Re-install of iTunes after PC crash using additional Authorised User

The hard disk on my PC crashed which had XP x64 OS. The system was reformatted with XP Pro installed given previous issues with the other OS. When I re-installed iTunes and my backup music files, I am not permitted to authorise the PC saying that all 5 authorisations are used.
My family use the other 4 authorisations, but this computer had the 5th. Why after the re-install am I being requested for an additional authorisation. Can't it remember that this PC was previously authorised??
Stuck with 1000s of purchased songs I can't play
Please Help...

Hard drive crashes and new installations use up authorisations, crashes you can't do anything about but it's worth bearing in mind before you do reinstall your OS. However If you reached the limit of 5 authorisations, you have the option to de-authorise all computers once a year and start with a fresh set up for the computers that you've got:
About iTunes Music Store Authorisation and Deauthorisation

Similar Messages

  • I had to do a re-install of Thunderbird after a crash. How do I get my old address book into my new one?

    I had to do a re-install of Thunderbird after a crash. How do I get my old address book into my new one? There are only a few of the contacts I had, so there must be a location where the rest are, but not sure where to look. And once I find them (with your help), how do I get them into the address book?

    If you copy abook.mab or history.mab into a profile folder, they will show up as Personal Address Book and Collected Addresses. But if the mab files have names other than abook or history, they can only be imported to TB with the use of [https://nic-nac-project.org/~kaosmos/morecols-en.html MoreFunctionsForAddressBook].

  • I followed directions to restore ipod contents to iTunes after computer crashed. Now my ipod is dead.

    I followed directions to restore ipod contents to iTunes after computer crashed Now my ipod is dead. iTumes does not recognize it; the device is not showing in the left pane.Can I do something?

    Try:
    iOS: Not responding or does not turn on
    If not successful, make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • ? How to recover APPS from iTunes after system crash

    I think we need a sticky for this.
    Is there a tutorial or instructions to recover ALL your iPhone/iPod Touch apps from your PC or iTunes after a system crash and iTunes is no longer accessible even after uninstall and reinstallation? I heard one can call Apple Support and have them do a one time reset but for people like me who have more than one iTunes account that may be a problem since it would require several accounts.

    Ok....i have some good news, I believe. Using King_Penguin's link and Apple's KB seems to have worked. I tried this under another windows profile on the same machine. The TRICK is to hold down CTRL W when opening up iTunes. This will prompt you to tell iTunes where the library is. The key is to copy everything from your My MUSIC\ITUNES folder. More info here: http://support.apple.com/kb/HT1751
    What is throwing me off is there is another option to, "Create LIBRARY". Not sure how that works. But the instructions are here: When you need to restore your backed up iTunes Library from your external hard drive to your computer, follow these steps:
    1.Quit iTunes.
    2.Locate your external hard drive.
    Mac: On the Desktop or Finder sidebar.
    Windows: In My Computer
    3.Drag the iTunes folder (backed up earlier) from your external hard drive to whatever location you desire on your internal hard drive. It is recommended that you choose the default location for the iTunes folder, which is:
    Mac OS X: /Users/username/Music
    Windows XP: \Documents and Settings\username\My Documents\My Music\
    Windows Vista or Windows 7: \Users\username\My Music\

  • How do I regain ITunes after pc crash

    How do I regain iTunes after pc crash

    Restore your lost data from the most recent backup you made of the PC before it crashed.

  • Lost all my music in itunes after computer crash

    Lost all my music in itunes when computer crashed.  itune store doesn't show all my purchases.  How do I get all my music back?

    Browse your iTunes folder.  Do you have files in folder in your media folder?  In other words, did you really lose the media or did iTunes just lose track of it?
    Of course you have a backup you make of your computer before doing any major updates, right?

  • My Iphone will not sync with my itunes after I had to change my user and pass on my pc.  How can I fix this problem?

    I had to reset my username and password on my computer because I must have hit a wrong key when changing password.  Anyway I made a new admin user on my pc and now my iphone will not sync all the way with my itunes.  I flashes a message on the screen saying "you do not have the proper privileges" and stops the sync.  All of my contacts are gone and all of my google calander is wiped clean.  I just want my Iphone to sync now so that I can add contacts again.  What can I do?  Thank you for your time.
    rfondrick

    bogdan0,
    Tried that but did not work.  Thank you for the reply.  However, I did find the correct thing to do though so wanted to share.
    Since on my computer I had to create a new admin account,  I had to go into the shortcut properties of Itunes.  Then hit Compatibility Tab.  Had to check Run as Admin.  
    After hitting Change settings for all users it worked just fine.

  • Re-installing iTunes after computer crash and syncing Ipods

    Our computer recently crashed, and needed to be completely wiped out and reset.... unfortunately our tech was unable to back-up our music files. I have all our music saved onto my iphone and an ipod nano....
    So now that I had to re-install itunes, and each ipod can only be synced to one library, does this mean I have to erase all the songs on our ipods, and start from scratch??? Or is there a way around this?

    Restore the iTunes library from the backups you were keeping regularly of your computer.

  • Reinstall Itunes after disk crash

    Hi folks
    Maybe a simple question for You, but not for me :o)
    Three weeks ago the disk on my HP Pavilion DV8 crashed. The operatingsystem is Windows 7.
    Today I received y HP with a new harddisk, and a new Windows 7 installation.
    After having installed a lot of programs, I also install Itunes.
    But what will happen the first time i connect my Iphone 3GS?
    Will al data on the phone (contacts, calendar data, applications and so on) be delete on the Iphone?
    What to do to save all I have?
    Best regards
    Carsten

    You need to copy everything from your backup copy of the old computer to the new one.
    When you sync the itunes content ( apps/music/vid) will be erased and replaced with content from the new computer.
    If you sync contacts and calendars to a blank computer, then those will be erased as well.
    One of the many reason that always maintaining a backup copy is so basic, is the very situation.
    Use your backup to put everything on the new computer.

  • Reward offered for helping me restore ITUNES after a crash

    please help. I have looked everywhere on my PC and am using windows XP. It tells me it has been defaulted to a MY MUSIC folder but cannot find that either. Please. If you can help restore my ITUNES I will make it worth your time. I have paypal. thanks. I will be more that happy to reward some one. Am at wits end.

    I remember a lot of the songs I had. I did not know the computer had a problem (ITUNES was open at time of crash)and I saw that the screen was blue and had writing on it. I decided to shut it down. After 5 minutes I rebooted and discovered my itunes library had vanished. The logo is still on the desktop but all it says is that itunes cant be found unless you go to default MY MUSIC folder. It wasnt there. Jeff

  • Can't restart iTunes after a crash

    I've been having this problem off and on for several years now, and it's raised its ugly head again today. With varying frequency iTunes crashes on me. Not normally a huge problem, just restart. However, occasionally iTunes crashes but doesn't actually leave the dock. As long as it's in the dock I cannot relaunch itunes. In the past I've waited several hours in the vain hope that the icon to leave the dock, thus enabling me to relaunch. I have not had any success with this approach. The only solution I've found is to restart the entire computer, obviously less than ideal.
    The truly irritating thing is that according to the Activity monitor and the terminal command $ top (which the Activity Monitor is based on IIRC), iTunes isn't running, but according to Option + Apple + Escape and the Dock it still is. However, any attempt to relaunch the app using either Option + Apple + Escape or the Dock does nothing. Apparently there is some subroutine that is running that does not quit along with the rest of the app and tells at least part of the system that itunes is still running and won't let me launch a second instance of it.
    Does anyone know what this subroutine is so that i can find it and kill it from the terminal or activity monitor? Is there anything I can do other than restart my entire system when this happens (complete BS if this is the case)?
    I've run into this problem on my 400MHZ iMac DV SE, 400MHZ PowerMac G3, 800MHZ PowerBook G4 DVI, 867MHZ PowerMac G4, and my first gen MacBookPro, so I know it's not bad ram, or a hardware problem.

    Since no one else is having this problem, or at least no one has had any suggestions I would like to know if anyone knows what the process usbmuxd is supposed to be for. I've run into the crash that won't quit and can't be restarted issue again. Out of frustration I've taken to killing processes from the terminal and seeing if that will help. It did for one of my hangs after the initial crash, but not the second time. One of the processes I've killed is this usbmuxd which immediately restarts itself and places the following message in the console:
    "usbmuxd-167 built for iTunesEightTwo on May 11 2009 at 13:36:48, running 32 bit"
    is it possible that the reason I can't get iTunes out of the dock and cannot relaunch it is because some message between iTunes and this usbmuxd didn't get passed correctly and it continues to relaunch itself waiting for itunes to respond?

  • Restoring iTunes after computer crash

    One day, I hooked my iPod up to my computer and it told me that a couple hundred songs were not authorized to play on this computer. Then it removed them from my iPod, but left them in iTunes. Those songs were every single purhcase I had ever made on iTunes.
    Later that day, my computer started freaking out. I made a copy of that purchased music to CD, and a few minutes later, my computer crashed and burned.
    After reinstalling Windows XP Professional, I imported the burned music into iTunes. However, when I hook up iPod to the computer, it tells me that iPod can only sync to one library at a time, and do I want it to erase everything on the iPod (all of my music that wasn't purchased at iTunes) and overwrite it with everything on my current library. I tell it no, because I don't want it to erase everything on the iPod.
    So how do I get to it actually "sync" by adding what's on my iPod to my iTunes library, and what's in my iTunes library to my iPod, without having to erase everything on my iPod?
    Dell Dimension 8300   Windows XP Pro  

    "how do I get to it actually "sync" by adding what's on my iPod to my iTunes library, and what's in my iTunes library to my iPod....."
    You can't sync or drag your non iTMS music back directly from an iPod to iTunes. The transfer of non iTMS content is designed by default to be one way from iTunes to iPod, the transfer of purchased content has recently been introduced with iTunes 7. However there is a manual method of accessing the iPod's hard drive and copying songs back to iTunes on Windows posted in this thread: MacMuse - iPod to iTunes
    If you prefer something more automated then there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod, this is just a selection. Have a look at the web pages and documentation for these, they are generally quite straightforward. As iTunes 7 is just out some of these may not have caught up with it yet though I haven't experienced any problems with the Mac software I use.
    YamiPod Mac and Windows Versions
    iGadget Windows Only
    iPodCopy Mac and Windows Versions
    iPod Access Mac and Windows Versions
    PodUtil Mac and Windows Versions
    iPodCopy Mac and Windows Versions
    PodPlayer Windows Only
    CopyPod Windows Only
    For more on the new function in iTunes 7 look under under File, "Transfer Purchases from iPod" which transfers iTMS purchases. A paragraph on it has been added to this article: How to use your iPod to move your music to a new computer
    "....without having to erase everything on my iPod?"
    If your iPod is set to update automatically you just need to take care when connecting back to your computer and an empty iTunes. You will get a message that your iPod is linked to a different library and asking if you want to link to this one and replace all your songs etc, press *No* (or "Cancel" if you are using iTunes 7). Pressing "Yes" (or Erase and Sync in iTunes 7) will irretrievably remove all songs from your iPod. Your iPod should appear in the iTunes source list from where you can change the update setting to manual and use your iPod without the risk of accidentally erasing it. In iTunes 7 Check the "manually manage music and videos" box in Summary then press the Apply button. Don't uncheck Sync Music it will be unchecked by default when you choose the manual setting: Managing content manually on iPod
    Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync again.

  • Getting a stack trace after a crash using a command ant build

    I am trying to do some maintenance on a large project (about 300 files) that cannot be built using an IDE like eclipse or netBeans (the build instructions are in a build.xml file and is built using ant) and after installing the MacOSX 10.5.7 update yesterday the application crashes every time one of my SwingUI elements come up. I don't know of any way for me to get the stack trace so I can try and figure out what's going on. I did test the application on a non intel based mac and it does not crash when the dialogs come up so I think the bug is specific to the update. Can anyone tell me an easy way to get this stack trace? Thanks.

    ender2012 wrote:
    I am trying to do some maintenance on a large project (about 300 files)That's not particularly large.
    that cannot be built using an IDE like eclipse or netBeans (the build instructions are in a build.xml file and is built using ant) I know that Intellij can build using an ant file, so I'd expect that Eclipse and NB can do the same.
    and after installing the MacOSX 10.5.7 update yesterday the application crashes every time one of my SwingUI elements come up. I don't know of any way for me to get the stack trace so I can try and figure out what's going on.Regardless of whether you build in the IDE or on the command line, you should be able to attach a debugger to the app and set a breakpoint on any exception. Even if you don't do that, when it crashes, there should be a stack trace. Unless the problem is in the JVM itself--improper .so file, for example.

  • Scared to sync my iPhone with iTunes after computer crash

    Hi - my computer crashed and I had to reinstall iTunes.  I used a program and recovered all of my music and apps from my iPhone 4S and then added a few new music files.  I'd like to sync my phone with iTunes to get these new music files on it (they are from a CD, not an iTunes purchase).  I'm afraid that when I sync, it will erase all of my pictures since there aren't any pictures on iTunes.  How can I be sure this won't happen?  I want to use iTunes for syncing and back up but I'm scared to, because it might erase everything.  I have already checked off the "do not automatically sync."  But once I press that sync button, what might happen to my pictures? 
    Help and thanks!!!

    See:
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
    Sync Your iOS Device with a New Computer Without Losing Data - How-To Geek
    Recovering your iTunes library from your iPod or iOS device: Apple Support Communities
    What photos? If they are in your phone's camera Roll transfer then to the computer by
    iOS: Importing personal photos and videos from iOS devices to your computer
    If they were synced to the hone from the computer then you need a third-party program like PhoneView.

  • Cant instal my itunes after resetting pc to factory settings

    After resetting my pc back to factory settings I downloaded itunes but it wont instal. I get a message saying contact application vendor to verify this is a valid windows installer. Can anyone help please

    Although you're getting a different error message, try the procedure from the following user tip:
    "The administrator has set policies to prevent this installation" error messages when installing iTunes for Windows on Windows Vista and Windows 7 systems

Maybe you are looking for

  • Possible to get iMac repaired without going to the apple store?

    i recently purchased a 24" imac and called apple to request a repair due to a stuck pixel in the middle of my screen, very distracting, and i got a case number but was told that i need to take it to an apple store to have it looked at first and then

  • 3D pie chart in a report

    Hi all, I need to add a 3D pie chart in a report, and I don´t find it in the Chart Wizard. Anyone knows if is it possible to do this? Thanks in advance.

  • 3rd Party Process - Need to create DO

    Dear All, I'm trying to setup the 3rd party process for my current client. Here's my scenario. 1. Create SO, which auto triggers PR. Using item category TAS, which is auto determined from material master item category group-standard 2. Conver PR to P

  • UnsatisfiedLInkError: No muxer in java.library.path

    I get the following error when I try to start weblogic java.lang.UnsatisfiedLinkError: no muxer in java.library.path at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1249) at java.lang.Runtime.loadLibrary0(Runtime.java:470) at java.lang.System.l

  • Mac 10.7.5 and Adobe Photoshop elements 13/Premiere 13

    I have Mac 10.7.5. I presently have Adobe Photoshop 11/Premier 11 I purchased Adobe 13 for an upgrade. Will I be able to upgrade smoothly or do I need 10.8? Thanks Michael