Re-install failed to correct missing lsapw32.dll.

When I open Adobe Reader, I'm presented with a window containing the following message:
"This application has failed to start because lsapw32.dll was not found. Re-installing the application may fix this problem."
I then click that window closed and am presented with another, quite similar window containing the same message. When I click the second window closed, Adobe Reader is opened.
To "fix the problem," I un-installed Adobe Reader, then downloaded it again from the adobe.com Web site, and installed it. It didn't fix the problem. Do you have any suggestions?
Thanks.
pleasing-us

There is a similar topic in the Acrobat forum
http://forums.adobe.com/thread/672182 -
does this possibly apply to you too (
TerraGo toolbar)?

Similar Messages

Restore point fails cause of missing MSVCR80.dll. Does aony have a solution ?

My restore point fails due to missing itunes file msvcr80.dll. Does anyone have a solution for that issue ?

turingtest2 post 01/2014: MSVCR80.dll missing, cannot install iTunes - https://discussions.apple.com/message/24618776
iTunes for Windows: Missing MSVCR80.dll - https://sites.google.com/site/appleclubfhs/support/advice-and-articles/itunes-wi ndows-missing-msvcr80-dll - install as administrator.

Install of iTunes on PC fails due to missing MSVCR80.dll file?

The missing .dll file is in iTunes.exe.

Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process.

I did the recommended re-install to resolve the missing MSVCR80.dll file. This worked, but I am now stymied by two error messages: "Apple Mobile Device failed to start" and "Apple application support not found". How to overcome?

That worked, however I now get two error messages when I install I Tunes:
o Apple Mobile Device failed to start.
o Apple Application Support not found.
This were of course deleted in the recommended re-install procedure to resolve the dll file, but repeated uninstalls and installs simply bring up these two error messages with a recommendation to install I Tune again. Installing the new I Tunes version seems to be problematic per the discussion groups and has no simple solution. SHould not the Genius bar be able to resolve this at an Apple Store? Want to buy a new I Phone 5S, but this problem effectively stymies this.

See Troubleshooting issues with iTunes for Windows updates.
tt2

Install fails because file missing from AppleMobileDeviceSupport.cab file

I have iTunes on my Desktop PC and my wife's laptop, both running Windows 7 x64 Ultimate. Automatic iTunes update failed on both with same error. On trying to manually install latest iTunes downloaded from Apple UK website I get the following error message:
"The file 'SyncServicesUI.Resources_English.lproj_Localizable.strings' cannot be installed because the file cannot be found in cabinet file 'AppleMobile DeviceSupport.cab'
Any ideas on how to fix please? Previous version of iTunes was working fine but attempted update seems to have killed it. Wondering if I should try US version instead.

My previous actions were:
0. Tried the Download and Install -- Windows installer just sat there. No progress.
1. Downloaded the jdk-1_5_0_07-windows-i586-p.exe file. Took 5 hours. Checked the file size: 64,949KB matched what the website said.
2. Installed the jdk-1_5_0_07-windows-i586-p.exe file to my D drive in the jsdk1.5.0_07 folder.
3. Set the path to the d:\jsdk1.5.0_07\bin folder.
4. Tried to compile a java file. Received the "javac is not a recognized internal or external command." message.
5. Used Window's Search to search all harddrives for javac.exe. Received two hits, but they were from an Oracle installation (version 1.1.3) -- been there several years.
6. Thought it was a bad install, so uninstalled as directed.
7. Repeated steps 2 through 6 three more times. Still no javac.exe
8. Posted the message.
9. Went back to download site and tried the Download and Install again. Took about twenty minutes before any progress was evident -- guess I didn't wait long enough before :^). Left the download all night (8 hours). This morning, accepted the license agreement, installed, searched for javac*.exe again. Found javacpl.exe, but only the Oracle javac.exe. Uninstalled Java.
10. Uninstalled Oracle (thought the existence of a javac.exe in another location was confusing the installer).
11. Installed from the downloaded file. Searched for javac*.* again. Found the javacpl.exe (two versions -- one in the bin, one in the jre) and a dll file in the C:\Windows folder. Still no javac.exe.
HELP!!!!!!!!!!!

Itunes 10.7 install fails due to missing config file?

anybody have any ideas on this issue. I can't finish the install upgrading to 10.7 in windows vista. it can't find file c;\config.Msi\14e073.rbf. I checked my wife's laptop which has earlier itunes as well and she does not have the file either. Both looking at buying iphone 4s/5 in near futute and a little disturbed with the thought of not having a computer with itunes associated to our phones. any ideas would be appreciated.

What security software are you running on the PC, j? (Firewall, antivirus, antispyware?)

Install failed "APS DAEMON.EXE error. MSVCR80.dll missing" and "iTunes not installed correctly. Error 7

How do I correct Install failed "APS DAEMON.EXE error. MSVCR80.dll missing" and "iTunes not installed correctly. Error 7

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(100246)

Install failed "APS DAEMON.EXE error. MSVCR80.dll missing"

ran the update - install failed "APS DAEMON.EXE error. MSVCR80.dll missing"
Now iTunes is not installed nor running

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

My iTunes update install failed. Error message says MSVCR80.dll is missing from my comuputer. What is that and where do I get it?

My iTunes update install failed. Error message says MSVCR80.dll is missing from my comuputer. What is that and where do I get it?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

When I try to install iTunes 64bit on wndows 7 I get "missing dll" message and install fails...Help!

When I try to install iTunes 64bit on wndows 7 I get "missing dll" message and install fails.
I have restarted my PC. Redownloaded the installer from apple. Checked the hash thingy etc...nothing seems to work...

I am glad you left this up here: nowhere does the error say what the problem is, other than a "missing .dll file." I have seen several other people cite the same issue in detail, but the only responses seems to be 'snarky' -- that the person didn't give enough detail, and that they aren't mind readers.

This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem.

I recently tried to download the latest version of iTunes, but an error occured during the process. It was recommended that i reinstall iTunes to attempt to correct that problem. After I attempted to reinstall, an error came up with the title "iTunes.exe - Unable to locate component." the body of the error message read "This application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix this problem." When I click "Ok", another error message pops-up reading "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126)". I tried reinstalling iTunes 3 times now, each time with the same result. What is going wrong, and what do I need to do?

Kappy, I completely overlooked your original response due to it's small, one line nature and poor UX design of the area surrounding the message area.
Upon following the complete instructions linked from the link you posted (http://support.apple.com/kb/HT1923?viewlocale=en_US&locale=en_US), my first attempt resulted in everything being installed except for iTunes. So trying yet again.
I do have Safari for Windows Vista installed, which is why I could not delete everything in the C:\Program Files\Common Files\Apple\ folder. I'm guessing this is Apple's way of completely removing Safari Win from history (there's always an under-the-table reason when something like this happens with Apple installs, they just won't say it publicly). Uninstalling Safari. Uninstalling Safari removes the remaining "Internet" files from C:\Program Files\Common Files\Apple\
Uninstalling iCloud. Uninstalling MobileMe Control Panel that was never used. That leaves only QuickTime installed as an Apple product on my machine.
Just for the record, I did not have this folder: C:\Program Files\iPod\
Emptied the Recycling Bin.
Shut down and fresh start-up.
Install attempt again: results in the installer saying something interrupted it (no other programs open)
Installing again immediately after error: Success
Clearly there are issues with this installer.
A pop-up shows up with "The registry settings used by the iTunes drives for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burining software. Please reinstall iTunes"
No other CD burning software installed other than what came pre-installed by Gateway and a install of Windows Vista Pro (or whatever the top expensive one was called).
iTunes launched. iTunes Library, items like Movies & Music, and playlists are still intact and usable.
Good thing I don't have these issues on my Macs (ahem, which is why these errors are allowed to persist by Apple to discourage Microsoft/Windows/PC use and purchase, all about the money and Apple has become the non-caring giant it once sought to overthrow as the underdog, miss those days).
Thanks Kappy. Thanks for the time suck Apple.

I get an error message..failed to load...missing msvcr80.dll

Itunes showed me that an newer version of Itunes was available. after downloading i get an error message "This application has failed to start because MSVR80.dll was not found..Re-installing the application may fix this problem. I then uninstalled Itunes and reinstalled and get another error mess that itunes was not installed correctly "error 7(windows error 126)"
I ran an sfc/scannow which i am shown that " resource protection found corrupt files and was unable to fix some of them"
How do i get the missing msvcr80.dll.

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

My i tunes is not working anymore. it says the application failed to start because MSVCR80.dll was not found. I have tried re-installing the program but it doesn't work.

Hello,
Yesterday I tried to get onto iTunes and was unable to. I keep getting this message:
Itunes.exe - Unable to locate component.
This application has failed to start because MSVCR80.dll was not found.
Re-installing the application may fix this problem.
I have tried to uninstall and re-install the program several times but cannot get it to work. Now I get this message:
iTunes was not installed correctly. Please reinstall iTunes.
Error 7 (Windows error 126)
I have tried to do what I can but am not really iTunes savy and would like to get this issue resolved. Can anyone help me?
THANK YOU!!
Cyn

Hello there, Cyn.
The following Knowledge Base article provides some great information for troubleshooting your issue. Keep in mind uninstalling and reinstalling has to be done in a very specific fashion, therefore use the guidelines from this article to accomplish this:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

HT1926 I try to download Itunes and when i am done it i tried to open it and it said "This application has failed to start because MSVCR80.dll was not found. re-installing the application may fix this problem"

i tried to open itunes and it said "This application has failed to start because MSVCR80.dll was not found. re-installing the application may fix this problem" and "itunes was not installed correctly. please reinstall itunes. Error 7 (windows error 126)" what does this mean and how do I fix it? I reinstalled itunes and this just popped up again :C

See Troubleshooting issues with iTunes for Windows updates.
tt2

Oracle Initialization Failed -- likely missing libraries/dlls

Hi,
I've installed MDM 5.0 server with oracle 10.2 as the database on Windows 2003 server.
When I try to create a repository for the first time I'm facing the following issue "Error initializing database engine"
The log says:
Oracle Initialization Failed -- likely missing libraries/dlls
OCI Init
ERROR CODE=0 |||
Last CMD:
I'm able to connect to the database through SQL plus also the tnsping tests are successfull.
Please let me know your ides to resolve this issue.
Regards,
Varadhu

Hi Varadharajan,
Can you provide the detailed steps performed to resolve the issue.
Even we have installed MDM 7.1 SP 10 Oracle 11.2.0, But we have 3 SAP instance running on the system:
1) SRM:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
2) CRM:
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit
3) MDM:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
when the server is restarted the MDM is not able to connect to the Database.
Thanks to provide the exact steps of execution.
Regards,
Prajakta Patkar

Re-install failed to correct missing lsapw32.dll.

Similar Messages

Maybe you are looking for