Re-install FCP Studio issues.

I am trying to reinstall FCS on an iMac that I just reformatted and took to Lion.  I installed FCP7.0 then tried 7.03 update.  Doesn't install.  Do I need 7.01 or 7.02 first?

I assume you are using Software Update?
One of the main reasons for FCS not updating is because one or more of the apps have been moved from the Applications folder or had their name altered.
You don't need earlier updates, however, be aware that the update will probably not be called FCS.
You should also allow Software Update to update every other Mac item it can.

Similar Messages

  • Problem Installing FCP Studio 2 on SL 10.6.2

    Hello All
    when trying to install an original FCP Studio 2,
    the installation gets stuck towards the end. (around 95% of the first general installation disk).
    this has happened 3 times.
    After rebooting, the programs seems to be in the application folder.
    but they are missing many files and meterial.
    ( because i did'nt get a chanse to go through the other Content disks... )
    did anyone had a problem installing FCP Studio 2 on SL ?

    Here's a way to work around the possiblitily of a damaged disk or an intermittent dvd reader.
    Insert your FCS install disk, make a disk image of it (using Disk Utility) and leave the image on the Desktop. Eject the FCS install disk, and create a disk image for each of the FCS disks.
    Now, with all the images on the desktop, double click on the install disk image and start the installation process. It should take less than an hour to install EVERYTHING.
    Once the installation is complete, copy the disk images to a safe place. You'll have them available if you ever need to reinstall FCS.
    good luck,
    x

  • Do I need to uninstall FCP before installing FCP Studio 2?

    Hi all, I have Final Cut Pro Studio, FCP 5.1.4, Academic version, and recently got Final Cut Studio 2, and just wanted to check to see if I needed to completely reinstall FCP, or would just installing FCP Studio 2, do the trick?
    Thanks

    I'm still trying to figure out my plan of attack for installing FCS2 when it arrives today.
    Randy, do you at least delete the apps before installation, or do you just put the DVDs in and go?
    Most folks around here preach the complete reinstall of the OS and then installing FCS2...you don't agree?
    Just trying to get all opinions here...you are cleared of any blame when/if something goes wrong!

  • Install FCP studio to external drive

    I want to install FCP studio to my macbook pro and install all supporting media to an external drive so i don't waste space. has anybody done that.
    thanks
    macbook pro   Mac OS X (10.4.9)  

    As Jerry notes, templates can be installed on a non-system disk.
    Pay close attention during the install process when you are given Options. A number of people have clicked through those moments without paying much attention and placed all there support files on the system disk - much to their dismay.
    good luck.
    x

  • Re-Installing FCP Studio, Uninstall First?

    Can anyone give me some advice? I have been having problems first with Compressor, and now I can't even open FCP. A friend suggested I reinstall everything.
    My question is: do I have to uninstall everything first? If so, does that involve trashing just "Final Cut Pro" - or also "Compressor," "DVD Studio Pro," etc., since they all come together on the FCP Studio discs.

    OK. Will download and try that now.
    Here are the details: first Compressor just stopped working. When I tried to export a FCP sequence using Compressor, I would get an error message that said the file name was already in use. And then the batch would fail. It was frustrating because it came out of nowhere. But FCP was still working.
    Then a seemingly separate issue: yesterday afternoon, I installed a printer driver using the original OS X disc. After that, FCP stopped opening. When I try to open the application, I can see the icon blink for a moment on the dock, but it closes again jsut as quickly. I've tried opening it from "Applications", from my project - nothing works.
    So. Not sure how to proceed. I will try FCP rescue right now.
    Thanks!
    R

  • Installing Management Studio issue

    Greeting.
    Attempting to install Management Studio on a Win 7 box and am having an issue, apparently reading the registry. Since the account used is local admin, not sure why this is occurring. Any assistance would be welcomed.
    Steps Taken:
    0) Rebooted the machine
    1) Logged in as Admin on the local machine
    2) Copied the installation package to a local folder
    3) Ran 'setup.exe'.
    4) Chose 'New SQL Server stand-alone installation or add features to an existing installation
    Outcome:
    'SQL Server Setup has encountered the following error:
    Failed to retrieve data for this request'.
    From the logs located at: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\Detail_GlobalRules.txt
    Log Entry (last section):
    (01) 2014-05-19 13:34:09 Slp:         Inner exception type: System.UnauthorizedAccessException
    (01) 2014-05-19 13:34:09 Slp:             Message:
    (01) 2014-05-19 13:34:09 Slp:                         Attempted to perform an unauthorized operation.
    (01) 2014-05-19 13:34:09 Slp:             HResult : 0x80070005
    (01) 2014-05-19 13:34:09 Slp:             Stack:
    (01) 2014-05-19 13:34:09 Slp:                         at Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.OpenSubKey(String subkey,
    RegistryAccess requestedAccess)

    Hi Zeke,
    According to your description and error message, HRESULT value 0x80070005 means "access denied". Typically this happens due to a permission problem on one of the directories under \windows\ or the registry.
    As Shanky post, when you run setup.exe, you should select “ run as administrator”. In addition I suggested looking at any anti-virus or anti-spyware software because they tend to lock down files and folders to prevent malicious programs from installing.
    For more information, please refer to How to fix some 1935 errors with HRESULT 0x80070005 (access denied) when installing the .NET Framework :
    http://blogs.msdn.com/b/astebner/archive/2005/08/16/452523.aspx
    If this not work, could you please help us to collect the detailed error message and the error log. It is very useful for our research, so that more forum members can involve into the thread and help you out.
    Regards,
    Sofiya Li
    Sofiya Li
    TechNet Community Support

  • Installing FCP Studio Uninstall Express HD 3.5?

    I just bought FCP studio(Academic Version), but before I install it should I uninstall Express(version above.) ? Live Type ? Soundtrack? I was planning on using Express on another machine so would like to have these programs on that since I paid for both.
    MacProG5   Mac OS X (10.4.8)  

    You do not need FCE HD 3.5 before you install FCS. The installation for FCS will be shorter because LifeType (including livetime fonts (about 6GB) don't need to install. You can use both versions on one machine. However when you install FCE HD on another machine you may not use the program (FCE HD) the same time. Look in the legal information.

  • Trouble installing FCP studio 2

    During installation of FCP studio 2, I am asked to insert the Audio content disk 1, then I am asked to insert the Final Cut Studio disk again. After a couple of minutes the installation stops and tells me that there are errors and that I should reinstall. I have tried after a clean reinstall of Tiger. Does anybody have some advice?
    Boaz

    Try the clean install again.
    If you have problems in the same place twice, you may have a defective install disk. A call to Apple is in order. There should be free installation support for 90 days.
    Good luck.
    x

  • Need to install fcp studio 2 on my new second generation i7 iMac

    I used to own mac book pro 17" and had fcp studio 2 on it. I decided to purchase imac 27" i7 second generation and tried to install fcp studio2 on it but I get the following error "you van't open the application FinalCutStudio.mpkg because PowerPC applications are no longer supported"
    I need help to get around this as i didn't like Final Cut Studio X

    There are some possible solutions in this thread.
    https://discussions.apple.com/message/15540498#15540498
    Read all the way through to the end as there are several  strategies.
    Message was edited by: Ian R. Brown

  • Newly INstalled FCP Studio Universal - No Firewire Recognition!

    I use a Canopus ADVC-110 via a Firewire to digitize from analog sources and feed my timeline to an external monitor.
    Since I installed FCP Universal, I cannot get the software to acknowledge that there is a firewire device connected to the computer. I trashed prefs and still - no recognized firewire device.
    Any help out there???

    Check out this link:
    http://docs.info.apple.com/article.html?artnum=301852
    whether it works in your situation or not, I don't know, but I don't think it can hurt.
    Good luck.

  • Permissions issues and installing FCP Studio - admin has no privileges

    Hello
    Compressor 2.01 was crashing to I pulled out the universal binary updater discs and decided to finally upgrade. When I run the installer, I get the following error when I input my serial number:
    "Licensing Error: The license file will not be written to disk because the user does not have enough privileges."
    I am an Admin user on the Mac.
    I recently (this morning) ran Disk Utility and fixed permissions. I also booted into single user mode and ran FSCK. Those things are supposed to FIX permissions issues, not cause them, right?
    I also ran permissions fix a few minutes ago - after I got this message. The error message still pops up.
    What can I do?
    Thanks,
    -----------------S

    Thanks for the overwhelming response.

  • Help... Installing FCP studio on a third system...legally

    My MacBook broke and I want to install FCP7 on my new Macbook but want to keep it on my iMac.
    Is it impossible to install onto a third device? I have all the disks.
    Much love

    It's discontinued software that Apple clearly doesn't care much about...  There may be some problems getting it to install with the newer OS, so read the archives about that.
    But go ahead and install Studio on your new MacBook; there is no magical installation counter, it's just that you can't have it running on two networked Macs.

  • Can I re-install FCP Studio (FCP7) without Install CDs?

    My MacBook Pro (Spring 2011) hard drive died recently. The Apple Store replaced the 320GB hard drive with a 500GB hard drive. However, I lost all my applications, programs, and documents stored on my internal drive. Thank God I saved most of my content on an external G-Drive.
    Is it possible to reinstall Final Cut Studio HD (Final Cut Pro 7, etc.) without the install CDs? I have the product key and support ID.

    How can you install it without having the installers? What would you install from? 
    It's like trying to bake bread without having flour.  Or wheat! 
    It doesn't just appear out of nowhere.

  • TS2594 how to install fcp studio in mac pro book i7

    hi
    iam buy new final cut studio 2 an mac pro book
    how to i instaled final cut studio 2 in my mac pro book core i7 2.4Ghz
    tel me plz wats the solution.....

    Find an old copy somewhere that a dealer still has in stock. But why?

  • Cannot install fcp studio contents

    Hi there, has anyone run into the problem of not being able to install the content DVDs of FCP5? If I select the softwares, fcp, dvdsp, motion, & soundtrack then they installed fine but cannot install their contents DVDs. Pleaes helps.
    thankx
    JP

    What happens when you try?
    Shane

Maybe you are looking for

  • Intel mac mini wont boot after system restore

    Hi, I ran the system restore on my intel mac mini using the genuine leopard cd that came with it. Now it wont boot. When you press power the light comes on but it does not chime and there is not video output to any monitor. Anyone know what could be

  • Authorization to generate a report

    Dear all, In our environment, different Zenworks administrators have their permission to manage devices on the folder in device zone. How can I setup an authorization right for them to generate the limited report?? (only the device in the specify fol

  • Content Presenter Portlet (CPP) on weblogic portal 10.3 giving error

    Hi, We are using WLP 10gR3 & UCM 10gR3 in our environment. We've done a new installation on portal following the checklist which is working fine on a working env. On portal application CPP giving error Content Presenter Portlet giving err-An appropri

  • Case statement with Subquery

    Case statement with Subquery select case when condition then i want to execute qr1 else qr2 How to implement this ?

  • "What you hear" recording volume is too

    I have Soundblaster Audigy 2 on Vista 64-bit. I recently downloaded new drivers (6.0..242). This is after converting from XP and old drivers. My "What you hear" settings work and will record using MediaSource Player, but the volume on the recorded fi