RE INSTALL ACRBAT 9 PRO

I PURCHASED ACROBAT 9 PRO 6 MOUNTHS AGO. I WAS ISSUED A NEW COMPUTOR AND I WANT TO INSTALL ACRBAT 9 PRO. I DONOT HAVE A DISC. BECAUSE I PURCHASED THIS ON LINE. CAN SOMEONE TELL ME HOT TO FIND ACROBATE 9 PRO ONLINE AS A DOWNLOAD?

EDCIE wrote:
I PURCHASED ACROBAT 9 PRO 6 MOUNTHS AGO. I WAS ISSUED A NEW COMPUTOR AND I WANT TO INSTALL ACRBAT 9 PRO. I DONOT HAVE A DISC. BECAUSE I PURCHASED THIS ON LINE. CAN SOMEONE TELL ME HOT TO FIND ACROBATE 9 PRO ONLINE AS A DOWNLOAD?
If you purchased it online then it is better to login to your account and see if the link is still available.
If this is not possible, then you may need to contact Adobe with your details to enquire if they could sell you the media for your digital version of the product.
Hope this helps.

Similar Messages

How many times can I install Logic Pro?

I need to re-install Logic Pro 8 on my computer but I hear there is a limit to how many times you can do so. Anybody know what the limit is?

No limit on reinstalling to the same machine, it will work fine.

Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1

Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1.
My garage band & reason software don´t open anymore giving me a error messasge regarding the midi drivers in the operating system.
Please help!!!
Thanks,
Paolo

Somewhere at either Macworld or here I learned that DVDSP 2, DVDSP 3 and now DVDSP 4 "internally" are major re-writes.
Support for HD among a few other items along with QT 7 which comes with Tiger means sincerely that one set of applications/OS is not going to be stable.
Personally I think of all the issues possible its DVDSP vs QT.
Unless you move to DVDSP v4 the alternative is to wipe the disk and go back to Jaguar (10.2) or perhaps Panther but avoid upgrading QT beyond 6. I advocate wiping the disk because I'n not sure an archive and install to down shift to an earlier version of the OS is possible. If it is I'd still worry about mis-matched files in all sorts of locations.

I had to re-install Premiere Pro CS5 and now video are files acting funny...

Hello. I had to reformat my system drive and did a fresh install of Windows 7 Home Premium 64-bit and then I did an anytime upgrade to Windows 7 Professional 64-bit. I then re-installed Premiere Pro CS5. Here's the problem. When I open any of my projects that I worked on BEFORE I re-installed Premiere (when I was using Windows 7 Home Premium), the video files on the timeline all look corrupted when I play the timeline now. They have these weird block artifacts and also a constant pulsing thing going on. I deleted all the media cache files and all the media cache database files but, nothing changed even though Premiere conformed every single video file in the project again. Then, I went to "Sequence" and hit "Render Entire Work Area" and after Premiere was finished rendering, I noticed the artifacts and pulsing are completely gone BUT, the video files look like a VHS tape that has been recorded over a few times. The edges of people and things in focus aren't nice and sharp like they were before I re-installed Premiere. I DO NOT have the time or patience to have to delete all the video files and import them again into the project and re-edit the entire scene! Can someone please help me resolve this problem?! I am about done with Premiere!
Is there a way to delete the video source files that are on the left side of the timeline (next to the "Source" window, where they got imported into the project) without deleting the edited video files on the timeline and then re-import the same source video files into the project, kind of like "refreshing" the video files? If this is possible, it seems like this would fix the problem without me having to re-edit everything again.
*Update* My idea of just re-importing the source video clip won't work either. I deleted one of the source video clips, which deleted its reference clip on the timeline, and I re-imported the video source clip to see if it would play all weird in Premiere and sure enough, it has the same exact block artifacts and pulsing effect like all the other source clips in the project. It seems that if that's the case, it might be a codec problem. But, that doesn't make sense because if I open the clip on my hard drive with Windows Media Player or Allplayer, the clips plays perfectly fine and looks like it is supposed to. So, it must be a codec problem in Premiere??? Could it be that Premiere Pro CS5 doesn't work well with Windows 7 Professional? I find that hard to believe. Can someone please help me?
By the way, all the video clips in the project are from my Panasonic GH1 or my Panasonic GH2. They are all 1080p/24 AVCHD. I even made a new sequence within the same project making sure the sequence settings are AVCHD 1080p 24 and still nothing is fixed.

Have you tried exporting a 10 second section of the footage to see if the issue shows up once the seqeunce is actually exported from the timeline. I edit on CS5 with windows 7 pro at work quite often and have no issues so I assure you that isn't the issue. I also edit with AVCHD footage when at home and work quite freqeuntly as well so I'm positive that isn't the issue. It sounds like a GPU driver has been corrupted in the way it interacts with premiere pro. What type of GPU do you have? If it supports MPE's GPU acceleration have you tried turning it off and seeing if that makes any difference?
Anyways though try to export a 10 second test section of your timeline to see if when the clip is exported from premiere it will play normally in windows media player or vlc or w/e media player you want to use. If it exports fine then you can almost be positive it's a corrupted video card driver. If that's the case I'd re-install your GPU's driver and also check your gpu makers website to see if they have a updated driver avaiable.

How can i install logic pro on my macbook air

How can i install logic pro on my macbook air?

Welcome to the Apple Support Communities
If you bought it in discs, buy the USB SuperDrive or use Remote Disc

Can i install logic pro without the cd because my dvd driver of my mac doesn't work . i have the key for logic pro

can i install logic pro without cd ? , i have the key for the logic pro but my dvd driver of my mac doesnt work ?

Buy an external USB2 DVD/CD drive..... (Amazon's Basic model works great)
Or..
Borrow someone else's Mac that has a DVD drive fitted and use that via Remote Disk
Note:
There is no legal means of downloading available for Logic Pro 9.. unless you originally purchased it via the App Store..
Therefore, in your case, you must install from the DVDs you have...

How can I install logic pro 7.2 (made for power pc) on a brand new Macbook pro?

How can I install logic pro 7.2 (made for power pc) on a brand new Macbook pro with OSX 10.7.4?
This message appears: You can't open the aplication LogicPro.mpkg because power pc aplications are no longer compatible.
Thanks folks

You should be able to copy all the files from your old computer, although it might not work if the old machine didn't have an intel processor. When I got a new Mac a few months ago, I used the migration assistant to copy everything from my old computer's time machine backup disk. All my old pro apps, such as Final Cut Pro 6, work fine on the new machine under Lion.
Later, I wanted to install Soundtrack pro and couldn't do it from the original disks. So I installed it on my old machine and copied the files. It worked perfectly.

Can you install logic pro on more than one system?

How many systems can you install logic pro onto?

I believe via the AppStore you get 5 licences. For the whole family.

I had one of your technicians re-install Acrobat Pro and it still won't open. My technician was Rajat and he was reading from a manual. He did not appear to be competent. He told the case has to be escalated

I had a technician, Rajat, from a Adobe re-install Acrobat Pro. It still won't open. He said the case has to be elevated. How do I get help from someone in the United States?

Not one of my technicians. We are just fellow users of the product.
But if you start from the top and explain your problem we have a fair track record of helping. Some questions for you
- what version of Mac or Windows
- what version of Acrobat Pro
- what exactly happens when you try to open Acrobat Pro (error messages in full please)
- whether it ever worked and what changed?

I want to install XP Pro SP2 on a Mac Mini from a 2003 RIS server.

I want to install XP Pro SP2 on a Mac Mini from a 2003 RIS server. Is this possiIble? How is it done?
The mac has 10.5 which has bootcamp to enable Windows install. I have created a partition but the bootcamp utility asks for a CD. I want to install a RIS build. The Mac has a option for network boot but this seems to only work with Mac Server. I assume the network adapter is not PXE compatible and so a boot disk of some kind will be needed to kick this off?.

Hallo, I installed the program as you said. Everything ok.
When i have to give my serialnummer, it is not accepted. Code is not valid he said
1160-4008-7475-7547-5706-0812
Op 21-sep.-2014, om 17:44 heeft Rikk Flohr <[email protected]> het volgende geschreven:
Hi, I want to install my lightroom version on a new mac pro. How do i get started. Can't find it on this site. Thx
created by Rikk Flohr in Photoshop Lightroom - View the full discussion
www.adobe.com
Hit the Download link at the bottom the page.
Hit Lightroom
Hit Free Trial
When you are done downloading, launch, and enter your serial number from your previous installation.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6749435#6749435
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

I just installed FontPack Pro. I am not able to access the new fonts from Pages. What am I doing wrong?

I installed FontPack Pro. I was successful in loading them into the font book. However, when I open pages and attempt to select a font, quite a number of them have an "A" with a box around the A. In the document it comes up as a box with a graphic inside. What's wrong, and how do I fix it?

They are from memory just a bucket full of cheap fonts (despite the "Pro" moniker). The lot I saw were not even OpenType and there were problems with older fonts in late versions of Snow Leopard so the problems could be anywhere from cheap and nasty fonts, to older format, to installed in the wrong location, to problems with the font cache as mentioned.
Peter

I'm struggling to install Logic Pro 9 upgrade on Mountain Lion

Way back we bought one of the last pre-Intel G5 in order to do music processing. We also bought Logic Studio v6 or 7. Then we upgraded to Logic Studio 8 and later decided to use a macbook pro instead of the G5. So far so good. We then upgraded to Logic Pro 9 and can run this on Lion on the Macbook Pro.
My partner is now working away and takes his Macbook with him, so we want to set-up Logic 9 on my macbook pro which is running Mountain Lion 10.8.4. Once this is done we will take it off his machine, so not pirating in any way.
I have managed (at great length) to install Logic Studio 8 on my machine using Pacifist, and I can open it and create projects etc... I now want to install Logic Pro 9 on this machine but I get a message saying that a qualifying copy of Logic or MainStage was not found on the disk. To complicate matters, we can't find either the logic pro 9 disk or an image copy, so I downloaded from the following link:
http://dl.dropbox.com/u/2972851/logic-downloads-fixed.html
which I found in this thread: https://discussions.apple.com/thread/4948612
I have already spent many many hours fiddling with this, does anyone know how I can get around this problem?

Im using LPX and have found it to work well.... and no less stable than LP9 in terms of general stability. There are some bugs but given we are still in the early stages of development, that is not surprising and is no different to how it was with LP8 and 9 in their early days. I should add I haven't come across any "showstopper" bugs that affect my own personalo workflow and method of using Logic... just a few niggles and minor annoyances... that for the most part can be worked around if they haven't already been fixed in the 3 updates that have come out since initial release.
I have had no real issues with importing LP9 projects into LPX other than of course, the lack of 32bit Plugin support in LPX which means LP9 projects that contain 32bit plugins.. will not fully import into LPX. The midi/audio data imports ok.. the 32bit plugins will be missing however... if you don't have equivilant 64bit versions installed. For me, this issue has been very minimal simply because almsot all the plugins i use, have already been updated to 64bit versions over the last few years.
There has also been an issue with certain parameters in the track/region Inspector after import into LPX, containing weird values.. I have only had this issue once out of maybe 40+ LP9 Projects and in this one case i simply reset the values and all was well. Other users have reported different levels of how often this occurs.
Note: Once a project has been opened and then resaved in LPX the LPX version cannot be opened in LP9 as project compatibility is only backwards and not forwards.
If you cannot find your disk and serial..(which you will also need) Contact Apple as they may be able to provide you with replacements disks if they have any left. Bear in mind if, as it appears, your LP9 is an upgrade from LP8 you will also need your previous LP8 serial as well as your upgrade LP9 serial to properly install Logic on a new Mac. Once installed you can and in fact must... then update LP9 to 9.1.8 via software updates in LIon or Mountain LIon... for Logic to under those OS versions.

I'm a new user and learning, I bought and installed Premiere Pro cs6. I got a nice video clip but has a baby cried in the background and very annoying. My question is, is this noise remover is separate from the cs6 or I need to get this software downloa

I'm a new user and learning, I bought and installed Premiere Pro cs6. I got a nice video clip but has a baby cried in the background and very annoying. I have tried all of the sounds in Prem cs6 but didn't work. My question is, do I need to get a separate sound software download and install to be able to use it?

In the CS versions, there was some audio capability in PrPro but you needed to get a separate audio program for major work. Lessening a baby definitely qualifies as major work. That's lessening, i dont mean eliminating. Adobe's audio program is Audition. There are others "out there'. In the CC versions one just downloads Audution also.
Neil

Problem installing officejet pro 6830 software on my iMac running Snow Leopard

Greetings, I have a problem installing officejet pro 6830 software on my iMac running Snow Leopard. When I insert the HP software disc onto my iMac, and go to the HP website, it says:
"403" Ooops! Request forbidden...
Any possible solutions to this? Thanks for any feedback...

Hi @RNOjetnow ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue with needing the drivers for the 10.6 Snow Leopard OS. You should be able to install the Apple Drivers just by connecting the USB cable.
Here is a document that might help.
Hope this helps you install the drivers.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Installing Premiere Pro 1,5 on a PC with windows 8. How do I solve it?

Installing Premiere Pro 1,5 on a PC with windows 8 failed. How do I solve it?
I should mention it is about 10 years old and Adobe cannot help they say!
Regards
Lars-Erik Eriksson/ Rydöbruk Sweden

You will not be able to install your original, read below
CS2 (and earlier) Activation Server replacement software
http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l
When you install the special version of PPro2 on a Win7 or Win8 computer, you MAY need to right click the program icon and select WinXP compatibility from the option popup... AND Vista problems https://forums.adobe.com/thread/416347

RE INSTALL ACRBAT 9 PRO

Similar Messages

Maybe you are looking for