Re-install of Labwindows contains an DLL load error

I am trying to re-install LabWindows 7.1.1.  After installation, everytime I try to use the library, I get at least 2 or 3 messages that state Automation Support DLL not found.  After that, the routine works correctly.  Anybody know what I lost?

David,
What is "the library" you are trying to use?
Do you know which line of code (which function call) generates the error?
What is the exact error message? 
Maybe this or this link may help you a little. All I could find from NI Search.
S. Eren BALCI
www.aselsan.com.tr

Similar Messages

  • DLL loading error (code -17004)

    When I try to run the test sequence, I receive the attached error message.
    I have the proper search directory and I can find it with explorer.
    What else can the problem? What should I do to run the sequence?
    Thanks a lot: Adalbert
    Attachments:
    error.JPG ‏132 KB

    Adalbert,
    Try running your TestStand sequence with the code module specifying your DLL using an "absolute path". It may be that your DLL is not loading because in turn this DLL (DLL1.dll) is trying to call another DLL (dll2.dll) that it cannot find.
    David Mc.
    National Instruments

  • Error while running User Profile Import - Stopped-extension-dll-load

    Hi guys,
    I'm receiving below error message in event viewer while running user profile import for the first time with event ID 6166:
    The management agent "MOSS-" failed on run profile "MOSS_EXPORT_". The run step stopped because a configured extension for this management agent could not be loaded.
    User Action
    Verify that the extension is located in the Extensions directory. If the extension is present, confirm that the version of the .NET framework  that can run the extension is installed on the server and that a supportedRuntimes  entry in the configuration
    files specifies that version. The synchronization  engine will not be able to load an extension that is built with a newer version  of the .NET framework than the version of the .NET runtime it is hosting.
    At the same time , in miisclient "stopped-extension-dll-load" message for MOSS_EXPORT,MOSS_FULLSYNC, MOSS_DELTASYNC. Can any help to let me understand what will be causing this issue?
     Farm version: 14.0.6137.5000

    Hi Sarath,
    For this issue, I recommend verify the things below:
    Check if the connection name of the Synchronization Connections created in User Profile Service Application has more than 55 characters. If yes, please rename the connection with less than or equal to 55 characters.
    Check if the length of the full path to the dll called “Microsoft.Office.Server.UserProfiles.ManagementAgent” is
     greater than 160. If yes, then we can move the extension Microsoft.Office.Server.UserProfiles.ManagementAgent.dll to the folder c:\windows\assembly\GAC_MSIL and then do an IISRESET.
    If above cannot work, please check ULS log for more detailed error message.
    Best regards,
    Victoria Xia
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • PXI RT 8.6 crash with error lvrt.dll load address 0x1924000

    I have an application developed with LabView RT 8.6 that run 24h/day and randomly crash evry 3-10 day with this error:
    LVRT.DLL load address 0x1924000. Attached I put log file available after restarting PXI.
    I dont found any information on this error, and it's very hard to found the soluction... any idea?
    Attachments:
    lvrt_err_log.txt ‏66 KB

    Application was developed with LV 8.6, actually I have installed a LV 8.6.1 in my lap top where I develope the application. I attach some print screen of configuration of PXI.
    Application running on PXI consist of several never-ending loop, one of this is a time-critical loop where I from CAN, DAQ, and I send data via CAN. There is other Hardware-timed loop that comunicate via TCP/IP with PLC and with host computer (but application on host is not developed with LV, use a client socket to comunicate with PXI for reading data).
    Error Log show alwayis the same error, and for my opionon, there is no relation for when the event occur, can be in any moment.
    Application in pxi has some VI that are published as web service for diagnostic only, but there is no any interaction with user, (no keyboard and no mouse), it's a silent application, that read some encoder, calculate speed and aceleration, generate some output and send all data acquired via tcp/ip... 24 h/day.
    Strange is that error position is always at 0x1924000, in all the error log!
    Unfortunatly system is used all the day, and it's very far from office, so debug can be done only at specific day, when production is off... and internet is unavailable...
    Enabling the debug mode, It's possible to have more information about the problem without changing the performance of the system?
    Thank's for you help!
    Nicola
    Attachments:
    img1.JPG ‏36 KB
    img2.JPG ‏28 KB
    img3.JPG ‏29 KB

  • LVRT.DLL load address: 0x02110000

    Hi,
    I have two PXI-8108 with the same aplication. Both PXI have the same problem. When I run the software or sometime after begun the PXI reboot due to system error. At one of them return a log message LVRT.DLL load address: 0x02110000.
    I already reinstall the Labview RT 2011 at PC and PXI.
    What else can I do?
    Thanks

    Hi Schimitz,
    I note you are using LabVIEW 2011, have you ever install any LabVIEW install LabVIEW 2011 f2 patch?
    http://joule.ni.com/nidu/cds/view/p/id/2657/lang/en
    If you don´t do it yet i recommend do it and after reinstall RT software at PXI-8108.
    Best regards,
    Abel Souza
    Applications Engineering
    NI Brazil
    Abel Souza
    Engenheiro de Aplicações
    National Instruments Brasil

  • ImportError: DLL load failed: The specified procedure could not be found.

    Hi,
    I am new to Python. I'd like to try and connect to Oracle 10.2.0.4 database using Python. I have Oracle 10g client installed. When I try to import cx_Oracle I get the error below.
    If anyone can help me how to solve this, I will be grateful.
    C:\Users\milivojm>set path
    Path=C:\Oracle\OraClient10g\bin;C:\Oracle\OraClient10g\jre\1.4.2\bin\client;C:\O
    racle\OraClient10g\jre\1.4.2\bin;C:\Oracle;C:\Oracle\OraOdac11g;C:\Oracle\OraOda
    c11g\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program File
    s\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\CollabNet Subversion;C:\P
    rogram Files\jZip;C:\Program Files\QuickTime\QTSystem\;D:\Python\
    C:\Users\milivojm>python
    Python 2.6.2 (r262:71605, Apr 14 2009, 22:40:02) [MSC v.1500 32 bit (Intel)] on
    win32
    Type "help", "copyright", "credits" or "license" for more information.
    import cx_OracleTraceback (most recent call last):
    File "<stdin>", line 1, in <module>
    ImportError: DLL load failed: The specified procedure could not be found.
    exit()C:\Users\milivojm>dir c:\Oracle\OraClient10g\bin\
    Volume in drive C has no label.
    Volume Serial Number is B0A4-2659
    Directory of c:\Oracle\OraClient10g\bin
    21.11.2008 15:29 <DIR> .
    21.11.2008 15:29 <DIR> ..
    06.03.2004 03:19 108.920 cemutls.exe
    27.01.2004 04:49 86.124 COREJAVA.DLL
    21.11.2008 15:28 1.024 emca.bat
    08.03.2004 17:15 52.552 extjob.exe
    08.03.2004 17:15 52.552 extjobo.exe
    07.02.2004 22:52 28.672 launch.exe
    21.11.2008 15:27 659 lbuilder.bat
    27.01.2004 06:47 81.948 LCSSCAN.EXE
    27.01.2004 06:46 43.064 LMSGEN.EXE
    08.03.2004 17:12 16.656 loadpsp.exe
    06.03.2004 03:20 96.592 lsnodes.exe
    27.01.2004 06:46 68.556 LXEGEN.EXE
    27.01.2004 06:46 276.908 LXINST.EXE
    21.11.2008 15:28 484 mkstore.bat
    21.11.2008 15:27 1.149 netca.bat
    21.11.2008 15:27 108 netca_deinst.bat
    08.03.2004 17:59 188.416 oci.dll
    08.03.2004 17:16 32.768 ociw32.dll
    10.02.2004 13:13 110.592 ODBTREEVIEW.OCX
    21.04.2005 04:13 864.256 oip10.dll
    21.04.2005 04:05 75.500 oip10.tlb
    21.11.2008 15:27 525 olsadmintool.bat
    21.11.2008 15:27 546 olsoidsync.bat
    10.02.2004 13:12 73.728 OO4OADDIN.DLL
    10.02.2004 13:12 69.632 OO4OCODEWIZ.DLL
    10.02.2004 13:12 20.480 OO4OCODEWIZ.EXE
    21.04.2005 04:05 24.576 oraansi10.dll
    21.11.2008 15:27 34 oracle.key
    05.03.2004 19:15 20.480 OracleAdNetConnect.exe
    05.03.2004 19:15 24.576 OracleAdNetConnectRCUS.dll
    05.03.2004 19:16 24.576 OracleAdNetTest.exe
    05.03.2004 19:16 24.576 OracleAdNetTestRCUS.dll
    08.03.2004 16:39 1.909.008 oraclient10.dll
    21.04.2005 04:14 241.664 oraclm32.dll
    10.03.2004 16:09 749.840 oracommon10.dll
    27.01.2004 04:49 688.400 ORACORE10.DLL
    06.03.2004 03:16 57.616 oradbcfg10.dll
    10.02.2004 13:17 386 oradc.lic
    21.04.2005 04:13 102.400 oradc.ocx
    08.03.2004 16:39 4.235.536 orageneric10.dll
    14.03.2004 10:43 327.952 orahasgen10.dll
    26.03.2004 17:11 77.824 oraimr10.dll
    05.03.2004 19:14 45.056 orajmisc.dll
    27.01.2004 17:16 278.800 oraldapclnt10.dll
    27.01.2004 17:16 258.320 oraldapjclnt10.dll
    27.01.2004 06:46 37.136 ORALXLED.DLL
    05.03.2004 19:25 946.448 oran10.dll
    05.03.2004 19:15 37.136 oranad10.dll
    05.03.2004 19:11 33.040 oranbeq10.dll
    05.03.2004 19:12 24.848 ORANCDS10.DLL
    05.03.2004 19:11 94.480 orancrypt10.dll
    05.03.2004 19:11 24.848 oranhost10.dll
    05.03.2004 19:11 33.040 oranipc10.dll
    05.03.2004 19:12 143.632 oranjni10.dll
    05.03.2004 19:11 180.496 oranl10.dll
    13.03.2004 03:40 74.000 oranldap10.dll
    10.03.2004 20:42 33.040 oranldapj10.dll
    27.01.2004 06:45 586.000 ORANLS10.DLL
    12.03.2004 01:23 1.544.353 oranmemso.dll
    05.03.2004 19:11 33.040 orannmp10.dll
    05.03.2004 19:12 28.944 orannzentr10.dll
    05.03.2004 19:12 28.944 ORANNZMCS10.DLL
    05.03.2004 19:11 962.832 orannzsbb10.dll
    05.03.2004 19:12 53.520 oranoncj10.dll
    05.03.2004 19:10 221.456 oranro10.dll
    05.03.2004 19:12 37.136 oransgr10.dll
    05.03.2004 19:11 49.424 orantcp10.dll
    05.03.2004 19:12 49.424 ORANTCPS10.DLL
    05.03.2004 19:11 24.848 orantns10.dll
    05.03.2004 19:13 28.944 oranzts10.dll
    06.03.2004 03:16 209.168 oraocr10.dll
    14.03.2004 20:50 147.728 oraocrb10.dll
    21.04.2005 03:54 438.272 OraOLEDB10.dll
    21.04.2005 03:54 1.608 OraOLEDB10.tlb
    21.04.2005 03:55 24.576 OraOLEDB10us.dll
    21.04.2005 03:53 131.072 OraOLEDBgmr10.dll
    21.04.2005 03:54 32.768 OraOLEDBpus10.dll
    21.04.2005 03:45 24.576 OraOLEDBrfc10.dll
    21.04.2005 03:46 24.576 OraOLEDBrmc10.dll
    21.04.2005 03:53 139.264 OraOLEDBrst10.dll
    21.04.2005 03:43 24.576 OraOLEDButl10.dll
    21.11.2008 15:28 483 orapki.bat
    08.03.2004 17:07 1.052.944 ORAPLP10.DLL
    08.03.2004 17:06 2.867.472 ORAPLS10.DLL
    04.02.2004 00:10 28.944 ORASLAX10.DLL
    27.01.2004 06:46 69.904 ORASNLS10.DLL
    11.03.2004 21:35 483.600 ORASQL10.DLL
    09.03.2004 21:46 61.712 orasrvm10.dll
    06.03.2004 03:17 143.632 orasrvmhas.dll
    27.01.2004 06:45 78.096 ORAUNLS10.DLL
    27.01.2004 04:49 28.944 orauts.dll
    27.01.2004 04:49 830 orauts.sym
    08.03.2004 16:39 24.848 oravsn10.dll
    03.02.2004 07:56 10.240 orawsec9.dll
    03.02.2004 23:58 1.473.868 ORAXML10.DLL
    30.09.1999 17:43 2.478 orclcontainer.bmp
    30.09.1999 17:43 2.478 orclcontext.bmp
    03.08.1999 19:00 246 orcldbserver.bmp
    30.09.1999 18:10 3.310 orclnetservice.bmp
    24.02.2004 13:11 57.344 OsUtils.dll
    10.03.2004 19:17 60.280 sclsspawn.exe
    21.11.2008 15:29 321 selecthome.bat
    21.11.2008 15:28 266 selecthome.bat.oo4o
    21.11.2008 15:29 55 selecthome.bat.oraoledb
    27.10.2004 10:14 434.176 sqora32.dll
    27.10.2004 10:16 65.536 sqoras32.dll
    27.10.2004 10:16 32.768 sqresus.dll
    21.11.2008 15:28 3.433 targetdeploy.pl
    05.03.2004 19:17 37.084 TNSPING.EXE
    21.11.2008 15:28 260 trcasst.bat
    30.11.1999 12:32 145.408 unzip.exe
    16.07.1998 18:36 104.448 zip.exe
    112 File(s) 25.228.632 bytes
    2 Dir(s) 8.552.009.728 bytes free

    You have oracle 10g and python 2.6. Are you sure you installed the cx_Oracle version that is compatible with those particular Python and Oracle's versions? (It comes in several flavours so you need to be sure you installed the right one).

  • Re: cx_Oracle DLL load failed

    I am having a problem with cx_Oracle module for Python:
    I have multiple Oracle Clients installed. I am only interested in accessing the 10g with Python.
    I'm running Python 2.7.2 (python-2.7.2.msi)
    I've installed cx_Oracle for Python 2.7 and Oracle 10g (cx_Oracle-5.1.1-10g.win32-py2.7.msi)
    I thought placing the 10g path at the front of the PATH would fix my problem.
    My last check is to verify the %PATH% environment setting is changed via Control Panel > System > Advanced system settings... curses my company has me locked out!!!
    import cx_Oracle
    Traceback (most recent call last):
    File "<pyshell#1>", line 1, in <module>
    import cx_Oracle
    ImportError: DLL load failed: The specified procedure could not be found.Path:
    echo %PATH%
    c:\Oracle\10g\FullClient\bin;C:\Program Files\Oracle\jre\1.1.7\bin\;C:\Oracle\8.0\jdk\bin\;C:\Oracle\8i\bin\;C:\Oracle\8.0\BIN\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files\Windows Imaging\;C:\Program Files\Common Files\Roxio Shared\DLLShared\;C:\Program Files\Common Files\Roxio Shared\10.0\DLLShared\;C:\Program Files\ActivIdentity\SecureLogin\;C:\Oracle\10g\FullClient\bin\;C:\Program Files\Axalto\Access Client\v5\;C:\Program Files\1E\SMSNomad
    I recall that to get Python talking to Oracle on my personal laptop I needed to install Oracle Instant Client.
    I’m not sure if that is required.
    Any ideas would be much appreciated,
    -Greg
    Edited by: 913250 on Feb 9, 2012 8:12 AM

    Not experienced with the windows implementation, only on linux ... but maybe it may help ...
    cx_Oracle is only the bridge between python and the oci interfaces of Oracle, an exposure of the c-api's towards python.
    On linux you must set the LD_LIBRARY_PATH variable to the location where the oracle client libraries can be found. (typically something linke libclntsh.so.*). So ... I guess that on a windows environment the client dll's should be in the path (%PATH%) ... Hope somebody can confirm or correct this. Maybe it may help ...

  • Nokia BBA DLL load connected in non-compatible usb...

    Dear Guys, 
    I tried to update my Nokia N95 software, I connected it via Nokia orginal USB cable, when the updating start it wrote 15 minutes remains, and after that my devices hang and this error raised on the tray
    "nokia BBA DLL load connected in non-compatible usb mode"
    the software updater shows me steps which are turn off my device and reconnect it and press ok.
    I did, but it this done many times 
    I have XP service P3 Prof.
    How I will install the update??
    Please Help me! it is urgent.
    Thanks in advance
    Mohammad Abu Hmead

    I'm new to this but i think the dll file is not working try downloading the BBA dll. file from dll.com or try searching in google for dll files when you find the website that gives you free dll file download that file to desktop and then add that to the folder in which all files are kept associated to connectivity.

  • "CTTheme.dll load fail

    I've had my Audigy 2 ZS Platinum for a couple months now and this has been an off/on problem the whole time. I get the wonderful error everyone seems to have gotten at some point from mediasource "[...] CTTheme.dll load failed" when I try to open the software (directly or by running media). After a long fight to finally get the software to work, the software works fine for a while. All of a sudden it will decide it's time to be useless again though. All I am doing is installing MediaSource (3.30.2.) then after allowing the auto restart I run the software once to make sure it installed properly. Normally it works the first try with the newer versions (version on CD has NEVER worked) and I set my associations then close the software. Now it's time to install the remote control support... Almost guaranteed the error comes. My first time around I finally got this to work after a week of trying 3-4 times a night to get the remote to install. I don't have the time for that now, and don't see why I should have to do so either. After browsing the forums for several hours I've found that there is no helpful information on how to fix this. I have already tried all of the uninstall/reinstall methods mentioned.
    FYI the problem has re-arisen due to my habbit of reformatting to clear garbage off my HD any time it gets too cluttered. All software/driver versions are ones recommended by creative's download selection system.
    My uninstall process:
    manually deleting
    C:\program files\Creative
    C:\documents and settings\USERNAME\application data\creative (or somewhere aroudnt here, this is off memory)
    Removing reg keys at
    HKCU\software\creative tech
    HKLM\software\creative tech
    HKLM\software\microsft\windows\current version\uninstall\creative
    CTTheme.dll version number 3..3.0
    What else is there that I could do to try and fix this? Is there any post install fix I can do that is more likely to work? I don't care how intensi've the procedure is I just want my hardware to actually work how it's supposed to.
    FYI all regular sounds work, just MediaSource fails. Audio Control Panel and the Remote Control setup window still function properly. Remote responds to volume, have not tested other buttons since re-install because I can't even get into the software to watch anything....Message Edited by sni'ves on 0-7-2006 0:20 PM

    Ok, yes... I used the word 'RMA' several times in my message. But I'm not having an RMA issue, its a support issue at this point. Basically I know that the hardware I have works, as I've successfully installed it in a secondary computer and verified that the I/O shows up in Creative's Entertainment Center properly and that it also functions (headphone autosense / remote control). However installing it in my primary system results in a useless I/O dri've, the creative software won't pick it up and nothing on it works. So since it does work on one computer the hardware must therefore function properly. Also with regards to my system, this problem exists immediatly after a clean format and rebuild of the system... so its not software.
    As it stands my present theory is that it is incompatible in some way with some part of my hardware. Therefore I'm trying to work with Creative to get a solution drawn up. The last response I received from them, they are suggesting an RMA... which will only waste a couple of weeks time.
    Anyway, I no longer recall the point I was trying to make in my original message at this point. Might have been something about don't give up, and don't let them convince you it can't be resolved or something like that. I know I won't, and they may very well grow to dislike me... but I paid for something and expect it to perform its function, just like anyone else in the world.
    I do hope they can help us both resolve our respecti've issues.
    Edit: Just a note, I love the card itself and the quality of sound it produces as well. Some games I play now make sounds that I didn't know were in the game. Now I just have to get the I/O dri've and it's capabilities to function on my current hardware. Also this is an X-Fi Fatalty.Message Edited by Teklord on 0-8-2006 04:27 PM

  • VBIOS.dll load failed

    Hi everyone,
    I just brought a MSI video card, the G4Ti4200-VTP (MS-8886).  After I have install the Live Update 2, a message pop up, "VBIOS.dll load failed".  I was unable to use any of the Live Update function.  Furthermore, when I try to see the MSI Information and MSI clock through the display option, the system crushed.  A message saying something like Run dll as AP .......  
    Please Help!!!!!
    My PC
    CPU 2.0 Intel
    OS Win XP
    RAM 512
    Mother board, Asus with SIS 648 chipset.

    I would recommend uninstalling the Live update feature software and just load the latest drivers from nvidia or look on the internet for other beta drivers like the 40.72.
    You can find them at sites like http://www.xp-erience.org/
    Or better yet: http://www.guru3d.com/files/detonator/
    Forget about all that other stuff for now 8)

  • Vbios.dll load failed error

    i have an MSI G4MX440 graphics card and loaded  Msi live monitor and when winxp starts it gives me a vbio.dll load failed error.
    also, whenever I try using the monitor or Live update2 utility, i get the same...
    I also, installed the 3d turbo experience! program and whenever I start it, it freezes my comp.!
    please help someone, I am getting discouraged!
    I have tried downloading the newest versions of each to no avail.!!!! ?(

    Hey guys,
    It is very hard to follow everyones system. Lets have everyone get on the same drivers and I will work it with all of you from there.
    First get the latest Motherboard Drivers. Install them.  
    Then get the nVidia DetonatorFX Drivers. Install them.
    Then delete the file msicpl.dll from your windows directory.
    Uninstall the turbo3d and any other 3rd party software that is some sort of a video utility. Do not forget to uninstall Live Update also.
    If you need the extra features for overclocking etc. open notepad and copy this into it exactly as I have it quoted:
    Quote
    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINESOFTWARENVIDIA CorporationGlobalNVTweak]
    "Coolbits"=dword:ffffffff
    "NvCplEnableHardwarePage"=dword:00000001
    "NvCplEnableAGPSettingsPage"=dword:00000001
    Save it to your desktop with the name agpsetting.reg and run it.
    Now everyone test your vid cards and let me know which problems you are having.
    Take Care,
    Richard

  • The JSP container failed to load the TagExtraInfo class

    We are upgrading our system. We were using JSF 1.1 with WebSphere V6. Now we are moving to JSF 1.2 and Websphere V7
    I am getting the error below over and over in the WebSphere V7 environment, in the ear
    [8/30/10 8:30:20:402 EDT] 0000000e jsp W com.ibm.ws.jsp.taglib.TldParser endElement JSPG0235E: The JSP container failed to load the TagExtraInfo class [com.sun.faces.taglib.FacesTagExtraInfo] from META-INF/odyssey.tld
    The ear can be set up to use either the sun reference implementation 1.2 or the MyFaces 1.2 implementation.
    It is currently set up for the sun reference implementation. Should this change, or is there something else I am missing.
    Thanks

    Hi Wrisillito,
    Regarding to the error message you provided, since SSIS uses VSTA 2.0, we need to fix that one only if there is SSIS trouble. Visual Studio doesn’t really related to the VSTA install.
    Seems  you have problems while opening VSTA inside BIDS to edit SSIS scripts, so please  try one of these methods:
    A. Uninstalling SQL Server 2008 and Reinstalling it may fix the problem.
    B. If you can't do that try the manual approach credit to SSIS script.
    For more information and steps, please follow the
    blog about VSTA setup and configuration troubles for SSIS 2008 and R2 installations.
    Meanwhile you can refer to these threads with the same error as yours
    1. VSTA designer issues with Sql 2008
    2. The VSTA designer failed to load
    This is SSIS related issue, if this does not work please link to
    SSIS forum for further help. 
    Regards,
    Amber zhang
    TechNet Subscriber Support
    If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback
    here

  • TS1368 I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?

    I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?

    Click here and follow the instructions.
    (98897)

  • ITunes install errors: MSVCR80.dll and Error 7 (windows error 126)

    All of a sudden my iTunes stopped working, and I get the following error messages:
    1. the program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem
    and
    2. iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126).
    Now I've checked the forums and followed the advice of uninstalling all Apple applications, rebooting, and reinstalling iTunes.
    This is not working. I've tried installing as Administrator but doesn't make any difference at all.
    There must be a way to fix this? I'm not a tech geek but I want to avoid having to take my laptop back to factory settings to sort this out.
    Thanks

    ITunes tried to automatically update today and failed and then I was also getting the MSVCR80.dll error
    After trying many things I finally removed all Apple software
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support
    I was then able to finally successfully install the latest version of iTunes and the software installed correctly and the error went away.
    I hope this works for you as well.

  • I cannot install iTunes.  I get a Windows Error 126 and missing msvcr80.dll.  I've tried uninstalling and re-installing based on all the suggestions, but still have an issue

    I cannot install iTunes.  I get a Windows Error 126 and missing msvcr80.dll.  I've tried uninstalling and re-installing based on all the suggestions, but still have an issue.  I've removed all the services, tried moving the dll files as suggested, but I still have no success.  Spent all day on this issue.  I am running windows 7.

    Sorry to hear this isn't going smoothly for you. Try  Troubleshooting issues with iTunes for Windows updates. You may have seen some of the suggestions here before but is has taken some users more than one attempt.
    tt2

Maybe you are looking for