Re-install of stand-alone Acrobat 7.0 failed in Activation

I have a valid license for Acrobat 7.0.  When re-installing 7.0 on my new 32-bit machine, it seems like in 2013, Adobe makes it hard or impossible.
My own License no. doesn't work, so the main Adobe site allows you to download with a standard License no. for Acrobat Standard 7.0 ending in xxxx-2468.
The Activiation Information "Next" tab remains grayed out, and I was stuck.
Need some help from Adobe Tech support to unlock this, as it isn't fair I think.  My 30 minute chat with the Adobe support basically said to post this question on the forum.
Hopefully Tech Support will reply soon . . .

The Activation server was taken down for CS2 products by Adobe so Acrobat 7 won't activate.  There is a workaround provide by Adobe though.
Go here:  http://www.adobe.com/downloads/cs2_downloads/index.html
Download Acrobat 7 - Non-Activation version
Use the serial number that is listed on the web page.

Similar Messages

  • May I install a stand-alone Adapter engine for MI?

    I wonder if I can install a stand-alone Adapter engine (i.e. JAVA SE)  for MI?
    Points guaranteed. Thanks!

    Hi,
    no, that is not the usual way of handling data with MI.
    Well, MI exchanges data with the Middleware and the backend via SyncBO or Generic Sync. SyncBO is a data container that does the complete delta handling for example. The connection will be: XI receive data from an external system and stores that data in R/3. Then the SyncBO retrieves this data via GETLIST and GETDETAIL handlers and then the data comes down to the device with the next sync.
    BUT: the thing above is extremely drilled down - because of that it is only seen as a general answer. To discuss it more in depth, feel free to get in touch with me. The question I have in mind is till: what do you want to do with the XI connection.
    Regards,
    Oliver

  • Why when I install a stand alone trial version of Photoshop CS6 I get extended installation?

    Why when I install a stand alone trial version of Photoshop CS6 I get extended installation? I want only CS6.

    Hi Ilya Nazarenko,
    We would like to inform you that the installer for both Standard and extended version are same, as trial you get Extended version.
    If you have serial number for Photoshop Standard CS6, only then it would turn out to be standard version.
    Download CS6 products
    Thsnks,
    Atul Saini

  • Can I install Photoshop stand alone upgrade and Creative Suite on same machine?

    I'd like to be able to install my Photoshop CS6 Upgrade on the same machine as I am running Creative Suite 5.5.
    I'm using Windows 7 64bit.
    I have one running on a laptop and one on my main machine.. is this possible without conflicts?

    Hi Ned
    Thanks for the reply.
    I have CS5 Photoshop stand alone but it's not installed on same machine as Creative Suite 5.5.. its on a laptop. I use Photoshop mainly but don't want to stuff up my Creative Suite by installing CS6 as well..

  • Installing Java Stand alone Application on other PCs

    Dear All
    I am very new user to Java programming. I have recently finished developing basic Java Application that interacts with MySQL Database. The application does pretty standard database tranctions.
    Now i would like to install this finished appliction on other PCs as stand alone program (hope i am making myself clear here). Sort of I need to make an installation package that will install the Basic application and MySQL database on the the other PCS.
    Please desparetly help needed on this matter. I appreciate all your inputs Thank you.

    it would be much much easier if you weren't using MySQL to be honest. if you used a pure-java database such as Hypersonic, the database could just be bun dled as a bean with your application.

  • P6 stand alone and network installed to same pc

    Dear Member,
    i have a question, is it possible if i'm installing P6 stand alone version and P6 network version to the one desktop pc, and running together?
    please advice me, because our client requested to me, he want to install P6 stand alone and network version together to his pc, i told him, it's impossible. please make sure for this case
    thank you

    Hi,
    Yes, you can install P6 stand alone version and P6 network version to the one desktop pc.
    But, at a time you can login on a single database only, you just need to select the database at the time of Login i.e. when you are login to standalone, select the standalone database and when you want to login to network version, you need to select the network database.
    Regards,
    Amit
    Edited by: 1002854 on Apr 27, 2013 12:41 PM

  • R3trans finished (0012) after install stand alone gateway

    Hello,
    I'm hoping someone can help me with my issue.
    I just installed a stand alone gateway on our nwdi server.  The purpose for the gateway is because of RZ70.
    We are running on AIX/db2.  When I installed the same steps on our SAN environment, I did not encounter this error.
    Looks as if the gateway service is running but when I do an R2trans -d, I get an error.
    sapsdi:gtwadm 3> ps -ef | grep  gtwadm
      gtwadm  3604690        1   0 10:31:13      -  0:00 /usr/sap/GTW/SYS/exe/run/sapstartsrv pf=/usr/sap/GTW/SYS/profile/START_G04_sapsvsdi -D
      gtwadm  6750346        1   0 10:31:14      -  0:00 sapstart pf=/usr/sap/GTW/SYS/profile/START_G04_sapsvsdi
      gtwadm  8585250  6750346   0 10:31:14      -  0:00 gw.sapGTW_G04 -mode=profile pf=/usr/sap/GTW/SYS/profile/GTW_G04_sapsvsdi
    sapsdi:gtwadm 1> R3trans -d
    This is R3trans version 6.14 (release 701 - 26.01.09 - 12:46:00).
    2EETW169 no connect possible: "environment variable dbms_type is not set."
    R3trans finished (0012).

    Hello,
    I'm hoping someone can help me with my issue.
    I just installed a stand alone gateway on our nwdi server.  The purpose for the gateway is because of RZ70.
    We are running on AIX/db2.  When I installed the same steps on our SAN environment, I did not encounter this error.
    Looks as if the gateway service is running but when I do an R2trans -d, I get an error.
    sapsdi:gtwadm 3> ps -ef | grep  gtwadm
      gtwadm  3604690        1   0 10:31:13      -  0:00 /usr/sap/GTW/SYS/exe/run/sapstartsrv pf=/usr/sap/GTW/SYS/profile/START_G04_sapsvsdi -D
      gtwadm  6750346        1   0 10:31:14      -  0:00 sapstart pf=/usr/sap/GTW/SYS/profile/START_G04_sapsvsdi
      gtwadm  8585250  6750346   0 10:31:14      -  0:00 gw.sapGTW_G04 -mode=profile pf=/usr/sap/GTW/SYS/profile/GTW_G04_sapsvsdi
    sapsdi:gtwadm 1> R3trans -d
    This is R3trans version 6.14 (release 701 - 26.01.09 - 12:46:00).
    2EETW169 no connect possible: "environment variable dbms_type is not set."
    R3trans finished (0012).

  • Acrobat Pro XI Failed to Install-again

    I have followed instructions to the last detail. Installation failed on "Running Package Scripts" - I signed out of the "creative cloud" - tried it again - "Installation failed on "Running Package Scripts" . I then shut down my computer & restarted my computer & followed the steps again. Installation failed on "Running Package Scripts" again. I have waisted hours & perhaps days - of time trying to get this software "from the cloud" - I would respectfully request a working piece of software - fully registered - that "will instal properly" -

    What operating system? A key to installation of software is to login as the administrator and disable anti-virus during the install. The installation processes for CS and CC systems are a bit different than for the stand-alone Acrobat and you should get confirmation from the CC forum for your needs. I am not that familiar with CC, but CS has a set of procedures that are needed to install Acrobat (after the rest of CS). I might be wrong, but that is why I am directing you to the CC forum.

  • Stand-Alone exe not seeing my VISA instruments

    Hello, I am attempting to build a standalone installer application from my VI using LV 7.1 on a Win 2k machine. I have gone through the build application wizard making sure to enable hardware configuration checkbox and select the desired VISA TCP/IP instruments from the list. I am able to build the application without errors and install the stand-alone app on a new PC without LV installed. When I try and run the app, I do not see my TCP resources.
    I have tried to install the NI-VISA runtime ver 4 with no success.
    Now, when I was installing the app on the new PC, I did recieve an error saying that MAX wasnt avalible. So is there a way to get MAX without installing Labview? Is there someplace on NI's website that allows you to download just the MAX. I would think that the whole purpose of building a standalone application is to NOT have to install labview and therefore MAX.
    So what am I missing here? Any help would be great.

    I have done some additional digging and here are my results. On my front panel I have a VISA Resource Combo box that selects which instrument I want to use over ethernet (they are both Agilent RF sources). In the visaconf.ini file on my development PC, I see that the aliases for my instruments TCPIP0::xxx.xxx.xxx.xxx::instr0::INSTR are present. There is also a TCPIP-RSRCS section in the config file with more info relating to the TCPIP0 instrument.
    On my target PC with only my stand-alone application installed (and no LV), my visaconf.ini file doesnt say a thing about TCPIP0. There is no TCPIP-RSRCS section in the file either. This probably explains why I am not seeing my Agilent instruments in the standalone application.
    I do have the MAX configuration file (.nce) but I see no obviously way to load this file into my stand-alone application. I think I bundled it with the installer, but I am really stuck.
    Any thoughts???
    Attachments:
    Labview MAX error.jpg ‏21 KB

  • Stand alone application with VISA

    Hello,
     I build a stand alone installer application from my VI using LV 7.1 VI which contains some VISA serial communications with a standard RS232 port.  In build application wizard settings I checked the Serial Port Suport in Advanced settings in Installer .When I installed this stand-alone app on a new PC without LV installed the communication didn´t work: Error -1073807298 - Could not perform operation because of I/O error.
    I don't know if I have to install something else on the target machine. I have seen some topics in discussion forum about the VISA run machine. I imagined it would be included in the installation I had created. If someone could help me I would thank.
    Celia

    Hi Celia,
    You might check to make sure that the VISA Resource Name you are providing in your application is the same as the name the new machine is using.  If you build the application and it is looking for a specific resource that does not exist on the new machine, you might see an error similar to this one.
    Donovan

  • Errors in stand-alone Sharepoint 2013 trial

    Hi there, I have installed the stand-alone trial of Sharepoint 2013 on our Windows Server 2008 R2 Enterprise machine, Service Pack 1.
    When I click on the 'Sites' link at the top right, I get the error:
    "Not Found
    The requested URL /my/_layouts/15/MySite.aspx was not found on this server."
    And I get similar errors for any of the links at the top right: 'Newsfeed' and 'SkyDrive'
    I have four Web Applications set up:
    SharePoint - 20103 http://cr-dc-vygr01:20103/
    20103
    SharePoint Central Administration v4 http://cr-dc-vygr01:29235/
    29235
    Testing456 http://cr-dc-vygr01:8888/
    8888
    SharePoint - 9665 Currently Selected http://cr-dc-vygr01:9665/
    9665
    Could you please advise what might be wrong?
    Many thanks,
    Simon

    look like your MySite host and UPA is not configured properly.
    Central Admin > Application Management > Manage Services Application...On this page check if the User Profile service is listed their.  Click on USer profile services, and check the configuration.
    Follow the instruction below to configure Mysite and UPA
    http://www.c-sharpcorner.com/UploadFile/Roji.Joy/how-to-configure-user-profile-service-and-my-site-in-sharepo/
    http://www.c-sharpcorner.com/UploadFile/Roji.Joy/configure-user-profile-service-and-my-site-in-sharepoint-201/
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • ITunes 7.6 (or QuickTime stand alone) won't run on XP

    Dear friends in iTunes Land. I thought Mac SW was supposed to be user friendly but this is the worst install I've ever faught on an XP machine. Would appreciate any insight.
    ... I've done all the clean uninstall/install... Install Quicktime stand alone. All of the suggested items on the list (first few pages) and still I get a Windows 'Send Error Report' popup when I launch either QT or iTunes. This is the Error Signature when I try to start Quicktime:
    EventType : BEX P1 : QuickTimePlayer.exe P2 : 7.50.61.0
    P3 : 4837c166 P4 : QuickTimePlayer.exe P5 : 7.50.61.0 P6 : 4837c166
    P7 : 0000130d P8 : c0000409 P9 : 00000000
    I don't know what to try next... except sell my new iPod on eBay.
    Thanks in advance,
    Jason

    The QuickTime problem will probably be causing the iTunes problem. (iTunes needs a properly functioning QuickTime in order to work correctly.)
    So let's try swapping out your existing QuickTime again, taking a few additional explicit precautions.
    Head into your Add/Remove programs. uninstall QuickTime.
    Next, we’ll manually remove any leftover program files and folders.
    1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
    2. In My Computer, open Local Disk.
    3. Open Program Files.
    4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
    5. Navigate to C:\Windows\system32\.
    6. Remove the files QuickTime.qts and QuicktimeVR.qtx. (If “Hide filename extensions for known file types” is enabled on the PC, then those two files will appear as “QuickTime” and QuickTimeVR”.)
    7. Restart your computer.
    Next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
    Switch off antivirus and antispyware applications prior to the repair install.
    Go into Add/Remove and select itunes. Click "Change" and then click "Repair".
    If the repair install goes through okay, restart the PC and try launching itunes again. Does it launch properly now?

  • How best to INSTALL my downloaded purchase of Lightroom 5 stand-alone ver. (NON-CreativeCloud) on my Macbook Pro OSX 10.9.5 ?

    So, I’ve just downloaded my purchase of Lightroom Photoshop 5. I bought it via Adobe.com and it’s the full desktop version, stand-alone software version.
    Important FYI:  Please note that I bought the non-CC Lr program to download.
    Question: How do I properly INSTALL it after downloading it onto my Macbook Pro using OSX (latest Mavericks ver. 10.9.5) ??
    I can only find installation instructions for Lr CC and mobile but not for the full, non-CC licensed desktop version which is what I have!
    Perhaps the above is the same step-by-step install process as my said Lr 5 but for whatever reason Adobe doesn’t say so anywhere that I’ve been able to find.
    Any help?
    T.I.A.!
    P.S. FWIW, I’m mostly asking because I’m just afraid to mess up something or install it wrong or in wrong place; I want to make sure I do it correctly so not to corrupt the installation or whatever, even though I’m fairly sure I know how. Double-checking for my own confidences/sanity…

    download the latest lr and install using your serial number,
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7
    Lightroom:  5.6| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Can Install Base be installed as a stand-alone module?

    Hi,
    Is Install Base always integrated with another module or can it be used as a stand-alone product?
    Thank You,
    Ellice

    I believe the answer is in Chapter 2 of the Implementation Guide at http://download.oracle.com/docs/cd/B53825_01/current/acrobat/121csiig.pdf
    HTH
    Srini

  • Can't install Lightroom 5 on a second computer, I am NOT a creative cloud customer, I am a stand-alone user.  How do I enter my serial number???

    I can't install Lightroom 5 on a second computer, I am NOT a creative cloud customer, I am a stand-alone user.  But when I try to install on my laptop, it always trys to sell me the monthly membership.  How do I enter my serial number in the second copy of lightroom?  It won't ask me for it, and I cannot enter it anywhere in the settings?  I am stuck

    You probably downloaded the Cloud version.  Get the licensed version thru the following linked page...
    Lightroom - all versions
    Windows
    http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
    Mac
    http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

Maybe you are looking for

  • How do I connect my time capsule to the internet wirelessly

    I recently moved to a house where the internet is provided wielessly. So I don't have access to the modem to hook up my Time capsule. Is there away I can hook it up with out connecting it to a modem? If so how might I go about doing so?

  • Mac Mini Wifi went from really bad to impossibly slow with Mavericks

    Is there anything I can do? I really need to use WiFi given my location. My Lenovo Laptop gets about 15 MBPS with speedtest.net but my Mac Mini in the exact same location barely gets 1 MBPS and that's after timing out about 3 times. This is completel

  • Grouping of Individual groups of Data Template in the RTF

    Hi All, We have a scenario where we may require the grouping of Individual groups of Data Template in the RTF. Lets say 1. I have group of Invoices with the Group Name G_INV 2. I have a list of Payments done for the Invoices under G_PAY 3. I also hav

  • How do you save the screen plot on an 8753ES network analyser using Labview 7.0?

    I need the screen to be saved in the .FP format to save space (not a jpeg) and saved on my PC. All information is required, such as marker levels

  • Oracle9i and XSLT 2.0

    As far as I understand the PL/SQL XSLT transformer in Oracle9i does not support XSLT 2.0. I need XSLT 2.0 as I need to split up 1 large XML document in small ones (each representing a table) and then import the data into the database (using DBML_XMLS