Re-Install Help Required

HAPPY NEW YEAR!
I have an old Maxstor 160GB which is now a very handy paperweight. Due to the inadequacies of a Simply huge computer supply company I acquired an 80GB SATA drive supplied for a PC at work. DOH! Anyway, I have now invested in a 76Gb Raptor for the primary drive and a 400Gb Barracuda as the data drive.
I want to install these new drives and was hoping that one of you learned people would advise of cloning/back-up techniques that would enable the most efficient method of doing this, bearing in mind that I have the 80Gb installed now enabling this rather feeble question to be posted here.
Thanks in anticipation

Tankman:
I personally like Carbon Copy Cloner for cloning. I also use it to incremental backups. If you decide to use it be sure to go into Preferences and check boxes to make bootable drive and synchronization and whatever else you need for your situation.
Here is Dr. Smoke's advice on backup and recovery.
Post back with questions.
Good luck.
cornelius
PB G3 Pismo400, 100 GB 5400 Toshiba internal, 1 GB RAM   Mac OS X (10.3.9)   Beige G3 OS 8.6

Similar Messages

  • BI-Content Install Help Required Please....I am Stumped

    I've just installed NW 2004 SP1, successfully with ABAP+JAVA on one machine. Am presently applying support package stack 14. When I try to install the BI 3.53 Content add on I am having problems...:(
    The system does not seem to have BI-Cont installed, I verifed this by checking SPAM. All I could see was SAP_ABA, SAP_BASIS, PI_BASIS, SAP_BW
    I was under the impression that BI Cont gets installed automatically as part of the BW UDI Java Components Install...am I right? or am i doing something wrong? or have i missed a step in my installation process listed below.
    I installed a central instance, a dbase instance, then added the Java Add-In for Abap, before installing the BW UDI Java Components.

    Hi Peter,
    I am trying to install BW on windows environment,ECC5.0 ERP 2004 version.
    Can you tell me the steps involved after the r/3 istallation.
    I can see SAP_BW in Saint.
    I want to install BW 3.50.
    Thanks & Regards
    pradeep

  • Help required with Photoshop Elements 4.0 this has been installed on my new Toshiba laptop with windows 8.1 for some 18 months and operating well. Now it will not open, message pops up saying "attempt to access invalid address" then "application not respo

    Help required with Photoshop Elements 4.0 this has been installed on my new Toshiba laptop with windows 8.1 for some 18 months and operating well. Now it will not open, message pops up saying “attempt to access invalid address” then “application not responding” Suggestions how to access would be much appreciated. Tks. Stuart

    What is the size of your hard disk?  PSE 4 is a very old program and I suspect it is not able to access the entire hard disk on your machine.  Just a thought here.

  • Help require with installing Adobe Acrobat onto my Macbook Pro Retina.

    Help require with installing Adobe Acrobat onto my Macbook Pro Retina.
    I have successfully installed all of my creative cloud apps with the exception being acrobat.
    I cannot print from Indesign to PDF.
    I have unistalled, reinstalled and still no Adobe Acrobat.
    I now have to go back to Windows 8 and create the PDF's there.
    Any one know how to get around this issue?
    Thanks in advance
    Kelvin

    OSX has effectively killed the ability to print to pdf, (print to pdf eliminates most of the "Rich features" of current pdf).
    Export from InDesign, always, excpet for the 1% of the time where you know why print to pdf would produce a better result.

  • FREE TRIAL ON PAGEMAKER INSTALLED, BUT REQUIRES STUFFIT FOR FINAL STEP.  CAN'T SEEM TO MANAGE THIS STEP. NEED HELP MANAGING THE FINAL STEPS BEFORE PAGEMAKER IS USEABLE.  THANK YOU

    HAVE INSTALLED PAGEMAKER, BUT BECAME CONFUSED WHEN "STUFFIT" SEEMED TO BE REQUIRED FOR NEXT STEP.  NEED HELP IN FINAL STEPS IN DOWNLOADING PAGEMAKER FOR USE.

    >I would like to purchase a new mac with the appropriate operating system that will
    run pagemaker 7.  If not, I understand that my current mac, Mac OS X, version
    10.6.8, processor 2.8 GHz Intel Core i7, Memory 4GB 1067 MHz DDR3 will not support
    either Pagemaker 7 or InDesign.  My question is what package can I purchase that
    will satisfy one or both of these needs?  Thank you for any guidance.
    R_Kelly  created the discussion
    "FREE TRIAL ON PAGEMAKER INSTALLED, BUT REQUIRES STUFFIT FOR FINAL STEP. 
    CAN'T SEEM TO MANAGE THIS STEP. NEED HELP MANAGING THE FINAL STEPS BEFORE PAGEMAKER
    IS USEABLE.  THANK YOU"
    To view the discussion, visit: https://forums.adobe.com/message/6607524#6607524
    >

  • QuickTime version 7.1 is installed, iTunes requires QuickTime version 7.1.3

    QuickTime version 7.1 is installed, iTunes requires QuickTime version 7.1.3 or later. Please reinstall iTunes.
    That's the error message I have gotten for the past 3 days since trying to upgrade itunes. I have the newest quicktime downloaded, have deleted itunes and quicktime and redownloaded it all, and it still won't work. I have NO idea what to do to make this work, but it's driving me crazy. If anyone can help, please give some advice.

    You can try to fully remove both iTunes and Quicktime. Then reinstall the software again. The following link will walk you through the removal of both programs. Make sure you complete Step 16 in the article. Good luck.
    http://docs.info.apple.com/article.html?artnum=93698

  • "Quicktime version 7.0d0 is installed, iTunes requires Quicktime version...

    "Quicktime version 7.0d0 is installed, iTunes requires Quicktime version 7.0.3 or later.
    Please re-install iTunes."
    This just popped up when I opened iTunes today. So I re-installed itunes from the website. I try and open it and the message keeps coming up. I have tried re-installing several times and restarting my computer, but it keeps coming up.
    Any help fixing this problem would be greatly appreciated, thanks.

    Yeah same here, all started when I tried to upgrade
    to version 6.
    YESSSSS!¬!!!!
    Thankyou everyone - SORTED!
    1) turn off your virus protection software
    2) deinstall QUICKTIME only (standalone)(click onlink below)
    3) reboot - turn off virus protection
    4) resintall QUICKTIME only (standalone) (click on line below)
    5) reboot
    Heres the link : http://www.apple.com/quicktime/download/standalone.html
    should work! worked for me! GOOD LUCK

  • Quicktime version 7.0d0 is installed, iTunes requires Quicktime 7.0.3...

    My error message is: Quicktime version 7.0d0 is installed, iTunes requires Quicktime 7.0.3 or higher. Please reinstall iTunes.
    This all started when I was trying to upgrade. I have downloaded the new quicktime and when it came to the option of reparing or uninstalling, I chose repair.
    I read through other problems, but didn't find this error message.
    Can anyone please help me? In a way in which I don't lose my library?

    Sorry. Um. Try to completely remove the Quicktime program from the Add/Remove directory via Control Panel. Reboot your computer. From the Apple website Save the Quicktime program to your Desktop (i.e., rather than "run from this location.") Install Quicktime by clicking on the Quicktime install program that should be present on your desktop. When it is done, reboot your computer.
    http://www.apple.com/quicktime/download/standalone.html
    I hope that that is the correct link.

  • Urgent help required about nokia N8

    I was updating my phone software whine installation suddenly power off and my phone turn off... Now when I switch on it nothing papers on screen please help what should I do....? 

    @MHassan125
    A black screen usually indicates device still in flash mode and a visit to Nokia Care facility for device software to be re-installed is required.
    Happy to have helped forum with a Support Ratio = 42.5

  • Help Required - Oracle AS 10g

    hello,
    i have just downloaded oracle 10g softwares ...
    i installed database then developer suite ... everything was fine ... until i was unable to run forms ...
    a friend of mine told me that i need to install application server in order to run forms ...
    1st of all i want to know that is there any way i can run forms without using Oracle AS 10g ...
    2ndly i m facing problems in installation of Oracle AS 10g ...
    i have studied online documentation but it ain't so helpfull for me ...
    it seems like ... i have to install "Oracle AS infrastructure" first and then "Middle-tier: Business Intelligence and forms" ...
    i m using P-IV (AMD Athlon XP 2100+, MMX, 1.7GHz Processor) with 512 MB DD RAM and Windows XP Professional with Service Pack 2 as Operating System.
    During installation, the installer is warning dat only "Oracle Application Server (J2EE and Web Cache)" and "Oracle Application Server Developer Kits" are supported installations on dis platform ...
    what should i do ... urgent help required ...
    regards,
    yasir ([email protected])

    @ brusardl and rkogelhe
    thanx for replying ...
    brusardl
    i didn't changed da port while installing Oracle AS ...
    inspite i stopped all services using/listening from dat port ...
    now ... i guess there has been some conflict ... as database listner stops automatically just after starting !!!
    rkogelhe
    can u plz tell me what is BI version of Forms ...
    and can i view forms running on web without installing Oracle AS with OC4J bundled in Forms ???
    Another Problem:
    I re-installed Database, Developer suite and then Oracle AS infrastructure ...
    everthing went fine ...
    when i installed Oracle AS Middle Tier - Business Intelligence & Forms
    during installation ... some configuration assistants failed/skipped ...
    da OC4J configration assistant at 5th last position failed ... so remaining 4 configuration assistants were skipped ...
    at da end it said ... Installation Succesfull but with some configuration assistants failed/skipped ...
    is dis a installation useless ... can i fix dis ?
    regards,
    yasir

  • Help required with (soundcard) connection / settings, thanks in advan

    Help required with connection / settings between a Creative Sound Blaster Audigy Platinum EX (soundcard) and a Creative DTT3500 Digital (5. speakers).
    The problem
    No sound from any of the speakers. (Exception can plug in headphones at front)
    Background
    My computer has been recently upgraded at my local computer shop and all programs re-installed (including driver update from Creative's website). However after reconnecting speakers and restoring the original settings I?m getting no sound from any of the speakers. I?ve followed all the available advice/instructions I can find on this website and manuals to no avail.
    Set-up
    Physical
    (Digital DIN) Speakers/decoder amplifier (DTT3500) connected to the (digital out) soundcard (Audigy Platinum EX) using minijack to DIN cable. (As per instruction manual)
    Software
    Creative Audio Consul ? setting as per instructions, however have tried variations in vain. (Note: above tabs there is a select device box with SB Audigy [A0000] in it ? only option. Just wondering what [A0000] means?)
    Your advice please. A simple step by step guide would be appreciated, many thanks in advance, Jon

    "My computer has been recently upgraded at my local computer shop and all programs re-installed (including driver update from Creative's website). "
    Do you have the original installation disk?
    If so, try installing THOSE drivers, ESPECIALLY if it worked before. Be sure to uninstall what is there now, first.
    Its natural for most people to want the 'latest' drivers for their hardware. However:
    After experiencing some difficulties with some CL 'updates' for certain products, I now avoid them UNLESS I am having a PROBLEM with the existing drivers.

  • "The software required for this iPhone is not installed correctly. Please reinstall iTunes to install the required software." I get the same error on my iPad.

    I upgraded my itunes to 10.6 and now I get the error "The software required for this iPhone is not installed correctly. Please reinstall iTunes to install the required software." I get the same error on my iPad. I've tried uninstalling and reinstalling. Please help!!

    Edit: 10.6.3. I have uninstalled using the uninstall programs on itunes and then I downloaded again from the itunes website multiple times. This is not resolving the issue. The phone shows up in My Computer.

  • This extension cannot be installed, it requires Photoshop32........

    I have a client who is trying to install my extension panels into Photoshop CS6. In the ZXP file there are two panels that are suppose to get installed. Only one gets installed. Both panels were created with Configurator 4 and were packaged together with Adobe Exchange Packager.
    Here is the kicker: The client has two computers running Windows 7 and Photoshop CS6. He was able to successfully install both panels on computer one, but only one of the panels was installed on computer two. When trying to install on computer two he gets this message "This extension cannot be installed, it requires Photoshop32 version in range of inclusively 13.0 to 13.9". Does anyone have any idea as to what this message means?
    Being on a Mac, I don't have a clue as to what the issue could be.
    Thanks in advance for your help - Sam

    His Extension Manager on the second computer might be out of date. I recently tried to install an extension for Photoshop CC, but when I went to double click on the extension it used the Extension Manager for CS6. So I received a similar message. Once I downloaded to correct Extension Manager it loaded correctly.

  • "the extension cannot be installed it requires flash-" error

    I am attempting to install my flash command extensions that I was using under Flash CS5 for CC, using Extension Manager (EM) CC.
    I am writing the MXI file myself in order to do this (and packaging them with EM CS6), but I constantly get the error "The extension cannot be installed it requires Flash version 8 or greater".
    I think the manager is reacting to the product tag which is currently set as
    <products>
      <product familyname="Flash" version="8"/>
    </products>
    I DO have Flash installed, and it is higher than 8 so why am I getting this error? I've tried changing the version number and doing away with the products tag all together but this doesn't help.
    Flash & Photoshop are the only CC programs I have installed and they are showing in the sidebar in EM CC
    The command is definitely compatible with flash as I can install it by simply putting it in the right place, but I wanted to circulate this to my colleagues without explaining how to find the config folder.
    Thank you for your help,
    The whole MXI is below
    <macromedia-extension
      type="flash command"
      version="1.0.0"
      requires-restart="false"
      name="Bitmap Properties">
      <author name="Tom Evans" />
      <products>
      <product familyname="Flash" version="8"/>
      </products>
      <description>
      <![CDATA[command to multi-edit bitmap quality in flash library. Automatically sets smoothing on but asks what quality to set the JPG compression]]>
      </description>
      <ui-access>
      <![CDATA[Adds command to Commands Menu]]>
      </ui-access>
      <license-agreement>
      <![CDATA[CDATA[Tom Evans provides this extension 'as is' without any warranty of any kind as to the suitability of the extension for the licensees intended purpose. All risk as to the performance of the extension and it's contents are the sole responsibility of you, the licensee.]]>
      </license-agreement>
      <files>
      <file source="BitmapProperties.jsfl" destination="$Flash\commands" />
      <file source="BitmapProperties.xml" destination="$Flash\XULControls" />
      </files>
    </macromedia-extension>

    Have this one :
    http://www.youtube.com/watch?v=b7i7EAFl9NY
    Have the last version :
    http://www.univers-web.com/flash/Plugin_flash/KeyframeCaddyCS6.zxp
    Have my chanel xD
    http://www.youtube.com/user/nakedbat/videos

  • Nokia car kit CK100 install help Audi TT 2003 conc...

    Hi 
    As per subject line. I have Nokia car kit CK100. And require install help for Audi TT 2003 concert radio & Bose. What additional wire harness do i need?
    I'm seeing lots all over ebay and the internet... And getting confused. And is it a simple as buying the lead and plug & play??
    Getting contradicting advice, some say as it bose it needs to be hooked up to the fuse box etc....
    Any help appreciated....

    More information as to what is required upon Page 148 of this resource:http://www.armourauto.com/sites/armourauto.com/files/AUTOLEADS_CATALOGUE_HandsfreeFittingSolutions.p...
    Have to say in UK would approach Nokia Accredited Carkit Installer to get it right first time!
    Happy to have helped forum in a small way with a Support Ratio = 37.0

Maybe you are looking for