    Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
    http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
    Any additional drivers and software you may need can be found starting Here.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

Maybe you are looking for