Re-install DB Adapter

Hi All,
We are having issues with a DB Adapter. We had added another connection manager and data source and now the Adapter is throwing errors when we try to update it and the status is "Prepared". Nothing we have done seems to reslove the issue. Within the UI can we "uninstall" the dbadapter and the re-install it?
Any suggestions would be greatly appreciated....just concerned htat removing it would be permanent.
Thanks,
S

Check the server/domain log file for the errors while updating adapter and paste the same here.
Regards,
Anuj

Similar Messages

Surface Pro 3 / "Windows did not detect a properly installed network adapter"

Hi all,
I've been running the Windows 10 Technical Preview (9926) on my Surface Pro 3 successfully
since January. Unfortunately, I lost all internet connectivity today.
The problem started when I noticed the type cover wasn't working (pressing keys on the type
cover wasn't registering any typing on my screen) and my USB mouse wasn't working either. I tried removing and reattaching the type keyboard but this didn't fix the issue. I had to use the accessibility on-screen keyboard to sign into Windows (thankfully touch
was still working). Once I signed in, I still didn't have typing or cursor ability, so I decided to restart the computer.
Then it got worse. I noticed the Surface Pro 3 was stuck on "restarting" and wouldn't
actually restart. Since it wasn't responding, I held down the power button for about 10 seconds until it turned off. When I turned it back on, the type cover and mouse started working again.
Unfortunately, this is when the WIFI problems began. I had WIFI for a few seconds, and then
I lost internet. I disconnected/reconnected but there was a yellow triangle telling me there was some sort of problem. So I restarted the Surface Pro 3.
When it came back on, there were suddenly NO connections available at all. Opening the "Network
& Internet" settings page gave me the message "Windows did not detect a properly installed network adapter". And here I am, without internet on my Surface Pro 3, borrowing my friend's computer so I can type this message (he is also running
Windows 10 build 9926 on his laptop and is able to connect to my WIFI with no problems, whereas my Surface Pro 3 cannot even detect any networks). I have not dropped or damaged the SP3 in any way, and there have been no storms or power outages or anything
of that sort. Any ideas what could have happened to the WIFI on my Surface Pro 3?
Thanks for your help...
Ethan

Hi Ethan,
Currently, there are a few compatibility issue between the current hardware and Windows 10 Technical Preview (9926 build), this is mostly related to driver compatibility issue.
I suggest you download the latest network adapter driver package to install, when it is finished, check if it appears under Device Manager.
Surface Pro 3, Surface Pro 2, and Surface Pro firmware and driver packs
https://www.microsoft.com/surface/en-us/support/networking-and-connectivity/install-wireless-drivers
You can check if you can install the latest firmware package for your device.
Here is an article to talk about such things:
Windows 10 January Technical Preview on Surface
https://www.microsoft.com/surface/en-us/support/install-update-activate/windows-technical-preview#Known
Regards,
Alex Zhao
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to install IDOC adapter

Hello friends
I need help installing IDOC adapter.... I installed XI connectivity and I am able to view RFC, SOAP, JMS and File adapters. Our team says they need IDOC adapter. I could not find any installation document to install IDOC adapter. I checked Adapter and online documentation. Appreciate any help.
Thank You
Raghu

Hi!
> I am with the impression that I need to run
> "install_idocadapter" under tech_adapter and then I will
> be able to see it under the list of adapters in the
> adapter engine screen
No, the IDoc adapter is not configured in the adapter engine but in the transactions IDX1 and IDX2.
-> http://help.sap.com/saphelp_xi20sr1/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
Regards, Tanja

IMac Running Windows 7 can't 'detect a properly installed network adapter'

I just put windows 7 on my brand new iMac 27'' i7, but to my surprise I cannot connect to a wireless network, and when I go to the trouble shooting section it says-
"Windows did not detect a properlu installed network adapter. If you have a network adapter, you will need to re-install the driver."
Help me to connect to the internet please.

Install the Apple drivers; read the guide.
You should have Lion so you would have Boot Camp 4.0
Boot Camp 4.0 Installation & Setup Guide OS X Lion
Boot Camp 4.0, OS X Lion: Frequently asked questions

Yoga 2 did not detect a properly installed network adapter

Woke up this morning, turned my yoga 2 on, no WiFi. So I used the troublsheeter and it told me there was no properly installed network adapter. Does that mean my wifi card is dead? Anyone else have an issue like this and find a solution (besides replacing a dead card?)
I did:
1) reinstalle drivers via usb from another machine
2) used a system restore point from a few days ago
Neither action had any effect.

Well I just set it to airplane mode and while I had no wifi it never told me that there was no network adapter cofigured.
Also, when you set it to airplane mode the wifi signal icon changes from bars to an airplane.
I think the adapter must have stopped working and then.. started working again. I can't figure out what else it could be.

Error Installing Biztalk Adapter for Enterprise (BT2013)

Hi everybody,
I'm attempting to install the adapter for enterprise application, the machine is a win7-64 (phisical) and previously in this laptop had BT 2010. I guess that is something related to the previous version of BizTalk.
The message is:
"An error occured while applying security settings. Users is not a valid user o group. This could ba a problem with tha package, or a problem connecting to a domain controller on the network"
This machine is a sandbox and the user that is running the setup is part of the administrator's group of the machine and is part of the company domain (AD), and the machine is connected to the net.
In advance, I Apreciate your help.
Thanks in advance,
Luis Cardozo

Hi Luis,
Have you verified that the user is member of Biztalk groups ?I think you need to add the user to biztalk group such as Biztalk Administrator ,SSO Administrator etc prior to running the setup .
Another way around is to create groups manually .
perform the following steps and run the installation again:
Create a new user called CREATOR OWNER (Type this command on the command prompt – net user "CREATOR OWNER" /add)
Create a new group called Users (Type this command on the command prompt – net localgroup Users /add)
You can find detailed document at
link here
Thanks
Abhishek

"Failed to install network adapter - check WINBOM"

Hello,
two weeks ago my network adapter and my soundcard ran away. I brought the laptop to an IBM premium partner, where the mainboard was changed with a notice all would be ok, but with a hint of the service technican that I should try to recover; the problem is still not solved. Yesterday I recovered from a very old version, when the network adapter and sound card worked properly. Since then my sound card works, but only with cracks. That is of course not acceptable. The network card does not work anyway.
When I boot my laptop with the ACCESS IBM button I get an error message from FACTORY.EXE "Failed to install network adapter -- check WINBOM"
I checked them, but there is no factory.exe on my hdd, as well as there is no winbom.ini on my hdd. I only found the and empty entry winbom in the registry.
In the system manager there is no network adapter listed (instead of the wireless ones). No way to install one.
I do not know what to do now. May someone think there is a solution available for my thinkpad or should I sent it to IBM/Lenovo?
The machine is a T43p 2668 PEG.
Cheers,
Herwig
Solved!
Go to Solution.

Welcome to the forum!
I'm surprised that the Business Partner hasn't offered to re-install the OS for you, but then again it may be a local practice that I wouldn't be familiar with.
Try borrowing/downloading a copy of a "live" Linux CD (Mint works out of the box on any T43/p with ATi) and see whether the issues persist there.
If they do, hardware is defective and you'll need to send it back in for another repair.
If they don't, re-installing XP from scratch, after saving the important stuff on media, is the way to go IMHO.
Good luck and let us know.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Error while installing network adapter driver on HP ML 370 G4

We have HP ML 370 G4 server. And I get an error while installing driver for embedded network adapter on Solaris 10.
I don't know what to do...
Can anybody help me??
# pkgadd -d /tmp/BRCMbcme.pkg
The following packages are available:
1 BRCMbcme Broadcom NetXtreme Gigabit Ethernet Adapter Driver
(i386) v7.5.12
Select package(s) you wish to process (or 'all' to process
all packages). (default: all) [?,??,q]: 1
Processing package instance <BRCMbcme> from </tmp/BRCMbcme.pkg>
Broadcom NetXtreme Gigabit Ethernet Adapter Driver(i386) v7.5.12
Copyright (c) 2001-2003 Broadcom Corporation, Inc.
All rights reserved.
This product is protected by copyright and distributed under
licenses restricting copying, distribution and decompilation.
Using </> as the package base directory.
## Processing package information.
## Processing system information.
6 package pathnames are already properly installed.
## Verifying package dependencies.
## Verifying disk space requirements.
## Checking for conflicts with packages already installed.
## Checking for setuid/setgid programs.
This package contains scripts which will be executed with super-user
permission during the process of installing this package.
Do you want to continue with the installation of <BRCMbcme> [y,n,?] y
Installing Broadcom NetXtreme Gigabit Ethernet Adapter Driver as <BRCMbcme>
## Installing part 1 of 1.
/kernel/drv/bcme
/kernel/drv/bcme.conf
/usr/share/man/sman7d/bcme.7d
[ verifying class <none> ]
## Executing postinstall script.
("pci14e4,1644") already in use as a driver or alias.
postinstall: add_drv bcme failed
pkgadd: ERROR: postinstall script did not complete successfully
Installation of <BRCMbcme> failed.
#

If you're sure that you have a Broadcom BCM57xx
device installed in the machine, then you should have a look at
"prtconf -pv" output, locate the Ethernet device, and check the
"vendor-id" / "device-id" property for the NIC.
If the Broadcom device is compatible with Sun's "bge" driver, you
can try to install an addition driver binding entry for your device,
using the update_drv(1M) command
update_drv -a -i '"pciVVVV,DDDD"' bge(where VVVV and DDDD is the pci vendor / device id found in
prtconf -pv output).

Trying to install wifi adapter but NM say no

As titled, trying to revive older Dell with XP sp3 for shop. Installed linksys with speedbooster wusb546s ver2. Nice, as its got a long enough cord to set by window and get signal from house. However NM says it cant add because 'other software' controlling adapter?? only way is disabling all securities,
So I went and got a Dlink dwa-131 but same issue except it doenst get signal unless desk top setting in window, (another non option).
I have a wrt120n router, network magic (I know no longer supported) DSL connection. Have IPAD, IPOD, BluRay player, HP laptop w/7 64bit wifi, Compac with XP sp3 (cabled to router), Dell laptop w/vista 32 wifi, HP wireless printer. trying to add Dell with XPsp3, but adding the adapters software conflicts with NM?
Tried unstalling adapter software and loading drivers-got it to connect but as noted only with network wide open (so software wasnt involved)
Is there a simple way to add a computer using a usb wifi adapter-thats compatible with NM? Ive never had an issue adding stuff but this adapter thing simply has me stumped because of the software. Ive looked around but cant find any real info.
Mark
Solved!
Go to Solution.

Possible that the conflict is with the wireless utilities installed on the computer and the utility which the network magic software is supporting. But from what I know, you should be able to add a device no matter what the utility is being used. Mostly for dell laptops, they have dell wlan card utility on them. For windows laptops, they also have a windows based wireless utility which is called wireless zero configuration. Usually for dell laptops, the dell wireless utility is the default utility that is enabled. I suggest that you disable the dell wireless wlan utility. To do it: right click on the dell icon at the bottom right corner of the screen, click on open dell utility, uncheck let this tool manage your wireless settings, then click apply and then ok. After the utility has been disabled, try to connect to your network using the windows wireless utility (this link will guide you). After connecting to your network using the windows utility, try to add the computer then to the network magic software.

Installing seeburger adapter

Hallo,
have anybody experiences with installing and running the seeburger adapter? The installing have bad impacts of the whole system? What are the problems?
Thanks for in advance,
Frank

Hi Frank,
Just see if these links help you in anyways:
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
Regards,
abhy

How to install network adapter driver?

My Dell xps internet was working fine yesterday (wired connection) but then all of a sudden the internet stopped working even though the cat6 was plugged in to the router. I tried different cables to see if the cable was faulty but it turns out that my network adapter is missing a driver. I checked what network adapters are inside my motherboard but its come up with like 12 different network adapters. How do I know which one i should install the driver for? Also where can i find the correct driver to install?
I should also note i set my pc back to a date which it was in 4 years ago since it was really slow and i wanted to improve its performance.
I searched all over the web to find solution to my problem but none of the solutions at hand worked. 1 solution was to change the properties on my "Local Area Connection" but i haven't even got "Local Area Connection" icon for some reason (i have never seen a computer not have this icon before". It is like my computer is completely not picking up the connection from the router and even worse its as if its repelling it...
Anyways, signed up to this forum to see if one of you guys could help out :).

Sorted it now. Had to go into BIOS and enable internet connection.

Exception occurred when tried to install Weblogic Adapter for SAP 7.0

Hi,
          I tried to install current available Weblogic Adapters for SAP 7.0 into weblogic platform 8.1 sp3, I got the following exceptions. Those exceptions can be reproduced when to deploy BEA_SAP_1_0_70.ear into a weblogic integration domain. Based on BEA Weblogic Adapter for SAP installation guide, there should be a new version of adapter for SAP, such as BEA_SAP_8_1.ear, but for some reason, I couldn't find it. The following are error messages, please help.
          Thanks,
          pg
          ------------- error message ------------------
          <Jul 28, 2004 3:01:41 AM EDT> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating Deploy task for application BEA_SAP_1_0_70.>
          <Jul 28, 2004 3:01:41 AM EDT> <Error> <Deployer> <BEA-149201> <Failed to complete the deployment task with ID 2 for the application BEA_SAP_1_0_70.
          weblogic.management.ApplicationException:
          Exception:weblogic.management.ApplicationException: Prepare failed. Task Id = 2
          Module: BEA_SAP_1_0.rar Error: Error parsing file at line: 36 column: 27. weblogic.xml.process.XMLParsingException: Error parsing file at line: 36 column: 27. The content of element type "map-config-property" is incomplete, it must match "(map-config-property-name,map-config-property-value)". - with nested exception:
          [org.xml.sax.SAXParseException: The content of element type "map-config-property" is incomplete, it must match "(map-config-property-name,map-config-property-value)".]
          org.xml.sax.SAXParseException: The content of element type "map-config-property" is incomplete, it must match "(map-config-property-name,map-config-property-value)".
          at weblogic.apache.xerces.parsers.AbstractSAXParser.parse(AbstractSAXParser.java:1189)
          at weblogic.xml.jaxp.WebLogicParser.parse(WebLogicParser.java:67)
          at weblogic.xml.process.ProcessorDriver.process(ProcessorDriver.java:154)
          at weblogic.connector.deploy.dd.xml.WeblogicRarLoader_Connector10.process(WeblogicRarLoader_Connector10.java:170)
          at weblogic.connector.deploy.dd.xml.DDUtil.processDDFile(DDUtil.java:380)
          at weblogic.connector.deploy.dd.xml.DDUtil.processWeblogicRaDD(DDUtil.java:218)
          at weblogic.connector.deploy.dd.xml.DDUtil.processDDFiles(DDUtil.java:126)
          at weblogic.connector.deploy.dd.xml.DDUtil.getConnectorDescriptor(DDUtil.java:602)
          at weblogic.connector.deploy.dd.xml.DDUtil.getConnectorDescriptor(DDUtil.java:577)
          at weblogic.connector.deploy.ConnectorModule.loadConnectorDescriptors(ConnectorModule.java:693)
          at weblogic.connector.deploy.ConnectorModule.loadDescriptor(ConnectorModule.java:202)
          at weblogic.j2ee.J2EEApplicationContainer.loadDescriptors(J2EEApplicationContainer.java:1379)
          at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1204)
          at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1051)
          at weblogic.management.deploy.slave.SlaveDeployer$ComponentActivateTask.prepareContainer(SlaveDeployer.java:2444)
          at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.createContainer(SlaveDeployer.java:2394)
          at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.prepare(SlaveDeployer.java:2310)
          at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer.java:866)
          at weblogic.management.deploy.slave.SlaveDeployer.prepareDelta(SlaveDeployer.java:594)
          at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java:508)
          at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:25)
          at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
          at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)

Hello,
          You may have a lot of greif if this is the wrong version of adaptor for 8.1. I too was directed to this EAR file when looking for the 8.1 adaptor. The problem looks like it is in the weblogic-ra.xml file in BEA_SAP_1_0.rar. The some of the xml entries for <map-config-properties> loo incomplete:
          <map-config-property>
          <map-config-property-name>bselocation</map-config-property-name>
          </map-config-property>
          <map-config-property>
          <map-config-property-name>bseeis</map-config-property-name>
          </map-config-property>
          Are missing a value tags.
          You can try adding some dummy ones in order to get passed the SAX exception but you may run into more problems. (I was going to install this my self but never got round to it in the end).
          Good Luck

Apple itunes installed network adapter and wiped my wireless out

On Windows Vista x64, I tried to take the update for itunes and it said it failed, to try download only (which has not been working either for me over past year; I always have to uninstall and go to the site to download/install it myself). But my internet stopped working 5 days ago (my wireless adapter inside laptop cannot find any networks ever; nor did my ethernet connection work to overcome this) and my first line of defense was to use sys restore; low and behold, there was an entry for the time period it stopped working that "apple network adapter installed" but no matter which restore point I tried to use anywhere around that event, it always came back with errors and stated no changes were made; still no internet either.
I have uninstalled the hardware thru device manager and tried to let windows reinstall it with drivers, but that doesn't fix it either. I even downloaded onto a flash drive the original driver that has since been updated by Intel for my Intel Link 5100 wireless adapter, but still it will not work. The ethernet did start working once I installed the old original driver for it, but even last night I got the error while plugged into my router "limited connectivity" meaning no internet. I then tried uninstalling all apple programs and kept being blocked from doing so (sounded viral to me so I ran norton power eraser, spoke with support, even used couple other programs for spyware malware bootkit/rootkit etc). Now I finally got all the programs uninstalled, cleaned the registry, and still I cannot get the wireless adapter to work.
I have spent days on this issue, seeing other discussions over the past few years where this has happened before (an update with apple's network adapter installs and wipes out the actual hardware adapter) but each time it only affects certain models of wireless/ethernet adapters. Guess this update got mine. I am trying NOT to have to restore my computer to factory condition as it is over 2 years old and that will mean millions of updates to all microsoft programs, drivers, etc.
Does anyone have any ideas that will fix this? I can send you my specs if you need them.
Sheila

Thx for the suggestion, but this is the post I originally found and figured out what went wrong, However, as I stated in my question post, I have not only uninstalled, scanned for hardware changes (w/o reboot) and rebooted and watched windows install device drivers for both lan & wifi, yet the wifi absolutely will not work now. I have the ethernet working since installing the old original driver, and today I was able to actually get back up to the last wifi driver from intel I had before itunes wiped it out. But still no wifi. My intel program and intel's system checker I used on their website states:
WIRELESS NETWORKING INFORMATION
Wireless Networking Product
Intel® WiFi Link 5100
Driver Version
13.4.0.9
Intel PROSet/Wireless Version
not detected
Software/Driver Status
Newer Driver Available
Latest version available
13.5.0
Hardware IDs
PCI\VEN_8086&DEV_4232&SUBSYS_12018086&REV_00
and I can't get the Newer driver to install without errors stating it will not work with my ACer setup. But at least I got from v12.0.0.73 today to the one above. I reinstalled Itunes today hoping that would fix anything I'd removed and the version was like 10.3.x.x.x. Then I uninstalled from device manager & rebooted hoping wifi network adapter would start working again, but alas, no..
Hope someone can help me soon, cause I've run out of ideas.

Installing standalone adapter engine

Is it possible to install a standalone adapter engine (unix) on an existing j2ee. Say that existing j2ee has other apps running on it already like portal and NWDI?
Thanks

PCK: http://help.sap.com/saphelp_nw04/helpdata/en/99/115281baba404890d2561617a78409/frameset.htm
Do not use SAPINST for this. Just deploy the required SCA files with SDM.
This is the procedure for PCK (adapter engine is similar):
1. Deploy the files aii_af_ra_ms_sonic_client.sda and aii_af_jmsproviderlib.sda (You get them from the installation DVD or from any XI installation)
2. Deploy following sca files, that you get from service marketplace (service.sap.com/patches)
SAPXIAFxx_y.sca SAPXIAFCxx_y.sca SAPXIPCKxx_y.sca
xx = your SP level, y new newest available
You find them under the tree structure:
Entry by Application Group ->
Support Packages and Patches -> SAP NetWeaver -> SAP NETWEAVER -> SAP NETWEAVER (20)04(S)
Entry by Component -> Partner Connect. Kit (PI/XI)
Get the SCA from
-> XI ADAPTER FRAMEWORK CORE 7.00
-> XI ADAPTER FRAMEWORK 7.00
-> XI PCK 7.00
get the file aii.properties from your DVD or an XI installation and put it in this folder:
D:\usr\sap\<SID>\JC00\j2ee\cluster\server0
Adjust the settings with note 746328
Regards
Stefan

Installing Netgear Adapter

Trying to confirm this, if my PB G4 recognizes a PCMCIA network card, then the device will show up in the Network Device list in System Preferences?
I have plugged a card in, installed the software for it, and in Network the only things I see are the standards - Airport, Bluetooth, Internal Modem, etc. The card is a Netgear WN511B, and I installed RALINK drivers. Not sure they will work. I've never used an adapter card in my Mac before, so I just want to be sure I know where to look for the card.
tia, jrh

Hi abrogard,
Welcome to Telstra
Regarding the new modem, in most cases you will need to use the Telstra modem
The exceptions can be found on the following list https://www.telstra.com.au/broadband/adsl-cpe-equipment
You won't need to install the new modem until the transfer has taken place, you can track your order online https://www.my.telstra.com.au/myaccount/track-my-order
If you have account, or order specific questions you can chat with us securely via the following link http://tel.st/49kl
Angela

Re-install DB Adapter

Similar Messages

Maybe you are looking for